首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
李晓萱  陈涛  伍胜利 《应用化学》2015,32(11):1319-1326
采用差示扫描量热法DSC研究了水性聚氨酯/功能化石墨烯(WPU/FGNs)纳米复合材料的非等温结晶行为,分别采用Ozawa方程、莫志深方程研究复合材料的非等温结晶动力学,并通过Kissinger方程计算了结晶过程中的活化能。 结果表明,石墨烯在复合材料的结晶过程中起到异相成核剂的作用,提高了复合材料的结晶起始温度、峰值温度和结晶速率;增加石墨烯的质量分数,复合材料的结晶维数增加;石墨烯增加至0.3%,复合材料的活化能从-47.74 kJ/mol降低至-53.60 kJ/mol,继续增加石墨烯至1.0%,复合材料的活化能增加至-41.74 kJ/mol。  相似文献   

2.
聚乳酸/纳米SiO_2复合材料的熔融和冷结晶行为   总被引:2,自引:0,他引:2  
采用熔融共混法制备了聚乳酸(PLLA)/纳米SiO2复合材料;利用透射电镜观察了复合材料的微观形貌;利用差示扫描量热仪测定了该复合材料的熔融行为和非等温冷结晶行为;利用Jeziorny法和Mo法研究了PLLA及其复合材料的非等温冷结晶动力学.结果表明,纳米SiO2在PLLA基体中具有良好的分散性和异相成核作用,使得PLLA基体的结晶峰向低温方向移动;复合体系的熔融温度和熔融焓的变化与SiO2的加入量密切相关.采用Jeziorny法和Mo法均可以很好地处理复合材料的非等温冷结晶过程.  相似文献   

3.
利用差示量热扫描热分析仪(DSC)测得了不同降温速率下聚乙交酯(PGA)的非等温结晶的温度-热焓曲线。分别通过Ozawa法、Jeziorny法和莫志深法对PGA的非等温结晶机理进行了分析。Ozawa法结果表明:在给定的温度范围内,Ozawa法并不适用于描述PGA的非等温结晶行为;Jeziorny法结果表明:不同降温速率下,PGA结晶过程的Avrami指数(n)接近4,PGA非等温结晶为均相成核、晶粒三维增长的过程;莫志深法结果表明:Avrami指数与Ozawa指数的比值(a)基本无变化,动力学参数f(T)随降温速率增加逐渐增大,即在更快的降温速率下,PGA结晶更充分,可获得更高的结晶度。通过Kissinger方程计算得到的PGA结晶扩散活化能为-66.9kJ/mol。  相似文献   

4.
用差示量热扫描热分析仪(DSC)测试了不同降温速率下聚2-吡咯烷酮(PPD)样品的温度-热焓曲线,样品黏均分子量为2.2×10~4,熔点为272℃。采用Jeziorny法、Ozawa法和莫志深法分析了PPD的非等温结晶动力学。结果表明,在给定降温速率范围内,Ozawa法不适用于描述PPD的非等温结晶动力学过程,Jeziorny法只适用于描述PPD的主结晶阶段,而莫志深法能很好地描述整个结晶过程。Jeziorny法处理结果表明,PPD主结晶阶段的Avrami指数(n)为1.68~1.78,晶体生长为准二维生长。莫志深法处理结果表明,在单位结晶时间里达到某一相对结晶度所需的降温速率随相对结晶度的增加而增大。用Kissinger方程求得PPD的非等温结晶活化能为-31.9kJ/mol。  相似文献   

5.
尼龙66/蒙脱土复合材料结晶行为的研究   总被引:8,自引:0,他引:8  
在密炼机中采用熔融共混法制备蒙脱土重量分数为 2 5 %、4 5 %的尼龙 6 6 /蒙脱土复合材料 .通过DSC法对非等温结晶行为及在 2 2 8~ 2 4 0℃范围内的等温结晶行为进行研究 ,并与纯尼龙 6 6进行比较 .从其等温和非等温结晶行为的研究表明 ,蒙脱土起成核剂的作用 ,它的填入使尼龙 6 6结晶速率提高 ,但填料与基体间的相互作用使其链段运动困难 ,结晶活化能提高 ;在研究的填料含量变化范围内 ,结晶行为变化不大 ,并且找到该复合材料在 2 2 8~ 2 34℃范围结晶对温度的不敏感区 ;对非等温结晶过程分析 ,刘结平 莫志深方程是适用的 ,而Ozawa方程则是不适用的 .  相似文献   

