毛细管反相电色谱法分离行为的研究

对乙睛-水-磷酸二氢销体系毛细管反相电色谱分离行为进行了研究。采用柱上紫外检测,在75μmi.d.×30cm的毛细管ODS（3μm）填充柱上获得了小于2.0的折合培板高度。同时还研究了乙睛的比例、电解质的浓度和电场强度等因素对电渗流和往效的影响。     

毛细管离子色谱进展

从毛细管离子色谱柱制备和毛细管离子色谱仪器研制两方面评述了毛细管离子色谱目前的发展状况.毛细管离子色谱柱包括开管离子色谱柱,毛细管颗粒填充离子色谱柱以及最近几年发展起来的整体毛细管离子色谱柱.对毛细管离子色谱仪的总结包括微流量泵、小体积进样器、适合毛细管离子色谱系统的小体积抑制器、电导和光学检测器等.     

高效细内径毛细管电色谱填充柱的制备

发展了一套毛细管填充柱制备方法,在１００μｍ内径毛细管柱中填充３μｍＯＤＳ固定相,以毛细管电色谱法（ＣＥＣ）分离模式对芳香胺类样品进行分离,柱效高达２５．９万理论塔板数／米,折合塔板高度达１．３。类似研究在国内尚未见报道。     

毛细管气相色谱用固定液的进展

一、前言 自从1979年弹性石英毛细管柱问世之后.毛细管气相色谱得到了迅速的发展。以毛细管柱代替填充柱的趋势日益明显.特别是1983年大内径厚液膜毛细管柱的发展和应用使这种趋势更加肯定了。当然目前在国内填充柱气相色谱仍在例行分析中占主导地位,但是随着毛细管色谱技术在国内的进一步发展,填充柱会逐步地被毛细管柱所取代。     

金纳米粒子修饰毛细管硅胶整体柱的制备及其电色谱性能研究

通过毛细管硅胶整体柱表面修饰十八烷基硫醇金纳米粒子,制备了一种新型毛细管电色谱固定相.制备金纳米粒子修饰整体柱时,采用溶胶-凝胶法制备毛细管硅胶整体柱,并在其表面化学修饰3-巯基丙基三甲氧基硅烷;通过巯基基团固载金纳米粒子于整体柱上,再共价键合十八烷基硫醇于金纳米粒子表面.以甲苯为探针,对理论塔板高度与流动相线速度之间...     

使用含离子涂层柱的毛细管电泳和毛细管电色谱的研究进展

 毛细管电色谱是近年发展起来的高效、高选择性的微分离技术。与一般的毛细管电泳和使用ODS反相填料的毛细管电色谱相比 ,含离子涂层柱的毛细管电泳和毛细管电色谱能提供较大且可控的电渗流 ,便于拓宽分离对象 ,优化分离条件。对使用含离子涂层柱的毛细管电泳和电色谱的特点、发展和应用状况进行了综述。     

一种多通道匀浆装填毛细管色谱柱的新装置及应用

针对目前毛细管色谱柱装柱效率低、不同批次装填的毛细管色谱柱之间性能差异大的问题,我们发展了一种多通道匀浆装填毛细管色谱柱的新装置。该装置以液相色谱泵提供压力、采用磁力搅拌保持匀浆液均匀分散,一次可装填多达6根毛细管色谱柱。以牛血清白蛋白(BSA)的胰蛋白酶酶切肽段混合物为样本,选择峰容量、蛋白覆盖率、3个特定离子的保留时间以及毛细管色谱柱柱压为指标,在毛细管液相色谱-质谱联用系统上对装填的反相毛细管色谱柱的性能进行了评价。分别考察了一次装填的6根毛细管色谱柱、两次装填的12根毛细管色谱柱以及一次装填1根与一次装填6根毛细管色谱柱的性能及稳定性。实验结果表明:同一批次装填的6根毛细管色谱柱的性能相近;不同批次装填的12根毛细管色谱柱的峰容量和覆盖率没有明显的区别,但保留时间和毛细管色谱柱柱压的稳定性较差;一次装填1根和一次装填6根毛细管色谱柱柱性能的稳定性与两次分别装填6根毛细管色谱柱的稳定性相近,即采用本装置可显著提高毛细管色谱柱的装填效率且每次装填毛细管色谱柱的数量不会对柱性能产生影响。     

