共查询到16条相似文献,搜索用时 125 毫秒
1.
利用混合微分求积法,对任意荷载作用下不同材料梯度分布的功能梯度材料平板柱形弯曲问题进行了分析。针对广义微分求积法求解集中荷载问题精度不高的缺点,本文利用小波微分求积法进行了改进。由于小波对突变信号具有良好的自适应描述能力,因此在平板宽度方向上,利用小波微分求积法可以有效地处理集中荷载;而在材料梯度变化的板厚方向上,则利用广义微分求积法计算量小且精度高的特点进行离散计算。计算表明,混合微分求积法不仅保留了广义微分求积法高效的特点,而且能有效地求解任意荷载作用的问题。通过算例,分析了在机械荷载作用下,材料不同梯度形式、平板上下表面材料性质差异对功能梯度平板结构响应的影响。 相似文献
2.
3.
针对梁式结构受移动荷载作用的非平稳随机振动问题,提出了一种综合利用微分求积法和虚拟激励法DQ-PEM的新方法。梁式结构受移动荷载作用的振动控制方程为含Dirac函数的偏微分方程,利用微分求积(DQ)-积分求积法(IQ)法将其振动控制方程转化为不含Dirac函数的常微分方程。同时,将表示荷载位置变化的Dirac函数视为移动荷载的非平稳化函数,再结合虚拟激励法的思想,可得梁式结构在确定性荷载作用下的虚拟响应,进而得到其非平稳随机响应。通过工程算例验证了该方法的准确性与有效性,并进一步讨论了不同速度和不同边界条件下梁式结构受移动荷载作用的随机振动问题。 相似文献
4.
为了评估人行荷载作用下梁式结构的振动舒适度,利用微分求积-积分求积,即DQ-IQ混合法求解移动荷载作用下梁的振动响应。人行荷载作用下梁式结构的振动控制方程是含Dirac函数的偏微分方程,首先利用IQ法离散与时间相关的Dirac函数,再利用DQ法把控制方程转化为二阶常系数微分方程,最后利用Newmark算法求解微分方程。以某钢结构连廊为例,利用DQ法计算结构自振频率并与解析解进行对比,结果验证了节点选取和边界条件施加的合理性,再利用DQ-IQ混合法和振型叠加法分别计算了不同行走步频下连廊的响应,计算结果表明,DQ-IQ混合法具有较高的可靠性和精确性。DQ-IQ混合法也可以推广到诸如车辆荷载作用下路面或桥梁的动力响应等其他移动荷载下结构的振动分析。 相似文献
5.
为了评估人行荷载作用下梁式结构的振动舒适度,利用微分求积-积分求积,即DQ-IQ混合法求解移动荷载作用下梁的振动响应。人行荷载作用下梁式结构的振动控制方程是含Dirac函数的偏微分方程,首先利用IQ法离散与时间相关的Dirac函数,再利用DQ法把控制方程转化为二阶常系数微分方程,最后利用Newmark算法求解微分方程。以某钢结构连廊为例,利用DQ法计算结构自振频率并与解析解进行对比,结果验证了节点选取和边界条件施加的合理性,再利用DQ-IQ混合法和振型叠加法分别计算了不同行走步频下连廊的响应,计算结果表明,DQ-IQ混合法具有较高的可靠性和精确性。DQ-IQ混合法也可以推广到诸如车辆荷载作用下路面或桥梁的动力响应等其他移动荷载下结构的振动分析。 相似文献
6.
7.
本文采用一种精确、简便的数值计算方法——微分求积单元法(DQEM)对变截面门式刚架结构进行了力学分析。首先建立了一般荷载作用下变截面构件的平衡微分方程,并采用微分求积法进行离散,进而得出了较为精确的分析变截面构件的单元力学模型。该模型的刚度方程不仅反映了单元的刚度性质,而且反映了单元的实际荷载作用,可较为精确地分析变截面门式刚架结构在分布载荷作用下的受力性能。通过与有限元法计算结果的比较,表明了微分求积单元法在变截面刚架的力学分析中的正确性和优越性。微分求积单元法可用于任意形状的刚架结构的静力分析。 相似文献
8.
利用粘弹性微分型本构关系和薄板理论,对线性变厚度粘弹性矩形薄板建立了在切向均布随从力作用下的运动微分方程,采用微分求积法研究了在随从力作用下线性变厚度粘弹性矩形薄板的稳定性问题,具体对对边简支对边固支和三边简支一边固支条件下体变为弹性、畸变服从Kelvin-Voigt模型的变厚度粘弹性矩形板在随从力下的广义特征值问题进行了求解,分析了薄板的长宽比、厚度比及材料的无量纲延滞时间的变化对随从力作用下矩形薄板的失稳形式及相应的临界荷载的影响. 相似文献
9.
