关于弹性梁的数学模型

叙述和比较一维弹性体的两种不同建模方法, 即弹性梁的传统建模方法和基于 Kirchhoff-Cosserat模型的建模方法. 应用精确Cosserat模型分析梁的三维运动. 考虑中 心线的拉伸压缩变形、截面的剪切变形、截面转动的惯性和端部载荷影响等因素, 建立精确 的弹性梁动力学方程. 讨论梁的静态和动态平衡稳定性. Kirchhoff杆、铁摩辛柯 梁和欧拉--伯努利梁等为Cosserat模型在各种简化条件下的特例.     

考虑剪切效应的旋转FGM楔形梁刚柔耦合动力学建模与仿真

本文对一类中心刚体-柔性梁系统在大范围转动下的刚柔耦合动力学问题进行了研究. 柔性梁为功能梯度材料(functionally graded materials, FGM)楔形变截面梁,材料体积分数在梁轴向呈幂律分布变化. 以弧长坐标来描述柔性FGM梁的几何位移关系,分别使用倾角和拉伸应变变量描述柔性梁的横向弯曲和纵向拉伸变形,并计及剪切效应. 采用假设模态法离散变形场,运用第二类拉格朗日方程进行方程推导,得到系统考虑剪切效应的刚柔耦合动力学模型. 基于全新的刚柔耦合动力学建模理论,研究不同轴向材料梯度分布的FGM楔形梁,通过数值仿真计算,分析讨论不同的转速、梯度分布规律以及变截面参数对系统动力学特性的影响. 结果表明,剪切效应对大高跨比的FGM楔形梁的变形影响较为明显,不容忽略;材料梯度分布规律和截面参数的选取均会对旋转FGM楔形梁的动力学响应和频率产生较大影响. 本文提出的考虑剪切效应的倾角刚柔耦合动力学模型是对以往非剪切模型的进一步完善,可应用于工程中的 Timoshenko梁结构的动力学问题求解.      

非对称混杂边界轴向运动Timoshenko梁橫向振动分析

研究两端带有扭转弹簧且弹簧系数均可任意变化的非对称混杂边界下的轴向运动Timoshenko梁的横向振动.利用非对称混杂边界条件推导对应任意弹簧系数的系统超越方程以及特征函数.运用数值方法计算系统的固有频率及其相应的模态函数,并研究确定梁的刚度、轴向速度以及边界处扭转弹簧的刚度的影响.通过数值算例,比较7imoshenko梁、瑞利梁、剪切梁和欧拉梁的固有频率随轴向速度的变化,分析转动惯量和剪切变形的影响.     

时变张力作用下轴向运动梁的分岔与混沌

轴向运动结构的横向参激振动一直是非线性动力学领域的研究热点之一. 目前研究较多的是轴向速度摄动的动力学模型,参数激励由速度的简谐波动产生. 但在工程应用中,存在轴向张力波动的运动结构较为广泛,而针对轴向张力摄动的模型研究较少. 本文研究了时变张力作用下轴向变速运动黏弹性梁的分岔与混沌. 考虑随着时间周期性变化的轴向张力,计入线性黏性阻尼,采用Kelvin模型的黏弹性本构关系,给出了梁横向非线性 振动的积分--偏微分控制方程. 首先应用四阶Galerkin截断方法将控制方程离散化,然后采用四阶Runge-Kutta方法计算系统的数值解,进而确定其动力学行为. 基于梁中点的横向位移和速度的数值结果,仿真了梁沿平均轴速、张力摄动幅值、张力摄动频率以及黏弹性系数变化的倍周期分岔与混 沌运动,并且通过计算系统的最大李雅普诺夫指数来识别其混沌行为. 结果表明:较小的平均轴速有助于梁的周期运动,梁在临界速度附近容易发生倍周期分岔与混沌行为. 随着张力摄动幅值的增大,梁的振动幅值的混沌区间不断增大. 较小的黏弹性系数和张力摄动频率更容易使梁发生混沌运动. 最后,给出时程图、频谱图、相图以及Poincaré 映射图来确定梁的混沌运动.      

