On the higher order asymptotic analysis of a non-uniformly propagating dynamic crack along an arbitrary path

Transient mixed-mode elastodynamic crack growth along arbitrary smoothly varying paths is considered. Asymptotically, the crack tip stress field is square root singular with the angular variation of the singular term depending weakly on the instantaneous values of the crack tip speed and on the mode-I and mode-II stress intensity factors. However, for a material particle at a small distance away from the moving crack tip, the local stress field will depend not only on the instantaneous values of the crack tip speed and stress intensity factors, but also on the past history of these time dependent quantities. In addition, for cracks propagating along curved paths the stress field is also expected to depend on the nature of the curved crack path. Here, a representation of the crack tip fields in the form of an expansion about the crack tip is obtained in powers of radial distance from the tip. The higher order coefficients of this expansion are found to depend on the time derivative of crack tip speed, the time derivatives of the two stress intensity factors as well as on the instantaneous value of the local curvature of the crack path. It is also demonstrated that even if cracks follow a curved path dictated by the criterion K ₁₁ ^d =0, the stress field may still retain higher order asymmetric components related to non-zero local curvature of the crack path.     

THE STRESS FIELD AT MODE I CRACK TIP ON STEEL PIPE UNDER AXIAL TENSION

采用弹性断裂力学Westergaard 的方法,分析在轴向拉伸载荷作用下钢管的Ⅰ型裂纹尖端处的应力场. 基于Ⅰ型裂纹钢管应力场的特征,设定尖端处的应力艾雷函数,给出其应力场模型边界条件和应力场的解析函数,并利用裂纹尖端处的切平面研究裂纹尖端局部应力场,建立了钢管裂纹尖端应力场模型. 通过钢管与平板Ⅰ型裂纹应力场模型的对比,结果表明二者明显不同,钢管裂纹尖端处应力峰值影响范围仅与裂纹长度、拉应力相关.     

带有半埋藏空间裂纹的Cr12构件电磁热止裂分析

对带有半埋藏环形裂纹的Cr12标准拉伸试件进行了电磁热止裂研究.通过ZL-2型放电装置实现了半埋藏空间裂纹的止裂实验,采用微机控制电子万能试验机完成了止裂前后试件拉伸性能测试,同时计算了电磁热止裂前后应力强度因子的变化;建立了超强脉冲电流放电瞬间,环形裂纹尖端附近电流绕流、温度场和热应力场的数值分析模型,通过热-电耦合和热-机械耦合两个过程得到了脉冲放电瞬间拉伸试件中的电流矢量场、温度场和热应力场.研究表明:脉冲电流放电瞬间,围绕裂纹尖端金属熔化,钝化了裂尖,并围绕裂尖形成了热压应力场,得到了超细化的金属组织,止裂后抗拉强度得到了提高,达到了止裂的目的.     

Field structure at mode III dynamically propagating crack tip in elastic-viscoplastic materials

An elastic-viscoplastic mechanics model is used to investigate asymptotically the mode Ⅲ dynamically propagating crack tip field in elastic-viscoplastic materials. The stress and strain fields at the crack tip possess the same power-law singularity under a linear-hardening condition. The singularity exponent is uniquely determined by the viscosity coefficient of the material. Numerical results indicate that the motion parameter of the crack propagating speed has little effect on the zone structure at the crack tip. The hardening coefficient dominates the structure of the crack-tip field. However, the secondary plastic zone has little influence on the field. The viscosity of the material dominates the strength of stress and strain fields at the crack tip while it does have certain influence on the crack-tip field structure. The dynamic crack-tip field degenerates into the relevant quasi-static solution when the crack moving speed is zero. The corresponding perfectly-plastic solution is recovered from the linear-hardening solution when the hardening coefficient becomes zero.     

基于神经网络的界面裂纹尖端场分析

通过构造反向传播神经网络，对裂纹尖端的应力场进行模拟，进而实现对裂纹尖端应力场甬数的逼近。得到的网络具有较高的联想、记忆能力和相当的稳定性，并且可以快速、准确地得到带裂纹构件的裂纹尖端应力场，从而确定裂纹尖端的塑性区和分析裂纹的扩展。数值计算给出了LY12-CZ材料裂纹扩展方向的计算结果，与实验结果吻合较好，还给出了两相材料含界面裂纹在复合型载荷作用下的塑性区形状的变化情况，并对两相材料含界面裂纹在复合型载荷作用下裂纹的扩展方向进行了预测。     

STRESS－STBAIN FIELD NEAR CRACK TIP AND CALCULATION OF CRITICAL STRESS OF CRACK PROPAGATION IN A PURE BENDING BEAM OF RECTANGULAR SECTION WITH ONE－SIDED MODEICRACK

ＳＴＲＥＳＳ－ＳＴＢＡＩＮＦＩＥＬＤＮＥＡＲＣＲＡＣＫＴＩＰＡＮＤＣＡＬＣＵＬＡＴＩＯＮＯＦＣＲＩＴＩＣＡＬＳＴＲＥＳＳＯＦＣＲＡＣＫＰＲＯＰＡＧＡＴＩＯＮＩＮＡＰＵＲＥＢＥＮＤＩＮＧＢＥＡＭＯＦＲＥＣＴＡＮＧＵＬＡＲＳＥＣＴＩＯＮＷＩＴＨＯＮＥ－Ｓ...     

