Elaboration of densely functionalized polylactide nanoparticles from N‐acryloxysuccinimide‐based block copolymers

Poly(N‐acryloxysuccinimide) (PNAS) and poly(N‐acryloxysuccinimide‐co‐N‐vinylpyrrolidone) (P(NAS‐co‐NVP)) of adjustable molecular weights and narrow polydispersities were prepared by nitroxide‐mediated polymerization (NMP) in N,N‐dimethylformamide in the presence of free SG1 (N‐tert‐butyl‐N‐1‐diethylphosphono‐(2,2‐dimethylpropyl) nitroxide), with MAMA‐SG1 (N‐(2‐methylpropyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐O‐(2‐carboxylprop‐2‐yl)hydroxylamine) alkoxyamine as initiator. The reactivity ratios of NAS and NVP were determined to be r_NAS = 0.12 and r_NVP = 0, indicating a strong alternating tendency for the P(NAS‐co‐NVP) copolymer. NAS/NVP copolymerization was then performed from a SG1‐functionalized poly(D ,L ‐lactide) (PLA‐SG1) macro‐alkoxyamine as initiator, leading to the corresponding PLA‐b‐P(NAS‐co‐NVP) block copolymer, with similar NAS and NVP reactivity ratios as mentioned above. The copolymer was used as a surface modifier for the PLA diafiltration and nanoprecipitation processes to achieve nanoparticles in the range of 450 and 150 nm, respectively. The presence of the functional/hydrophilic P(NAS‐co‐NVP) block, and particularly the N‐succinimidyl (NS) ester moieties at the particle surface, was evidenced by ethanolamine derivatization and zeta potential measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

An ambient self‐curable latex based on colloidal dispersions in water of two functionalized polymers and the thermally reversible crosslinked films generated

An ambient self‐curable latex (ASCL) was prepared by mixing colloidal dispersions in water of a chloromethylstyrene (CMS)‐functionalized polymer and a tertiary‐amine‐functionalized polymer. The two dispersions were obtained via the conventional emulsion copolymerization of CMS and 2‐(dimethylamino)ethylacrylate (DMAEA), respectively, with styrene (St), butyl acrylate (BA), or both. No visible coagulation was observed either in the blends after 6 months of storage or after the latexes were introduced into aqueous media with pHs in the range of 3–11. Continuous, transparent, crosslinked elastic films with smooth surfaces were obtained via casting and drying the ASCL at room temperature, when one or both of the two functional polymer particles contained BA monomeric units. Thermocompression cycles; swelling experiments; solubility tests; and ¹H NMR, IR, DSC, and transmission electron microscopy tests were carried out to investigate the crosslinking and morphology of the films. The following observations were made: (1) the crosslinks in the films were generated via the Menschutkin reaction (quaternization) between the  CH₂‐Cl groups of the CMS containing particles and the amine groups of the DMAEA containing particles; (2) the crosslinked films were thermally remoldable due to reversible decrosslinking (dequaternization) on heating and recrosslinking (requaternization) on cooling; and (3) phase separation in the films was observed when one of the functional polymers (for instance, the nonpolar CMS‐St copolymer) was incompatible with the other one (for instance, the polar BA‐DMAEA copolymer). The present ASCL might be useful in producing water‐borne coatings and adhesives, elastic films, and functional membranes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 389–397, 2001     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐ 4‐yl)methyl methacrylate‐co‐styrene] by addition reaction of carbon dioxide and its compatibility with poly(methyl methacrylate) or poly(vinyl chloride)

We investigated the chemical fixation of carbon dioxide (CO ₂) to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer to polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl)methyl methacrylate‐co‐styrene] [poly(DOMA‐co‐St)] from the addition of CO ₂ to poly(glycidyl methacrylate‐co‐styrene) [poly(GMA‐co‐St)], quaternary ammonium salts showed good catalytic activity at mild reaction conditions. The CO ₂ addition reaction followed pseudo first‐order kinetics with the concentration of poly(GMA‐co‐St). In order to expand the applications of the CO ₂ fixed copolymer, polymer blends of this copolymer with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) were cast from N,N′‐dimethylformamide (DMF) solution. Miscibility of blends of poly(DOMA‐co‐St) with PMMA or PVC have been investigated both by differential scanning calorimetry (DSC) and visual inspection of the blends, and the blends were miscible over the whole composition ranges. The miscibility behaviors were also discussed in terms of FT‐IR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Radical ring‐opening copolymerization behavior of vinyloxirane: Synthesis of copolymer from 2‐isopropenyl‐3‐phenyloxirane and styrene and its functionalization