反相毛细管整体柱的制备及其在多肽混合物分离中的应用

采用甲基丙烯酸月桂酯为基础功能单体,乙二醇二甲基丙烯酸酯为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,在内径为75 μm的石英毛细管内制备了具有良好机械性能及化学稳定性的反相毛细管整体柱。考察了致孔剂的种类、比例以及交联剂在单体混合物中的比例对柱压和分离效果的影响;以单体15%、交联剂15%、致孔剂70%(均为质量分数)作为优化配方,在70 ℃条件下反应24 h;并对所合成的毛细管整体柱进行了电镜表征,测试了流速、柱长与柱压的关系。结果表明,毛细管整体柱的通透性良好,可通过延长柱长的方法提高分离效果。将所制备的毛细管整体柱装于纳升级高效液相色谱仪上进行牛血清白蛋白及血浆样本的胰蛋白酶酶切液的分离,获得了比较理想的分离效果。     

“一锅法”制备C18-硅胶杂化毛细管整体柱及其应用

本文发展了一种“一锅法”制备C18-硅胶杂化毛细管整体柱的方法。发展了一种“一锅法”制备有机-无机杂化毛细管整体柱的方法。首先将四甲氧基硅烷、乙烯基三甲氧基硅烷在弱酸条件下水解,然后加入有机单体(甲基丙烯酸-N,N-二甲基十八烷基溴化铵乙酯)及自由基聚合引发剂,同步原位完成硅羟基间的缩聚反应及双键间的自由基聚合反应,从而制成C18-硅胶杂化整体柱;同时用毛细管电色谱(CEC)和毛细管液相色谱(CLC)对其柱效和分离能力进行了初步评价,并将其应用到微柱液相色谱-串联质谱对牛血清白蛋白酶解液的分离分析。结果表明,该C18-硅胶杂化整体柱具有较高的柱效和较好的重现性,在分离分析复杂生物样品方面具有较大的应用前景。此外,本文所发展的方法在制备杂化整体柱的过程中不借助相应的硅烷试剂,为杂化整体柱的制备提供了一种新的思路。     

毛细管整体柱的制备技术及其应用进展

毛细管整体柱是以其制备相对简单无需烧结塞子,渗透性好,柱效高,低柱压等优点,成为目前备受关注的液相色谱固定相.它具有较好的重现性,可进行快速分离,已被应用于毛细管电色谱(CEC)和微柱高效液相色谱(μ-HPLC).本文主要介绍近几年毛细管整体柱的制备技术及其应用概况.     

毛细管电泳中的毛细管区段灌注及其相关技术

毛细管区段灌注是一种随手性毛细管电泳、亲和毛细管电泳和胶束电动力色谱-质谱发展而产生的实验技术。由于它能消除采用以上方法时遇到的缓冲溶液对检测的影响。因此引起人们的关注。本文对区段灌注技术的原理,区段灌注技术在手性毛细管电泳、亲和毛细管电泳和胶束电动力色谱中的应用,以及目前区段灌注技术存在的一些问题进行了评述。本文还对由区段灌注技术发展而来的逆流毛细管电泳、液相预柱毛细管电泳、多步配体进样等实验技术进行了简介。     

毛细管等电聚焦/加压毛细管电色谱二维分离体系在多肽分离中的应用

以毛细管等电聚焦(cIEF)为第一维分离模式,以反相加压毛细管电色谱(pCEC)为第二维分离模式,开展离线二维色谱分离研究,并对复杂肽段进行分离.羟丙基纤维紊(HPC)涂层的毛细管用于cIEF分离,对6种标准蛋白质的平均分离柱效约为31万.在毛细管末端引进电隔离槽,方便了第一维样品的收集.在加电6 kV下,第二维pCE...     

