弹性地基上多孔功能梯度材料矩形板的自由振动与临界屈曲载荷分析

多孔功能梯度材料(FGM)构件的特性与孔隙率和孔隙分布形式有密切关系。本文基于经典板理论,考虑不同孔隙分布形式时修正的混合率模型,研究Winkler弹性地基上四边受压多孔FGM矩形板的自由振动与临界屈曲载荷特性。首先利用Hamilton原理和物理中面的定义推导Winkler弹性地基上四边受压多孔FGM矩形板自由振动的控制微分方程并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程和边界条件进行变换,得到计算无量纲固有频率和临界屈曲载荷的代数特征方程。将问题退化为孔隙率为零时的FGM矩形板并与已有文献进行对比以验证其有效性。最后计算并分析了梯度指数、孔隙率、地基刚度系数、长宽比、四边受压载荷及边界条件对多孔FGM矩形板无量纲固有频率的影响以及各参数对无量纲临界屈曲载荷的影响。     

多孔功能梯度材料Timoshenko梁的自由振动分析

基于Timoshenko梁理论研究多孔功能梯度材料梁(FGMs)的自由振动问题.首先,考虑多孔功能梯度材料梁的孔隙率模型,建立了两种类型的孔隙分布.其次,基于Timoshenko梁变形理论,给出位移场方程、几何方程和本构方程,利用Hamilton原理推导多孔功能梯度材料梁的自由振动控制微分方程,并进行无量纲化,然后应用微分变换法(DTM)对无量纲控制微分方程及其边界条件进行变换,得到含有固有频率的等价代数特征方程.最后,计算了固定-固定(C-C)、固定-简支(C-S)和简支-简支(S-S)三种不同边界下多孔功能梯度材料梁自由振动的无量纲固有频率.将其退化为均匀材料与已有文献数据结果对照,验证了正确性.讨论了孔隙率、细长比和梯度指数对多孔功能梯度材料梁无量纲固有频率的影响.     

FGM环扇形板的面内自由振动分析

假定功能梯度材料(FGM)的物性参数沿环扇形板径向按照幂律梯度变化,基于平面线弹性理论,建立了FGM环扇形板面内自由振动的运动控制微分方程。采用二维微分求积法(DQM)对FGM环扇形板面内自由振动的无量纲运动控制微分方程进行离散,数值求解了不同边界条件下FGM环扇形板面内自由振动的无量纲固有频率,同时也给出了FGM环扇形板扇形角为!/4时有限元商用软件ANSYS的部分计算结果,验证了本文方法的正确性。结果表明,在相应边界条件下,FGM环扇形板的梯度指标、内外半径比以及扇形角对无量纲固有频率均有影响,其计算结果和分析方法可供设计和研究参考。     

功能梯度变截面梁自由振动和稳定性研究

基于忽略了梁截面剪切变形和转动惯量效应的Euler-Bernoulli梁理论,研究了轴向力作用下轴向功能梯度变截面梁的横向自由振动问题,将轴向功能梯度Euler-Bernoulli梁自由振动固有频率和临界荷载的计算转化为变系数常微分方程特征值问题。运用插值矩阵法可一次性计算出轴向功能梯度变截面梁各阶振动固有频率和临界荷载,分析了轴向荷载对轴向功能梯度Euler-Bernoulli梁自由振动固有频率的影响,即轴向压力使梁的第1阶固有频率降低,轴向拉力使梁的第1阶固有频率增大。在简支-简支梁(H-H)边界条件下、不同截面宽锥度系数c_b和截面高锥度系数c_h,且区间划分点数n为40时,本文计算结果与已有文献计算结果之间的最大相对误差不超过0.00768%;在简支-简支梁(H-H)、固端-自由梁(C-F)、固端-固端梁(C-C)这三种不同边界条件下,不同c_b和c_h,且n为40时,最大相对误差不超过0.101%,说明了本文方法的有效性和良好的计算精度。     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法（DTM）,研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

非均匀Winkler弹性地基上变厚度矩形板自由振动的DTM求解

针对非均匀Winkler弹性地基上变厚度矩形板的自由振动问题,通过一种有效的数值求解方法——微分变换法(DTM),研究其无量纲固有频率特性。已知变厚度矩形板对边为简支边界条件,其他两边的边界条件为简支、固定或自由任意组合。采用DTM将非均匀Winkler弹性地基上变厚度矩形板无量纲化的自由振动控制微分方程及其边界条件变换为等价的代数方程,得到含有无量纲固有频率的特征方程。数值结果退化为均匀Winker弹性地基上矩形板以及变厚度矩形板的情形,并与已有文献采用的不同求解方法进行比较,结果表明,DTM具有非常高的精度和很强的适用性。最后,在不同边界条件下分析地基变化参数、厚度变化参数和长宽比对矩形板无量纲固有频率的影响,并给出了非均匀Winkler弹性地基上对边简支对边固定变厚度矩形板的前六阶振型。     

