Assessment of Noise Exposure of Sawmill Workers in Southwest,Nigeria

Economic wood processing employs the use of industrial machines for cutting, shaping, milling, and sawing timber, thereby leading to the generation of high levels of noise. Published data from empirical studies have categorized noise as an environmental hazard of global significance. Furthermore, noise exposure limits for different industries and all the industrial machines available has not been formally established as it presently exists in developed nations around the world. Therefore, this study assessed the daily exposure of sawmills workers to noise in Southwestern Nigeria. Reconnaissance surveys were first carried out in Osun, Oyo, Ondo, Ekiti, Lagos, and Ogun States to select sawmills that were fully operational and fit for the study. Two fully functional sawmills in two cities of each State were eventually selected for data collection, making a total of 24 sawmills, while the Circular Machines (CM), Planer Machines (PM), and Band-saw Machines (BM) were the machines in each sawmill considered. Two machines each of CM, PM, and BM were considered in each sawmill, making a total of forty-eight (48) machines each of CM, PM, and BM. Sound data were collected between 7 am and 7 pm each day for six days (between Monday and Saturday) using Extech 407732 sound level meter and all stabilized measurements were taken three times at different intervals. The data collected were in three different periods: Machine No-work Period (NP_m), Machine Idle Period (IP_m), and Machine Working Period (WP_m). A two–way Analysis of Variance (ANOVA) was carried out at P < 0.05 to determine whether there is a significant difference in the sound level average before and after the break, for both the idle and working periods of the three machines considered. This was also done to determine whether there is a significant difference between the sound level average of the results collected during idle and working periods of the three machines. Noise Pollution Levels (L_np) ranged from 83.20 dB (PM) to 107.65 (BM) and 93.42 (CM and PM) – 116.00 (BM) respectively, while IP_m also gave the least noise pollution level of 95.79 dB and WP_m gave the highest level of 102.88 dB. The results revealed that all the machines’ L_np values in the working period are more than the 90 dB acceptable limit the recommendation value of 90 dB while 89.6% of CMs, 75% of PMs, and 89.6% of BM had their L_np above 90 dB in the idle period respectively. The minimum and the maximum noise dose levels for IP_m, WP_m and overall are 0.09 (BM) and 2.37 (CM), 0.50 (CM), and 4.77 (PM) and 0.69 (BM) and 6.64 (PM) respectively. The study found out that the fundamental contributing factors to the high noise levels in sawmills are poor machine maintenance, use of old and obsolete machines, poor housekeeping strategy, limited space, workers’ negligence, lack of PPE, and lack of occupational safety training. The study recommends that proper workplace practices such as use of personal protective equipment, new and modern machines, training, and occupational safety programmes be implemented in the considered sawmills.     

Synthesis,molecular modeling,TD-DFT,antimicrobial, and in vitro therapeutic activity of new spherical nano-sized sulfonamide imine ligands and their zinc (II) and copper (II) complexes

A series of nanometer-sized spherical sulfonamide imine ligands HL ¹ -HL ⁵ and their copper and zinc complexes were synthesized and fully characterized based on elemental analyses, spectroscopic (UV/vis, FT-IR, NMR, EPR, SEM) studies, molar conductance and thermal analyses. Furthermore, computational studies of HL ¹ -HL ⁵ were carried out by the DFT/B3LYP method. TD-DFT, HOMO and LUMO energy values, chemical hardness, electronegativity, electrophilic index, softness, and other parameters were calculated. Screening against several pathogenic microorganisms indicated that HL ¹ exhibited high activity against the tested Gram-negative bacteria relative to other analogues and the inhibition activity is greater than the standard Gentamicin. Analogously, HL ² exhibited high potent activity against the tested Gram-positive bacteria. Copper complexes exhibited a higher potent activity than zinc analogues. Noteworthy, inhibition activity of [Cu ( L ³ )(OAc)] complex is higher than that of the standard Ampicillin. [Cu ( L ² )(OAc)] complex displayed a similar activity of the standard bactericides and fungicides in use. The complexes showed appreciated values of MIC against bacterial strains: B. subtilis (MIC = 0.4 μg / mL), E. coli and S. pneumonia (MIC = 1.95 μg / mL) and P. aeruginosa (MIC = 7.81 μg / mL). in vitro cytotoxic activities study proved that [Cu ( L ³ )(OAc)] complex exhibited appreciable activity versus (HEPG-2); IC₅₀ = 4.8 μg/ml, while [Cu( L ² )(OAc)] complex showed a high activity against (MCF-7); IC₅₀ = 6.2 μg/ml. These results could be considered as new findings of promising antitumor candidates for experimental chemotherapy.     

