Characterisation of semiconducting V2O5–Bi2O3–TeO2 glasses through ultrasonic measurements

Tellurite containing vanadate (50−x)V₂O₅–xBi₂O₃–50TeO₂ glasses with different bismuth (x=0, 5, 10, 15, 20 and 25 wt%) contents have been prepared by rapid quenching method. Ultrasonic velocities (both longitudinal and shear) and attenuation (for longitudinal waves only) measurements have been made using a transducer operated at the fundamental frequency of 5 MHz in the temperature range from 150 to 480 K. The elastic moduli, Debye temperature, and Poisson’s ratio have been obtained both as a function of temperature and Bi₂O₃ content. The room temperature study on ultrasonic velocities, attenuation, elastic moduli, Poisson’s ratio, Debye temperature and glass transition temperature show the absence of any anomalies with addition of Bi₂O₃ content. The observed results confirm that the addition of Bi₂O₃ modifier changes the rigid formula character of TeO₂ to a matrix of regular TeO₃ and ionic behaviour bonds (NBOs). A monotonic decrease in velocities and elastic moduli, and an increase in attenuation and acoustic loss as a function of temperature in all the glass samples reveal the loose packing structure, which is attributed to the instability of TeO₄ trigonal bipyramid units in the network as temperature increases. It is also inferred that the glasses with low Bi₂O₃ content are more stable than with high Bi₂O₃ content.     

Solidification of superalloy in a SiO2–ZrO2–B2O3 coating mould

The preparation of glass-lined coating mould from gels in the ternary system of SiO₂–ZrO₂–B₂O₃ has been investigated. The crystallization characterization and high temperature structure stability of this coating mould are demonstrated. We can find that the crystallization of t-ZrO₂ as well as the tetragonal to monoclinic phase transformation are, respectively, retarded and impeded owing to the encasement of SiO₂ matrix. While the inhibitive effect of B₂O₃ on crystallization of the SiO₂–ZrO₂–B₂O₃ coating mould is explained. Finally, DD3 single crystal superalloy melt can realize highly undercooled rapid solidification by adopting this coating mould, which further evinces that SiO₂–ZrO₂–B₂O₃ coating mould has an ideal nucleation inhibition for superalloy.     

Phase relations around langasite (La3Ga5SiO14) in the system La2O3–Ga2O3–SiO2 in air

Phase relations around langasite (LGS, La₃Ga₅SiO₁₄) were studied on the basis of phase assemblage observed during calcination and crystallization process of samples of various compositions in the ternary system La₂O₃–Ga₂O₃–SiO₂. A ternary compound of apatite structure, La₁₄Ga_xSi_9–xO_39–x/2 was found for the first time. Crystallization of this compound was observed in the cooling process of molten samples of stoichiometric LGS as well as LGS single crystal, demonstrating that LGS is an incongruent-melting compound. A phase diagram was established primarily based on the crystallization sequence in the cooling process.     

Glass formation in the PbBr2–PbCl2–PbF2–PbO–P2O5 system

New glasses in the PbBr₂–PbCl₂–PbF₂–PbO–P₂O₅ system have been prepared and characterized. The glass-forming regions have been explored and the stability of the glasses against crystallization studied. Results show that the PbBr₂–PbCl₂–P₂O₅ ternary system has a broad glass-forming region which extends to 30 mol% P₂O₅. Most of the glasses in this system show strong stability against crystallization and some have glass transition temperatures as low as 146°C. When 5% PbO or 5% PbF₂ is introduced into the PbBr₂–PbCl₂–P₂O₅ system, the glass-forming region becomes smaller and the glass transition temperatures increase. However, the introduction of 2.5% PbF₂ and 2.5% PbO into the ternary system increases the glass transition temperature and broadens the glass-forming region. The introduction of PbF₂ alone improves the glass-forming ability of the system while the introduction of PbO alone lowers the glass-forming ability.     

Study of electrical properties of MoO3–Fe2O3–P2O5 and SrO–Fe2O3–P2O5 glasses by impedance spectroscopy. II

