高强度聚(R-3-羟基丁酸酯-co-R-3-羟基己酸酯)纤维的制备及其力学性能的调节

通过优化聚(R-3-羟基丁酸酯-co-R-3-羟基己酸酯)(PHBHHx)原纤维的制备工艺,采用较低的挤出温度,极大加快了原纤维的结晶速率,缩短了后续加工所需时间.随后通过“等温结晶-拉伸-固定长度退火”的方法制备了力学性能优异的PHBHHx纤维,纤维平均拉伸强度达262 MPa,断裂伸长率大于120％.利用二维X射线衍射和拉曼光谱研究了纤维的晶体结构,结果表明高强度的PHBHHx纤维中晶区和非晶区的分子链都具有很好的取向性,并且纤维中没有形成β晶结构.进一步研究发现通过改变退火工艺,可以很方便地调节纤维的力学性能,使得PHBHHx材料可以广泛应用于不同的领域.     

聚(3-羟基丁酸酯-co-3-羟基戊酸酯)中β晶的形成与转变

本文通过同步辐射原位二维广角X射线(2D-WAXD)和原位红外光谱(FTIR)等手段，对聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)预取向膜二次拉伸过程及随后升温过程中的结构演化机制进行了系统研究。研究结果表明，二次拉伸过程中β晶的相对含量、取向程度和晶粒尺寸会随应变而升高；同时，体系的总α晶的取向度和晶粒尺寸变小，结晶度下降。这说明拉伸过程中，α晶会被破坏并转变为β晶。经过二次拉伸的PHBV膜，在升温过程中，α晶的取向、晶粒尺寸及总体结晶度会升高，而β晶的相对含量逐步下降到零。这说明在较高的温度下，β晶的分子链会重新排列，主要转变成了取向度高的α晶。β晶表现出从65℃到135℃的持续熔融转变。本研究初步阐释了PHBV薄膜中的β晶在拉伸和升温过程中的演化机制，为生物基聚酯薄膜的加工和性能调控提供了理论依据。     

α-取代硝基乙酸苯酯与醌酯类化合物的串联反应构建3-取代-3-硝基苯并呋喃酮类化合物

在5 mol%的氮甲基吗啉催化下，实现了α-取代硝基乙酸苯酯与醌酯类化合物的串联反应，快速、高效构建了一系列3-取代-3-硝基苯并呋喃酮类化合物。      

一维链状3-吡啶甲酸三苄基锡的合成和晶体结构

利用三苄基氯化锡和3-吡啶甲酸在三乙胺存在下以1:1摩尔比反应,合成了一维链状的有机锡配合物3-吡啶甲酸三苄基锡{(C7H7)3Sn(PyCO2H)2Sn(C7H7)3}。通过元素分析、红外光谱、核磁共振氢谱和X-射线单晶衍射对其结构进行了表征。测试结果表明:该配合物(C27H25- NO2Sn, Mr = 514.17)为单斜晶系,空间群P21/c, a = 10.618(6), b = 14.683(8), c = 16.050(9) ?β= 106.488(9)? Z = 4, V = 2399(2) ?, Dc = 1.423 g/cm3, ?= 1.087 mm-1, F(000) = 1040, R = 0.0266, wR = 0.0629。通过3-吡啶甲酸配体的氮原子桥联, 形成五配位三角双锥构型的链状结构。     

3-叠氮甲基-3-硝酸酯甲基环氧丁烷的聚合反应研究

改进了单体3-叠氮甲基-3-硝酸酯甲基环氧丁烷的合成路线,以三氟化硼·乙醚为催化剂,1,4-丁二醇为引发剂,研究了该含能单体的开环聚合反应,得到了分子量可预计、分散度较小的聚合物.采用FTIR、¹HNMR和GPC对聚合物结构进行了表征.     

Structure and Transesterification Reaction of Methyl 3-（Phenyldihalostannyl）propionates

The title compounds, PhX2SnCHECHECO2Me （X = C1, 1a; Br, 1b; I, 1c）, readily underwent transesterification into the corresponding analogues, PhX2SnCH2CH2CO2R when reacted with an alcohol ROH. The structural features of these compounds were described, and the possible mechanism of the novel transesterification was suggested.     

2-氧代-3-芳基-丁二酸酯的合成与表征

在复杂的天然产物合成和生物合成中,醇醛缩合反应是一类重要的碳-碳键形成反应.不对称催化直接Aldol反应由于其原子经济性,操作简捷,符合绿色化学的要求等,成为近年来不对称合成研究的热点之一.     