旋转FGM圆环形截面柔性梁的振动特性

工程实际中直升机的旋翼和风力机的叶片等可简化为旋转柔性悬臂梁的动力学问题。针对旋转FGM圆环形截面柔性悬臂梁的横向振动问题,基于Euler-Bernoulli梁理论和Hamilton原理,建立了自由振动时的运动微分方程。对运动微分方程和边界条件进行量纲归一化处理,采用微分求积法对其进行离散化,得到了系统的广义特征方程。分析了旋转FGM圆环形截面柔性梁的前三阶量纲为一的固有频率随梯度指标和不同梯度指标、径长比下量纲为一的固有频率随轮毂量纲为一的角速度的变化关系。数值计算结果表明,在给定某些参数情况下,旋转FGM环形截面悬臂梁的前三阶量纲为一的固有频率随轮毂量纲为一的角速度的增大而增大,第二阶、第三阶量纲为一的固有频率随梯度指标的增大而增大的趋势较为明显。     

动能梯度环形截面梁的横向自由振动

对功能梯度材料制成的环形截面梁,假设材料的物性参数沿壁厚方向按幂率变化,基于Lagrange函数和Hamilton 原理,建立了该梁横向自由振动的Hamilton 对偶方程组. 采用辛方法求解了Hamilton 矩阵的辛本征问题,得到了简支、两端固定、悬臂和左端固定右端铰支4 种约束的FGM(functionally gradedmaterials)环形截面梁的固有频率和振型函数. 算例给出了这4 种约束的FGM 环形截面梁前8 阶无量纲固有频率随材料体积分数的变化规律,分析了材料体积分数对FGM 环形截面梁固有频率的影响.     

基于一种广义梁理论的弹性地基FGM简支梁自由振动解析解

基于一种扩展的n阶广义剪切变形梁理论(n-GBT),应用Hamilton原理,建立了以轴向位移、横向位移及转角为未知函数的Winkler-Pasternak弹性地基功能梯度材料(FGM)梁的自由振动方程,采用Navier法获得了弹性地基FGM简支梁自由振动的精确解。与多种梁理论预测结果进行比较,讨论并给出了GBT阶次n的理想取值;分析了梯度指标、跨厚比及地基刚度对FGM梁频率的影响。结果表明:本文方法有效且适用范围广,若采用高阶剪切梁理论模型,宜取n≥3的奇数;FGM梁的自振频率随材料梯度指标的增大而减小;随跨厚比的增加而增大,但当跨厚比大于20,跨厚比增加对频率的影响很小;随地基刚度的增加而增大,地基刚度足够大时,频率趋于收敛。     

功能梯度材料梁自由振动的线性与非线性振动

基于数值模拟和理论分析两种方法，研究了功能梯度材料(functional gradient materials,FGM)梁自由振动下的线性与非线性振动问题。通过解析法求解了FGM梁在经典理论下以及一阶剪切理论下的力学行为，得到了FGM梁在简支和固端约束下的固有频率。理论分析了不同边界条件、不同梁理论下、梯度指数、长细比等因素对于FGM梁固有频率的影响；不论经典梁理论还是一阶剪切理论，随着梯度指数的增加，FGM梁的固有频率都随之减小。通过ABAQUS仿真模拟，得到FGM梁数值模拟下的非线性固有频率。将理论解与数值解进行对比，完善力学模型。在多种理论下，利用解析法和数值模拟的方法，给出FGM梁结构振动响应的线性与非线性解。     

Vibration analysis of piezoelectric sandwich nanobeam with flexoelectricity based on nonlocal strain gradient theory

A nonlocal strain gradient theory(NSGT) accounts for not only the nongradient nonlocal elastic stress but also the nonlocality of higher-order strain gradients,which makes it benefit from both hardening and softening effects in small-scale structures.In this study, based on the NSGT, an analytical model for the vibration behavior of a piezoelectric sandwich nanobeam is developed with consideration of flexoelectricity. The sandwich nanobeam consists of two piezoelectric sheets and a non-piezoelectric core. The governing equation of vibration of the sandwich beam is obtained by the Hamiltonian principle. The natural vibration frequency of the nanobeam is calculated for the simply supported(SS) boundary, the clamped-clamped(CC) boundary, the clamped-free(CF)boundary, and the clamped-simply supported(CS) boundary. The effects of geometric dimensions, length scale parameters, nonlocal parameters, piezoelectric constants, as well as the flexoelectric constants are discussed. The results demonstrate that both the flexoelectric and piezoelectric constants enhance the vibration frequency of the nanobeam.The nonlocal stress decreases the natural vibration frequency, while the strain gradient increases the natural vibration frequency. The natural vibration frequency based on the NSGT can be increased or decreased, depending on the value of the nonlocal parameter to length scale parameter ratio.     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.     

