用聚丙烯酰胺微波高压合成金纳米粒子

金纳米粒子;光谱性质;用聚丙烯酰胺微波高压合成金纳米粒子     

各向异性金纳米粒子的制备及其在催化中的应用

尽管有关金纳米粒子催化的研究工作很多,但其中大多数都是采用传统的浸渍法将金盐负载到载体上、共沉淀或沉积-沉淀法制得负载的纳米粒子,但这些方法并未吸收最新的纳米技术。最近,金催化剂的研究者开发了在胶态悬浮液中制取金属纳米粒子,然后进行固载,从而使得单金属和双金属催化剂的催化活性和形貌控制取得较大进展。另一方面,最近十年出现了金纳米粒子合成的高级控制技术,得到了许多各向异性的金纳米粒子,且很容易制得新的形貌,可以控制纳米粒子的表面原子配位数和光学特性(可调的等离子体带),这些都与催化密切相关。这些形貌包括纳米棒、纳米星、纳米花、树枝状纳米结构或多面体纳米粒子等。除了高度关注各向异性金纳米粒子的最新开发的制备方法和性质,本综述也清楚地总结了这些纳米粒子独特的催化性能,以及通过提供更高催化性能的金催化剂、控制暴露的活性位,以及热、电和光催化的鲁棒性和可调性,从而给多相催化领域带来令人惊奇的潜在变革。     

基于金纳米粒子光学性质的比色传感器及其在食品安全检测中的应用

对金纳米粒子的合成方法的发展及其现状、金纳米粒子的光学性质及其功能化以及基于金纳米粒子光学性质的比色传感器的原理作了简要的回顾后,对其在食品安全检测领域在近十年间的应用概况作了综述,主要涉及重金属离子、DNA、致病菌、农药残留、抗生素等药物残留、有毒有害化学物质、真菌毒素等检测等七个方面,并对此领域的发展前景作了简要展望(引用文献59篇)。     

金纳米粒子与蛋白质的相互作用及其应用

金纳米粒子与蛋白质间存在多种作用方式,包括物理吸附、化学共价结合以及非共价特异性吸附等.金纳米粒子表面等离子体共振效应引起可见光区的特征吸收及表面增强拉曼散射,常用来研究金纳米粒子与蛋白质间的相互作用.金纳米粒子与蛋白质间的作用与纳米粒子的尺寸、表面化学及蛋白质的大小、电荷、氨基酸残基有关.利用金纳米粒子与蛋白质的相互作用及纳米金的谱学性质,可以对疾病或环境污染进行简单、高效、低成本检测,也可用于疾病治疗.     

当金遇到纳米——从大众的宠儿到科学家的掌上明珠

金因稀有、性质稳定，长期以来被用作首饰、货币和金融储备，也因此未能在化学领域得到有价值的应用。但将单质金分散为纳米尺度的粒子时，却因其表面效应、小尺寸效应等具备了多种特殊的物理、化学、生物特性。介绍了纳米金粒子的制备、性质，并重点从技术原理的角度综述了纳米金粒子在疾病筛查与诊断、DNA识别与检测、食品安全检测、高效及绿色催化方面的应用，包括免疫学、生物化学、催化化学等多个领域。     

基于多肽-金纳米粒子复合物的生物传感研究及应用进展

多肽是α-氨基酸以肽键连接在一起而形成的化合物,同时也是蛋白质水解的中间产物。 金纳米粒子具有良好的生物相容性和突出的表面等离子共振性质,基于多肽-金纳米粒子体系的独特光学特性的生物传感研究及应用已引起众多科学工作者的关注。 本文仅就近年来利用多肽-金纳米粒子复合物进行生物传感研究及应用加以评述,包括多肽和金纳米粒子的制备与特性、多肽-金纳米粒子复合物的组装以及其在生物传感中的应用等。     

