Silica Hybrid Containing （ R ）-2, 2＇-Binaphtho-20-crown-6 Moieties via the Sol-Gel Process

(R)-6,6‘-Bis(triethoxysilylethen-2-yl)-2,2-‘binaphtho-20-crown-6(precursor,R-2) derived form(R)-2,2-BINOL derivative was synthesized by Pd-catelyzed Heck reaction of (R)-6-6‘-dibromo-2,2‘-binaphtoh-20-crown-6(R-1) intermediate with vinyltriethoxysilane. The hydrolysis and polycondensatlon ofthe precursor gave rise to the corresponding xerogei. Both pre cursor and xerogei were analysed by NMR, FT-IR, UV, CD spectra, fluorescent spectroscopy, polarimetry and elemental analysis. The precursor and xerogei can emit strong blue fluorescenee and are expected to have the potential appficatiou inthe separation of chiral molecules as fluorescent sensor. The precursor exhibits strong Cotton effect in its circular dichroism (CD) spectrum indicating that it is a highly rigid structure.     

Synthesis and Evaluation of Thiol Polymers

Thiol polymer, which is known as a reactive and functional polymer, is synthesized and evaluated quantitatively by the modified Ellman method. The synthesis was accomplished by 1) hydrolysis of an isothiouronium salt that is the adduct of 4‐chloromethylstyrene (CMS) homopolymer or CMS‐styrene (St) copolymer with thiourea; 2) hydrolysis of a precursor copolymer made from 4‐vinylbenzyl N‐ethyldithio‐carbamate (VBEC) and St or N‐vinyl‐2‐pyrrolidone (NVP); 3) solvolysis of an iminium salt polymer obtained from the reaction of CMS‐NVP copolymer with N,N‐dimethylthioformamide (TDMF). When a higher thiol content is desired, more severe hydrolysis conditions are required which however, also increase the loss of thiol. Hence, it is clear that the best synthesis of thiol polymers is Method 3. A quantitative yield of functional thiol polymer is obtained by this method, and the product is soluble in DMSO, DMF, and CHCI_3.     

Supramolecular Structures,Organization and Surface Behavior at Interfaces

The surface behavior of Supramolecular Structures as inclusion complexes^[1] were studied. The inclusion complexes (ICs) obtained from the threading of α-cyclodextrin (α-CD) with poly(ε-caprolactone) (PEC) and derivatives as precursor homopolymers were prepared and characterized by ¹H-NMR and FT-IR Microscopy. In order to investigate the influence of the chemical structure of the other precursor homopolymers as poly(ethylene oxide) (PEO) and poly(tetrahydrofuran) (PTHF), the inclusion complexes (ICs) were also obtained from the threading of α-cyclodextrin (α-CD) with these polymers. Surface pressure-area isotherm (π-A) at the air-water interface were determined by the Langmuir Technique for all the ICs and their polymers. Due to solubility reasons, different spreading solvents were used. In a set of control experiments, it was observed that the spreading volume did not influence significantly the isotherms for any polymeric systems studied. It was found that the hydrophobic and hydrophilic balance changes with the increasing of the methylene and hydroxyls groups number in the chemical structures of the precursor polymers involved in the ICs. The degree of hydrophobicity of the different supramolecular systems was also estimated from the determination of the surface free energy (SE) values using the wettability measurements.^[2] In order to describe the experimental behavior of the ICs and the precursor polymers, molecular dynamics simulation (MDS) were performed. The radial distribution functions (RDF) between water molecules and hydrophilic and hydrophobic moieties of the polymeric systems studied were analized. By this way it was possible to visualize the orientation and the organization of these supramolecular structures at the air-water interface.     

The synthesis of 4-benzylamino-6-methyl-1H-pyrrolo[3, 2-c]pyridine and 4-benzylamino-6-methyl-1H-pyrrolo[2, 3-b]pyridine

4-Benzylamino-6-methyl-1H-pyrrolo[3,2-c]pyridine ( 2 ) and 4-benzylamino-6-methyl-1H-pyrrolo[2,3-b]pyridine ( 3 ) were synthesized as deaza analogues of the anxiolytic agent 4-benzylamino-2-methyl-7H-pyrrolo[2,3-d]pyrimidine ( 1 ). The 1-deaza analogue (2) was prepared via a multi-step procedure from a pyrrole precursor, 1-benzyl-2-formylpyrrole ( 4 ) while the 3-deaza analogue 3 was synthesized from a pyridine precursor, 2-amino-3,6-dimethylpyridine ( 12 ).     

