不同分子量聚L-乳酸的非等温结晶动力学研究

采用DSC方法研究了不同分子量聚乳酸在不同降温速率下的结晶过程,利用Ozawa方程和Kissinger方程研究了其非等温结晶动力学。结果表明,随着降温速率的增大和分子量增加,结晶峰向低温偏移,且峰形趋于平缓。求得分子量为2.6×104的聚乳酸的Ozawa指数m接近3,以异相成核的三维球晶生长为主,而分子量为14.3×104和19.2×104的聚乳酸的Ozawa指数m接近4,以均相成核的三维球晶生长为主,结晶活化能分别为-165.8kJ/mol、-82.1kJ/mol和-75.4kJ/mol。建立的"铰链"模型解释了不同分子量聚乳酸结晶活化能的显著差异,得到了聚乳酸分子量与结晶活化能的关系。     

PA13N的合成和非等温结晶动力学研究

采用DSC方法研究了PA13N在不同降温速率下的结晶过程,并利用Avrami方程研究了其非等温结晶动力学。在非等温结晶过程中,随着降温速率的增大,结晶温度向低温偏移。综合利用Avrami方程得到Avrami指数为1.35~1.88和结晶速率常数Zc≈1;并求得其结晶活化能为-58.42kJ/mol。结果表明,PA13N的结晶能力小于其他脂肪族尼龙。     

反式1,4-聚丁二烯的非等温结晶动力学研究

采用Nd(P5O7),-LiBu-AlEt3和AlEt3-VCI3两种催化剂体系分别合成了两种分子量与反式1,4单元结构含量不同的反式1,4-聚丁二烯样品(TPBD)。用DSC方法不仅研究了两样品六方相晶体的非等温结晶过程,同时还对单斜相结晶的非等温动力学过程进行了研究。Avrami方程分析显示,在低结晶度下TPBD六方相和单斜相的结晶生长过程呈现热成核的三维球晶生长。研究表明：虽然Ozawa方程在较低温度下能描述TPBD的六方相结构的实验数据,但不能完全描述在较高温度下六方相及单斜相非等温结晶过程,而用莫志深等建议的方程则能很好地描述TPBD六方相和单斜相非等温结晶过程。由Kissinger方程得到TPBD六方相和单斜相结晶的平均结晶活化能分别为-165．8kJ／mol和-220.5kJ／mol。     

聚乙交酯非等温结晶行为研究

利用差示量热扫描热分析仪(DSC)测得了不同降温速率下聚乙交酯(PGA)的非等温结晶的温度-热焓曲线。分别通过Ozawa法、Jeziorny法和莫志深法对PGA的非等温结晶机理进行了分析。Ozawa法结果表明:在给定的温度范围内,Ozawa法并不适用于描述PGA的非等温结晶行为;Jeziorny法结果表明:不同降温速率下,PGA结晶过程的Avrami指数(n)接近4,PGA非等温结晶为均相成核、晶粒三维增长的过程;莫志深法结果表明:Avrami指数与Ozawa指数的比值(a)基本无变化,动力学参数f(T)随降温速率增加逐渐增大,即在更快的降温速率下,PGA结晶更充分,可获得更高的结晶度。通过Kissinger方程计算得到的PGA结晶扩散活化能为-66.9kJ/mol。     

弹性散射法研究间规聚苯乙烯的冷结晶行为

用弹性光散射方法研究了间规聚苯乙烯(s-PS)的非等温冷结晶行为和等温结晶动力学.结果表明,弹性散射信号对s-PS的冷结晶过程中的构象变化非常敏感.弹性散射法所得的大分子链玻璃化转变温度Tg以及冷结晶温度Tc与DSC的测量结果一致.此外,通过散射强度随温度的变化可以更为清晰地分辨出冷结晶过程中各个阶段,包括晶体成核期,晶核生长期以及二次结晶期.通过等温弹性散射测试,同时结合Arrhenius方程,计算得到s-PS冷结晶表观活化能Ea为309 kJ/mol.     