乳液聚合法制备纳米金/聚苯乙烯复合粒子

以氯金酸为前驱体,十二烷基硫醇和硼氢化钠分别作为稳定剂和还原剂,采用相转移法制备了单分散的金纳米粒子.将金纳米粒子通过乳液聚合的方法制备了纳米金/聚苯乙烯复合粒子.通过紫外-可见吸收光谱(UV-Vis)研究了纳米金和纳米金/聚苯乙烯复合粒子的光吸收特性,使用傅立叶变换红外光谱(FT-IR)、X射线衍射(XRD)、透射电子显微镜(TEM)和动态光散射(DLS)对产物的组成、晶体结构、形貌、以及粒径进行了表征.结果表明,复合粒子为粒径分布较窄的球形,其中的金纳米粒子为面心立方结构.热失重分析(TGA)说明制备的纳米金/聚苯乙烯复合粒子具有很好的热稳定性.     

藤茶干粉提取液还原制备金纳米粒子

用藤茶干粉提取液生物还原氯金酸溶液实现了金纳米粒子绿色制备,通过紫外-可见分光光度计、透射电子显微镜和粒度分布等技术手段对金纳米粒子形态等物性进行了表征,运用控制变量法探究了金纳米粒子生物合成的规律。研究发现,金纳米粒子的粒径、粒径分布、形状和稳定性受反应体系pH值、温度以及氯金酸的用量影响。pH6.47或藤茶干粉提取液过量时会引起纳米金的团聚;温度升高,金纳米粒子平均粒径会减小。通过变量控制,可以实现金纳米粒子绿色合成的有效控制。     

从零维到三维的金范式: 金单质概念的新发展

含有零维金纳米球的胶体金,在古埃及就已经被用于制造彩色玻璃,但直到20世纪,人们才对其进行系统的研究。20世纪下半叶,一维金纳米棒的合成及其奇异的光学性质引起了科学家对金纳米颗粒的关注。随后,二维金纳米片、三维金纳米哑铃等金纳米颗粒的相继出现,丰富和发展了金单质的概念。几种新的金单质的发现,构建了从零维到三维的金范式,从而启发人们对“金单质”及其应用进行更加深入的探究。     

电解法制备棒状金纳米粒子溶胶

纳米材料的光学、磁学和电学性质依赖于粒子的尺寸和形状 .因此 ,合成过程中实现纳米粒子形貌的控制非常重要 [1,2].金溶胶在紫外-可见-近红外区的光吸收行为主要取决于金纳米粒子内部电子集体运动的等离子共振 ,其频率由粒子的尺寸所决定 .由于棒状金纳米粒子有横截直径与长度两个特征尺寸 .与大小同其横截直径相当的球形粒子相比 ,棒状粒子除了在 520 nm附近的吸收之外 (横截峰 ,SPt),还在长波方向有一个吸收峰 (长轴峰 ,SPl),其位置随"长径比"的增加而显著红移 [3,4].为了深入研究棒状金纳米粒子由尺寸和形状决定的各种特性及其应用 ,W…     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

Facile Synthesis of Multi-Branched Gold Nanostructures through a TBAB-Assisted Route in Aqueous Solution and Their SERS Property

Facile synthesis of multi‐branched gold nanostructures by using the tetrabutyl ammonium bromide (TBAB) as a capping agent is described. The reaction is carried out in a one‐step process at mild temperature. Gold nanostructures with more than six sharp branches ranging from 70 to 130 nm in length are synthesized in high yield. It is proposed that the relative weak adsorption capacity of TBAB leads to the incompletely covered gold surface and the growth of nanoparticles occurs on the uncovered gold surface, and therefore short branches appear consequently. Then positively charged TBAB layers on the gold surfaces prevent the branches from aggregating with each other which stimulates the branch growth. The prepared branched gold nanoparticles show efficient surface‐enhanced Raman scattering (SERS) properties. Low temperature (4°C) is unfavorable to the formation of multi‐branched gold nanostructures, and only thin small irregular plate‐like nanoparticles are produced. The addition of SDS in TBAB aqueous solution results in forming SDS micelles at much lower concentration of SDS (0.4 mmol/L) as compared to that in pure water, and short branched gold nanoparticles are obtained in the SDS‐TBAB system.     