考虑剪切效应的旋转FGM楔形梁刚柔耦合动力学建模与仿真

本文对一类中心刚体-柔性梁系统在大范围转动下的刚柔耦合动力学问题进行了研究.柔性梁为功能梯度材料(functionally graded materials,FGM)楔形变截面梁,材料体积分数在梁轴向呈幂律分布变化.以弧长坐标来描述柔性FGM梁的几何位移关系,分别使用倾角和拉伸应变变量描述柔性梁的横向弯曲和纵向拉伸变形,并计及剪切效应.采用假设模态法离散变形场,运用第二类拉格朗日方程进行方程推导,得到系统考虑剪切效应的刚柔耦合动力学模型.基于全新的刚柔耦合动力学建模理论,研究不同轴向材料梯度分布的FGM楔形梁,通过数值仿真计算,分析讨论不同的转速、梯度分布规律以及变截面参数对系统动力学特性的影响.结果表明,剪切效应对大高跨比的FGM楔形梁的变形影响较为明显,不容忽略;材料梯度分布规律和截面参数的选取均会对旋转FGM楔形梁的动力学响应和频率产生较大影响.本文提出的考虑剪切效应的倾角刚柔耦合动力学模型是对以往非剪切模型的进一步完善,可应用于工程中的Timoshenko梁结构的动力学问题求解.     

旋转中心刚体-FGM梁刚柔热耦合动力学特性研究

对旋转中心刚体-功能梯度材料(functionally graded material,FGM)梁刚柔热耦合动力学特性进行研究.FGM梁为物理性能参数沿厚度方向呈幂律分布的欧拉伯努利梁.考虑柔性梁的横向弯曲变形和轴向拉伸变形, 并计入横向弯曲变形引起的纵向缩短,即非线性耦合变形量.考虑变截面空心梁在外部高温、内冷通道冷却情况下的热力耦合对系统动力学特性的影响,求解得到FGM梁沿厚度方向分布的温度场, 进而在本构关系中计入热应变.采用假设模态法对柔性梁变形场进行离散,运用第二类拉格朗日方程推导得到系统的刚柔热耦合动力学方程,并编制动力学仿真软件, 然后通过仿真算例对系统的动力学问题进行研究.结果表明:不同截面梁动力学响应差异较大, 因此需对实际系统合理建模;大范围运动已知时, 考虑热冲击载荷的FGM梁将有效抑制横向弯曲变形,而大范围运动恒定时随热冲击的叠加会出现高频振荡; 大范围运动未知时,外力矩和热冲击载荷相互作用产生热力耦合效应, 导致系统呈现高频振荡,同时与中心刚体大范围旋转运动产生刚柔热耦合效应.      

旋转楔形-回形梁的高次动力学建模和末端变形分析

对四种不同结构中心刚体-柔性Euler Bernoulli梁系统进行刚柔耦合动力学分析．其中以等截面梁、变截面梁、等截面回形梁、变截面回形梁为对象，研究楔形梁及回形梁对系统的末端变形位移影响．变截面梁的宽高尺寸沿着轴向线性变化．梁的变形包含了轴向、横向、耦合变形项（横向弯曲引起的纵向缩短）．采用假设模态法和第二类Lagrange方程建立系统的动力学方程，并用C++编写软件进行动力学仿真．研究表明：在相同条件下，梁的截面尺寸及空心部分对梁末端变形位移影响十分明显，且当梁在较大变形情况下，该高次耦合模型依然能得到正确的结果，因此在针对实际结构建模时，建立符合实际截面的模型至关重要．     

基于初应力法的作大范围运动柔性梁动力学建模理论研究

研究了初应力法的作大范围运动柔性梁的建模理论.根据连续介质理论,考虑应变-位移中的非线性项,用一致质量有限元法对柔性梁进行离散,基于Jourdain速度变分原理导出定轴转动下大范围运动为自由的柔性梁刚-柔耦合动力学方程.从其刚柔耦合动力学方程出发,考虑在大范围运动已知情况下的结构动力学方程.通过引入准静态概念,把其结构动力学方程转化为准静态方程.对纵向和横向变形节点坐标进行坐标分离,解出与纵向变形相关的准静态方程,得到准静态时的纵向应力表达式,从而获得附加刚度项.并对此非惯性系下作大范围运动柔性梁的结构动力学方程进行数值仿真,对零次近似模型、一次近似模型、初应力法动力学模型的仿真结果进行分析,揭示三种模型的动力学性质的差异.     

中心刚体-柔性梁系统的最优跟踪控制

对考虑阻尼影响的中心刚体-柔性梁系统的动力特性和主动控制进行研究. 研究 中考虑了3种动力学模型：一次近似耦合模型、一次近似简化模型和线性化模型. 一次近 似模型中同时考虑了柔性梁的轴向变形和横向变形. 若在一次近似耦合模型中忽略轴向变 形的影响，则可得出一次近似简化模型. 线性化模型是对一次近似简化模型的线性化处理. 另外研究中考虑了3种阻尼因素：结构阻尼、风阻、中心刚体轴承处的阻尼. 控制设计采 用最优跟踪控制方法. 给出了从物理测量中提取模态坐标的滤波器方法. 研究结果显 示，一次近似简化模型能够有效地对系统的动力学行为进行描述；阻尼对系统的动力学特 性有着重要影响；当系统大范围运动为低速时，模态滤波器能够较好地提取出控制律所需 的模态坐标，最优跟踪控制方法能够使得系统跟踪所期望的运动轨迹，并且柔性梁的弹性 振动可得到抑制.     