6.
聚丙烯-g-聚氨酯共聚物的非等温结晶动力学研究   总被引:4,自引:0,他引:4  
用DSC法研究了聚丙烯 (PP)和聚丙烯接枝聚氨酯的共聚物 (PP g PU)在不同冷却速率下的非等温结晶动力学 .用Avrami方程和莫志深改进法对DSC测定结果进行了处理 ,结果表明 ,PP g PU的动力学参数能很好的符合Avrami方程和莫志深改进方程 .PP接枝了聚氨酯支链后 ,结晶速率增大 ,球晶的生长和成核机制也相应发生改变 ,而其变化规律与接枝物的组成和结构密切相关  相似文献   

7.
去氢枞酸类成核剂改性聚丙烯的非等温结晶动力学研究   总被引:7,自引:0,他引:7  
对以去氢枞酸盐为成核剂的聚丙烯非等温结晶动力学进行了研究,用修正Avrami方程的Jexiorny法和莫志深法进行处理。结果表明:修正Avrami方程的Jeziorny方法和莫志深法都适用于去氢枞酸类成核剂改性的聚丙烯的非等温结晶动力学。在同样的降温速率下纯聚丙烯的t1/2比成核聚丙烯的t1/2要长,当降温速率为20K/min时,纯聚丙烯和成核聚丙烯的t1/2分别为0.78min和0.51min。同时从莫志深法得到的F(T)结果可以看出,达到相同的结晶度时纯聚丙烯所需的降温速率要大于成核聚丙烯所需的降温速率,说明成核剂的加入提高了聚丙烯的结晶速率。从Jeziorny法求出的纯聚丙烯和成核聚丙烯的Avrami指数分别为4.46和2.77,表明成核剂改变了聚丙烯的结晶成核和生长方式。  相似文献   

8.
聚丙烯/纳米蒙脱土复合材料的结晶动力学研究   总被引:5,自引:1,他引:5  
采用热分析方法,研究了聚丙烯/纳米蒙脱土复合材料(PP/CLAY)的等温结晶行为,并分别用Avrami方程和赵志英方法对所得数据进行了分析,研究结果表明,纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响,可提高聚丙烯的结晶速率并改善结晶结构。  相似文献   

9.
用DSC法研究了苯乙烯-丙烯等规立构嵌段共聚物的非等温结晶动力学。结果表明:冷却速率在5~20℃/min范围内,共聚物的非等温结晶动力学参数能很好地符合Avrami动力学方程,非等温结晶速率常数与冷却速率有关,动力学结晶能力则同时受到冷却速率和共聚物组成比的影响。文中还讨论了在非等温结晶条件下共聚物的结晶成核和生长方式与共聚物组成和结构的关系。联合Avrami方程和Ozawa方程推导的非等温结晶动力学方程较好地描述了iPS-b-iPP嵌段共聚物的非等温结晶动力学过程。  相似文献   

10.
表面接枝改性纳米二氧化硅填充聚丙烯的结晶行为   总被引:13,自引:0,他引:13  
应用差示扫描量热方法研究了纳米二氧化硅 (SiO2 )及其表面接枝改性对聚丙烯 (PP)结晶过程、等温与非等温结晶动力学的影响 ,并研究了上述等温结晶的熔融行为和平衡熔点 .研究发现纳米SiO2 具有明显的异相成核效应 ,能够提高PP的结晶温度、熔融温度、结晶度和结晶速率 ,但降低聚丙烯结晶的完善程度 .粒子的表面接枝处理 ,因改善了粒子与基体的亲和性而有利于粒子成核效应的提高 ,而且此效应尚与粒子的分散相关  相似文献   

11.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

12.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

13.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

14.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

15.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

16.
Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.  相似文献   

17.
用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.  相似文献   

18.
19.
A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu0 as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than CuI in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).  相似文献   

20.
(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C60, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号