基于反馈力浸入边界法模拟复杂动边界流动

浸入边界法是模拟流固耦合的重要数值方法之一。本文采用反馈力浸入边界方法,对旋转圆柱和水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟。其中,固体边界采用一系列离散的点近似代替,流体为不可压缩牛顿流体,使用笛卡尔自适应加密网格,利用有限差分法进行求解。固体对流场的作用通过构造适宜的反馈力函数实现。本文首先通过旋转圆柱绕流的计算结果同实验结果进行对比,吻合较好,验证了该计算方法的可靠性。然后针对水电站水力过渡过程中水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟,得到导叶动态绕流后的流场分布特性和涡结构的演化特性。     

动网格生成技术及非定常计算方法进展综述

对应用于飞行器非定常运动的数值计算方法(包括动态网格技术和相应的数值离散格式)进行了综述.根据网格拓扑结构的不同,重点论述了基于结构网格的非定常计算方法和基于非结构/混合网格的非定常计算方法,比较了各种方法的优缺点.在基于结构网格的非定常计算方法中,重点介绍了刚性运动网格技术、超限插值动态网格技术、重叠动网格技术、滑移动网格技术等动态结构网格生成方法,同时介绍了惯性系和非惯性系下的控制方程,讨论了非定常时间离散方法、动网格计算的几何守恒律等问题.在基于非结构/混合网格的非定常计算方法中,重点介绍了重叠非结构动网格技术、重构非结构动网格技术、变形非结构动网格技术以及变形/重构耦合动态混合网格技术等方法,以及相应的计算格式,包括非定常时间离散、几何守恒律计算方法、可压缩和不可压缩非定常流动的计算方法、各种加速收敛技术等.在介绍国内外进展的同时,介绍了作者在动态混合网格生成技术和相应的非定常方法方面的研究与应用工作.     

空化、超空化流动的数值模拟方法研究

基于结构化网格，运用可压缩流N—S方程及k-ε湍流模型对流场进行求解，在低压区域引入一种基于混合密度函数的空化模型对轴对称体的空化、超空化流动进行了数值模拟．通过将半球圆柱的计算结果与实验数据和前人的计算结果进行对比，验证了所发展的数值方法的可靠性．最后，采用非定常的数值方法，研究了钝头体射弹的空化、超空化流动特性，并模拟了其超空泡的发展过程．     

全机绕流Euler方程多重网格分区计算方法

全机三维复杂形状绕流数值求解只能采用分区求解的方法,本文采用可压缩Euler方程有限体积方法以及多重网格分区方法对流场进行分区计算。数值方法采用改进的van Leer迎风型矢通量分裂格式和MUSCL方法,基于有限体积方法和迎风型矢通量分裂方法,建立一套处理子区域内分界面的耦合条件。各个子区域之间采用显式耦合条件,区域内部采用隐式格式和局部时间步长等,以加快收敛速度。计算结果飞机表面压力分布等气动力特性与实验值进行了比较,二者基本吻合。计算结果表明采用分析“V”型多重网格方法,能提高计算效率,加快收敛速度达到接近一个量级。根据全机数值计算结果和可视化结果讨论了流场背风区域旋涡的形成过程。     

基于混合网格多维梯度重构的热流预测方法研究

高超声速气动热环境的数值计算对算法和网格的敏感度极高. 随着高超声速飞行器外形日益复杂, 生成高质量的结构网格时间成本呈指数增加, 难以满足工程应用的需求. 非结构/混合网格因具有很强的复杂外形适应能力, 为了缩短任务周期, 有必要在非结构/混合网格上开展高精度的气动热环境数值计算方法研究. 梯度重构方法是影响非结构/混合网格热流计算精度的重要因素之一. 本文通过引入多维梯度重构方法, 发展了基于常规的非结构/混合网格的高精度热流计算方法, 对典型的高超声速Benchmark算例(二维圆柱)进行了模拟, 并与气动力计算广泛采用的Green-Gauss类方法和最小二乘类方法进行了对比. 计算结果表明, 多维梯度重构方法能有效提高非结构/混合网格热流预测精度, 其鲁棒性和收敛性更好. 最后将多维梯度重构方法应用于常规混合网格的三维圆柱和三维双椭球绕流问题, 得到了与实验值吻合较好的热流计算结果, 展现了良好的应用前景.      