Effects of the acid chain length and copolymer crosslinking on the acylation of N-hydroxysuccinimide copolymers with carbobenzoxyoligo-ϵ-aminocaproic acids

N-Hydroxysuccinimide-type soluble copolymer with styrene and three similar divinylbenzene (3–4 mole-%) crosslinked copolymers with styrene, N-vinylpyrrolidone, and N,N-dimethylacrylamide were prepared from their precursor copolymers of N-acetoxymaleimide. Acylation of these N-hydroxyl polymers with carbobenzoxyoligo-?-aminocaproic acids was conducted in dimethylformamide at room temperature by using dicyclohexylcarbodiimide as condensing agent. The soluble styrene copolymer was acylated in good conversions (76–89%) in every case (n = 1–3), whereas the acylation of the crosslinked copolymers decreased slightly from n = 1 to n = 2, and dropped suddenly to only small conversions (4.7–7.4%) with n = 3, showing a marked inhibitory effect of crosslinking when the acids became longer. The effect of the microenvironment of the polymer did not appear significant. All the acyl polymers, including the precursor polymers, yielded the corresponding cyclohexylamides when treated with cyclohexylamine.     

Total Synthesis of (−)-Rotundone and (−)-epi-Rotundone from Monoterpene Precursors

The first total synthesis of (−)-rotundone has been accomplished from (+)-(R)-limonene and therefore for the first time from an unrelated monoterpene instead of modifying structurally closely related sesquiterpene precursors such as α-guaiene. Challenges such as intermediates with stereocenters prone to epimerization by enolization were overcome by designing a β-methyl-keto route starting from (+)-(R)-limonene which finally gave (−)-rotundone by Nazarov cyclization of a precursor 13a . Diastereomer (−)-epi-rotundone was separated from (−)-rotundone chromatographically. An alternative route from rac-citronellal provided a diastereomer mixture of racemic Nazarov precursor 13 through a TRIP-catalyzed intramolecular aldolization, thus indicating that the Nazarov cyclization precursor 13a is in principle accessible from (−)-(S)-citronellal. The 11-step synthesis from (+)-(R)-limonene with ca. 1 % overall yield confirmed the absolute configuration of (−)-rotundone and provided samples of good olfactory quality.     

N=8 Armchair Graphene Nanoribbons: Solution Synthesis and High Charge Carrier Mobility**

Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1 eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives ( 1 and 2 ) as subunits of 8-AGNR , with a width of 0.86 nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR . The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to ∼2400 nm, corresponding to an optical band gap as low as ∼0.52 eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of ∼270 cm² V⁻¹ s⁻¹ for the 8-AGNR .     

Molecular adsorption and the chemistry of plasma-deposited thin organic films: Deposition of oligomers of ethylene glycol

Weakly ionized, radio-frequency, glow-discharge plasmas formed from methyl ether or the vapors of a series of dimethyl oligo(ethylene glycol) precursors (general formula: H-(CH₂OCH₂)_n-H;n=1 to 4) were used to deposit organic thin films on polytetrafluoroethylene. X-ray photoelecton spectroscopy (XPS) and static secondary ion mass spectrometry (SIMS) of the thin films were used to infer the importance of adsorption of molecular species from the plasma onto the surface of the growing, organic film during deposition. Films were prepared by plasma deposition of each precursor at similar deposition conditions (i.e., equal plasma power (W), precursor flow rate (F), and deposition duration), and at conditions such that the specific energy (energy/mass) of the discharge (assumed to be constrained byW/FM, whereM=molecular weight of the precursor) was constant. At constantW/FM conditions, two levels of plasma power (and, hence, twoFM levels) and three substrate temperatures were examined. By controlling the energy of the discharge (W/FM) and the substrate temperature, these experiments enabled the study of effects of the size and the vapor pressure of the precursor on the film chemistry. The atomic % of oxygen in the film surface, estimated by XPS, and the intensity of theC-O peak in the XPS C_ls spectra of the films, were used as indicators of the degree of incorporation of precursor moieties into the plasma-deposited films. Analysis of films by SIMS suggested that these two measures obtained from XPS were good indicators of the degree of retention in the deposited films of functional groups from the precursors. The XPS and SIMS data suggest that adsorption of intact precursor molecules or fragments of precursor molecules during deposition can have a significant effect on film chemistry. Plasma deposition of low vapor pressure precursors provides a convenient way of producing thin films with predictable chemistry and a high level of retention of functional groups from the precursor.     