The electrical and dielectric properties for three series of MoO₃–Fe₂O₃–P₂O₅ and one series of SrO–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 3 MHz and over the temperature range from 303 to 473 K. It was shown in Part I that the MoO₃ is incorporated into phosphate network and the structure/properties are strongly influenced by the overall O/P ratio. The Fe₂O₃ content and Fe(II)/Fe_tot ratio in these glasses have significant effects on the electrical conductivity and dielectric permittivity. With decreasing Fe₂O₃ content in MoO₃–Fe₂O₃–P₂O₅ glasses with O/P at 3.5 the dc conductivity, σ_dc(ω) decreases for two orders of magnitude, which indicates that the conductivity for these glasses depends on Fe₂O₃ and is independent of the MoO₃ content. Also, the dielectric properties such as ^′(ω), ^″(ω) and σ_ac(ω) and their variation with frequency and temperature indicates a decrease in relaxation intensity with increase in the concentration of MoO₃. On the other hand, the dc conductivity for MoO₃–Fe₂O₃–P₂O₅ glasses with O/P > 3.5 increases with the substitution of MoO₃ which has been explained by an increase in the number of non-bridging oxygens and formation of Fe–O–P bonds that are responsible for formation of small polarons. The increase in the dielectric permittivity, ^′(ω) with increasing MoO₃ content is attributed to the increase in the deformation of glass network with increasing bonding defects. For SrO–Fe₂O₃–P₂O₅ glasses the conductivity and dielectric permittivity remained constant with increasing SrO.     

Effect of CaO on the surface morphology and strength of water soaked Na2O–B2O3–Al2O3–SiO2 vitrified bond

The surface morphology of Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond with and without calcium oxide was studied by soaking vitrified bonded microcrystalline alumina composites in water. The content of water introduced to the vitrified bond was determined by thermal gravity analysis, and the effects of water and calcium on the phase separation and nucleation of the vitrified bond were investigated using scanning electron microscope and energy-dispersive X-ray spectrometer. Soaked in water for 72 h, the Na₂O–B₂O₃–Al₂O₃–SiO₂ vitrified bond presented a porous surface, and its bending strength declined with increasing sintering temperature. However, the Na₂O–CaO–B₂O₃–Al₂O₃–SiO₂ vitrified bond was more durable against aqueous coolant even needle-shape crystals were found clustered on the surface of the vitrified bond. The crystals were enriched with aluminosilicate tested by energy-dispersive X-ray spectrums. The appearance of crystals lessened the dissolution of the vitrified bond and made the bending strength increase in the sintering temperature region between 870 °C and 930 °C.     

Nuclear magnetic resonance studies of alkaline earth phosphosilicate and aluminoborosilicate glasses

The ¹¹B, ²⁷Al, ²⁹Si and ³¹P magic angle spinning (MAS) NMR spectra of MO–P₂O₅, MO–SiO₂–P₂O₅ and MO(M^′₂O)–SiO₂–Al₂O₃–B₂O₃ (M=Mg, Ca, Sr and Ba, M^′=Na) glasses were examined. In binary MO–P₂O₅ (M=Ca and Mg) glasses, the distributions of the phosphate sites, P(Q_n), can be expressed by a theoretical prediction that P₂O₅ reacts quantitatively with MO. In the ternary 0.30MO–0.05SiO₂–0.65P₂O₅ glasses, the 6-coordinated silicon sites were detected, whose population increases in the order of MgOxCaO–0.05SiO₂–(0.95−x)P₂O₅ glasses, its population increases with an increase in f (=([P₂O₅]−[MO]−[B₂O₃]−[Na₂O])/[SiO₂]) and has maximum at f=9. The signal due to the 5-coordinated silicon atoms is also observed when x is smaller than 0.45. When three network-forming oxides such as SiO₂, Al₂O₃ and B₂O₃ coexist, Al₂O₃ reacts preferably with MO. The populations of 4-coordinated boron atoms, N₄, are expressed well with r/(1−r), where r=([Na₂O]−[Al₂O₃])/([Na₂O]−[Al₂O₃]+[B₂O₃]). The correlation of the Raman signal at 1210 and 1350 cm⁻¹ with the NMR signal of Si(Q₆) at −215 ppm is also seen.     

Characteristics of ZnO–B2O3–CaO–Na2O–P2O5 glass powders prepared by spray pyrolysis

Fine-sized ZnO–B₂O₃–CaO–Na₂O–P₂O₅ glass powders with spherical shape were directly prepared by high temperature spray pyrolysis. The ZnO–B₂O₃–CaO–Na₂O–P₂O₅ powders prepared by spray pyrolysis at temperatures above 1200 °C had broad peaks at around 30° in the XRD patterns. The glass transition temperatures (T_g) of the glass powders obtained by spray pyrolysis at preparation temperatures between 900 °C and 1400 °C were near 480 °C regardless of the preparation temperatures. The dielectric layers formed from the glass powders prepared by spray pyrolysis at preparation temperatures above 1300 °C had clean surface and dense inner structure at the firing temperature of 580 °C. The transmittance of the dielectric layer formed from the glass powders obtained by spray pyrolysis at preparation temperature of 1400 °C was 90% at the firing temperature of 580 °C, in which the thickness of the dielectric layer was 13 μm. The UV cutoff edges gradually shift towards longer wavelength with increasing the preparation temperature of glass powders and the firing temperature of dielectric layers.     