基于非结构/混合网格模拟黏性流的高阶精度DDG/FV混合方法

间断Galerkin有限元方法(discontinuous Galerkin method, DGM) 因具有计算精度高、模板紧致、易于并行等优点, 近年来已成为非结构/混合网格上广泛研究的高阶精度数值方法. 但其计算量和内存需求量巨大, 特别是对于网格规模达到百万甚至数千万的大型三维实际复杂外形问题, 其计算量和存储量对计算资源的消耗是难以承受的. 基于“混合重构”的DG/FV 格式可以有效降低DGM 的计算量和存储量. 本文将DDG 黏性项离散方法推广应用于DG/FV 混合算法, 得到新的DDG/FV混合格式, 以进一步提高DG/FV混合算法对于黏性流动模拟的计算效率. 通过Couette流动、层流平板边界层、定常圆柱绕流, 非定常圆柱绕流和NACA0012 翼型绕流等二维黏性流算例, 优化了DDG 通量公式中的参数选择, 验证了DDG/FV 混合格式对定常和非定常黏性流模拟的精度和计算效率, 并与广泛使用的BR2-DG 格式的计算结果和效率进行对比研究. 一系列数值实验结果表明, 本文构造的DDG/FV混合格式在二维非结构/混合网格的Navier-Stokes 方程求解中, 在达到相同的数值精度阶的前提下, 相比BR2-DG格式, 对于隐式时间离散的定常问题计算效率提高了2 倍以上, 对于显式时间离散的非定常问题计算效率提高1.6 倍, 并且在一些算例中, 混合格式具有更优良的计算稳定性. DDG/FV 混合格式提升了计算效率和稳定性, 具有良好的应用前景.      

流固耦合分析的一种改进CBS有限元算法

针对流固耦合问题, 发展了一种基于任意拉格朗日-欧拉(ALE)描述有限元法的弱耦合分区算法. 运用半隐式特征线分裂算法求解Navier-Stokes方程, 在压力Poisson 方程中引入质量源项以满足几何守恒律; 运用子块移动技术更新动态网格, 并配以光滑处理防止网格质量下降; 采用Newmark-β 法求解结构运动方程. 为保持流体-结构界面处速度和动量守恒, 利用修正结合界面边界条件方法求解界面处速度通量和动量通量. 运用本方法分别模拟了不同雷诺数下单圆柱横向和两向流致振动、串列双圆柱两向流致振动. 计算表明, 本文方法计算效率高, 计算结果与已有实验和数值计算数据吻合.     

动态混合网格生成及隐式非定常计算方法

建立了一种基于动态混合网格的非定常数值计算方法. 混合网格由贴体的四边形网格、外场 的多层次矩形网格和中间的三角形网格构成. 当物体运动时，贴体四边形网格随物体运动而 运动，而外场的矩形网格保持静止，中间的三角形网格随之变形；当物体运动位移较大，导 致三角形网格的质量降低，甚至导致网格相交时，在局部重新生成网格. 新网格上的物理量 由旧网格上的物理量插值而得. 为了提高计算效率，采用了双时间步和子迭代相结合的隐式 有限体积格式计算非定常Navier-Stokes方程. 子迭代采用高效的块LU-SGS方法. 利用该 方法数值模拟了NACA0012振荡翼型的无黏和黏性绕流，得到了与实验和他人计算相当一致 的结果.     

