树状大分子接枝型聚合物色谱分离材料研究进展

随着色谱固定相制备技术和材料科学领域的不断发展,目前已经有大量修饰方法和新型材料被用于固相萃取、高效液相色谱以及离子色谱聚合物固定相填料的功能化修饰。其中聚酰胺-胺(PAMAM)树状大分子由于其独特的结构和性质,在色谱分离材料结构完善和性能提升中也发挥了重要的作用。该文主要综述了PAMAM树状大分子在以聚合物为基质的色谱分离材料修饰中的应用,并对其今后的发展进行了展望。     

手性树状分子膦配体在不对称催化氢化中的应用

树状大分子作为一类组成精确的超支化结构大分子,近十多年来引起了科学家们的广泛关注.作为一类新型可溶性载体应用于均相催化剂,尤其是手性均相催化剂的负载化研究是树状大分子的重要应用领域之一.本文主要介绍了手性树状大分子膦配体,包括膦配体位于树状分子核心、末端和表面的几种类型,重点对它们与金属配合物形成的催化剂在不对称催化氢化反应中的应用研究进行总结,同时对负载催化剂的分离与回收、树状分子载体的结构和体积对催化剂性能的影响进行了讨论.     

超支化修饰亲水型阴离子色谱柱的制备与应用

超支化树状修饰方法凭借灵活、可控的结构设计,在聚合物基固定相的疏水改性中发挥着重要作用。该文以聚苯乙烯-二乙烯基苯为基质微球,1,4-丁二醇二缩水甘油醚、四乙烯五胺为环氧-胺接枝原料,以甲胺封端,制备了亲水型离子色谱固定相。利用扫描电子显微镜(SEM)、比表面积分析仪(BET)、傅里叶红外光谱仪(FTIR)、X射线光电子能谱仪(XPS)分析固定相的形貌、结构和表面元素。随后将固定相填充成色谱柱,以无机阴离子、有机弱酸为分离目标评价色谱柱的分离性能和保留机制,计算目标离子的分离度和理论塔板数。通过改变淋洗液浓度、温度和种类,考察自制色谱柱的保留行为和分离性能。结果表明,采用环氧-胺树状支化的修饰方式引入羟基,可有效增加固定相的亲水性。二价离子(SO₄^2-、HPO₄^2-)受影响较大,表现出弱保留行为,而低价离子为离子交换保留行为。在3.6 mmol/L Na₂CO₃淋洗液条件下,制备的色谱柱可在20 min内完成12种阴离子(F^-、CH<...     

硅胶基质高效液相色谱填料研究进展

高效液相色谱(HPLC)不仅是一种有效的分析分离手段,也是一种重要的高效制备分离技术。色谱柱是HPLC系统的核心,不同性能的填料是HPLC广泛应用的基础。硅胶是开发最早、研究最为深入、应用最为广泛的HPLC固定相基质,其制备方法主要有喷雾干燥法、溶胶-凝胶法、聚合诱导胶体凝聚法及模板法等。近年来,亚2μm小粒径硅胶、核-壳型硅胶、双孔径硅胶、介孔性硅胶、有机杂化硅胶等新型硅胶应用于HPLC并取得了色谱分离技术的飞速发展,例如基于亚2μm填料的超高压液相色谱技术、基于核-壳型填料的快速分离技术、基于杂化硅胶填料的高温液相色谱技术等。硅胶经表面化学键合、聚合物包覆等有机改性可制得先进的大分子限进填料、温敏性填料、手性填料等,大大扩展了HPLC的应用范围。本文对液相色谱用硅胶的制备方法、改性与修饰方法以及硅胶基质固定相的评价方法加以系统综述,概述了新型硅胶在HPLC中的应用进展,并对硅胶基质填料的发展方向与应用前景进行了展望。     

