Crystallization of In2O3 by vapor reaction

Crystallization of In₂O₃ occured in closed porcelain crucibles in air at 960–1200°C by vapor phase reaction of In₂O or In vapor with the oxygen diffusing into the system. The In₂O or In vapors were thermally generated from mixtures such as graphite/In₂O₃, graphite/In, In₂O₃/In and graphite/In₂O₃/In. The graphite/In₂O₃ system at a mole ratio of 30/1 and 1000°C produced yellow, transparent needle crystals with a maximum size of 0.5 X 0.5 X 8 mm and electrical resistivity of 5.5 X 10^-2 ω cm at 25°C.     

Catalytic growth of In2O3 nanobelts by vapor transport

Indium oxide (In₂O₃) nanobelts have been fabricated by thermal evaporation of metallic indium powders with the assistance of Au catalysts. The as-synthesized nanobelts are single-crystalline In₂O₃ with cubic structure, and usually tens of nanometers in thickness, tens to hundreds of nanometers in width, and several hundreds of micrometers in length. The room temperature photoluminescence spectrum of In₂O₃ nanobelts features a broad emission band at 620 nm, which could be attributed to oxygen deficiencies in the as-synthesized belts. The formation of In₂O₃ nanobelts follows a catalyst-assistant vapor—liquid–-solid growth mechanism, which enables the controlled growth of individual belts on predetermined sites.     

Effect of Al2O3 on phase separation and crystallization in ZnO---Al2O3---B2O3---SiO2 glasses

The effect of alumina on the phase separation and the crystallization of the glasses of composition (mol%) 18ZnO·30B₂O₃·52SiO₂ and O-40 Al₂O₃ was studied using an electron microscope and IR spectroscopy. The main crystalline phase appears in the microphase for which the compositions are not nearer to the crystal stoichiometry than the mean. The addition of Al₂O₃ suppresses the immiscibility but enhances the crystallizability.     

Raman spectrum studies of the glasses in the system Na2O---Al2O3---P2O5

Raman spectra of ternary sodium aluminosphosphate glasses indicate that for glasses with Al₂O₃/P₂O₅<0.63, the glass network is mainly built up of (PO₃)_n^n- chains and rings or different kinds of phosphate groups and AlO₄ tetrahedra; for glasses with Al₂O₃/P₂O₅>0.63, the glass network is mainly built up of AlPO₄ groups.     

Some characteristics of glass in the Al2O3---B2O3---SiO2 system from the gel

The colorless and transparent glasses in the Al₂O₃---B₂O₃---SiO₃ system with high B₂O₃ and SiO₂ content were prepared from gels at low temperature. Their IR spectra not only revealed the evolution of the gel to glass conversion, but also showed that the formation of mixed bonds in the glasses obtained did not show any effect due to the B₂O₃ content. The accuracy of the glass composition is dependent upon the SiO₂/B₂O₃ molar ratio. The higher the ratio, the less the deviation of the analyzed compositions of the resulting glasses from their original calculated values. It is obvious that the higher the ratio, the lower the thermal expansion coefficient and the higher the transformation temperature of the glass, and the temperature at which the thermal contraction reaches an equilibrium is higher.     

Glass formation, properties and structure of glasses in the P2O5---WO3---K2O---Al2O3 system

Glass formation in the P₂O₅---WO₃---K₂O---Al₂O₃ system was investigated and the glass-forming regions are presented.

the properties of the glasses in the P₂O₅---WO₃---K₂O---Al₂O₃ system (Al₂O₃ 8 mol.%) are reported.

The colouration of glass was studied. It was found that W⁵⁺ ions make glass blue.

Infrared spectra were measured by means of making KBr pills. Results of the investigation suggest that P---O---P, P---O---W, and W---O---W bonds form a continuous network in the phosphate glasses. So we suggest that tungsten trioxide is a glass former.     