Effect of upstream velocity profile and integral flow straighteners on turbine flowmeters

One of the most important factors determining the shape of the calibration curve for a given turbine meter is the change in the upstream velocity distribution with flowrate. A theoretical model is evolved which can be used to predict the effects of velocity profile, viscosity and swirl on the calibration curve. It has also been used to explain the calibration curve of a commercial meter having a geometry very different from that for which the theory was developed. The effect of different types of integral flow straighteners on turbine meters is also investigated and found to depend on both the number of vanes and their length. A correlation is suggested for radial-vaned flow-straighteners     

Synthesis of Novel Semiconducting Aromatic Polyesteramids Containing Pyridine: Characterization of Nanometer-Sized Rod-Like Analogues and their Copper (II) Complexes

In this paper, new thermally stable isomeric unsubstituted polyesteramides have been successfully prepared by condensation of aromatic acids chlorides namely; isophthaloyl, pyridine-3,5-dicarbonyl and pyridine-2,6-pyridine-dicarbonyl dichlorides with the aminophenol isomers in NMP. Conducting the reaction in NMP/H₂O (90/10 v/v) followed by centrifugal separation furnished the desired polymers as rod-like nanoparticles. The morphology of obtained nanoparticles were studied by SEM. Mixing NMP with H₂O was essential for controlling the particles morphology and as a reaction accelerator.

Pyridine-containing polymers exhibit semi-conducting nature as their conductivities increase with increasing temperature, while no variation of the conductivity with the temperature was observed for their corresponding phenylene analogues. Introduction of the nitro group into the polymer backbone led to a red shift in the absorption and the obtained polymers have a bright yellow color, which is unusual with this polymer group. Copper (II) ions were complexed the polyesteramides-containing nitro group in a (1:1) ratio. Complexes of pyridine-containing polymers exhibit semiconducting nature changed to metallic characters on heating and their conductivities increased tens of magnitudes than their corresponding ligands. These new types of polymeric materials and their nano-sized rods may have numerous applications in nanotechnology and their properties can be tuned for specific applications such as conducting adhesives and coating materials.     

Application of Monte Carlo simulation method to polymerization kinetics over Ziegler–Natta catalysts

In the current work, the Monte Carlo simulation method was applied to ethylene polymerization over Ziegler–Natta catalysts. As expected, polymerization over each center of a Ziegler–Natta catalyst leads to a polymer having a Schultz–Flory molecular weight distribution. Notwithstanding, the total molecular weight distribution obtained by all catalyst centers together is at least twice as broad as that of each center. As another interesting finding, the introduction of hydrogen to the reaction deactivates the catalyst active centers and thereby reduces the catalyst activity. Nevertheless, it does not mainly affect the polymerization kinetics. In addition, the polymer molecular weight falls as hydrogen is added to the reaction since it acts as a strong transfer agent. The same effect is seen when cocatalyst concentration increases. Hydrogen also widens the polymer molecular weight distribution. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 45–56, 2009     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

Mechanistic studies of the triggered release of liposomal contents by matrix metalloproteinase-9

Matrix metalloproteinases (MMPs) constitute a class of extracellular-matrix-degrading enzymes overexpressed in many cancers and contribute to the metastatic ability of the cancer cells. We have recently demonstrated that liposomal contents can be released when triggered by the enzyme MMP-9. Herein, we report the results of our mechanistic studies of the MMP-9-triggered release of liposomal contents. We synthesized peptides containing the cleavage site for MMP-9 and conjugated them with fatty acids to prepare the corresponding lipopeptides. By employing circular dichroism (CD) spectroscopy, we demonstrated that the lipopeptides, when incorporated into liposomes, are demixed in the lipid bilayers and generate triple-helical structures. MMP-9 cleaves the triple-helical peptides, leading to the release of the liposomal contents. Other MMPs, which cannot hydrolyze triple-helical peptides, fail to release the contents from the liposomes. We also observed that the rate and extent of release of the liposomal contents depend on the mismatch between the acyl chains of the synthesized lipopeptide and phospholipid components of the liposomes. CD spectroscopic studies imply that the observed differences in the release reflect the ability of the liposomal membrane to anneal the defects following the enzymatic cleavage of the liposome-incorporated lipopeptides.