基于树状大分子的SPECT成像造影剂的构建及其应用

树状大分子具有精准的化学结构,包括小分子内核、多分枝形成的内部空腔以及表面大量的官能团,可用于负载多种纳米颗粒及进行功能化修饰。此外,基于树状大分子的优异性能,具有良好的生物相容性及稳定性,经过功能化修饰后,其可在体内实现较长时间的血液循环和较高的组织特异性。因此,近年来常将树状大分子作为构建SPECT成像造影剂的理想载体使用。通过不同功能基团修饰树状大分子,降低纳米载体的细胞毒性,提高肿瘤部位的富集等,以实现精准高效的SPECT成像。SPECT成像主要通过监测放射性核素的体内分布、流动及代谢情况以在分子层面上监测病灶部位的生理、病理学变化。相比于小分子的放射性核素,以树状大分子为载体构建的SPECT成像造影剂体内循环时间更长,且经过功能化修饰后可实现体内特异性分布。本文围绕各类放射性核素标记的功能化树状大分子进行了详细阐述,并总结归纳其制备方法及生物医学应用。最后,对这类基于树状大分子的SPECT成像造影剂在肿瘤早期诊断中的应用前景进行了展望。     

核壳型二氧化硅色谱填料的研究进展

复杂样品的高效快速分离分析是分离科学家所面临的挑战。近年来,核壳型二氧化硅色谱填料以其高效、快速和低背压的特点被广泛用于小分子、大分子和复杂样品的快速分离分析。该文系统综述了二氧化硅核壳色谱固定相快速分离的机理,制备方法及其在小分子、多肽和生物大分子快速分离分析方面的应用,同时对核壳型色谱固定相的发展进行了展望。     

金纳米粒子修饰毛细管整体柱的制备及在多种色谱分离模式中的应用

整体柱是由单体、交联剂和致孔剂等通过自由基引发聚合反应,形成具有贯通孔及微孔结构的连续床固定相.整体柱具有良好的通透性和稳定性,并可于微管道内在线合成,特别适用于微型色谱柱或毛细管柱的制备.巯基化合物在金表面能进行自组装和交换的性质被广泛用于各种载体的修饰.其中,经烃基硫醇修饰的微米级的金颗粒已被用于色谱柱填料.本文将金纳米粒子表面积大、表面易修饰的特点与整体柱基质的优良性能相结合,发展了表面固定相基团可替换的毛细管色谱柱,用于多种色谱模式的蛋白或多肽混合物分离.     

肽类树状大分子的合成及其在药物传输系统中的应用

树状大分子是近年来蓬勃发展的一类新型高分子材料, 其表面存在大量的官能团, 分子内部存在空腔且分子尺寸可控, 因此, 树状大分子已被广泛应用于众多的领域. 肽类树状大分子是指在树状大分子结构中含有肽键的一类大分子, 因其具有类似蛋白质一样的球状结构, 且具有优异的水溶性、生物相容性、生物降解性和细胞低毒性等特点, 所以, 肽类树状大分子可以作为药物传输的载体. 此外, 肽类树状大分子的疏水空腔可以装载疏水性药物, 对其起到增溶和缓释作用. 综述了肽类树状大分子的合成方法, 并对其与药物分子的结合机制及其在药物传输系统中的应用进行了总结与展望.     

硅烷法表面接枝氧化铝对环氧复合材料和特高压盆式绝缘子性能的影响

为了研究微米级填料表面纳米化修饰对环氧复合材料和特高压盆式绝缘子性能的影响,采用硅烷法表面接枝技术,制备出不同粒径增加值的表面纳米化修饰的微-纳复合氧化铝填料。通过掺混不同比例的微-纳复合氧化铝填料,制备了环氧复合材料和特高压盆式绝缘子,测定其机械性能、电气性能和热性能,并与未掺混的环氧复合材料和特高压盆式绝缘子进行对比。结果表明:掺杂硅烷法表面接枝的氧化铝填料后,环氧复合材料和盆式绝缘子的热性能和电气性能基本不变,但机械性能提升明显。添加表面接枝氧化铝填料的环氧复合材料拉伸强度随粒径增加值增大而减小,随掺混比例先增大后减小,掺混比例为15%时,拉伸强度最大,达到90.88MPa,提升了16.5%,特高压盆式绝缘子压力试验破坏值提升了15%。氧化铝表面接枝对于提高环氧复合材料机械性能,提升特高压盆式绝缘子可靠性具有实际意义。     