十八烷基改性纳米二氧化硅涂层毛细管柱在毛细管电色谱中的应用

采用液相沉积技术制备了纳米二氧化硅涂层毛细管,经十八烷基改性,将其作为开管毛细管电色谱(OTCEC)分离介质。研究了该涂层毛细管的电渗流行为,考察了烷基苯和多环芳烃的毛细管电色谱分离性能。结果表明,该涂层固定相对这些化合物表现出较强的疏水作用;增加液相沉积涂层次数有利于增加溶质的保留因子,四种多环芳烃和四种苯同系物在该柱上可实现基线分离。此外,该涂层制备简单、重现性好,并在应用中表现出较高的稳定性。     

一种新型硝化抑制剂的毛细管电泳与电色谱分析比较

本研究采用毛细管电泳与电色谱两种方法,在优化分离条件下将3,5-二甲基吡唑新型硝化抑制剂与土壤样品中的其它成分进行分离。通过比较其检出限及标准工作曲线证明:两种方法定量准确度相近,但毛细管电色谱法在实际样品的分离中具有明显的优势,是进一步研究该新产品的较好的分离分析方法。     

Dynamics of Capillary Rise

An overview and detailed analysis of the classical theory of capillarity is presented. A number of known equations of capillary rise dynamics are shown to be different limiting cases of one rather general equation. Some internal inconsistencies of the classical equations are pointed out. The role of nonlinear dissipation and flow pattern effects in the front zone of the liquid column and near the capillary entrance is discussed. Numerical simulations and experimental data demonstrating some characteristic types of dynamic behavior predicted by the theory are reported. Special attention is paid to the capillary rise of surfactant solutions. As applied to this special case, the existing theory is substantially elaborated by setting up a closed system of equations describing the surfactant transport and relaxation processes in the adsorption layer. A simplified relation for the capillary rise dynamics in the case of strong depletion of the interfacial region is obtained, which is in qualitative agreement with the experimental behavior. Copyright 2000 Academic Press.     

Capillary impregnation into cylinder banks

The capillary rise of liquid in a cylinder bank is examined in order to study the capillary pressure variation perpendicular to the direction of the cylinders. The calculations consider the local geometric variation of the flow channel and the position-dependent capillary pressure. The capillary flow around each cylinder is calculated by balancing the capillary pressure and the viscous drag along the flow path. The rate of filling for several layers of cylinders is used to estimate the equivalent capillary pressure. The method is also applied to the underfill of a flip chip system, which is modeled as a cylinder bank between parallel plates.     

Photoinduced Polymerization for Entrapping of Octadecylsilane Microsphere for Capillary Liquid Chromatography

A short length of a sol‐gel monolith was initially prepared as the temporary frit in a 100 μm inner diameter fused‐silica capillary by an in situ photopolymerization. The packed 4 μm octadecylsilane particles were then immobilized within the identical sol‐gel solution through the same photopolymerization process. The prepared fritless capillary column was examined for the chromatographic performance by the self‐developed capillary liquid chromatography system. Baseline separation of the model analytes was achieved including thiourea, benzene, toluene and ethylbenzene with the lowest theoretical plate height about 66 μm for the retained component. A scanning electron micrograph was used to characterize the temporary frit and entrapped microspheres. The inorganic polymer matrix in the microsphere‐packed column functioned to link microspheres at specific sphere‐sphere and sphere‐capillary contact points. Furthermore, the stability and porosity of the fritless column were systematically investigated by a simple flow method.     

Determination of Pollutant Phenols by Capillary High‐Performance Liquid Chromatography with UV Detection

This paper describes a liquid chromatographic method using a reversed phase capillary column coupled to an UV detector for the quantitation of thirteen pollutant phenols. Chromatographic separation was carried out with gradient elution at 25.0 ± 0.1°C. The two major anisocratic elution modes (gradient elution and temperature programming) were evaluated. The detection limit range was 10–81 pg (100 nL injected). The chromatographic method combined with liquid‐liquid extraction was applied to analysis of these compounds in river water. Recoveries of 75–103% were achieved for most of them.     

Capillary and packed column SFC/MS

A frit restrictor interface for capillary column supercritical fluid chromatography/mass spectrometry (SFC/MS) has been constructed and used for the analysis of high boiling point alkanes. Packed column SFC/MS is described using both a moving belt liquid chromatographic/mass spectrometric interface and a thermospray source in the filament-on mode.     

Capillary constant and surface tension of methane-nitrogen solutions: 1. Experiment

The differential version of the method of capillary rise has been used to measure the capillary constant and calculate the surface tension of methane-nitrogen solutions. Experiments have been conducted in the temperature range from 95 to 170 K at pressures up to 4 MPa. Experimental data on surface tension have been compared with the results of calculations by thermodynamic models. Equations are given which describe the dependence of the capillary constant of a solution on its temperature and composition.