配置点谱方法-人工压缩法(SCM-ACM)求解同心圆筒内流体流动

发展了配置点谱方法SCM(Spectral collocation method)和人工压缩法ACM(Artificial compressibility method)相结合的SCM-ACM数值方法,计算了柱坐标系下稳态不可压缩流动N-S方程组。选取典型的同心圆筒间旋转流动Taylor-Couette流作为测试对象,首先,采用人工压缩法获得人工压缩格式的非稳态可压缩流动控制方程;再将控制方程中的空间偏微分项用配置点谱方法进行离散,得到矩阵形式的代数方程;编写了SCM-ACM求解不可压缩流动问题的程序;最后,通过与公开发表的Taylor-Couette流的计算结果对比,验证了求解程序的有效性。结果证明,本文发展的SCM-ACM数值方法能够用于求解圆筒内不可压缩流体流动问题,该方法既保留了谱方法指数收敛的特性,也具有ACM形式简单和易于实施的特点。本文发展的SCM-ACM数值方法为求解柱坐标下不可压缩流体流动问题提供了一种新的选择。     

自由活塞压缩管ALE方法数值模拟

当前国际上实现高焓气体流动的实验手段之一是自由活塞驱动类脉冲设备,包括自由活塞激波风洞和自由活塞膨胀管.采用自由活塞压缩管作为激波风洞和膨胀管的驱动段时,其驱动能力在很大程度上决定了该类设备的性能.本文采用计算流体力学中任意拉格朗日——欧拉方法(arbitrary Lagrangian Eulerian)数值模拟了压缩管内部的自由活塞运动和气体流动特征.采用移动网格技术来适应活塞运动边界,耦合求解网格运动和气体流动过程,并通过双时间步长方法进行流体运动的时间积分.为了满足几何守恒律(geometric conservation law),对移动网格的法向矢量和表面面积计算进行了修正.不同时刻的活塞位置试验测量结果及欧拉方法预测结果,以及基于简单波理论获得的运动活塞底部气体压力、活塞速度与活塞位置都与当前的ALE方法十分一致.该工作为下一步数值模拟自由活塞激波风洞和自由活塞膨胀管中包括压缩管、激波管和喷管等不同部位的耦合流动提供了基础.      

A SOLVER USING NEWTON‘S METHOD FOR UNSTEADY VISCOUS FLOWS

A solver is developed for time-accurate computations of viscous flows based on the conception of Newton‘s method. A set of pseudo-time derivatives are added into governing equations and the discretized system is solved using GMRES algorithm. Due to some special properties of GMRES algorithm, the solution procedure for unsteady flows could be regarded as a kind of Newton iteration. The physical-time derivatives of governing equations are discretized using two different approaches, I.e., 3-point Euler backward, and Crank-Nicolson formulas, both with 2nd-order accuracy in time but with different truncation errors. The turbulent eddy viscosity is calculated by using a version of Spalart~Allmaras one-equation model modified by authors for turbulent flows. Two cases of unsteady viscous flow are investigated to validate and assess the solver, I.e., low Reynolds number flow around a row of cylinders and transonic bi-circular-arc airfoil flow featuring the vortex shedding and shock buffeting problems, respectively. Meanwhile, comparisons between the two schemes of timederivative discretizations are carefully made. It is illustrated that the developed unsteady flow solver shows a considerable efficiency and the Crank-Nicolson scheme gives better results compared with Euler method.     

A finite volume unstructured multigrid method for efficient computation of unsteady incompressible viscous flows

An unstructured non‐nested multigrid method is presented for efficient simulation of unsteady incompressible Navier–Stokes flows. The Navier–Stokes solver is based on the artificial compressibility approach and a higher‐order characteristics‐based finite‐volume scheme on unstructured grids. Unsteady flow is calculated with an implicit dual time stepping scheme. For efficient computation of unsteady viscous flows over complex geometries, an unstructured multigrid method is developed to speed up the convergence rate of the dual time stepping calculation. The multigrid method is used to simulate the steady and unsteady incompressible viscous flows over a circular cylinder for validation and performance evaluation purposes. It is found that the multigrid method with three levels of grids results in a 75% reduction in CPU time for the steady flow calculation and 55% reduction for the unsteady flow calculation, compared with its single grid counterparts. The results obtained are compared with numerical solutions obtained by other researchers as well as experimental measurements wherever available and good agreements are obtained. Copyright © 2004 John Wiley & Sons, Ltd.     