聚(3-羟基丁酸酯-co-3-羟基戊酸酯)改性及纤维成形北大核心CSCD

聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)是一种微生物发酵生产的热塑性聚合物。从物理、化学改性及其纤维成形两个方面综述了PHBV的研究进展。PHBV的物理改性主要有无机纳米粒子共混体系(PHBV/iNPs)、有机纳米晶共混体系(PHBV/oNPs)、高聚物共混体系(PHBV/Polymer)和绿色全降解共混体系;化学结构构筑主要包括接枝共聚改性、嵌段共聚改性、端基扩链改性等。从改性的手段及介质,分析了改性方法的优缺点。PHBV纤维的成形方法主要有熔融纺丝法、干法纺丝法及静电纺丝法。从PHBV纤维应用领域看,熔融纺纤维应用目标在于替代现有石油基相关产品,而静电纺纤维主要应用于开拓组织工程再生医学领域。最后,对PHBV今后的研究及发展提出了展望。     

THERMAL PROPERTY, MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF POLY（3-HYDROXYBUTYRATE-co- 3-YDROXYHEXANOATE） AND POLY（BUTYLENE SUCCINATE-ADIPATE） （PHBHHX/PBSA） BLENDS

Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.     

有机相中乙酸-α-氰基-3-苯氧基苄酯的含量与对映体过量值的测定

光学活性的(S)-乙酸-α-氰基-3-苯氧基苄酯(CPB乙酸酯)是生物农药拟除虫菊酯的重要中间体。研究CPB乙酸酯的合成反应动力学在理论上有重要意义,在实际生产中也可为提高该中间产物的产量提供理论指导。迄今用毛细管气相色谱法测定CPB乙酸酯的含量,尚未见报道。CPB乙酸酯具有立体选择性,为了探讨有机相中脂肪酶催化的该合成     

STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

β-羟基丁酸与β-羟基戊酸共聚物 (PHBV)/蒙脱土纳米复合材料的结构与性能

用溶液复合法成功地制备了插层型PHBV／蒙脱土纳米复合材料。采用X射线衍射（XRD）和透射电子显微镜（TEM）研究了复合材料的结构，硅酸盐片层间距从1.8nm升至2.4nm左右。同时研究了复合材料的结晶，熔融，动态力学行为和力学性能，发现有机蒙脱土的加入，可以加快PHBV的结晶,降低熔融温度，使基体的玻璃化转变温度升高，提高了材料的力学性能，有机蒙脱土含量在3％时，其综合性能最佳。     

β-羟基丁酸与β-羟基戊酸共聚物 (PHBV)/蒙脱土纳米复合材料的等温结晶动力学

用差热量热分析（DSC）方法研究了β－羟基丁酸与β－羟基戊酸共聚物（PHBV）／蒙脱土纳米复合材料的等温结晶行为。结果表明，PHBV的Avrami方程指数n、成核机理、结晶生长方式基本不受蒙脱土的影响，加入少量的蒙脱土可明显降低PHBV结晶成核自由能，使其结晶速率增大。     

A new hybrid nanocomposite prepared by graft copolymerization of butyl acrylate onto chitosan in the presence of organophilic montmorillonite

Organophilic montmorillonite (OMMT) was synthesized by cationic exchange between Na-MMT and tricetadecylmethyl ammonium bromide in an aqueous solution. A new nanocomposite consisting of poly(butyl acrylate)-modified chitosan and OMMT was prepared by γ-ray irradiation polymerization in acetic acid aqueous solution. The degree of dispersion and the intercalation spacing of these nanocomposites were investigated using X-ray diffraction. The enhanced thermal stabilities of nanocomposites were characterized by the thermal gravimetric analysis. The improved mechanical properties of nanocomposites were characterized by static tensile studies and dynamic mechanical analysis. The nanocomposites showed improved resistance to water absorption.     