界面裂纹无摩擦接触裂尖应力场

基于哈密顿原理，通过分离变量及共轭辛本征函数展开法，解析地球解界面裂纹无摩擦接触裂尖的扇形域方程，从另一条途径研究了界面裂尖应力场的特征。     

单边裂纹通电瞬间裂尖处应力场的复变函数解

本文应用复变函数中的Schwarz-Christoffel变换方法，在具单边裂纹的导电薄板通电瞬间温度场复变函数解的基础上，推导出用复变函数表示的应力场的表达式，并且给出算例，通过理论计算得知；当对具有单边裂纹的导电薄板通入适当密度的电流时，裂尖处温度急剧升高并熔化便裂尖变钝。同时，在裂尖周围形成了有利于遏制裂纹扩展的压应力场，有效地防止了裂纹沿其主方向和其它方向延伸。从理论上证明了电磁热效应在裂尖处产生高温形成焊口的同时，压应力场的形成是遏制裂纹扩展的主要因素之一。理论计算结果与实验结果比较吻合，为这一止裂方法的应用打下了理论基础。     

THE EXACT SOLUTIONS OF ELASTIC－PLASTIC CRACK LINE FIELD FOR MODE ⅡPLANE STRESS CRACK

ＴＨＥＥＸＡＣＴＳＯＬＵＴＩＯＮＳＯＦＥＬＡＳＴＩＣ－ＰＬＡＳＴＩＣＣＲＡＣＫＬＩＮＥＦＩＥＬＤＦＯＲＭＯＤＥＩＩＰＬＡＮＥＳＴＲＥＳＳＣＲＡＣＫＹｉＺｈｉｊｉａｎ（易志坚）ＷａｎｇＳｈｉｊｉｅ（王士杰）ＷａｎｇＸｉａｎｇｊｉａｎ（王向坚）（Ｒｅｃｅ...     

Stress-strain field near crack tip and calculation of critical stress of crack propagation in a pure bending beam of rectangular section with one-sided mode i crack

This paper studies the stress-strain field near crack tip in a pure bending beam of rectangular section with one-sided mode I crack by the analytic method of Ref. [1], then it gives the stress and strain components at the crack tip when the crack propagates and further it obtains the formulas of calculating the elastic deformed area width, the deformed intensity area width and the equation groups of calculating the critical stress of crack propagation, last the equation group of calculating critical stress of crack propagation is verified by calculating instance. The maximum error is 0.18%. First Received May 7, 1994.     

THERMAL STRESS FIELD WHEN CRACK ARREST IN AN AXIAL SYMMETRY METAL DIE USING ELECTROMAGNETIC HEATING

In order to solve the thermal stress field around crack tip in metal die when crack prevention using electromagnetic heating, a metal die with a half-embedded round crack was selected as the study object. The complex function method was used as a basis for the theoretical model of the space crack prevention in metal dies using electromagnetic heating. The crack arrest was accomplished by a pulse current discharge through the inner and outer. The theoretical analysis results show that the temperature around the crack tip rises instantly above the melting point of the metal. Small welded joints are formed at a small sphere near the crack tip inside the metal die by metal melting as a result of the heat concentration effect when the current pulse discharged. The thermal compressive stress field appears around the crack tip at the moment. The research results show that the crack prevention using electromagnetic heating can decrease the stress concentration and forms a compressive stress area around the crack tip, and also prevents the main crack from propagating further, and the goal of crack preventing can be reached.     

压电材料裂纹顶端条状电饱和区模型的力学分析

在线性压电本构方程框架下,对裂纹顶端条状电饱和区模型进行了严格的数学分析．完整地考虑了各向异性力电耦合效应．建立了电饱和区尺寸与外加电场的依赖关系．证实了当裂纹垂直极化轴时,压电材料的断裂应力随着外加正电场的增加而减小,随着外加负电场的增加而增加．当裂纹平行于极化轴时,与极化轴平行的外加电场对断裂应力无影响     

爆炸载荷下板条边界斜裂纹的动态扩展行为

为了研究爆炸应力波作用下板条边界斜裂纹的动态扩展行为,首先分析了爆炸应力波在含边界斜裂纹板条中的传播,其次采用动态焦散线实验方法,进行了爆炸载荷下板条边界斜裂纹扩展规律的实验研究.研究结果表明,爆炸应力波作用下,板条试件边界斜裂纹的扩展过程中,裂纹扩展速度、扩展加速度和裂尖动态应力强度因子随时间波动变化,扩展速度最大值...     