Densities of Li2O–B2O3 melts

The densities have been systematically measured in xLi₂O–(1−x)B₂O₃ melts of different compositions with Li₂O content varying from x=0 to 0.68 from their respective melting points up to about 1450 K with a modified Archimedean method. The density decreased with increasing temperature for all the melts measured in this work. When x<0.15, the plot of temperature versus density could be well fitted by a quadratic polynomial function, and when x0.15, density decreased linearly with increasing temperature. At a fixed temperature, the density of the melts increased rapidly with Li₂O content, went through a maximum at about x=0.333 (Li₂O–2B₂O₃), and then decreased slowly as Li₂O content was further increased. In addition, the volume expansion coefficient (β) was calculated based on the densities measured in this work, and it was found that a maximum value appeared in the dependence of β on the molar ratio of Li₂O at about x=0.333.     

An X-ray diffraction study of the structure of B2O3---Cs2O liquids

The short range structures of B₂O₃ (90 mol%)---Cs₂O (10 mol%) and B₂O₃ (80 mol%)---Cs₂O (20 mol%) liquids were analyzed at 973 and 1053 K, respectively, by an X-ray diffraction method, and the effects of Cs₂O addition on the boron-oxygen bonding were investigated. The existence of BO₃ triangles, which form the so-called boroxol ring structure, was confirmed in B₂O₃---Cs₂O liquids, as well as in B₂O₃ liquid, but some fraction of the BO₃ triangles was thought to be converted to BO₄ tetrahedra. Similar results have previously been observed also in B₂O₃---Cs₂O glasses. A Cs atom was found to be surrounded by six O atoms; four Cs---O interatomic distances were about 3.2 Å but the other two were at 3.8–3.9 Å. These distances indicate that distorted Cs---O octahedra may exist in these B₂O₃---Cs₂O liquids.     

Electronic traps in mixed Si1−xGexO2 films

Thermally stimulated luminescence (TSL) and infrared (IR) spectroscopy were measured in plasma grown Si_1−xGe_xO₂ (x=0, 0.08, 0.15, 0.25, 0.5) with different thicknesses (12–40 nm). A comparison with the TSL properties of thermally grown SiO₂ and GeO₂ was also performed. A main IR absorption structure was detected, due to the superposition of the peaks related to the asymmetric O stretching modes of (i) Si–O–Si (at ≈1060 cm⁻¹) and (ii) Si–O–Ge (at 1001 cm⁻¹). Another peak at ≈860 cm⁻¹ was observed only for Ge concentrations, x>0.15, corresponding to the asymmetric O stretching mode in Ge–O–Ge bonds. A TSL peak was observed at 70°C, and a smaller structure at around 200°C. The 70°C peak was more intense in all Ge rich layers than in plasma grown SiO₂. Based on the thickness dependence of the signal intensity we propose that at Ge concentrations 0.25x0.5 TSL active defects are localised at interfacial regions (oxide/semiconductor, Ge poor/Ge rich internal interface, oxide external surface/atmosphere). Based on similarities between TSL glow curves in plasma grown Si_1−xGe_xO₂, thermally grown GeO₂ and SiO₂ we propose that oxygen vacancy related defects are trapping states in Si_1−xGe_xO₂ and GeO₂.     

XAS study of lanthanum coordination environments in glasses of the system K2O---SiO2---La2O3

The La L₁ and L₃ XANES and L₃ EXAFS have been investigated for the series of glasses 10K₂O---50SiO₂---x La₂O₃ (x = 1, 5, 10) and (10 − x)K₂O---40SiO₂−(x/3)La₂O₃ (x = 7.5, 5, 2.5) and model compounds La₂O₃, LaAlO₃, LaPO₄, La₂NiO₄, La₂CuO₄ and La(OH)₃. An edge resonance at 25 eV above the L₁ edge in the glass spectra is concentration-dependent, decreasing in intensity with increasing lanthanum concentration. The 2s → nd forbidden transition increases with La₂O₃ concentration, indicating a reduction in the ‘average’ site symmetry of the first coordination shell of La. Mapping _X(k) space, which is a new and promising technique, was employed to extract bond distance, coordination number and thermal parameters from the EXAFS. By this method, one calculates the complete _X(k) space a function of all physically reasonable values of the adjusted parameters in all possible combinations. The advantage in this method is the assurance of a global minimum. Bond lengths were comparable to those obtained by Fourier transforming the phase corrected EXAFS. The values are 2.42 Å (± 0.03 Å) for La---O. The coordination numbers (N ≤ 7 ± 1.5) were derived by mapping and comparison to the published structures for other La compounds. _X(k) mapping is compared with least-squares fitting the data, and the correlation between the Debye-Waller factor and coordination number is also discussed.     