The radical ring‐opening copolymerization of 2‐isopropenyl‐3‐phenyloxirane (1) with styrene (St) was examined to obtain the copolymer [copoly(1‐St)] with a vinyl ether moiety in the main chain. The copolymers were obtained in moderate yields by copolymerization in various feed ratios of 1 and St over 120 °C; the number‐average molecular weights (M_n) were estimated to be 1800–4200 by gel permeation chromatography analysis. The ratio of the vinyl ether and St units of copoly(1‐St) was estimated with the ¹H NMR spectra and varied from 1/7 to 1/14 according to the initial feed ratio of 1 and St. The haloalkoxylation of copoly(1‐St) with ethylene glycol in the presence of N‐chlorosuccinimide produced a new copolymer with alcohol groups and chlorine atoms in the side group in a high yield. The M_n value of the haloalkoxylated polymer was almost the same as that of the starting copoly(1‐St). The incorporated halogen was determined by elemental analysis. The analytical result indicated that over 88% of the vinyl ether groups participated in the haloalkoxylation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3729–3735, 2000     

Photophysical and rheological properties of naphthalene-labeled cationic poly(dimethyl sulfate quaternized acrylamide/N,N-dimethylaminopropylmaleimide copolymer)

The synthesis, rheological, and fluorescence properties of a cationic water-soluble copolymer, naphthalene-labeled cationic poly(dimethyl sulfate quaternized acrylamide/N,N-dimethylaminopropylmaleimide copolymer), poly(DSQADMAPM)/NA, are reported. When fluorescent hydrophobes (naphthyl group) are incorporated into the cationic copolymer, the photophysical response may effectively probe solution behavior on the microscopic level. The salt and pH responsiveness inherent to the cationic copolymer systems is a function of ionic group type. Experimental results indicate that I_E/I_M increases steadily with increases in polymer concentration and I_E/I_M values for a given polymer concentration are higher in salt. At low pH values, I_E/I_M is high and excimer emission increases as the quaternary amino groups (R₄N⁺) are screened out. Dynamic light scattering (QELS) measurements indicate that diffusion coefficients of the cationic copolymer increase and the hydrodynamic diameters decrease with increasing salt concentration. Viscosity studies reveal that the polymer coil shrinks as salt is added. In fluorescence quenching study, the reduction in the quenching efficiency of thallium (Tl⁺) with salt addition can arise from enhanced compartmentalization of naphthalene labels as added electrolyte enhances intrapolymer micellization. The intrapolymer micelle is easily formed, indicating that the thallium ion has difficulty in reacting with bound naphthalenes located in the shrunk polymer coil. The cationic copolymer is depicted as an expanded polymer coil in deionized water because of intra- and interchain repulsions. Consequently, salt addition breaks down the repulsions and enhances intrapolymer micellization. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 11–19, 1998     

Characterization of complexation of PVP copolymer with DNA

Interactions of amphiphilic copolymer poly(N‐vinylpyrrolidone‐co‐N‐t‐Boc‐ tryptophanamido‐N′‐methacrylthiourea) [P(NVP‐co‐TrpAMT)] and poly(N‐vinylpyrrlidone) (PVP) with DNA were studied with the aim to understand the difference in their complexation efficiencies when considered as a potential non‐viral delivery vector. Fluorescence spectroscopy, ethidium bromide (EB) quenching, ζ potential measurement, and agarose gel electrophoresis were all carried out in Tris‐HCl (pH 7.4) solution to assess the degree of interaction between the (co)polymers P(NVP‐co‐TrpAMT) and DNA. All of these measurements show that the high affinity of the copolymer for DNA can be demonstrated. We also found that P(NVP‐co‐TrpAMT)‐I (PVP/PTrpAMT molar ratio was 100:2.88) exhibited a high DNA cleavage activity and induced the supercoiled form of the plasmid cleavage in the nicked and linear forms. Moreover, P(NVP‐co‐TrpAMT)‐I exhibited stronger affinity for DNA than PVP and P(NVP‐co‐TrpAMT)‐II (PVP/PTrpAMT molar ratio of 100:6.35). This phenomenon is believed to be related to the structure of TrpAMT and the hydrophobic nature of the copolymer. P(NVP‐co‐TrpAMT)‐II with higher hydrophobic segments creates a strong hydrophobic interaction and induces a steric barrier which hinders their complexation with DNA. The study reveals important information about the inner mechanisms involved in the interaction of the PVP copolymer with DNA, which aids in the design of novel efficient non‐ionic gene carriers. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermosensitive polymer brush‐supported 4‐N,N‐dialkylaminopyridine on silica particles as catalyst for hydrolysis of an activated ester in aqueous buffers: Comparison of activity with linear polymer‐supported version and effect of LCST transition