N,N,N‐Trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate a precursor for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[18F]‐fluoronicotinate

The synthesis, recrystallization, and X‐ray deterimination of N,N,N‐trimethyl‐5‐[(2,3,5,6‐tetrafluorophenoxy)carbonyl]pyridin‐2‐aminium trifluoromethanesulfonate (PyTFP‐precursor), C₁₅H₁₃F₄N₂O₂⁺·CF₃SO₃⁻, is described. This triflate salt precursor is required for the synthesis of 2,3,5,6‐tetrafluorophenyl 6‐[¹⁸F]‐fluoronicotinate ([¹⁸F]FPyTFP), a prosthetic group used to radiolabel peptides for positron emission tomography (PET), as peptides are increasingly being used as PET‐imaging probes in nuclear medicine. Radiolabeling of peptides is typically done using a `prosthetic group', a small synthon to which the radioisotope is attached in the first step, followed by attachment to the peptide in the second step. During the synthesis of the PyTFP‐precursor, displacement of a Cl atom with trimethylamine gas and anion replacement with a triflate counter‐ion is critical, as incomplete replacement would hinder radioisotopic incorporation of nucleophilic fluorine‐18 and result in diminished radiochemical yields. The structural determination of the PyTFP‐precursor by X‐ray crystallography helped confirm the anion exchange of chloride with triflate.     

Formal Total Synthesis of the Algal Toxin (−)‐Polycavernoside A

A concise and largely catalysis‐based approach to the potent algal toxin polycavernoside A ( 1 ) is described that intercepts a late‐stage intermediate of a previous total synthesis; from there on, this challenging target can be reached in a small number of steps. Key to success was a sequence of a molybdenum‐catalyzed ring‐closing alkyne metathesis (RCAM) reaction to forge the macrocyclic frame, followed by a gold‐catalyzed and strictly regioselective transannular hydroalkoxylation of the resulting cycloalkyne that allows the intricate oxygenation pattern of the macrolactone ring of 1 to be properly set. The required cyclization precursor 5 was assembled by the arguably most advanced fragment coupling process based on an Evans–Tishchenko redox esterification known to date, which was optimized to the extent that the precious coupling partners could be used in an almost equimolar ratio ( 6 / 7 1:1.3). The preparation of these building blocks features, inter alia, the power of the Sc(OTf)₃‐catalyzed Leighton crotylation as well as the superb selectivities of alkene cross metathesis, asymmetric keto‐ester hydrogenation, and the Jacobsen epoxidation/epoxide resolution technologies.     

Development and validation of a rapid and high‐sensitivity liquid chromatography–tandem mass spectrometry assay for the determination of neostigmine in small‐volume beagle dog plasma and its application to a pharmacokinetic study

A simple, rapid and high sensitive liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the determination of neostigmine in small‐volume beagle dog plasma was developed to assess the plasma pharmacokinetics of neostigmine. After protein precipitation in a Sirocco 96‐well filtration plate, the filtrate was directly injected into the LC‐MS/MS system. The analytes were separated on a Hanbon Hedera CN column (100 × 4.6 mm, 5 µm) with a mobile phase composed of methanol–water (60:40, v/v) and the water containing 0.01% formic acid at a flow rate of 0.6mL/min, with a split ratio of 1:1 flowing 300 μL into the mass spectrometer. The run time was 3 min. Detection was accomplished by electrospray ionization source in multiple reactions monitoring mode with the precursor‐to‐product ion transitions m/z 223.0 → 72.0 and 306.0 → 140.0 for neostigmine and anisodamine (internal standard), respectively. The method was sensitive with a lower limit of quantitation of 0.1 ng/mL, and good linearity in the range 0.1–100ng/mL for neostigmine (r ≥ 0.998). All the validation data, such as accuracy, intra‐run and inter‐run precision, were within the required limits. The method was successfully applied to pharmacokinetic study of neostigmine methylsulfate injection in beagle dogs. Copyright © 2013 John Wiley & Sons, Ltd.     

BaTi<Subscript>1–x</Subscript>Zr<Subscript>x</Subscript>O<Subscript>3</Subscript> nanopowders prepared by the modified Pechini method

The results reported here based on a study of BaTi_1–xZr_xO₃ (x=0, 0.2 and 1) nanometric powders prepared by the modified Pechini method. The powder samples annealed from 600 to 1000°C/2 h were characterized by thermogravimetric analysis (TG), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The decomposition reactions of resins were studied using thermal analysis measurements. The barium titanate zirconate system presented just one orthorhombic phase. Furthermore, this study produced BaTiO₃ powders with a tetragonal structure using shorter heat treatments and less expensive precursor materials than those required by the traditional methods.     

