芦竹碱法合成DL-色氨酸

以芦竹碱和海因为原料,经缩合、水解合成DL-色氨酸,收率达41.6%。缩合反应的最佳工艺条件为:反应时间5 h、碘甲烷与芦竹碱的摩尔比为1.2∶1、乙醇钠与芦竹碱的摩尔比为0.8∶1、原料芦竹碱与海因的摩尔比为0.9∶1;水解反应的最佳工艺条件为:NaOH浓度为1.5 mol/L、水解时间10 h、吲哚甲基海因的浓度为0.2 mol/L、温度为100℃。     

高锰酸钾氧化法合成2-甲酸吡啶

以2-甲基吡啶为原料,水为溶剂,经80℃下高锰酸钾氧化和乙醇重结晶得到2-甲酸吡啶;采用红外光谱仪和核磁共振谱仪表征了目标产物的结构;考察了高锰酸钾用量、溶剂用量和反应时间对产物收率的影响,讨论了重结晶试剂的选择,进而确定了合成2-甲酸吡啶的较优条件.结果表明:以水作反应溶剂,控制原料和高锰酸钾的摩尔比为1∶2.3时,反应时间为5~6 h,以乙醇重结晶,目标产物的总收率达79.7%.     

1-羟基苯并三唑的合成工艺研究

研究了以邻硝基氯苯和水合肼为原料 ,在微正压下采用蒸馏分水工艺合成 1 羟基苯并三唑的工艺过程。讨论了溶剂、原料摩尔比、反应进间、反应温度等因素对反应的影响 ,最适宜操作条件为 :邻硝基氯苯与水合肼的摩尔比为 1∶4、溶剂正庚醇用量是邻硝基氯苯质量的 90 %、反应温度 1 1 8℃、反应时间 5h ,产品收率达 98.7%。     

含咪唑基的铜配合物催化蔗糖水解研究

合成了一种含双咪唑功能团的铜配合物,研究了双咪唑、组氨酸以及咪唑-丙氨酸铜配合物在较温和条件下(70 ℃,pH=7.0)的Tris(三羟基氨基甲烷)-H⁺缓冲溶液中对蔗糖水解的催化作用。研究了金属铜离子、咪唑、氨基酸3类功能团的组分配比以及实验条件如温度、pH值、反应时间等因素对催化反应的影响。结果表明：咪唑、氨基酸与铜离子在物质的量的配比为1∶1∶1时,催化效果最好;pH=7.0的中性溶液中,组氨酸铜配合物在70 ℃反应6 h后蔗糖的水解率可达80%以上。该论文也研究了十六烷基三甲     

醋酸锌催化串联反应合成2-氨基-3-氰基-4H-吡喃衍生物

以氰基查尔酮类化合物及丙二腈为原料,醋酸锌为催化剂,经串联反应合成了一系列2-氨基-4H-吡喃类衍生物。考察了催化剂、溶剂、反应时间及温度、原料摩尔比对产率的影响。确定的优化反应条件为:氰基查尔酮类化合物与丙二腈摩尔比为1∶1,醋酸锌(10(mol)%))作催化剂,二氯甲烷作溶剂,反应温度为30℃。此条件下,最高产率可达99.5%。     

ZrO_2-TiO_2/SO_4~(2-)催化合成马来酸二异戊酯

以马来酸酐和异戊醇为原料,复合型固体超强酸ZrO2-TiO2/SO24-为催化剂催化合成了马来酸二异戊酯。最佳工艺条件为:催化剂活化温度450℃,活化时间5 h,1.0 mol.L-1H2SO4,催化剂用量1.0 g,酸醇摩尔比为1∶4,回流分水70 m in,酯化率达98.72%。ZrO2-TiO2/SO42-具有良好的催化活性,可重复使用5次以上。     

磷酸硼固体酸催化合成邻苯二甲酸二乙酯的性能研究

以邻苯二甲酸酐和无水乙醇为原料,固体磷酸硼为催化剂,在醇酐比为4：1,催化剂用量为苯酐用量的20．3％,反应时间8h,反应温度80℃条件下合成邻苯二甲酸二乙酯（DEP）,探讨了影响催化剂催化效果的各个因素。实验表明,催化剂最佳的制备条件为：磷酸、硼酸和硫酸的摩尔比为1：1：1,焙烧温度为300℃,焙烧时间为3．5h。DEP最高产率可达75％。     

聚6-羟基己酸碱性条件下的水解反应研究

探究了碱性条件下聚6-羟基己酸水解反应的机理和最优化工艺条件。实验过程中选用碱度较大的氢氧化钠及碱度较小的碳酸氢钠作为反应试剂。研究表明:碱度不同,其反应机理,反应工艺条件亦不同。碱度越大,OH~-浓度越大,亲核基团[OH~-]直接进攻聚6-羟基己酸的酯基结构,使酯基键发生断裂反应,生成小分子的6-羟基己酸;反应工艺条件缓和,在100℃的集热式恒温加热磁力搅拌器中既可完全解聚。碱度大的氢氧化钠参与反应的最优化工艺条件:氢氧化钠/聚6-羟基己酸摩尔比为4.4,乙二醇/聚6-羟基己酸摩尔比为6.5,水用量100g,催化剂0.1g,反应时间2h,反应温度100℃条件下,6-羟基己酸产率达到84.07%;碱度小的碳酸氢钠钠参与反应的最优化工艺条件:碱度越小,OH~-浓度越小,在反应初期亲核基团[-OCH_2CH_2OH]占主导地位,发生醇解反应的概率大,整个反应体系为醇解反应与水解反应相互促进进行;反应工艺条件苛刻,须在180℃密闭高压釜中完全解聚。碳酸氢钠/聚6-羟基己酸摩尔比为1.1,乙二醇/聚6-羟基己酸摩尔比为3,水用量100g,催化剂0.1g,反应时间1h,反应温度180℃~190℃条件下,6-羟基己酸产率达到90.38%。在整个反应系统中,乙二醇作为溶剂来使用。     

4-二甲氨基巴豆酸的合成工艺研究

以N,N-二甲基氨基乙醇为原料,经TEMPO氧化、膦酰基乙酸三乙酯活化酯化、水解三步成功合成了4-二甲氨基巴豆酸,总收率81.2%。优选了TEMPO-Na Br-Na Br O3-Na NO2催化体系,确定甲酸乙酯为最佳溶剂,该步收率90.5%;研究了反应条件对酯化反应的影响,确定最佳条件为室温下,反应2h,二氯甲烷为溶剂,N,N-二甲基氨基乙醛、磷酰基乙酸三乙酯、氢化钠三者摩尔比为1∶1.5∶1.5,收率97%;水解反应采用盐酸甲醇溶液代替盐酸水溶液调节p H,选用体积比为乙腈∶丙酮=5∶1的混合溶剂搅拌析晶,收率92.5%。     

柠檬汁总黄酮的提取纯化工艺研究

利用超声波辅助提取柠檬汁中总黄酮,分光光度法测定总黄酮类化合物含量,利用单因素实验,找出了最佳提取工艺条件70%乙醇、料液比1∶1.5、超声温度55℃、超声时间60 min。通过对比实验找出了最佳纯化方法二氯甲烷在1∶1.5比例下萃取、大孔树脂吸附18 h、70%乙醇洗脱,洗脱液除醇后所得的黄酮浓度最高达1.851 mg/m L。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).