尼龙66/蒙脱土复合材料结晶行为的研究

在密炼机中采用熔融共混法制备蒙脱土重量分数为 2 5 %、4 5 %的尼龙 6 6 /蒙脱土复合材料 .通过DSC法对非等温结晶行为及在 2 2 8～ 2 4 0℃范围内的等温结晶行为进行研究 ,并与纯尼龙 6 6进行比较 .从其等温和非等温结晶行为的研究表明 ,蒙脱土起成核剂的作用 ,它的填入使尼龙 6 6结晶速率提高 ,但填料与基体间的相互作用使其链段运动困难 ,结晶活化能提高 ;在研究的填料含量变化范围内 ,结晶行为变化不大 ,并且找到该复合材料在 2 2 8～ 2 34℃范围结晶对温度的不敏感区 ;对非等温结晶过程分析 ,刘结平 莫志深方程是适用的 ,而Ozawa方程则是不适用的 .     

乙烯含量对抗冲丙烯共聚物等温结晶行为的影响

利用DSC研究了乙烯含量不同的4种抗冲丙烯共聚物的等温结晶动力学.结果表明4种样品在考察的温度范围内(126~130℃)的等温结晶动力学完全符合Avrami方程,并得到了不同结晶温度下Avrami方程的结晶动力学参数k,n和t1/2,随着样品中乙烯含量的增加,Avrami指数(n)随温度变化不大,样品的结晶过程可能属于三维扩散控制的成核增长,4种样品的结晶活化能ΔE在279.5~343.1 kJ/mol范围内,且随乙烯含量增加,结晶活化能增大,充分说明样品中的乙烯含量是影响其结晶活化能的主要因素.结晶分级分析测试结果显示,随着乙烯含量的增加,聚丙烯均聚物部分链结构规整性提高,结构规整、可结晶的长序列含量在减少,可见乙烯含量的变化规律直接决定上述参数的变化规律.     

聚丙烯/蒙脱土纳米复合材料非等温结晶动力学的研究

用熔融插层法制备聚丙烯 蒙脱土纳米复合材料 ,用DSC手段研究了其非等温结晶行为 ,并与聚丙烯进行了对比 .对所得数据分别用修正Avrami方程的Jeziorny法、Ozawa法和Mo法进行处理 .结果表明 ,用Jeziorny法和Mo法处理非等温结晶过程比较理想 ,而用Ozawa法处理则不太适用 .用Jeziorny法求出的参数Zc和n随冷却速率的增加而增加 ,但复合材料的Zc 和n略大于聚丙烯的Zc 和n ,用Mo法求出的参数F(T)随结晶度的增加而略有增加 ,a几乎未变 ,复合材料的F(T)略小于聚丙烯的F(T) ,复合材料的a约为 1.40略大于聚丙烯的a(其值约为 1.0 4) .按Kissinger方法计算出聚丙烯及聚丙烯 蒙脱土纳米复合材料的结晶活化能分别为 189.37kJ mol,15 5 .6 9kJ mol,说明有机蒙脱土的加入 ,降低了聚丙烯的结晶活化能 ,起到了异相成核的作用     

聚2-吡咯烷酮的非等温结晶动力学

用差示量热扫描热分析仪(DSC)测试了不同降温速率下聚2-吡咯烷酮(PPD)样品的温度-热焓曲线,样品黏均分子量为2.2×10~4,熔点为272℃。采用Jeziorny法、Ozawa法和莫志深法分析了PPD的非等温结晶动力学。结果表明,在给定降温速率范围内,Ozawa法不适用于描述PPD的非等温结晶动力学过程,Jeziorny法只适用于描述PPD的主结晶阶段,而莫志深法能很好地描述整个结晶过程。Jeziorny法处理结果表明,PPD主结晶阶段的Avrami指数(n)为1.68~1.78,晶体生长为准二维生长。莫志深法处理结果表明,在单位结晶时间里达到某一相对结晶度所需的降温速率随相对结晶度的增加而增大。用Kissinger方程求得PPD的非等温结晶活化能为-31.9kJ/mol。     