溴化1-乙烯基-3-十二烷基咪唑硅胶键合固定相制备及其色谱性能

膜脂作为细胞质膜的主要组成部分,在生命活动中扮演着重要的作用,其涉及多种重要疾病的发生和发展过程。发展适用于膜脂分离分析的新型色谱材料对于其后续结构和生物学功能研究具有重要的意义。该文选用具有潜在生物相容性的离子液体溴化1-乙烯基-3-十二烷基咪唑（1-vinyl-3-dodecylimidazole bromide,VDI）为功能单体,通过一步法点击反应将其接枝到巯基功能化硅球表面,制备得到了新型溴化1-乙烯基-3-十二烷基咪唑硅胶键合固定相（Sil-VDI）。利用傅里叶变换红外光谱仪和热重分析仪对Sil-VDI固定相材料的结构进行表征,结果证明Sil-VDI色谱固定相已被成功制备。保留机制研究显示填充Sil-VDI色谱柱具有典型的反相/离子交换混合模式保留特性。基于此,采用不同疏水性物质烷基苯、多环芳烃、苯胺、苯衍生物和无机阴离子BrO₃ ^- 、NO₃ ^- 和IO₃ ^- 为测试物,对所制备固定相的色谱性能进行了研究。结果表明,该固定相对4类疏水性物质和无机阴离子均有较好的分离选择性和良好的峰对称性。进一步研究了所制备的Sil-VDI色谱柱对鸡蛋黄磷脂和肺腺癌细胞提取膜脂的分离效果,结果显示Sil-VDI色谱柱对2种磷脂样品均显示出了良好的分离能力。该文所制备的Sil-VDI色谱固定相合成方法简便,具有良好的分离分析应用潜能,后续工作会进一步研究该固定相在生物样品中的分离分析性能。     

基于微机电系统的微型气相色谱柱研究进展

气相色谱柱是气相色谱仪的关键部件,主要用于混合气体组分的分离。与传统气相色谱柱相比,基于微机电系统（MEMS）技术设计制作的微型气相色谱柱具有重量轻、体积小、功耗低、分离快速等优点,便于集成到便携式气相色谱仪中,适应了目前气相色谱仪微型化的发展趋势。该文综述了MEMS微型气相色谱柱的研究进展,首先阐述了MEMS微型气相色谱柱理论基础,随后对MEMS微型气相色谱柱沟道布局及柱内结构、固定相支撑层及固定相制备等方面进行了综述,最后对其发展趋势进行了展望。     

Preparation and evaluation of diblock copolymer‐grafted silica by sequential surface initiated‐atom transfer radical polymerization for reverse‐phase/ion‐exchange mixed‐mode chromatography

A novel approach that involved the grafting of diblock copolymer with two types of monomer onto substrate by sequential surface initiated‐atom transfer radical polymerization was proposed to prepare a mixed‐mode chromatographic stationary phase. The distinguishing feature of this method is that it can be applied in the preparation of various mixed‐mode stationary phases. In this study, a new reverse‐phase/ion‐exchange stationary phase was prepared by grafting hydrophobic styrene and cationic sodium 4‐styrenesulfonate by the proposed approach onto silica surface. The chromatographic properties of the prepared stationary phase were evaluated by the separation of benzene derivatives, anilines, and β‐agonists, and by the effect of pH values and acetonitrile content on the retention. Compared with typical RP columns, the prepared stationary phase achieved the better resolution and higher selectivity at a shorter separation time and lower organic content. Moreover, the application of the prepared column was proved by separating widely distributed polar and charged compounds simultaneously.     