金纳米颗粒制备及应用研究进展

金纳米颗粒是近年研究的一种热门材料。介绍了金纳米颗粒主要的制备方法,包括化学还原法,两相法,晶种生长法以及模板法,并总结了金纳米粒子在生物医学、传感器、催化剂、电化学等领域的应用进展。     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.     

Carbon Nanotube and Gold‐Based Materials: A Symbiosis

Carbon nanotubes constitute a novel class of nanomaterials with potential applications in many areas. The attachment of metal nanoparticles to carbon nanotubes is new way to obtain novel hybrid materials with interesting properties for various applications such as catalysts and gas sensors as well as electronic and magnetic devices. Their unique properties such as excellent electronic properties, a good chemical stability, and a large surface area make carbon nanotubes very useful as a support for gold nanoparticles in many potential applications, ranging from advanced catalytic systems through very sensitive electrochemical sensors and biosensors to highly efficient fuel cells. Here we give an overview on the recent progress in this area by exploring the various synthesis approaches and types of assemblies, in which nanotubes can be decorated with gold nanoparticles and explore the diverse applications of the resulting composites.     

DNA‐Encoded Tuning of Geometric and Plasmonic Properties of Nanoparticles Growing from Gold Nanorod Seeds

Systematically controlling the morphology of nanoparticles, especially those growing from gold nanorod (AuNR) seeds, are underexplored; however, the AuNR and its related morphologies have shown promises in many applications. Herein we report the use of programmable DNA sequences to control AuNR overgrowth, resulting in gold nanoparticles varying from nanodumbbell to nanooctahedron, as well as shapes in between, with high yield and reproducibility. Kinetic studies revealed two representative pathways for the shape control evolving into distinct nanostructures. Furthermore, the geometric and plasmonic properties of the gold nanoparticles could be precisely controlled by adjusting the base compositions of DNA sequences or by introducing phosphorothioate modifications in the DNA. As a result, the surface plasmon resonance (SPR) peaks of the nanoparticles can be fine‐tuned in a wide range, from visible to second near‐infrared (NIR‐II) region beyond 1000 nm.     

纳米金淀积的多孔硅靶增强样品的激光解吸/电离质谱信号

硅片类型和多孔硅结构的多样性影响了多孔硅表面的激光解吸/离子化质谱(DIOS)(无辅助基质的激光解吸/电离飞行时间质谱(LDI-TOF-MS))数据的重复性和靶的耐储时间。本工作通过在多孔硅的表面淀积金纳米颗粒并将其作为目标靶来增强软物质分子如聚乙二醇和多肽的激光解吸/电离质谱信号。纳米金的淀积钝化了多孔硅表面的Si-H活性基团,增加了靶的耐储时间。用场发射扫描电镜表征了多孔硅淀积金纳米颗粒前后的形貌,用X射线能量色散光谱法分析金的百分含量,结果表明其含量随沉积时间的延长而增加。激光解吸/电离质谱信号的增强可能是由多孔硅及其支持的金纳米颗粒的光学和物理性质引起的,该类型的样品靶在激光解吸/电离飞行时间质谱的应用上结合了多孔硅和金纳米颗粒的双重优势。     

单分子层保护纳米 Au 粒子表面配位催化剂的制备及其应用

 贵金属纳米粒子由于其小尺寸效应而表现出特殊的催化性能. 综述了纳米 Au 粒子表面配位催化剂的制备方法及其在催化中的应用. 由于 Au 可与硫化物形成配位键, 所以硫化物可在 Au 表面形成有序单分子膜. 单分子膜保护的 Au 纳米粒子具有非常好的溶解性、分散性、稳定性, 以及由不同的表面功能团而导致的不同的催化性能. 该催化体系兼具均相催化剂和多相催化剂的特点, 这对开发新型催化剂具有重要的理论和实际意义.