We report on the synthesis of a thermosensitive polymer brush‐supported 4‐N,N‐dialkylaminopyridine catalyst and the comparison of its catalytic activity with the corresponding linear polymer‐supported version in the hydrolysis of p‐nitrophenyl acetate (NPA) as well as the effect of lower critical solution temperature (LCST) transition on catalytic activity. The polymer brushes were synthesized from initiator‐functionalized silica particles by surface‐initiated atom transfer radical polymerization of methoxytri(ethylene glycol) methacrylate and 2‐(N‐methyl‐N‐(4‐pyridyl)amino)ethyl methacrylate in the presence of a free initiator. Dynamic light scattering studies showed that the onset temperatures of the LCST transition of polymer brushes in pH 7.52 and 7.82 buffers were 42 and 38 °C, respectively. Under the same reaction conditions, the net initial rate of the hydrolysis of NPA catalyzed by hairy particles was 70–80% of that catalyzed by the free copolymer at the temperature below the LCST of polymer brushes. With further increasing the temperature above the LCST, the plot of logarithm of net initial rate versus inverse temperature exhibited a shift for the reactions catalyzed by hairy particles and leveled off or decreased slightly in the case of using the free copolymer as catalyst, presumably because the structures of the aggregates of hairy particles and free copolymer chains were different. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2853–2870, 2009     

Synthesis and functionalities of poly(N‐vinylalkylamide). XII. Synthesis and thermosensitive property of poly(vinylamine) copolymer prepared from poly(N‐vinylformamide‐co‐N‐vinylisobutyramide)

The differences in the polymerization abilities of N‐vinylformamide (NVF) and N‐vinylisobutyramide (NVIBA) and the synthesis of their copolymers were studied. The polymerization abilities were fairly good and quite similar to those of N‐vinyl‐ acetamide (NVA), a monomer in the same class as N‐vinylalkylamides. Since the monomer reactivity ratios were r₁ = 1.08 and r₂ = 0.92 (M₁ = NVF, M₂ = NVIBA), respectively, it is clear that the comonomers definitely were converted to random copolymers. The resulting copolymers poly(NVF‐co‐NVIBA) exhibited the cloud points sharply. The light transmittance profiles were the same as those for poly(NVIBA) although they increased from 39 °C for poly(NVIBA), with an increase in the corresponding hydrophilic NVF component. Our final objective was to produce a cloud point controlled polymer material with primary amino groups. To achieve this, we examined the hydrolysis of poly(NVF), poly(NVA), poly(NVIBA), and poly(NVF‐co‐NVIBA) to obtain poly(vinylamine) [poly(VAm)]. The hydrolytic cleavage of poly(NVF) and poly(NVA) was promoted by an increase in temperature. However, poly(NVIBA) was not cleaved appreciably. The hydrolysis of poly(NVF‐co‐NVIBA) was done under controlled conditions, and amino groups selectively were introduced to only one of two components of the copolymer. The cloud point of the hydrolyzed copolymer shifted to a higher temperature than that of the copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3674–3681, 2000     

Preparation of Quaternary Amphiphilic Block Copolymer PMA-b-P (NVP/MAH/St) and Its Application in Surface Modification of Aluminum Nitride Powders

