阳离子交换树脂/H_2O_2体系催化氧化环己烯的研究

在以改性阳离子交换树脂为催化剂、H2O2为氧化剂的催化氧化体系中,主要研究和考察了环己烯直接氧化制备1,2-环己二醇的反应,并优化得到了最佳合成工艺,在无溶剂,H2O2与环己烯的摩尔比为1.0:1.0、反应温度为70℃、反应时间为6.5h、催化剂用量为环己烯摩尔量10%的反应条件下,环己烯的转化率大于99.0%,产品1,2-环己二醇的选择性大于98.0%。阳离子交换树脂催化剂重复使用12次未见其活性和选择性明显下降。在此反应条件下,直链状的1-己烯也可高效和高选择性地转化为1,2-己二醇。     

纳米SnO2高效催化烯烃与H2O2环氧化反应研究

构建了用于催化烯烃与过氧化氢环氧化反应的高效、 绿色催化反应体系. 首先, 通过水热合成法制备了纳米SnO₂, 并在320 ℃下煅烧. 随后, 对所有催化剂进行X射线衍射(XRD)、 紫外-可见漫反射光谱(UV-Vis)、 傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)表征. 进一步将催化剂用于以H₂O₂水溶液为氧化剂环氧化各种官能化烯烃(包括环烯烃, 苯乙烯和直链烯烃)的反应, 以高转化率和高选择性得到了环氧化物. 在相似的反应条件下, 发现合成的纳米SnO₂-170催化剂在催化1-甲基环己烯与H₂O₂的环氧化反应中的活性最佳, 在2 h内1-甲基环己烯的转化率达到100%, 环氧化物选择性达到100%.     

过渡金属卟啉催化分子氧氧化环己烯性能研究

研究了meso-四(对羟基苯基)卟啉过渡金属配合物(THPPM,M=CoⅡ,MnⅡ)催化分子氧氧化环己烯的反应。结果表明,在反应温度为70℃时,THPPCoⅡ催化分子氧氧化环己烯的转化率达到90%,产物主要是2-环己烯-1-酮(70%)和2-环己烯-1-醇(26%),并考察了反应温度、时间及加入吡啶对环己烯转化率和产物选择性的影响,探讨了THPPCoⅡ催化分子氧氧化反应机理。     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能（英文）

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响.以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

Co~(2+)/Cu~(2+)掺杂型铋杂多酸的制备及催化烯烃的研究

以多功能无毒且环境友好的铋(Bi~Ⅲ)为杂原子制备了Na_(12)[Bi_2W_(22)O_(74)(OH_)2]·42H_2O(Bi-POM)、Na_(10)[Bi_2W_(20)Co_2O_(70)(H_2O)_6]·39H_2O(Bi-Co-POM)以及Na_8[Bi_2W_(20)Cu_2O_(68)(OH)_2(H_2O)_6]·25H_2O(Bi-Cu-POM)含铋杂多酸催化剂,并用于以分子氧为氧化剂催化环己烯转化为环己烯酮的羰基化反应。这些复合物通过FT-IR、UV、TG/DSC以及XRD等分析方法对其结构进行了表征。结果表明Bi-POM催化剂对环己烯烯丙位羰基化反应具有较高的催化活性,掺杂Co~(2+)或Cu~(2+)金属离子后催化活性进一步提升。Bi-Co-POM催化剂展示了最优的催化性能,在最佳反应条件下(O_2氛围,60℃,8 h),催化氧化环己烯(作为模板)转化率高达85.9%,2-环己烯-1-酮的选择性高达91.6%。并探究了Bi-Co-POM催化剂在最优条件下对不同反应底物的普遍适用性,提出了可能的催化氧化机理。     

离子液体中V2O5催化环己烯选择氧化合成 2-环己烯酮

研究了以V2O5为催化剂,H2O2为氧化剂,在室温离子液体中环己烯氧化制备2-环己烯酮的反应.考察了离子液体种类、反应温度、催化剂用量和氧化剂用量等因素对2-环己烯酮产率的影响.结果表明,在H2O2用量为110 mmol,V2O5/环己烯摩尔比为2%,反应温度为313 K的条件下,在[bmim]BF4离子液体中反应10 h后,环己烯的转化率和2-环己烯酮选择性分别为88.7%和91.1%.对含离子液体的催化体系的重复使用性能进行了考察.结果发现,随着使用次数的增加,环己烯的转化率以及2-环己烯酮的选择性有所下降.     