聚丁二酸丁二醇酯的自成核结晶行为

利用差示扫描量热仪(DSC)研究了自成核对聚丁二酸丁二醇酯(PBS)的结晶行为的影响. 研究结果表明, PBS的有效自成核温度处理区间为118～120 ℃. PBS经自成核处理后结晶温度提高, 可以在100~118 ℃温度区间内迅速结晶. 同时, 研究了自成核处理后样品在100～104 ℃范围内的等温结晶行为、动力学过程及熔融行为. 结果表明, 随着等温结晶温度的升高, 结晶速率变慢, 熔融曲线出现多重熔融峰. Hoffman-Weeks方程分析结果表明, 自成核处理对PBS的平衡熔点没有影响. Avrami等温结晶动力学方程适合分析自成核处理样品的等温结晶动力学过程, 获得其动力学参数K与n, 其中n值偏大的原因在于自成核的样品结晶生长点增多. 根据Arrhenius方程, 计算获得PBS自成核处理后等温结晶活化能为-286 kJ/mol.     

Estimating the activation energy for non-isothermal crystallization of polymer melts

The advanced isoconversional method can be used to determine the effective activation energy of non-isothermal crystallization of the polymer melts. The method has been applied to DSC data on crystallization of poly(ethylene terephthalate) (PET). The resulting activation energy increases with the extent of crystallization from -270 to 20 kJ mol^-1. The variation is interpreted in terms of the Turnbull and Fisher crystallization theory. This revised version was published online in July 2006 with corrections to the Cover Date.     

Morphology, isothermal and non-isothermal crystallization kinetics of poly(methylene terephthalate)

The morphology of crystals, isothermal and non-isothermal crystallization of poly(methylene terephthalate) (PMT) have been investigated by using polarized optical microscopy and differential scanning calorimeter (DSC). The POM photographs displayed only several Maltese cross at the beginning short time of crystallization indicating that some spherulites had been formed. The crystal cell belonged to the Triclinic crystal systems and the cell dimensions were calculated from the WAXD pattern. The commonly used Avrami equation and that modified by Jeziorny were used, respectively, to fit the primary stage of isothermal and non-isothermal crystallization. The Ozawa theory was also used to analyze the primary stage of non-isothermal crystallization. The Avrami exponents n were evaluated to be in the range of 2-3 for isothermal crystallization, and 3-4 for non-isothermal crystallization. The Ozawa exponents m were evaluated to be in the range of 1-3 for non-isothermal crystallization in the range of 135-155 °C. The crystallization activation energy was calculated to be −78.8 kJ/mol and −94.5 kJ/mol, respectively, for the isothermal and non-isothermal crystallization processes by the Arrhenius’ formula and the Kissinger’s methods.     

硅藻土负载AgO复合材料的制备及热分解非等温动力学

采用化学氧化沉淀法, 以过硫酸钾为氧化剂制备了硅藻土负载过氧化银(AgO)复合材料, 并使用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和激光粒度仪对其进行了表征, 借助热重(TG)分析研究了复合材料的热分解过程和非等温热分解动力学. 结果表明, 制备的复合材料为正方晶系方英石和单斜晶系AgO混合体, 且AgO质量分数为12.7%; 复合材料的中位径为18.53 μm, 比表面积为203.32 m²/kg, 颗粒的粒度分布在0.614~116.5 μm之间. 复合材料中AgO在171 ℃开始分解成Ag₂O, 在更高温度时Ag₂O进一步分解成Ag; 热分解反应服从以核生成和核成长为控制步骤的A1机理, 其热分解表观活化能为131.37 kJ/mol, 反应频率因子为3.19×10¹³ s^-1. 同自制的AgO粉末相比, 复合材料中AgO的热分解温度升高, 表观活化能上升约40 kJ/mol.     