Poly(methyl acrylate)-b-poly(N-vinyl pyrrolidone/maleic anhydride/styrene) (PMA-b-P (NVP/MAH/St)) quaternary amphiphilic block copolymer prepared by reversible addition-fragmentation chain transfer (RAFT) was used to improve the anti-hydrolysis and dispersion properties of aluminum nitride (AIN) powders that were modified by copolymers. Its structure was characterized by Fourier transform infrared spectroscopy (FT-IR) and Hydrogen nuclear magnetic spectroscopy (¹H-NMR). The results demonstrate that the molecular weight distribution of the quaternary amphiphilic block copolymers is 1.35–1.60, which is characteristic of controlled molecular weight and narrow molecular weight distribution. Through charge transfer complexes, NVP/MAH/St produces a regular alternating arrangement structure. After being treated with micro-crosslinking, AlN powder modified by copolymer PMA-b-P(NVP/MAH/St) exhibits outstanding resistance to hydrolysis and can be stabilized in hot water at 50 °C for more than 14 h, and the agglomeration of powder particles was improved remarkably.     

Single‐chain nanoparticles with well‐defined structure via intramolecular crosslinking of linear polymers with pendant benzoxazine groups

Controlled intramolecular collapse of linear polymer chains with crosslinkable groups is an efficient way to prepare single‐chain nanoparticles in the size range of 5–20 nm. However, the nature of the crosslinking group is critical. In present study, poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMS)] was synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and then was converted into polystyrene azide (PS? N₃). Polystyrene containing benzoxazine side groups [P(St‐co‐BS)], which can be used as the precusor for the later intramolecular collapse, was obtained from PS? N₃ and 3‐(4‐(prop‐2‐ynyloxy)phenyl)‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazine (P‐APPE) via the method of click chemistry. The sub‐20 nm polymeric nanoparticles with well‐defined structure via thermally intramolecular crosslinking of P(St‐co‐BS) were prepared. The structure change from the linear polymers to the single‐chain nanoparticles was confirmed by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The morphology and the dimension of the nanoparticles were characterized by using transmission electron microscope (TEM), atomic force microscopy (AFM), as well as dynamic light scattering (DLS). The results reveal that the size of the nanoparticles can be regulated by changing the molecular weight of the precursors and the amount of pendant benzoxazine groups by the use of controlled polymerization techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photocaged pendent thiol polymer brush surfaces for postpolymerization modifications via thiol‐click chemistry

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o‐nitrobenzyl and p‐methoxyphenacyl thioethers. Poly(2‐hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface‐initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3‐(2‐nitrobenzylthio)propanoic acid or 3‐(2‐(4‐methoxyphenyl)‐2‐oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol‐mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Quantification of ATRP initiator density on polymer latex particles by fluorescence labeling technique using copper‐catalyzed azide‐alkyne cycloaddition

We developed a novel fluorescence labeling technique for quantification of surface densities of atom transfer radical polymerization (ATRP) initiators on polymer particles. The cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) polymer latex particles carrying ATRP‐initiating chlorine groups were prepared by emulsifier‐free emulsion polymerization of styrene (St), 2‐(2‐chloropropionyloxy)ethyl methacrylate (CPEM), and N‐n‐butyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonium bromide (C₄DMAEMA). ATRP initiators on the surface of polymer particles were converted into azide groups by sodium azide, followed by fluorescent labeling with 5‐(N,N‐dimethylamino)‐N′‐(prop‐2‐yn‐1‐yl)naphthalene‐1‐sulfonamide (Dansyl‐alkyne) by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). The reaction time required for both azidation of ATRP‐initiating groups and successive fluorescence labeling of azide groups with Dansyl‐alkyne by CuAAC were investigated in detail by FTIR and fluorescence spectral measurement, respectively. The ATRP initiator densities on the cationic P(St‐CPEM‐C₄DMAEMA) and anionic P(St‐CPEM) particle surfaces were estimated to be 0.21 and 0.15 molecules nm^?2, respectively, which gave close agreement with values previously determined by a conductometric titration method. The fluorescence labeling through click chemistry proposed herein is a versatile technique to quantify the surface ATRP initiator density both on anionic and cationic polymer particles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4042–4051     

RAFT synthesis of an amphiphilic block copolymer bearing chlorin rings in the hydrophobic segment and its application in photodynamic therapy