离子液体中Mn(salen)催化环己烯环氧化反应

 研究了离子液体中Mn(salen)络合物催化环己烯的环氧化反应,考察了反应介质、 Mn(salen)络合物催化剂结构和反应条件等对环氧化反应的影响. 在离子液体-CH2Cl2混合溶剂中,以相对廉价的H2O2为氧化剂,得到了高的环己烯转化率和环氧环己烷选择性. 当以邻苯二胺和水杨醛制备的Mn(salen)络合物为催化剂,反应温度为273 K时,在［bmim］BF4-CH2Cl2的混合溶剂中,环己烯的转化率和环氧环己烷选择性分别可达100%和94.0%. 此外,反应结束后,产物可以由正己烷萃取出来,解决了传统均相催化体系中催化剂与产物不易分离的问题.     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

双二茂铁基醛亚胺钼（ＶＩ）配合物的合成及催化性能

通过二茂铁甲醛与丙二胺反应得到双二茂铁基醛亚胺配体N~1,N~3-双二茂铁亚甲基丙烷-1, 3-二胺(FcMP), FcMP与MoO_2Cl_2(THF)_2的四氢呋喃溶液作用, 合成了双二茂铁基醛亚胺钼(VI)配合物. 以配合物为催化剂, 叔丁基过氧化氢为氧化剂, 分别以苯乙烯和环己烯为底物, 考察了温度、时间、催化剂量及溶剂对于烯烃均相环氧化反应的催化性能的影响. 结果表明, 在最优实验条件下, 反应12 h, 环己烯的转化率为88%, 环氧环己烷的选择性为98%;苯乙烯的转化率为84%, 氧化苯乙烯的选择性为76%. 催化剂经简单分离可回收使用, 且催化活性基本保持不变. 同时对环氧化反应的机理进行了初步探讨.     

氨基酸辅助合成高活性六配位钛物种的TS-1分子筛

TS-1分子筛是以TO4(T=Si,Ti)四面体为基本单元,通过氧桥连接而形成的具有MFI拓扑结构的微孔晶体材料,其在催化烯烃环氧化、酮类氨肟化、氧化脱硫及芳香烃羟基化等氧化反应中表现出较好的催化活性.目前,提高TS-1分子筛催化性能的方法主要包括:(1)制备纳米和多级孔TS-1分子筛,以提高其扩散传质性能;(2)提高TS-1分子筛的钛含量并抑制锐钛矿相的产生,以增加其催化活性位点.最新研究表明,相比于传统四配位钛物种(TiO4)作为催化活性中心,六配位(TiO6)钛物种在烯烃环氧化反应中具有更高的催化活性,可进一步降低反应活化能,最终实现高效催化转化.然而,TiO6物种结构中的Ti-OH组分,易导致开环反应发生,从而降低环氧化产物的选择性.因此,构筑高活性TiO6物种及调变TiO4/TiO6比例,对提高烯烃转化率及环氧产物选择性具有重要意义.当前,高活性钛物种的结构表征及其构筑已成为研究热点且仍面临挑战.本文协同采用氨基酸辅助合成策略和两步晶化方法,成功地制备出具有TiO4和TiO6物种且无锐钛矿相的多级孔TS-1分子筛.在该协同策略中,两步晶化过程有利于抑制锐钛矿相的形成,而氨基酸的引入对高活性TiO6物种的构筑具有重要作用.氨基酸分子可与钛原料形成螯合物,为TS-1分子筛晶化提供"养料",并有效平衡晶体成核与生长速率及稳定TiO6物种,最终实现制备富含TiO6物种的多级孔TS-1分子筛.相比于传统TiO4物种作为催化活性中心(1-己烯的转化率<25％,环氧化产物选择性>95％),本文所制备的TS-1分子筛(Si/Ti=36.9)因其兼具TiO4和TiO6物种,在1-己烯环氧化反应中表现出更好的催化性能(1-己烯的转化率33％,环氧化产物选择性95％).这是由于TiO4物种不会导致开环反应的发生,因此可以保证较高的环氧产物选择性,而TiO6物种经H2O2活化后,可形成具有更高活性及更小位阻效应的催化中心,极大提高了1-己烯转化率.综上,本文合成策略为构筑具有高活性钛物种及多级孔结构的钛硅分子筛提供了指导作用,为调控硅铝酸盐及硅取代磷酸铝分子筛材料活性位点的含量和分布提供了新思路.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.