复杂无粘流场数值模拟的矩形/三角形混合网格技术

建立了一套模拟复杂无粘流场的矩形／三角形混合网格技术，其中三角形仅限于物面附近，发挥非结构网格的几何灵活性，以少量的网格模拟复杂外型；同时在以外的区域采用矩形结构网格，发挥矩形网格计算简单快速的优势，有效地克服全非结构网格计算方法需要较大内存量和较长ＣＰＵ时间的不足．混合网格系统由修正的四分树方法生成．将ＮＮＤ有限差分与ＮＮＤ有限体积格式有机地融合于混合网格计算，消除了全矩形网格模拟曲边界的台阶效应，同时保证了网格间的通量守恒．数值实验表明本方法在模拟复杂无粘流场方面的灵活性和高效性．     

A novel efficient hybrid DSMC–dynamic collision limiter algorithm for multiscale transitional flows

A new 2D parallel multispecies polyatomic particle–based hybrid flow solver is developed by coupling the Direct Simulation Monte Carlo (DSMC) method with a novel Dynamic Collision Limiter (DCL) approach to solve multiscale transitional flows. The hybrid DSMC‐DCL solver can solve nonequilibrium multiscale flows with length scales ranging from continuum to rarefied. The DCL method, developed in this work, dynamically assigns different number of collisions in cells, which is based on the local value of K‐S parameter such that the number of collisions per time step is limited in near‐equilibrium flow regions. Present hybrid solver uses the Kolmogorov‐Smirnov statistical test as the continuum breakdown parameter, based on which, the solution domain is decomposed into near‐equilibrium and nonequilibrium flow regions. Direct Simulation Monte Carlo is used where nonequilibrium flow regions are encountered, while the DCL method is used where flow regions are found to be in near‐equilibrium state. In this work, we have studied hypersonic flow of nitrogen over a blunt body with an aerospike and supersonic flow of argon through a micronozzle. The results obtained by the hybrid DSMC‐DCL solver are compared and shown to agree well with the experimental data and with those obtained from DSMC, with significant savings in the computational cost.     

A sharp‐interface immersed boundary framework for simulations of high‐speed inviscid compressible flows

A new finite‐volume flow solver based on the hybrid Cartesian immersed boundary (IB) framework is developed for the solution of high‐speed inviscid compressible flows. The IB method adopts a sharp‐interface approach, wherein the boundary conditions are enforced on the body geometry itself. A key component of the present solver is a novel reconstruction approach, in conjunction with inverse distance weighting, to compute the solutions in the vicinity of the solid‐fluid interface. We show that proposed reconstruction leads to second‐order spatial accuracy while also ensuring that the discrete conservation errors diminish linearly with grid refinement. Investigations of supersonic and hypersonic inviscid flows over different geometries are carried out for an extensive validation of the proposed flow solver. Studies on cylinder lift‐off and shape optimisation in supersonic flows further demonstrate the efficacy of the flow solver for computations with moving and shape‐changing geometries. These studies conclusively highlight the capability of the proposed IB methodology as a promising alternative for robust and accurate computations of compressible fluid flows on nonconformal Cartesian meshes.     

Hybrid methods for airframe noise numerical prediction

This paper describes some significant steps made towards the numerical simulation of the noise radiated by the high-lift devices of a plane. Since the full numerical simulation of such configuration is still out of reach for present supercomputers, some hybrid strategies have been developed to reduce the overall cost of such simulations. The proposed strategy relies on the coupling of an unsteady nearfield CFD with an acoustic propagation solver based on the resolution of the Euler equations for midfield propagation in an inhomogeneous field, and the use of an integral solver for farfield acoustic predictions.In the first part of this paper, this CFD/CAA coupling strategy is presented. In particular, the numerical method used in the propagation solver is detailed, and two applications of this coupling method to the numerical prediction of the aerodynamic noise of an airfoil are presented.Then, a hybrid RANS/LES method is proposed in order to perform some unsteady simulations of complex noise sources. This method allows for significant reduction of the cost of such a simulation by considerably reducing the extent of the LES zone. This method is described and some results of the numerical simulation of the three-dimensional unsteady flow in the slat cove of a high-lift profile are presented. While these results remain very difficult to validate with experiments on similar configurations, they represent up to now the first 3D computations of this kind of flow.     