Al2O3-TiO2 and Al2TiO5 ceramic materials by the sol-gel process

Ceramic materials with a very low thermal expansion coefficient are synthesized by the sol-gel process. The binary gel is obtained by hydrolysis and polycondensation reactions of organometallic compounds of aluminium and titanium. The thermal evolution of the amorphous powder is followed by DTA and TGA measurements. Structural evolution is followed using X-ray diffraction. The crystallization of the TiO₂ rutile and Al₂O₃ corindon starts at 700 and 900°C respectively. The transformation of Al₂O₃ and TiO₂ into Al₂TiO₅ appears between 1200 and 1300°C. The densification of the powder is performed by the hot pressing process. The shrinkage of the powder was previously followed by dilatometric measurements. The physical properties of the final material are studied as a function of pressing parameters.     

Glass formation and crystallization in the ZrO2---Al2O3---P2O5 system

The glass formation of the ZrO₂---Al₂O₃---P₂O₅ system in the high phosphate region is determined. The crystallization process and the crystal types formed during heat treatment have been studied. The structure of these glasses is discussed.     

Toughened glass-ceramics containing ZrO2 and Al2O3 prepared by the sol-gel process from metal alkoxides

Glasses of compositions 5ZrO₂·5SiO₂(ZS), 5ZrO₂·Al₂O₃·4SiO₂(ZAS) and 5 5ZrO₂·0.5Al₂O₃·0.5Na₂O·4SiO₂(ZANS) were prepared by the sol-gel process from metal alkoxides and sintered to make glass-ceramics. Tetragonal ZrO₂ was precipitated by heat treatment at 900 to 1300°C. The activation energy for tetragonal ZrO₂ crystal growth was extremely high in Al₂O₃ containing glasses. ZAS and ZS were sintered to the near theoretical densities above 1200°C, at which the predominant phase was tetragonal ZrO₂. On the other hand, for ZANS, high densification was not attained owing to the large pores enclosed by the glass phase. Strength and fracture toughness increased with the densification and the crystal growth of tetragonal ZrO₂, reaching 450 MPa and 9 MN/m^1.5, respectively.     

Study of electrical properties of MoO3–Fe2O3–P2O5 and SrO–Fe2O3–P2O5 glasses by impedance spectroscopy. II

The electrical and dielectric properties for three series of MoO₃–Fe₂O₃–P₂O₅ and one series of SrO–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 3 MHz and over the temperature range from 303 to 473 K. It was shown in Part I that the MoO₃ is incorporated into phosphate network and the structure/properties are strongly influenced by the overall O/P ratio. The Fe₂O₃ content and Fe(II)/Fe_tot ratio in these glasses have significant effects on the electrical conductivity and dielectric permittivity. With decreasing Fe₂O₃ content in MoO₃–Fe₂O₃–P₂O₅ glasses with O/P at 3.5 the dc conductivity, σ_dc(ω) decreases for two orders of magnitude, which indicates that the conductivity for these glasses depends on Fe₂O₃ and is independent of the MoO₃ content. Also, the dielectric properties such as ^′(ω), ^″(ω) and σ_ac(ω) and their variation with frequency and temperature indicates a decrease in relaxation intensity with increase in the concentration of MoO₃. On the other hand, the dc conductivity for MoO₃–Fe₂O₃–P₂O₅ glasses with O/P > 3.5 increases with the substitution of MoO₃ which has been explained by an increase in the number of non-bridging oxygens and formation of Fe–O–P bonds that are responsible for formation of small polarons. The increase in the dielectric permittivity, ^′(ω) with increasing MoO₃ content is attributed to the increase in the deformation of glass network with increasing bonding defects. For SrO–Fe₂O₃–P₂O₅ glasses the conductivity and dielectric permittivity remained constant with increasing SrO.     

Electrical characteristics of materials in the BaO---Fe2O3---B2O3 system

Structural peculiarities, as for example segregation and crystallization in vitroceramic materials, may have a significant influence on the electrical volume resistance of materials. Interesting characteristics can be detected in the case of the system BaO---Fe₂O₃---B₂O₃. This paper presents results showing that very different conductivity behaviours can be obtained by a suitable modification of the composition of the materials and by heat treatment.     

Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould

The preparation of glass-lined coating mould from gels in the ternary system of SiO₂–ZrO₂–B₂O₃ has been investigated. The crystallization characterization and high temperature structure stability of this coating mould are demonstrated. We can find that the crystallization of t-ZrO₂ as well as the tetragonal to monoclinic phase transformation are, respectively, retarded and impeded owing to the encasement of SiO₂ matrix. While the inhibitive effect of B₂O₃ on crystallization of the SiO₂–ZrO₂–B₂O₃ coating mould is explained. Finally, DD3 single crystal superalloy melt can realize highly undercooled rapid solidification by adopting this coating mould, which further evinces that SiO₂–ZrO₂–B₂O₃ coating mould has an ideal nucleation inhibition for superalloy.     

Phase relations around langasite (La3Ga5SiO14) in the system La2O3–Ga2O3–SiO2 in air

Phase relations around langasite (LGS, La₃Ga₅SiO₁₄) were studied on the basis of phase assemblage observed during calcination and crystallization process of samples of various compositions in the ternary system La₂O₃–Ga₂O₃–SiO₂. A ternary compound of apatite structure, La₁₄Ga_xSi_9–xO_39–x/2 was found for the first time. Crystallization of this compound was observed in the cooling process of molten samples of stoichiometric LGS as well as LGS single crystal, demonstrating that LGS is an incongruent-melting compound. A phase diagram was established primarily based on the crystallization sequence in the cooling process.     

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

The surface morphology of Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond with and without calcium oxide was studied by soaking vitrified bonded microcrystalline alumina composites in water. The content of water introduced to the vitrified bond was determined by thermal gravity analysis, and the effects of water and calcium on the phase separation and nucleation of the vitrified bond were investigated using scanning electron microscope and energy-dispersive X-ray spectrometer. Soaked in water for 72 h, the Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond presented a porous surface, and its bending strength declined with increasing sintering temperature. However, the Na₂O–CaO–B₂O₃–Al₂O₃–SiO₂ vitrified bond was more durable against aqueous coolant even needle-shape crystals were found clustered on the surface of the vitrified bond. The crystals were enriched with aluminosilicate tested by energy-dispersive X-ray spectrums. The appearance of crystals lessened the dissolution of the vitrified bond and made the bending strength increase in the sintering temperature region between 870 °C and 930 °C.     

Characterisation of semiconducting V2O5–Bi2O3–TeO2 glasses through ultrasonic measurements

Tellurite containing vanadate (50−x)V₂O₅–xBi₂O₃–50TeO₂ glasses with different bismuth (x=0, 5, 10, 15, 20 and 25 wt%) contents have been prepared by rapid quenching method. Ultrasonic velocities (both longitudinal and shear) and attenuation (for longitudinal waves only) measurements have been made using a transducer operated at the fundamental frequency of 5 MHz in the temperature range from 150 to 480 K. The elastic moduli, Debye temperature, and Poisson’s ratio have been obtained both as a function of temperature and Bi₂O₃ content. The room temperature study on ultrasonic velocities, attenuation, elastic moduli, Poisson’s ratio, Debye temperature and glass transition temperature show the absence of any anomalies with addition of Bi₂O₃ content. The observed results confirm that the addition of Bi₂O₃ modifier changes the rigid formula character of TeO₂ to a matrix of regular TeO₃ and ionic behaviour bonds (NBOs). A monotonic decrease in velocities and elastic moduli, and an increase in attenuation and acoustic loss as a function of temperature in all the glass samples reveal the loose packing structure, which is attributed to the instability of TeO₄ trigonal bipyramid units in the network as temperature increases. It is also inferred that the glasses with low Bi₂O₃ content are more stable than with high Bi₂O₃ content.     