Static B NMR studies of the short range order in alkali metal modified B2S3 glasses

The ¹¹B NMR spectra of xRb₂S+(1−x)B₂S₃ glasses in the range 0x0.75 and of xCs₂S+(1−x)B₂S₃ glasses in the range 0x0.60 are reported. The addition of Rb₂S to B₂S₃ creates on average approximately two and one-half tetrahedral borons for each added sulfur ion, whereas it is found that the addition of Cs₂S creates approximately 2 tetrahedral borons for each added sulfur ion. This behavior while more similar to that seen in the alkali borate glasses, contrasts that seen in the Na and K thioborate glasses, where six to eight and three, respectively, tetrahedral borons are formed for every sulfide anion added to the glass. These findings are supported by the IR and ¹¹B NMR spectra of the di-thioborate polycrystals (c-Rb₂S:2B₂S₃ and c-Cs₂S:2B₂S₃) whose structures appear to be comprised of two BS₄ tetrahedrals and two BS₃ trigonals (N₄0.5) like that in the alkali di-borate phases for both Rb and Cs. Unlike the ¹¹B NMR resonances of the sodium thioborate glasses where a single sharp line is observed for the tetrahedral boron site and a single quadrupolar broadened line is observed for all the trigonal sites, a third resonance line is observed at high alkali fractions for the rubidium and cesium thioborate glasses. This new structural feature may arise from asymmetric MBS₂ (meta-thioborate groups) or tetrahedral boron groups possessing a non-bridging sulfur.     

The effect of mixed alkaline earths on the diffusivity and the incorporation of iron in 5Na2O · xMgO · (15−x)CaO · yAl2O3 · (80−y)SiO2 melts

Diffusion coefficients of iron were measured in glass melts with the basic compositions 5Na₂O · xMgO · (15−x)CaO · yAl₂O₃ · (80−y)SiO₂ with x=5, 10 and y=0, 5, 7.5, 10 and 15. The melts were doped with 0.25 mol% Fe₂O₃ and studied in the temperature range from 1000 to 1600 °C using square-wave voltammetry. The voltammograms exhibited distinct peaks attributed to the reduction of Fe³⁺ to Fe²⁺, from which peak currents mixed diffusion coefficients of iron were calculated. Diffusion coefficients in all melt compositions which did not show crystallization could be fitted to Arrhenius equation. The diffusivities measured in different melt compositions were related to the same viscosity, i.e. not the same temperature. Increasing the alumina concentration from 5 to 10 mol% resulted in an increase of the viscosity corrected diffusivities. At further increasing alumina concentrations, the diffusivities get smaller again. This can be explained by the stabilizing effect of Na⁺ and Ca²⁺ on FeO⁻₄ and AlO⁻₄-tetrahedra, which strengthens the incorporation of Fe³⁺ into the glass structure.     

A SAXS study of V2O5·nH2O sols and gels

Small-angle X-ray scattering (SAXS) measurements on V₂O₅·nH₂O sols and gels, prepared by dissolving V₂O₅ glass into water at room temperature, show that there are V₂O₅ polymeric fibers entangled like random coils in the sol of n 5000, while the deviation from the random coil behavior occurs in the dilute sol of n 6000.

A Bragg peak appears at the scattering vector h 0.02 Å⁻¹ to be superimposed on an asymptotic h⁻²-course in the SAXS curve of the concentrated sol of n 680. This means that the spatial correlation between V₂O₅ polymeric fibers takes place even in the fluid state.

V₂O₅·nH₂O sols completely lose fluidity at n 250 to transfer to the gel state, where V₂O₅ polymeric fibers begin to pile up in the parallel with a substrate surface. Such a layer structure is preserved up to the gel of n 4. However, V₂O₅ polymeric fibers are randomly oriented within each layer.     