ANCF索梁单元应变耦合问题与模型解耦

索粱结构在土木工程、航空航天等领域有着广泛的应用.在各类索梁动力学建模方法中,由于绝对节点坐标方法(absolute nodal coordinate formulation,ANCF)能够描述柔性体的大变形和大转动问题,因此非常适合大变形索梁结构的动力学建模.对绝对节点坐标索梁单元的应变进行分析可知,弯曲变形会引起单元内部轴向应变的不均匀分布,即单元轴向应变与弯曲应变相互耦合.这种应变耦合效应使单元产生伪应变能,导致单元刚度增大,造成单元失真.分析不同弯曲角下的单元应变及应变能可知,弯曲变形越大,单元失真越严重.通过构造等效一维杆单元重新描述轴向应变,实现了轴向应变与弯曲应变解耦.在此基础上推导广义弹性力,得到了绝对节点坐标索梁单元的应变解耦模型.对解耦前后的两种梁模型进行静力学和动力学仿真,结果表明;解耦模型消除了单元伪应变,相比原模型表现出更好的收敛性和曲率连续性,在相同单元数目下具有更高的精度.同时由于解耦模型降低了单元刚度,因此相比原模型,速度曲线中不再有高频振动.     

随从力作用下热弹耦合轴向运动梁的稳定性

研究了切向均布随从力作用下热弹耦合轴向运动梁的稳定性问题。建立了热弹耦合轴向运动梁 在随从力作用下的运动微分方程,采用归一化幂级数法,推导出了2种边界条件下热弹耦合轴向运动梁在随 从力作用下的特征方程。计算了系统的前3阶量纲一复频率,分析了量纲一运动速度、量纲一热弹耦合系数 和量纲一随从力等参数对梁的稳定性的影响。     

作大范围空间运动柔性梁的刚-柔耦合动力学

研究带中心刚体的作大范围空间运动梁的刚-柔耦合动力学问题．从精确的应变-位移关系式出发，在动力学变分方程中，考虑了横截面转动的惯性力偶和与扭转变形有关的弹性力的虚功率，用速度变分原理建立了考虑几何非线性的空间梁的刚-柔耦合动力学方程，用有限元法进行离散．通过对空间梁系统的数值仿真研究扭转变形和截面转动惯量对系统动力学性态的影响．     

Effects of rotary inertia on sub- and super-critical free vibration of an axially moving beam

The most important issue in the vibration study of an engineering system is dynamics modeling. Axially moving continua is often discussed without the inertia produced by the rotation of the continua section. The main goal of this paper is to discover the effects of rotary inertia on the free vibration characteristics of an axially moving beam in the sub-critical and super-critical regime. Specifically, an integro-partial-differential nonlinear equation is modeled for the transverse vibration of the moving beam based on the generalized Hamilton principle. Then the effects of rotary inertia on the natural frequencies, the critical speed, post-buckling vibration frequencies are presented. Two kinds of boundary conditions are also compared. In super-critical speed range, the straight configuration of the axially moving beam loses its stability. The buckling configurations are derived from the corresponding nonlinear static equilibrium equation. Then the natural frequencies of the post-buckling vibration of the super-critical moving beam are calculated by using local linearization theory. By comparing the critical speed and the vibration frequencies in the sub-critical and super-critical regime, the effects of the inertia moment due to beam section rotation are investigated. Several interesting phenomena are disclosed. For examples, without rotary inertia, the study overestimates the stability of the axially moving beam. Moreover, the relative differences between the super-critical fundamental frequencies of the two theories may increase with an increasing beam length.     

Approximate and numerical analysis of nonlinear forced vibration of axially moving viscoelastic beams

Steady-state periodical response is investigated for an axially moving viscoelastic beam with hybrid supports via approximate analysis with numerical confirmation. It is assumed that the excitation is spatially uniform and temporally harmonic. The transverse motion of axially moving beams is governed by a nonlinear partial-differential equation and a nonlinear integro-partial-differential equation. The material time derivative is used in the viscoelastic constitutive relation. The method of multiple scales is applied to the governing equations to investigate primary resonances under general boundary conditions. It is demonstrated that the mode uninvolved in the resonance has no effect on the steady-state response. Numerical examples are presented to demonstrate the effects of the boundary constraint stiffness on the amplitude and the stability of the steady-state response. The results derived for two governing equations are qualitatively the same,but quantitatively different. The differential quadrature schemes are developed to verify those results via the method of multiple scales.     