I-II复合型裂缝断裂角的分层剪滞模型与分析

采用修正的剪滞理论建立了岩石、混凝土等准脆性材料的I-II复合型裂缝在单向拉伸荷载作用下的计算模型,得到了与实验相吻合且优于传统S判据的断裂角。通过对远场应力、斜裂缝区应力以及子层位移的合理简化,得到了求解剪滞分析模型的边界条件,进而得到了含斜裂缝的各子层位移分布函数。引入最大应力集中因子,对I-II复合型裂缝前缘应力场进行简化;基于斜裂缝沿最大应力集中因子方向扩展,得到裂缝的断裂角。根据斜裂缝的应力分布,设置不同的子层分区,得到了更为细化的位移分布模式。通过对计算数据的分析,针对单向拉伸荷载作用下的I-II复合型裂缝,建立了按应力场分区设置子层的分层剪滞模型,得到更为精确的斜裂缝断裂角。     

状态向量的扩展有限元方法研究

利用哈密顿正则方程的半解析法计算单元位移场和应力场,可以得到精度比较高的解.但此半解析法在计算应力尖峰区域时,该区域要细化网格.当裂纹扩展时,又要重新生成刚度矩阵进行求解,导致求解效率降低.利用扩展有限元处理裂纹的不连续性,当裂纹扩展时可以避免网格的重构.为充分利用状态向量方程和扩展有限元的优势,该文将两者结合起来分析材料的断裂问题:计算应力强度因子和模拟裂纹扩展.最后通过算例分析,验证了该文提出方案的可行性.     

A transverse crack tip field in bimaterial

The asymptotic field near an interface crack tip is analyzed with the fully nonlinear theory. By dividing the crack tip field into narrowing sectors and an expanding sector, the asymptotic equations for the crack tip field are derived and solved. The singular characters of stress and strain near the crack tip are revealed.     

Elastoplastic near field solution for mode II crack loaded by remote shear stress in an infinite plate

A suitable elastic stress field near the crack line which satisfied the far field boundary conditions and the boundary conditions of the crack surfaces has been obtained and successful analysis has been made of a near crack line field for an infinite elastic-perfectly plastic medium containing a quasi-statically propagating plane stress crack subjected to far field shear stress. It is shown that the solutions of the problem of mode II crack loaded by remote shear stress from the Westergaard method in some previous papers is used as the elastic stress field near the crack line, are inappropriate.     

THE PROBLEM OF I-II COMBINED PLANE CRACK SOLVED WITH WESTERGAARD STRESS FUNCTION

直接获得I-II复合型平面裂纹问题裂纹尖端区域的应力场是一个比较复杂的问题,在此应用Westergaard应力函数求解I-II复合型平面裂纹问题,导出了裂纹尖端区域应力分量的表达式。该方法推导过程简单,物理概念清晰,其结果与一般断裂力学教材和文献中的结果一致。同时,应用叠加原理将裂纹面上的作用力转化为裂纹外边界的受力,给出了解决裂纹面上有作用力的I-II复合型平面裂纹问题的解题方法。     

与界面相交的裂纹尖端的应力奇异性分析

为了确定与结合材料的界面相交的裂纹尖端附近的应力奇异性次数，提出了一种基于最小势能原理的一维特殊有限元法，以奇异点为原点半径r0的扇形奇异区域，可以简化为一维线性领域，即一条以代表结合材料的两个自由表面为端点的线段。对该一维线性领域作网格划分，采用三节点一维等参数二次单元。数值计算结果与已有理论解的比较表明，该方法具有很高的精度和效率，最后，利用文中给出的方法，得到了各向异性结合材料中与界面以任意角相交的裂纹尖端的奇异性次数随裂纹的变化规律。     

横观各向同性油气藏水力压裂裂纹扩展规律研究

针对横观各向同性与各向同性油气藏水力压裂裂纹扩展的差异性,基于扩展有限元法建立水力压裂力学模型,通过ABAQUS子程序开发了各向同性和横观各向同性岩体的起裂判据。在各向同性岩体数值模拟结果与解析解以及现场压裂典型曲线对比吻合的基础上,得到了包含层理构造的横观各向同性岩体水力压裂过程中裂纹扩展规律。层理类岩体水力压裂的裂缝扩展方向由地应力状态、层理方向以及岩体与层理界面抗拉强度共同决定;水力压裂过程中,注水压力在裂纹尖端产生应力集中,层理面法向分量先达到界面抗拉强度时,裂纹沿层理方向开裂,反之裂纹沿垂直最小地应力的方向扩展;裂纹扩展速度随层理抗拉强度的增加而降低;由于地层的滤失,随压裂液的注入,裂纹长宽尺度增长速率降低。