熔融法制备EVA/OMMT纳米复合材料及其热性能和动态力学性能

熔融法制备EVA/OMMT纳米复合材料及其热性能和动态力学性能;乙烯-醋酸乙烯酯共聚物;蒙脱土;动态储能模量     

Novel nanocomposite based on EVA/PHBV/[60]Fullerene with improved thermal properties

A novel nanocomposite was prepared from ethylene-co-vinyl acetate copolymer (EVA) and poly-3-hydroxy butyrate-co-valerate (PHBV) in combination with small amounts of [60]Fullerene (C₆₀). The thermal degradation as well as the incorporation effect of C₆₀ on the thermo-oxidative decomposition of EVA/PHBV/C₆₀ nanocomposites was investigated using thermogravimetric analysis (TGA). In order to assess the level of stabilization of nanocomposites, the oxidation induction time test was also determined. The obtained results indicated that the dispersion of C₆₀ even at low loading (0.3, 0.5 and 0.7 wt.%) exerts a significant increase on the thermal stability properties of nanocomposite. The oxidation induction time values of nanocomposites were remarkably increased with the increase of C₆₀ amounts. Surprisingly, the oxidation induction time of EVA/PHBV/C₆₀ (0.3 wt.%) is 1643 s higher than that of unfilled EVA/PHBV blend.The flammability properties investigated in pyrolysis combustion flow calorimetry (PCFC) showed that the addition of C₆₀ could prolong the time to peak of Heat Release Rate (pHRR) of around 30 °C compared to EVA/PHBV blend. It was demonstrated that C₆₀ is inhibitor of the thermal and thermo-oxidative degradation of EVA/PHBV blend.     

漆酚钛聚合物/蒙脱土纳米复合材料的制备、结构与性能

用溶液插层聚合方法制备漆酚钛聚合物/蒙脱土纳米复合材料(PUTi/OMMT),并用XRD、TEM和TG等对其结构、性能进行测试与表征.XRD结果表明,通过溶液插层,PUTi分子链进入了OMMT片层间,从而使片层间距增大.TEM观察表明OMMT片层在PUTi聚合物中基本达到纳米级分散.与PUTi相比,PUTi/OMMT纳米复合材料具有更好的耐热性能和抗紫外光性能.     

Preparation,characterization and thermal behavior of poly(vinyl alcohol)/organic montmorillonite nanocomposites through solid-state shear pan-milling

In this study, the solid-state shear pan-milling was employed to prepare a series of polymer/layered silicate (PLS) nanocomposites. During the process of pan-milling at ambient temperature, poly(vinyl alcohol)/organic montmorillonite (PVA/OMMT) can be effectively pulverized, resulting in coexistence of intercalated and exfoliated OMMT layers. The obtained PLS nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). TEM analysis indicated that OMMT dispersed homogeneously in PVA matrix and XRD results illustrated that pan-milling had an obvious effect on increase in the interlayer spacing of OMMT, and resulted in coexistence of intercalated and exfoliated OMMT layers formed. Thermal gravimetric analysis showed that thermal stability of PVA was improved owing to the incorporation of OMMT. Thermal decomposition kinetics of PVA/OMMT nanocomposites with different milling cycles of OMMT was also studied. Two types of OMMT are chosen to compare the effect of hydrophilicity of OMMT on PVA/OMMT nanocomposites.     

Crystalline β‐structure of PHBV grown epitaxially on silicate layers of MMT

The poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/montmorillonite(MMT) nanocomposites were investigated by wide‐angle X‐ray scattering (WAXS). The aim of the investigation was solution intercalation of MMT with PHBV. Beside the usual orthorhombic unit cell, a stable pseudohexagonal β‐structure of PHBV was obtained. Well known β‐structure has one common WAXS reflection (d = 0.480 nm), which corresponds to the mean distance of PHBV chains in the pseudohexagonal structure. The new β‐structure has two diffraction peaks in the WAXS pattern. It is a three‐dimensionally ordered crystalline structure oriented in parallel with the silica layers of MMT. The new polymorphic form is supposed to be growing on the layers of MMT. Its layers serve as primary nucleation centers for epitaxial growth of the β‐structure. After annealing, this polymorphic form of PHBV disappears and it is transformed into the more stable α‐form leading to an enhanced total crystallinity of the polymer comprised in the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 751–755, 2009     

Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) plasticized by biodegradable soybean oils

The effects of soybean oil (SO) and epoxidized soybean oil(ESO) as biodegradable plasticizers for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied using thermal and mechanical analyses. PHBV/SO and PHBV/ESO blends were prepared by evaporating solvent from blend solutions. The levels of additive in the blend varied from 5% to 30%. As a plasticizer for PHBV, ESO was more effective than SO in depression of the glass transition temperature as well as in increasing the elongation at break and the impact strength of the films with increasing levels of additive. Biodegradation of the plasticized PHBV films was carried out by accelerated compost method. The degradation rates of the blend films with SO or ESO were found to be faster than that of PHBV film. From the thermogravimetric analysis, it was found that the thermal reaction between the epoxide groups of ESO and PHBV fragments with carboxylic chain ends, occurred during the degradation of PHBV/ESO blends.