Probing the effects of interfacial chemistry on the kinetics of phase transitions in amorphous and tetragonal zirconia nanocrystals

In this work, we examine the phase stability of both uncoated and alumina-coated zirconia nanoparticles using in-situ X-ray diffraction. By tracking structural changes in these particles, we seek to understand how changing interfacial bonding affects the kinetics of amorphous zirconia crystallization and the kinetics of grain growth in both initially amorphous and initially crystalline zirconia nanocrystals. Activation energies associated with crystallization are calculated using nonisothermal kinetic methods. The crystallization of the uncoated amorphous zirconia colloids has an activation energy of 117 +/- 13 kJ/mol, while that for the alumina-coated amorphous colloids is 185 +/- 28 kJ/mol. This increase in activation energy is attributed to inhibition of atomic rearrangement imparted by the alumina coating. The kinetics of grain growth are also studied with nonisothermal kinetic methods. The alumina coating again dramatically affects the activation energies. For colloids that were coated with alumina when they were in an amorphous structure, the coating imparts a 5x increase in the activation energy for grain growth (33 +/- 8 versus 150 +/- 30 kJ/mol). This increase shows that the alumina coating inhibits zirconia cores from coarsening. When the colloids are synthesized in the tetragonal phase and then coated with alumina, the effect of surface coating on coarsening kinetics is even more dramatic. In this case, a 10x increase in activation energies, from 28 +/- 3 kJ/mol for the uncoated particles to 300 +/- 25 kJ/mol for the alumina-coated crystallites, is found. The results show that one can alter phase stability in colloidal systems by using surface coatings and interfacial energy to dramatically change the kinetic barriers to structural rearrangement.     

聚对苯二甲酰十碳二胺的制备和非等温结晶动力学研究

以对苯二甲酸和癸二胺为原料,经成盐,预聚合和固相聚合三个步骤合成了新型长碳链和较高相对分子质量的半芳香尼龙聚对苯二甲酰十碳二胺,由红外光谱和核磁共振对其结构进行了确认。用DSC方法研究了聚对苯二甲酰十碳二胺的非等温结晶动力学,用莫志深提出的R～f法对非等温结晶动力学进行了分析,由R～t法得到α值在0.70～0．81之间。利用Kissinger方法求得了半芳香尼龙的非等温结晶活化能,△E=-297．08kJ／mol。     

聚-4-乙基苯酚抗氧剂对聚丙烯结晶行为的影响

通过差示扫描量热仪(DSC)和X射线粉末衍射仪(XRD)研究了聚-4-乙基苯酚抗氧剂对聚丙烯结晶行为的影响。 分别用Jeziorny法和Mo法处理非等温结晶动力学。 同时用Friedman法和Kissinger法计算其结晶活化能。 最后由结晶活化能与结晶温度的变化曲线求得Hoffman-Lauritzen参数成核速率常数(K_g)和迁移活化能(U^*)值,进而求得折叠链端表面自由能(σ_e)和分子链段折叠功(q)。 结果表明,抗氧剂的加入,使聚丙烯的结晶峰温度向低温区移动,结晶半峰宽变大,半结晶时间(t_1/2)增大,Jeziorny法所得的结晶速率常数(Z)降低,Mo法所得反映结晶速率快慢的参数F(T)提高,在相同结晶转化率下,结晶活化能负值变小。 Hoffman-Lauritzen参数K_g、U^*、σ_e和q值均增大。 所有变化均表明聚-4-乙基苯酚抗氧剂对PP的结晶有抑制作用。     

PE/Org-MMT nanocomposites

The non-isothermal crystallization kinetics of polyethylene (PE), PE/organic-montmorillonite (Org-MMT) composites were investigated by differential scanning calorimetry (DSC) with various cooling rates. The Avrami analysis modified by Jeziorny and a method developed by Mo were employed to describe the non-isothermal crystallization process of these samples very well. The difference in the exponent n between PE and PE/Org-MMT nanocomposites, indicated that non-isothermal kinetic crystallization corresponded to tridimensional growth with heterogeneous nucleation. The values of half-time, Z_c and F(T) showed that the crystallization rate increased with the increasing of cooling rates for PE and PE/Org-MMT composites, but the crystallization rate of PE/Org-MMT composite was faster than that of PE at a given cooling rate. The method developed by Ozawa did not describe the non-isothermal crystallization process of PE very well. Moreover, the method proposed by Kissinger was used to evaluate the activation energy of the mentioned samples. The results showed that the activation energy of PE/Org-MMT was greatly larger than that of PE. This revised version was published online in July 2006 with corrections to the Cover Date.