RAFT polymerization of styrene (St) in the presence of 5,10,15,20‐tetrakis(pentafluorophenyl)porphyrin (TFPP) was conducted using 4‐cyano‐4‐(thiobenzoyl)thiopentanoic acid as a chain‐transfer agent and azobisisobutyronitrile as an initiator at 60 °C. The resulting polymer exhibited a chlorin‐like UV‐vis spectrum, which indicated that the polymer possessed a reduced TFPP structure. Furthermore, an SEC trace recorded using UV‐vis detector (λ = 410 nm), which selectively detected the TFPP‐incorporated polymer, shifted toward higher molecular mass as the polymerization progressed. This evidence indicated that TFPP acted as a vinylene‐type monomer, such as maleimide, to form a copolymer, namely, poly(St‐co‐TFPP). The mole fraction of TFPP units was estimated to be 0.74 × 10^?3, which was close to that in the feed (1 × 10^?3). Chain extension of poly(St‐co‐TFPP) with polyethylene glycol monomethyl ether acrylate (PEGA) was performed to afford the amphiphilic block copolymer poly(St‐co‐TFPP)‐b‐poly(PEGA). The degrees of polymerization of St and PEGA were determined to be 64 and 75, respectively. Poly(St‐co‐TFPP)‐b‐poly(PEGA) formed micelles following dialysis. The median diameter of the micelles in solution was determined to be 16 nm by DLS. The photocytotoxicity of the micelle solution was evaluated in a human glioblastoma cell line (U251) and an N‐methyl‐N'‐nitro‐N‐nitrosoguanidine‐induced mutant of a rat murine RGM‐1 gastric carcinoma mucosal cell line (RGK‐1). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3395–3403     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

Organizing thermodynamic data obtained from multicomponent polymer electrolytes: Salt‐containing polymer blends and block copolymers

The objective of this review is to organize literature data on the thermodynamic properties of salt‐containing polystyrene/poly(ethylene oxide) (PS/PEO) blends and polystyrene‐b‐poly(ethylene oxide) (SEO) diblock copolymers. These systems are of interest due to their potential to serve as electrolytes in all‐solid rechargeable lithium batteries. Mean‐field theories, developed for pure polymer blends and block copolymers, are used to describe phenomenon seen in salt‐containing systems. An effective Flory–Huggins interaction parameter, χ_eff , that increases linearly with salt concentration is used to describe the effect of salt addition for both blends and block copolymers. Segregation strength, χ_effN , where N is the chain length of the homopolymers or block copolymers, is used to map phase behavior of salty systems as a function of composition. Domain spacing of salt‐containing block copolymers is normalized to account for the effect of copolymer composition using an expression obtained in the weak segregation limit. The phase behavior of salty blends, salty block copolymers, and domain spacings of the latter systems, are presented as a function of chain length, composition and salt concentration on universal plots. While the proposed framework has limitations, the universal plots should serve as a starting point for organizing data from other salt‐containing polymer mixtures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1177–1187     

Free-radical copolymerization of styrene with N-phenyl maleimide initiated by thiol

2-Methyl–2-undecanethiol was found efficient to initiate the free-radical copolymerization of styrene (St) with N-phenyl maleimide (NPMI) at 40°C. The initial copolymerization rate increases with the increasing of thiol concentration at first, then keeps constant with the further increasing of the thiol concentration. The charge-transfer complex (CTC) formed between St and NPMI was investigated in different solvents by using ¹H-NMR. There is no definite correlation between CTC equilibrium constant, K, and the polarity of the solvent. With the increasing of CTC concentration, both the copolymerization rate and NPMI content in copolymer enhances, indicating the participation of CTC in both initiation and propagation. The monomer reactivity ratios were calculated to be r_NPMI = 0.052 and r_St ? 0.166, showing an alternating tendency for the copolymerization of St with NPMI. The molecular weight approach has shown again the effect of CTC. The function of thiol as a regulator is mitigated due to the involvement of CTC. © 1992 John Wiley & Sons, Inc.     

Synthesis of star polymer by atom transfer radical polymerization with resorcinol‐core multifunctional initiator: The construction of nanocapsule via hydrolysis and olefin metathesis reaction of the obtained star polymer