Influence of surface modification on protein retention in ion-exchange chromatography: Evaluation using different retention models

A large number of different stationary phases for ion-exchange chromatography (IEC) from different manufacturers are available, which vary significantly in a number of chemical and physical properties. As a consequence, binding mechanisms may be different as well. In the work reported here, the retention data of model proteins (α-lactalbumin, β-lactoglobulin A, bovine serum albumin and alcohol dehydrogenase) were determined for three anion-exchange adsorbents based on synthetic copolymer beads with differences in the functional group chemistry. Fractogel EMD DEAE and Fractoprep DEAE consist of functional groups bound to the surface via “tentacles”, ToyopearlDEAE by a short linker. Three models which describe chromatographic retention were used to analyse the characteristic parameters of the protein/stationary-phase interactions. The number of electrostatic interaction between the stationary phase and the model proteins, the protein specific surface charge densities and the interacting surface of the proteins with the adsorptive layer of the chromatographic media depend on the surface modification as well as on the molecular mass of the model proteins. In general, protein retention of the model proteins on the weak anion exchangers was found to be greater if the stationary phase carries tentacles and protein mass is above 60 kDa.     

Pressurized CEC of neutral and charged solutes using silica monolithic stationary phases functionalized with 3-(2-aminoethylamino)propyl ligands

A novel silica monolithic stationary phase functionalized with 3-(2-aminoethylamino)propyl ligands for pressurized CEC has been presented. The monolithic capillary columns were prepared by a sol-gel process in 75 microm id fused-silica capillaries and followed by a chemical modification. The diamino groups on the surface of the stationary phase are meant to generate the chromatographic surface and a substantial anodic EOF as well as to provide electrostatic interaction sites for charged solutes. The electrochromatographic characterization and column performance were evaluated by a variety of neutral and charged solutes. It was observed that the anodic EOF for the diamine-bonded monolith was greatly affected by the reaction time with 3-(2-aminoethylamino)propyltrimethoxysilane and the PEG amount in the sol-gel reaction mixture in addition to the mobile phase conditions. The monolithic stationary phase exhibited hydrophilic interaction chromatographic behavior toward neutral solutes. Good separations of various solutes including phenols, nucleic acid bases, nucleosides and nucleotides were achieved under different experimental conditions. Fast and efficient separations were obtained with high plate counts reaching more than 130,000 plates/m.     

Synthesis and characterization of β-cyclodextrin modified hyperbranched carbosilane as stationary phase for GC

A new β-cyclodextrin modified hyperbranched carbosilane stationary phase for gas chromatography was synthesized by substituting the -OH groups ofβ-cyclodextrin with hyperbranched carbosilane and was coated on the inner wall of fused silica capillary column for gas chromatography.The chromatographic behaviors of the stationary phase were studied.The initial testing results showed mat it possessed good separation abilities for several kinds of mixtures,such as benzenes,acrylates,ketones and alkylchlorides.     

智能型色谱整体固定相的研究进展

整体柱作为新一代色谱固定相,具有原位制备、快速传质和高通透性的特点,近年来引起人们的极大关注。智能型聚合物作为一类功能性材料,能在温度、pH和盐等环境因素的刺激下产生特异性响应变化,通常被修饰到固相载体表面用来构造环境敏感性材料,使得该智能材料在药物控释、化学传感和细胞生长等领域有着广泛的应用。因此,在整体柱上构造智能型表面更为其在色谱领域的发展提供了新的契机。本文主要综述了近年来智能型整体柱在色谱领域的研究进展。     

Monolithic stationary phases for liquid chromatography and capillary electrochromatography

A monolithic stationary phase is the continuous unitary porous structure prepared by in situ polymerization or consolidation inside the column tubing and, if necessary, the surface is functionalized to convert it into a sorbent with the desired chromatographic binding properties [J. Chromatogr. A 855 (1999) 273]. Monolithic stationary phases have attracted considerable attention in liquid chromatography and capillary electrochromatography in recent years due to their simple preparation procedure, unique properties and excellent performance, especially for separation of biopolymers. This review summarizes the preparation, characterization and applications of the monolithic stationary phases. In addition, the disadvantages and limitations of the monolithic stationary phases are also briefly discussed.