Natural frequencies of a non homogeneous isotropic elastic infinite plate of variable thickness resting on elastic foundation

Summary The dynamic free response of a nonhomogeneous isotropic elastic infinite plate of parabolically varying thickness resting on an elastic foundation has been studied. The frequencies, deflections and moments corresponding to the first five modes of vibration have been computed for the two combinations of boundary conditions, clamped-clamped (C-C) and clamped-simply supported (C-SS) and various values of taper constant, nonhomogeneity parameter and foundation modulus by applying the method of Frobenius for the solution of the governing differential equation of motion.

---

Sommario Si sono studiate le oscillazioni libere di una piastra elastica infinita, non omogenea, isotropa, di spessore parabolicamente variabile, poggiata su un suolo elastico. Applicando il metodo di Frobenius per la soluzione della equazione differenziale del moto si sono calcolate le frequenze, le deformate ed i momenti corrispondenti ai primi cinque modi di vibrazione per due combinazioni di condizioni al contorno, incastro-incastro ed incastro-appoggio e diversi valori della rastremazione, del parametro di non omogeneità e del modulo del suolo.

     

Winkler-Pasternak弹性地基梁自由振动的二维弹性分析Two-dimensional elastic analysis for free vibration of beams set on winkler-pasternak elastic foundations

基于二维线弹性理论,应用Hamilton原理,获得Winkler-Pasternak弹性地基梁自由振动的控制微分方程,应用微分求积法(DQM)数值研究了梁自由振动的无量纲频率特性。计算结果与已有的结果(Bernoulli-Euler梁和Timoshenko梁)比较表明,本文的分析方法对弹性地基长梁和短梁自由振动的研究都有效。最后考虑了几何参数对梁频率的影响,以及不同边界条件下地基系数对频率的影响和收敛性。     

Winkler-Pasternak弹性地基梁自由振动的二维弹性分析

基于二维线弹性理论,应用Hamilton原理,获得Winkler-Pasternak弹性地基梁自由振动的控制微分方程,应用微分求积法(DQM)数值研究了梁自由振动的无量纲频率特性。计算结果与已有的结果(Bernoulli-Euler梁和Timoshenko梁)比较表明,本文的分析方法对弹性地基长梁和短梁自由振动的研究都有效。最后考虑了几何参数对梁频率的影响,以及不同边界条件下地基系数对频率的影响和收敛性。     

Size-dependent vibration of functionally graded curved microbeams based on the modified strain gradient elasticity theory

On the basis of the modified strain gradient elasticity theory, the free vibration characteristics of curved microbeams made of functionally graded materials (FGMs) whose material properties vary in the thickness direction are investigated. A size-dependent first-order shear deformation beam model is developed containing three internal material length scale parameters to incorporate small-scale effect. Through Hamilton’s principle, the higher-order governing equations of motion and boundary conditions are derived. Natural frequencies of FGM curved microbeams corresponding to different mode numbers are evaluated for over a wide range of material property gradient index, dimensionless length scale parameter and aspect ratio. Moreover, the results obtained via the present non-classical first-order shear deformation beam model are compared with those of degenerated beam models based on the modified couple stress and the classical theories. It is found that the difference between the natural frequencies predicted by the various beam models is more significant for lower values of dimensionless length scale parameter and higher values of mode number.     

Free flapewise vibration analysis of rotating double-tapered Timoshenko beams

Free vibration analysis of a rotating double-tapered Timoshenko beam undergoing flapwise transverse vibration is presented. Using an assumed mode method, the governing equations of motion are derived from the kinetic and potential energy expressions which are derived from a set of hybrid deformation variables. These equations of motion are then transformed into dimensionless forms using a set of dimensionless parameters, such as the hub radius ratio, the dimensionless angular speed ratio, the slenderness ratio, and the height and width taper ratios, etc. The natural frequencies and mode shapes are then determined from these dimensionless equations of motion. The effects of the dimensionless parameters on the natural frequencies and modal characteristics of a rotating double-tapered Timoshenko beam are numerically studied through numerical examples. The tuned angular speed of the rotating double-tapered Timoshenko beam is then investigated.