Total Synthesis and Conformational Study of Callyaerin A: Anti‐Tubercular Cyclic Peptide Bearing a Rare Rigidifying (Z)‐2,3‐ Diaminoacrylamide Moiety

The first synthesis of the anti‐TB cyclic peptide callyaerin A ( 1 ), containing a rare (Z)‐2,3‐diaminoacrylamide bridging motif, is reported. Fmoc‐formylglycine‐diethylacetal was used as a masked equivalent of formylglycine in the synthesis of the linear precursor to 1 . Intramolecular cyclization between the formylglycine residue and the N‐terminal amine in the linear peptide precursor afforded the macrocyclic natural product 1 . Synthetic 1 possessed potent anti‐TB activity (MIC₁₀₀=32 μm ) while its all‐amide congener was inactive. Variable‐temperature NMR studies of both the natural product and its all‐amide analogue revealed the extraordinary rigidity imposed by this diaminoacrylamide unit on peptide conformation. The work reported herein pinpoints the intrinsic role that the (Z)‐2,3‐diaminoacrylamide moiety confers on peptide bioactivity.     

A New Method of Synthesis of Azo Schiff Base Ligands with Azo and Azomethine Donors： Synthesis of N-4-Methoxybenzylidene-2-（3-hydroxyphenylazo）-5-hydroxyaniline and Its Nickel（Ⅱ） Complex

A new method for the synthesis of azo Schiff an base ligand in which the azo and azomethine groups are coordination sites was developed through a Schiff base precursor. The precursor, N-4-methoxybenzylidene-3-hydroxyphenylamine （SB） derived from 3-aminophenol was regioselectively coupled with a diazonium ion para to the hydroxyl group of the amine component of the Schiff base. The para selectivity was controlled by the directing effect of the hydroxyl group. The ligand and its nickel（Ⅱ） complex were characterized by elemental analyses, IR and UV-Vis spectroscopy. The analytical and spectral data supported the mononuclear formulation of the complex with metal to ligand ratio （M ： L = 1 ： 2） and suggested a square planar geometry for the complex.     

Preparation and characterization of nanocrystalline ZnO by direct precipitation method

Nanocrystalline ZnO was prepared with ZnCl₂·2H₂O and (NH₄)₂CO₃ as raw materials by direct precipitation method. The precursor was proved to be [Zn₅(OH)₆(CO₃)₂] by TG-DTG-DTA and IR analysis. This precursor was calcined at 300°C for 1, 2 and 3 hours respectively, and then the nanocrystalline ZnO of different grain size were obtained. The nanocrystalline ZnO was characterized using X-ray diffraction (XRD), TEM and Brunner-Emmett-Teller method (BET). Experimental results for nanocrystalline ZnO showed that the minimum size was about 8nm, the maximum was about 15 nm and the mean grain size was 12 nm, the surface area was 80.56 m²/g and the purity was 99.9% when the precursor was calcined at 300°C for 2 h. __________ Translated from Journal of Inner Mongolia Normal University (Natural Science Edition), 2006, 35(1) (in Chinese)     

Radical polymerizations of two stereoisomeric trimethacrylates with rigid adamantane‐like cores from naturally occurring myo‐inositol

Two stereoisomeric trimethacrylates, T1 and T2 , which share a common adamantane‐like rigid core, were synthesized from naturally occurring myo‐inositol, and their radical polymerization behaviors were investigated. For the synthesis of T1 , myo‐inositol was converted to triol 1 , bearing one equatorial hydroxyl group and two axial hydroxyl groups, by orthoesterification, which was used as a precursor. For the synthesis of T2 , 1 was converted to triol 2 , bearing three axial hydroxyl groups, which was used as a precursor. Investigations on the radical polymerization of T1 and T2 , which potentially accompanies the cyclopolymerization of the axially oriented methacrylate moieties, revealed significant differences between the two. (1) The polymerization of T1 affords networked and thus insoluble polymers PT1 , while that of T2 affords less crosslinked and thus soluble polymers PT2 . (2) The amount of residual methacrylate moieties was larger in PT2 than in PT1 . (3) PT2 had higher thermal stability than PT1 , though PT2 contained a larger amount of unreacted methacrylate moieties. These tendencies were successfully correlated with the difference in cyclopolymerization efficiency between the polymerizations of the two monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1743–1748     

Measurement of Nitrogen Mustard Degradation Products by Poly(dimethylsiloxane) Microchip Electrophoresis with Contactless Conductivity Detection