B NMR investigations in xV2O5–B2O3 and xV2O5–B2O3–PbO glasses

11B (I=3/2) MAS NMR in the binary glass system xV₂O₅–B₂O₃ (x=0.053, 0.43) and the ternary glass system xV₂O₅–B₂O₃–PbO (0.1x1.5) has been investigated at room temperature. In the xV₂O₅–B₂O₃ glasses, one NMR line due to BO₃ unit was observed. Meanwhile in the xV₂O₅–B₂O₃–PbO, two NMR lines which arise from BO₃ and BO₄ units were detected, where the appearance of BO₄ units is produced by the presence of PbO. From the computer-simulation of the ¹¹B NMR central transition line (m=−1/2↔1/2), the quadrupole parameters (e²qQ/h and η) for BO₃ units in xV₂O₅–B₂O₃, and those for BO₃ and BO₄ units in xV₂O₅–B₂O₃–PbO were obtained as a function of x. As the V₂O₅ content increases in xV₂O₅–B₂O₃–PbO, the e²qQ/h and η values of the BO₃⁻ associated resonance are found to slightly decrease and increase, respectively. Meanwhile, the e²qQ/h and η values of BO₄⁻ associated resonance in xV₂O₅–B₂O₃–PbO are found to slightly increase and decrease, respectively. By comparing the intensities of the total transitions (m=−3/2↔−1/2,m=−1/2↔1/2, and 1/2↔3/2) for the ¹¹B NMR line of BO₃ and BO₄ units contained in xV₂O₅–B₂O₃–PbO with those of respective standard samples of 0.053V₂O₅–B₂O₃ and NaBH₄, the quantitative fractions of BO₃ and BO₄ in xV₂O₅–B₂O₃–PbO were obtained as a function of x.     

Chemical strengthening of Na2O---Al2O3---SiO2 system glasses by surface controlled crystallization

Appropriate glass compositions of the Na₂O---Al₂O₃---SiO₂ system and glass melting technology were investigated. The dependence of some factors, such as composition of molten salts, time and temperature of ion exchange treatment on the modulus of rupture was studied. As expected, the coefficient of interdiffusion is a function of concentration and has the mixed-alkali effect. The order of the interdiffusion coefficient is 10⁻⁶ cm²/s. The effect of binary and ternary salt baths on the surface controlled crystallization was reported. The experimental data showed that there is a series of technological advantages from applying molten salts of the ternary system Li₂SO₄---Na₂SO₄---K₂SO₄ in comparison with the binary system Li₂SO₄---Na₂SO₄.     

Migration of Cu ions in Cu2O---Al2O3---SiO2 glasses on heating in air

The behavior of copper ions in the Cu₂O·Al₂O₃·4SiO₂ (in moles) glass on heating in air at temperatures up to 500°C was studied. When the glass, in which about 90% of Cu was present as Cu⁺ ions, was heated in air above 300°C, a CuO layer was formed on the surface. The amount of CuO was increased with heating temperature and time, corresponding to the decrease in weight of the glass. Furthermore, the fraction of Cu²⁺ ions in the glass increased. These observations suggest that oxygens do not diffuse into the glass, but Cu⁺ ions migrate to the surface from the interior to balance the surplus positive charge produced by the oxidation of Cu⁺ to Cu²⁺ ions inside the glass. The following reaction scheme for the formation of the CuO layer was proposed; 2Cu⁺(interior) + ₂¹O₂(surface) → Cu²⁺(interior) + CuO(surface).     

Optical absorption and elastic properties of Li2O---(LiCl)2---B2O3---Al2O3 glasses

Ultraviolet transmission, densities, and supersonic velocities of the Li₂O---(LiCl)₂---B₂O₃---Al₂O₃ glasses were measured. Adiabatic compressibilities of all these glasses were calculated. The results were interpreted from the viewpoint of the glass structure.     

Crystal growth of NdAl3(BO3)4 from K2O/MoO3/Nd2O3/B2O3/KF flux

NdAl₃(BO₃)₄ single crystals were grown by the flux method and the TSSG technique using a K₂O/3MoO₃/B₂O₃/0.5Nd₂O₃/KF flux system. Light-violet clear crystals could be obtained. The effects of fluoride on the growth of NAB crystals were investigated. As the content of KF was gradually increased, the growth form of NAB was changed from the equant to the columnar and the primary crystalline region of NAB was shrinked. At the ratio of KF/K₂O = 0.75, NAB crystals could not be grown.