粘弹性轴向运动梁的非线性动力学行为

本文研究了带有小脉动的轴向运动粘弹性梁的分岔及混沌现象。建立了系统的动力学模型。通过二阶Galerkin截断，把描述系统运动的偏微分方程离散化。利用数值方法分别分析了几种运动脉动频率时，梁随轴向运动脉动幅值，平均速度及粘弹性系数等几个参数变化时的运动分岔行为。利用Lyapunov指数识别系统的动力学行为，区分准周期振动和混沌运动。     

Vibration and stability of an axially moving viscoelastic beam with hybrid supports

Vibration and stability are investigated for an axially moving beam constrained by simple supports with torsion springs. A scheme is proposed to derive natural frequencies and modal functions from given boundary conditions of an elastic beam moving at a constant speed. For a beam constituted by the Kelvin model, effects of viscoelasticity on the free vibration are analyzed via the method of multiple scales and demonstrated via numerical simulations. When the axial speed is characterized as a simple harmonic variation about the constant mean speed, the instability conditions are presented for axially accelerating viscoelastic beams in parametric resonance. Numerical examples show the effects of the constraint stiffness, the mean axial speed, and the viscoelasticity.     

AN EFFICIENT DYNAMIC MODELING METHOD OF AN AXIALLY MOVING CANTILEVER BEAM AND FREQUENCY RESPONSE ANALYSIS

轴向移动梁动力学问题具有广泛的工程应用背景,如：机械手、机床主轴、武器身管等.计算轴向移动梁动力学响应是评估结构动力学性能以及最终指导结构设计的一个重要手段.采用Rayleigh-Ritz法、拉格朗日方程推导了轴向移动悬臂梁时变动力学方程.选取幂级数函数构造试函数对轴向移动系统动力问题进行求解.幂级数函数良好的积分与微分性能,使得推导容易以矩阵的形式快速进行,便于符号运算软件直接生成MATLAB程序.由于MATLAB基本数据单位为矩阵,符号软件生成的程序只需经过简单修改便可进行动力学计算.大大缩短了轴向移动梁从建模到动力学分析的时间,过程十分高效.通过四组算例,将本文方法计算得到的动力学响应与文献数据进行对比,对该方法准确性进行了验证,并给出了幂级数函数拟合阶数的选取原则.以此为基础,研究了轴向移动梁的频率响应特性.分为考虑重力与忽略重力两种情况,讨论了轴向振动幅度对其频率响应特性的影响.     

Vibration and stability of an axially moving beam immersed in fluid

Vibration and stability are investigated for an axially moving beam in fluid and constrained by simple supports with torsion springs. The equations of motion of the beam with uniform circular cross-section, moving axially in a horizontal plane at a known rate while immersed in an incompressible fluid are derived first. An “axial added mass coefficient” and an initial tension are implemented in these equations. Based on the Differential Quadrature Method (DQM), a solution for natural frequency is obtained and numerical results are presented. The effects of axially moving speed, axial added mass coefficient, and several other system parameters on the dynamics and instability of the beam are discussed. Particularly, natural frequency in terms of the moving speed is presented for fixed–fixed, hinged–hinged and hybrid supports with torsion spring. It is shown that when the moving speed exceeds a certain value, the beam becomes subject to buckling-type instability. The variations of the lowest critical moving speed with several key parameters are also investigated.     

THE STABILITY OF AN AXIALLY ACCELERATING BEAM ON SIMPLE SUPPORTS WITH TORSION SPRINGS

The axially moving beams on simple supports with torsion springs are studied. The general modal functions of the axially moving beam with constant speed have been obtained from the supporting conditions. The contribution of the spring stiffness to the natural frequencies has been numerically investigated. Transverse stability is also studied for axially moving beams on simple supports with torsion springs. The method of multiple scales is applied to the partialdifferential equation governing the transverse parametric vibration. The stability boundary is derived from the solvability condition. Instability occurs if the axial speed fluctuation frequency is close to the sum of any two natural frequencies or is two fold natural frequency of the unperturbed system. It can be concluded that the spring stiffness makes both the natural frequencies and the instability regions smaller in the axial speed fluctuation frequency-amplitude plane for given mean axial speed and bending stiffness of the beam.