Vapor phase epitaxy of pure VO2 and V1−xCrxO2

The vapor phase epitaxy of thin epilayers of VO₂ and V_1−xCrxO₂ on TiO₂ transparent substrates is described. Chemical vapor deposition occurs by reacting a (VOCL₃/CrO₂Cl₂/H₂O/H₂) mixture at about 800°C using argon as a carrier gas. The preparation of pure VO₂ requires special care to make it homogeneously stoichiometric and to obtain steep concentration profiles at the TiO₂/VO₂ interface. Layers were obtained which had electrical and optical properties comparable to the best bulk crystals grown by other techniques. Homogeneous solid solutions of V_1−xCr_xO₂ epilayers were also grown for the first time in the range o < x < 0.17. Chromium concentration and homogeneity were determined by electron microprobe analysis. The separation coefficient k was also found to vary with x. It is close to unity below x = 0.001 and above this value Cr is incorporated more easily. High quality heteroepitaxial layers (1 cm² area, 1 to 30 μm thickness) of V_1−xCr_xO₂ have for the first time allowed the measurement of the optical absorption coefficient.     

Flux growth of PbMg1/3Ta2/3O3 single crystals

Single crystals of PbMg_1/3Ta_2/3O₃ (PMT) were grown by the flux method. The PbO–Pb₃O₄–B₂O₃ system was used as a solvent. Transparent and light yellow PMT single crystals of rectangular shape and dimensions up to 10×6×4 mm³ were obtained. For the applied growth conditions only, the crystals of the perovskite structure were grown. X-ray diffraction tests showed that at room temperature PMT exhibits cubic symmetry with lattice parameter a=4.042(1) Å. Dielectric studies pointed to relaxor properties of PMT. The characteristic broad and frequency-dependent maximum of dielectric permittivity was observed at 179.7 K (1 kHz).     

Viscosity matching of new PbF2–InF3–GaF3 based fluoride glasses and ZBLAN for high NA optical fiber

New multicomponent PbF₂–InF₃–GaF₃ bulk glasses have been investigated. They show lower phonon energy (540 cm⁻¹) in comparison with 580 cm⁻¹ for ZBLAN. Large PbF₂ concentration provided glasses with high refractive index up to 1.582 and the viscosity curves revealed an excellent thermal compatibility with ZBLAYN glass. A multimode fiber with a numerical aperture of 0.51, a loss of 0.85 dB/m at 1.3 μm was fabricated using the rotational casting method.     

Solubility of YBa2Cu3O7−δ and Nd1+xBa2−xCu3O7±δ in the BaO/CuO flux

The knowledge of the phase relations and solubilities in the Y–Ba–Cu–O and Nd–Ba–Cu–O systems are of fundamental importance for crystal growth and liquid-phase epitaxy of YBa₂Cu₃O_7−δ (YBCO) and Nd_1+xBa_2−xCu₃O_7±δ (NdBCO). The determination of the solubility curve of YBCO and NdBCO in a BaO/CuO flux containing 31 mol% BaO was done by observation of the formation and dissolution of crystals on the surface of the high-temperature solution. The heat of the solution of YBCO at 1000°C was found to be 34.7 kcal/mol, and for NdBCO at 1060°C, it was found to be 28.1 kcal/mol. The determination of the solubility curves requires special care, and the problems of the time-dependent shift of the solution composition due to the corrosion of the crucible is discussed. The scatter of the solubility data published by different authors could be due to the use of solutions with different Ba : Cu ratios, different determination methods, i.e. different crystallization mechanisms, different crucibles and starting chemicals.     

Structural distribution and rigidity of the glass network determined by EPR of Cu

The linewidth-broadening of the EPR spectra of Cu²⁺ in silicate, borate and phosphate glasses was analyzed in terms of the distribution of g_| and A_| (δ_| and δA_|) and related to the distribution of the rigidity of the network structure. X- and K-band spectra were measured for the glasses doped with ⁶³Cu²⁺ (93% abundance). The linewidth of the HFS shoulders with parallel orientation to H increased linearly with increasing m or microwave frequency. δg_| and δA_| showed a marked dependence on glass composition. For example, in Na₂O---B₂O₃ glasses, on going from x (mol% of Na₂O) being small through intermediate to large, δg_| varied from small through large to negligibly small. In contrast to these glasses δg_| was extremely large for 75PbO · 25B₂O₃ glass. The large δg_| for the Na₂O---B₂O₃ glassesof intermediate x was attributed to the coexistence of various borate groups competitively coordinating to Cu²⁺. Negligibly small δg_| for 70Na₂O · 30B₂O₃ glass and extremely large δg_| for 75PbO ·25B₂O₃ glass, both with a narrower structural distribution, reflect regidity of the glass network. The Pb---O bonding is strong enough to distort the coordination of Cu²⁺-complex. The situation is the reverse in Na₂O---B₂O₃ glasses.