A poly(dimethylsiloxane) (PDMS) microfluidic device with contactless conductivity detection for the determination of nitrogen mustard degradation products is reported. Three alkyl ethanolamines: N‐methyldiethanolamine (MDEA), N‐ethyldiethanolamine (EDEA), and triethanolamine (TEA), (degradation/ precursor products of HN‐1, HN‐2 and HN‐3 blister agents) were analyzed by microchip capillary electrophoresis (CE). The original PDMS channel was coated by poly(ethyleneimine) (PEI) to improve the separation of three ethanolamines. Experimental conditions for the separation and detection processes have been optimized to yield well defined separation and high sensitivity. The response times for the three ethanolamines were less than 5 min., the detection limits were 2.0–4.0 mg L^?1 and the relative standard derivations for the migration times and peak heights were 1.6–2.3% and 4.1–5.7%, respectively. The linearity of calibration for each of the compounds was as follows: MDEA, r²=0.970; EDEA, r²=0.994; TEA, r²=0.988. Applicability of this method for natural (lake and tap) water samples was also demonstrated. Compared to conventional analytical methods, this miniaturized system offers promise for on‐site monitoring of degradation products of the nitrogen mustard class of chemical warfare agents, with advantages of cost‐effective construction, simple operation, portability, and small required sample volumes.     

New synthetic route for photosensitive poly(benzoxazole)

A new positive working photosensitive poly(benzoxazole) (PBO) precursor based on poly(o‐hydroxyazomethine) ( 3 ) and 1‐{1,1‐bis[4‐(2‐diazo‐1‐(2H)naphthalenone‐5‐sulfonyloxy)phenyl]ethyl}‐4‐{1‐[4‐(2‐diazo‐1(2H)naphthalenone‐5‐sulfonyloxy)phenyl]methylethyl}benzene (S‐DNQ) as a photosensitive compound was developed. 3 was prepared by the condensation of 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane with isophthalaldehyde in 1‐methyl‐2‐pyrrolidinone/toluene under azeotropic conditions. The photosensitive PBO precursor containing 30 wt % S‐DNQ showed a sensitivity of 120 mJ cm^?2 and a contrast of 2.2 when it was exposed to 436‐nm light and developed with a 2.38 wt % aqueous tetramethylammonium hydroxide solution at room temperature. A fine positive image featuring 10‐μm line and space patterns was observed on the film of the photoresist exposed to 200 mJ cm^?2 ultraviolet light at 436 nm by the contact mode. The positive image was successfully converted into the PBO pattern by a thermal treatment. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3399–3405, 2002     

Synthesis of polycarbosilanes having sugar‐derived structures as novel materials for cell cultivation

Polycarbosilanes with or without sugar‐derived structures in the polymer side chains were synthesized and their application to materials for cell cultivation was investigated. Polysilacyclobutanes having glucose‐derived moieties or N‐acetylglucosamine‐derived moieties (polyBMSB‐glucose and polyBMSB‐AGA) were synthesized by ene‐thiol reaction between precursor poly(1‐(3‐butenyl)?1‐methylsilacyclubane) (polyBMSB) and tetraacetylglucose or tetraacetylglucosamine having a thiol group at the anomeric position and the successive deprotection of the acetyl groups gave polycarbosilanes with sugar‐derived structures in the side chains. Poly(1‐(3‐hydroxybutyl)‐1‐methylsilacyclobutane) was synthesized by hydroboration/oxidation of the precursor polyBMSB. The cell cultivation efficiency using the polymers with or without sugar moieties was evaluated by cultivation of WRL cells on the polystyrene dishes coated with the polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2267–2272     

Phosphorus‐Doped Carbon Nitride Tubes with a Layered Micro‐nanostructure for Enhanced Visible‐Light Photocatalytic Hydrogen Evolution

Phosphorus‐doped hexagonal tubular carbon nitride (P‐TCN) with the layered stacking structure was obtained from a hexagonal rod‐like single crystal supramolecular precursor (monoclinic, C2/m). The production process of P‐TCN involves two steps: 1) the precursor was prepared by self‐assembly of melamine with cyanuric acid from in situ hydrolysis of melamine under phosphorous acid‐assisted hydrothermal conditions; 2) the pyrolysis was initiated at the center of precursor under heating, thus giving the hexagonal P‐TCN. The tubular structure favors the enhancement of light scattering and active sites. Meanwhile, the introduction of phosphorus leads to a narrow band gap and increased electric conductivity. Thus, the P‐TCN exhibited a high hydrogen evolution rate of 67 μmol h^?1 (0.1 g catalyst, λ >420 nm) in the presence of sacrificial agents, and an apparent quantum efficiency of 5.68 % at 420 nm, which is better than most of bulk g‐C₃N₄ reported.