本文提出了新型带虚点的径向基函数微分求积法,并将其应用于模拟薄板弯曲问题。带虚点的径向基函数微分求积法是一种基于传统径向基函数微分求积法的新型无网格方法,传统方法只将中心点放在计算域内,而该方法扩展了中心点的区域,使其既位于计算域内又位于计算域外,在不增加计算量和存储量的基础上,显著提高计算精度。本文首次尝试将此方法应用于求解薄板弯曲问题,并与解析解和传统方法进行对比,验证了此方法的优越性 相似文献
10.
11.
A simple and accurate mixed finite element-differential quadrature formulation is proposed to study the free vibration of rectangular and skew Mindlin plates with general boundary conditions. In this technique, the original plate problem is reduced to two simple bar (or beam) problems. One bar problem is discretized by the finite element method (FEM) while the other by the differential quadrature method (DQM). The mixed method, in general, combines the geometry flexibility of the FEM and high accuracy and efficiency of the DQM and its implementation is more easier and simpler than the case where the FEM or DQM is fully applied to the problem. Moreover, the proposed formulation is free of the shear locking phenomenon that may be encountered in the conventional shear deformable finite elements. A simple scheme is also presented to exactly implement the mixed natural boundary conditions of the plate problem. The versatility, accuracy and efficiency of the proposed method for free vibration analysis of rectangular and skew Mindlin plates are tested against other solution procedures. It is revealed that the proposed method can produce highly accurate solutions for the natural frequencies of rectangular and skew Mindlin plates with general boundary conditions. 相似文献
12.
13.
14.
The present paper deals with the dynamic behaviour of a clamped beam subjected to a sub-tangential follower force at the free end. The aim of this work is to obtain the frequency–axial load relationship for a beam with a variable circular cross-section. In this way, one can identify both divergence critical loads – where the frequency goes to zero – and the flutter critical load – in correspondence with two frequencies coalescence. The numerical approach adopted for solving the partial differential equation of motion is the differential quadrature method (henceforth DQM). This method was proposed by Bellmann and Casti [Bellmann, R.E., Casti, J., 1971. Differential quadrature and long-term integration. J. Math. Anal. 34, 235–238] and has been employed recently in the solution of solid mechanics problems by Bert and Malik [Bert, C.W., Malik, M., 1996. Differential quadrature method in computational mechanics: a review. Appl. Mech. Rev., ASME, 49 (1), 1–28] and Chen et al. [Chen, W., Stritz, A.G., Bert, C.W., 1997. A new approach to the differential quadrature method for fourth-order equations. Int. J. Numer. Method Eng. 40, 1941–1956]. More precisely, a modified version of this method has been used, as proposed by De Rosa and Franciosi [De Rosa, M.A., Franciosi, C., 1998a. On natural boundary conditions and DQM. Mech. Res. Commun. 25 (3), 279–286; De Rosa, M.A., Franciosi, C., 1998b. Non classical boundary conditions and DQM. J. Sound Vibrat. 212(4), 743–748] to satisfy all the boundary conditions.Some frequencies–axial loads relationships are reported in order to show the influence of tapering on the critical loads. 相似文献
15.
A simple and accurate mixed modal-differential quadrature formulation is proposed to study the dynamic behavior of beams in contact with fluid. Both free and forced vibration problems are considered. The proposed mixed methodology uses the modal technique for the structural domain while it applies the differential quadrature method (DQM) to the fluid domain. Thus, the governing partial differential equations of the beam and fluid are reduced to a set of ordinary differential equations in time. In the case of forced vibration, the Newmark time integration scheme is employed to solve the resulting system of ordinary differential equations. The proposed formulation, in general, combines the simplicity of the modal method and high accuracy and efficiency of the DQM. Its application is shown by solving some beam-fluid interaction problems. Comparisons with analytical solutions show that the present method is very accurate and reliable. To demonstrate its efficiency, the test problems are also solved using the finite element method (FEM). It is found that the proposed method can produce better accuracy than the FEM using less computational time. The technique presented in this investigation is general and can be used to solve various fluid-structure interaction problems. 相似文献
16.
《应用数学和力学(英文版)》2019,(4)
The quasi-static and dynamic responses of a thermoviscoelastic Timoshenko beam subject to thermal loads are analyzed. First, based on the small geometric deformation assumption and Boltzmann constitutive relation, the governing equations for the beam are presented. Second, an extended differential quadrature method(DQM)in the spatial domain and a differential method in the temporal domain are combined to transform the integro-partial-differential governing equations into the ordinary differential equations. Third, the accuracy of the present discrete method is verified by elastic/viscoelastic examples, and the effects of thermal load parameters, material and geometrical parameters on the quasi-static and dynamic responses of the beam are discussed. Numerical results show that the thermal function parameter has a great effect on quasi-static and dynamic responses of the beam. Compared with the thermal relaxation time, the initial vibrational responses of the beam are more sensitive to the mechanical relaxation time of the thermoviscoelastic material. 相似文献