Olefin group‐carrying styrene, 1‐but‐3‐enyl‐4‐vinylbenznene (BVB), was polymerized via atom transfer radical polymerization (ATRP) initiated from C‐methylcalix [4]resorcinarene‐based multifunctional initiator (CRA‐bib) at low conversion to produce star polymer [poly(BVB)] with narrow molecular weight distribution (M_w/M_n < 1.35). The copolymerization of styrene (St) with poly(BVB) (M_n = 11,000, M_w/M_n = 1.23) as a macroinitiator afforded star block copolymer [poly(BVB‐b‐St)] with M_n = 35,000 and M_w/M_n = 1.44. The BVB layer of poly(BVB‐b‐St), located between the St shell and the CRA core, was crosslinked by olefin metathesis reaction of olefin groups o the BVB moieties. The removal of the CRA core of the crosslinked poly(BVB‐b‐St) by hydrolysis using KOH as a base gave polymeric hollow sphere [poly(cored crossBVB‐b‐St)] with good solubility in organic solvents. The morphological structure of the poly(cored crossBVB‐b‐St) showed spherical aggregates in THF by scanning electron microscopy (SEM). Furthermore, the nanocapsule structure of poly(cored crossBVB‐b‐St) with hollow spheres was found to be observed by transmission electron microscopy (TEM). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4879–4888, 2008     

Polymers Bearing an S‐Sulfate Side Chain. Oxidative Crosslinking of the Copolymer of Vinyl Mercaptoacetate S‐Sulfate and 2‐Hydroxyethyl Acrylate

Vinyl mercaptoacetate S‐sulfate sodium salt (VMAS) was prepared with a yield of 74% from a reaction of vinyl chloroacetate and sodium thiosulfate. Polymerization of VMAS with 2‐hydroxyethyl acrylate (HEA) in the presence of ammonium persulfate and N,N,N ′,N ′‐tetramethylethylenediamine afforded a colorless copolymer bearing the S—SO₃^– Na⁺ group in 3.2–4.3 mol‐% and having a MW of 2.4–13×10⁴. The polymer was water‐soluble but, upon treatment with an oxidizing agent, was transformed quickly into a water‐tolerant material. It again became water‐soluble on the addition of a reducing agent. The unique solubility alternation was explained by the formation and fission of S—S bond crosslinking in the polymer.     

Smart photoluminescent nanohybrids based on CdSe quantum dots capped with multidentate thiolated pH‐responsive and thermoresponsive polymers for nanosensing

Well‐defined thermoresponsive polymers obtained by the atom transfer radical polymerization (ATRP) of short oligo(ethylene glycol) methyl ether methacrylates (MEO_nMA, n = 2, 3, or 8) with small ratios of a thiolated comonomer, 2‐(acetylthio)ethylmethacrytale, can replace the hydrophobic trioctylphosphine oxide (TOPO) capping of CdSe quantum dots (QDs). After this facile ligand exchange, the mild hydrolysis of the acetylthiol group into thiol is the key to enhance the QD luminescence. However, the length of the ethylene glycol side chain is critical for the success of the functionalization; it is established that the shortest MEO₂MA‐based copolymers result in a compact coating and a highest quantum yield (up to a factor of 6) when compared with that of CdSe@TOPO in dichloromethane. In addition, the amphiphilic character of the copolymer allows the CdSe@P(MEO_nMA‐co‐SEMA) nanohybrids to disperse in water. On the other hand, the residual ionizable thiol groups do not get attached to the QD surface, cause that the lower critical solubility temperature of the polymer depends on pH as well. Thus, at acidic pH, an abrupt increase in the luminescence emission accompanies the polymer collapse, which establishes the promise of these hybrids as temperature/pH nanosensors and targeted drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3087–3095     

Synthesis and reversible hydration–dehydration system of copolymers bearing a vicinal tricarbonyl structure

Novel copolymers composed of a styrene (St) derivative bearing a vicinal tricarbonyl moiety and various vinyl monomers such as St, methyl methacrylate (MMA), and N‐vinylpyrrolidone (NVP) were synthesized by (1) radical copolymerization of a St derivative with a 1,3‐diketone structure with St, MMA, and NVP and (2) successive oxidation of the resulting copolymers with N‐bromosuccinimide in DMSO to convert their 1,3‐diketone moieties in the side chains into the corresponding vicinal tricarbonyl moieties. Their tricarbonyl moieties were readily hydrated in water‐containing acetone to generate the corresponding copolymers bearing geminal diol structures in the side chains. On the other hand, heating the resulting copolymers bearing the geminal diol structures in vacuo‐enabled successful recovery of the vicinal tricarbonyl moieties to demonstrate the reversible nature of this system. The hydration behavior in powdery state under air atmosphere saturated by water was also investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012