用鲁棒Riemann求解器和运动重叠网格计算旋翼粘性绕流

发展了一种基于鲁棒Riemann求解器和运动重叠网格技术计算直升机悬停旋翼流场的方法。基于惯性坐标系,悬停旋翼流场是非定常流场,控制方程为可压缩Reynolds平均Navier-Stoke方程,其对流项采用Roe近似Reimann求解器离散,使用改进的五阶加权基本无振荡格式进行高阶重构,非定常时间推进采用含牛顿型LUSGS子迭代的全隐式双时间步方法。为实施旋转运动和便于捕捉尾迹,计算采用运动重叠网格技术。计算得到的桨叶表面压力分布及桨尖涡涡核位置都与实验结果吻合较好。数值结果表明:所发展方法对桨尖涡具有较高的分辨率,对激波具有较好的捕捉能力,该方法可进一步推广到前飞旋翼粘性绕流的计算。     

Implicit application of non‐reflective boundary conditions for Navier–Stokes equations in generalized coordinates

The non‐reflective boundary conditions (NRBC) for Navier–Stokes equations originally suggested by Poinsot and Lele (J. Comput. Phys. 1992; 101 :104–129) in Cartesian coordinates are extended to generalized coordinates. The characteristic form Navier–Stokes equations in conservative variables are given. In this characteristic‐based method, the NRBC is implicitly coupled with the Navier–Stokes flow solver and are solved simultaneously with the flow solver. The calculations are conducted for a subsonic vortex propagating flow and the steady and unsteady transonic inlet‐diffuser flows. The results indicate that the present method is accurate and robust, and the NRBC are essential for unsteady flow calculations. Copyright © 2005 John Wiley & Sons, Ltd.     

A simple phase transition relaxation solver for liquid–vapor flows

Determining liquid–vapor phase equilibrium is often required in multiphase flow computations. Existing equilibrium solvers are either accurate but computationally expensive or cheap but inaccurate. The present paper aims at building a fast and accurate specific phase equilibrium solver, specifically devoted to unsteady multiphase flow computations. Moreover, the solver is efficient at phase diagram bounds, where non‐equilibrium pure liquid and pure gas are present. It is systematically validated against solutions based on an accurate (but expensive) solver. Its capability to deal with cavitating, evaporating, and condensing two‐phase flows is highlighted on severe test problems both 1D and 2D. Copyright © 2016 John Wiley & Sons, Ltd.     

An implicit high-order preconditioned flux reconstruction method for low-Mach-number flow simulation with dynamic meshes

A fully implicit high-order preconditioned flux reconstruction/correction procedure via reconstruction (FR/CPR) method is developed to solve the compressible Navier-Stokes equations at low Mach numbers. A dual-time stepping approach with the second-order backward differentiation formula (BDF2) is employed to ensure temporal accuracy for unsteady flow simulation. When dynamic meshes are used to handle moving/deforming domains, the geometric conservation law is implicitly enforced to eliminate errors due to the resolution discrepancy between BDF2 and the spatial FR/CPR discretization. The large linear system resulted from the spatial and temporal discretizations is tackled with the restarted generalized minimal residual solver in the PETSc (portable, extensible toolkit for scientific computation) library. Through several benchmark steady and unsteady numerical tests, the preconditioned FR/CPR methods have demonstrated good convergence and accuracy for simulating flows at low Mach numbers. The new flow solver is then used to study the effects of Mach number on unsteady force generation over a plunging airfoil when operating in low-Mach-number flows. It is observed that weak compressibility has a significant impact on thrust generation but has a negligible effect on lift generation of an oscillating airfoil.