On the immersed boundary‐lattice Boltzmann simulations of incompressible flows with freely moving objects

For simulating freely moving problems, conventional immersed boundary‐lattice Boltzmann methods encounter two major difficulties of an extremely large flow domain and the incompressible limit. To remove these two difficulties, this work proposes an immersed boundary‐lattice Boltzmann flux solver (IB‐LBFS) in the arbitrary Lagragian–Eulerian (ALE) coordinates and establishes a dynamic similarity theory. In the ALE‐based IB‐LBFS, the flow filed is obtained by using the LBFS on a moving Cartesian mesh, and the no‐slip boundary condition is implemented by using the boundary condition‐enforced immersed boundary method. The velocity of the Cartesian mesh is set the same as the translational velocity of the freely moving object so that there is no relative motion between the plate center and the mesh. This enables the ALE‐based IB‐LBFS to study flows with a freely moving object in a large open flow domain. By normalizing the governing equations for the flow domain and the motion of rigid body, six non‐dimensional parameters are derived and maintained to be the same in both physical systems and the lattice Boltzmann framework. This similarity algorithm enables the lattice Boltzmann equation‐based solver to study a general freely moving problem within the incompressible limit. The proposed solver and dynamic similarity theory have been successfully validated by simulating the flow around an in‐line oscillating cylinder, single particle sedimentation, and flows with a freely falling plate. The obtained results agree well with both numerical and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

Simulation of liquid sloshing in curved‐wall containers with arbitrary Lagrangian–Eulerian method

There are many challenges in the numerical simulation of liquid sloshing in horizontal cylinders and spherical containers using the finite element method of arbitrary Lagrangian–Eulerian (ALE) formulation: tracking the motion of the free surface with the contact points, defining the mesh velocity on the curved wall boundary and updating the computational mesh. In order to keep the contact points slipping along the curved side wall, the shape vector in each time advancement is defined to modify the kinematical boundary conditions on the free surface. A special function is introduced to automatically smooth the nodal velocities on the curved wall boundary based on the liquid nodal velocities. The elliptic partial differential equation with Dirichlet boundary conditions can directly rezone the inner nodal velocities in more than a single freedom. The incremental fractional step method is introduced to solve the finite element liquid equations. The numerical results that stemmed from the algorithm show good agreement with experimental phenomena, which demonstrates that the ALE method provides an efficient computing scheme in moving curved wall boundaries. This method can be extended to 3D cases by improving the technique to compute the shape vector. Copyright © 2007 John Wiley & Sons, Ltd.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.     

Provably stable and time‐accurate extensions of Runge–Kutta schemes for CFD computations on moving grids

Extending fixed‐grid time integration schemes for unsteady CFD applications to moving grids, while formally preserving their numerical stability and time accuracy properties, is a nontrivial task. A general computational framework for constructing stability‐preserving ALE extensions of Eulerian multistep time integration schemes can be found in the literature. A complementary framework for designing accuracy‐preserving ALE extensions of such schemes is also available. However, the application of neither of these two computational frameworks to a multistage method such as a Runge–Kutta (RK) scheme is straightforward. Yet, the RK methods are an important family of explicit and implicit schemes for the approximation of solutions of ordinary differential equations in general and a popular one in CFD applications. This paper presents a methodology for filling this gap. It also applies it to the design of ALE extensions of fixed‐grid explicit and implicit second‐order time‐accurate RK (RK2) methods. To this end, it presents the discrete geometric conservation law associated with ALE RK2 schemes and a method for enforcing it. It also proves, in the context of the nonlinear scalar conservation law, that satisfying this discrete geometric conservation law is a necessary and sufficient condition for a proposed ALE extension of an RK2 scheme to preserve on moving grids the nonlinear stability properties of its fixed‐grid counterpart. All theoretical findings reported in this paper are illustrated with the ALE solution of inviscid and viscous unsteady, nonlinear flow problems associated with vibrations of the AGARD Wing 445.6. Copyright © 2011 John Wiley & Sons, Ltd.     

Developing a unified FVE‐ALE approach to solve unsteady fluid flow with moving boundaries

In this study, an arbitrary Lagrangian–Eulerian (ALE) approach is incorporated with a mixed finite‐volume–element (FVE) method to establish a novel moving boundary method for simulating unsteady incompressible flow on non‐stationary meshes. The method collects the advantages of both finite‐volume and finite‐element (FE) methods as well as the ALE approach in a unified algorithm. In this regard, the convection terms are treated at the cell faces using a physical‐influence upwinding scheme, while the diffusion terms are treated using bilinear FE shape functions. On the other hand, the performance of ALE approach is improved by using the Laplace method to improve the hybrid grids, involving triangular and quadrilateral elements, either partially or entirely. The use of hybrid FE grids facilitates this achievement. To show the robustness of the unified algorithm, we examine both the first‐ and the second‐order temporal stencils. The accuracy and performance of the extended method are evaluated via simulating the unsteady flow fields around a fixed cylinder, a transversely oscillating cylinder, and in a channel with an indented wall. The numerical results presented demonstrate significant accuracy benefits for the new hybrid method on coarse meshes and where large time steps are taken. Of importance, the current method yields the second‐order temporal accuracy when the second‐order stencil is used to discretize the unsteady terms. Copyright © 2009 John Wiley & Sons, Ltd.     

An accurate finite element scheme with moving meshes for computing 3D‐axisymmetric interface flows

An accurate finite element scheme for computing 3D‐axisymmetric incompressible free surface and interface flows is proposed. It is based on the arbitrary Lagrangian Eulerian (ALE) approach using free surface/interface‐resolved moving meshes. Key features like the surface force, consisting of surface tension and the local curvature, and jumps in the density and viscosity over different fluid phases are precisely incorporated in the finite element formulation. The local curvature is approximated by using the Laplace–Beltrami operator technique combined with a boundary approximation by isoparametric finite elements. A new approach is used to derive the 3D‐axisymmetric form from the variational form in 3D‐Cartesian coordinates. Several test examples show the high accuracy and the robustness of the proposed scheme. Copyright © 2007 John Wiley & Sons, Ltd.     

The characteristic‐based split (CBS) meshfree method for free surface flow problems in ALE formulation

A semi‐implicit characteristic‐based split (CBS) meshfree algorithm in the arbitrary Lagrangian Eulerian (ALE) framework is proposed for the numerical solution of incompressible free surface flow problem in the paper. The algorithm is the extension of general CBS method which was initially introduced in finite element framework, this is due to the fact that CBS method not only can enhance the stability, but also avoid LBB condition when equal order basis function is used to approximate velocity and pressure variables. Meanwhile, a simple way for node update and node speed calculation is developed which is used to capture the free surface exactly. The numerical solutions are compared with available analytical and numerical solutions, which shows that the proposed method has better ability to simulate the free surface incompressible flow problem. Copyright © 2009 John Wiley & Sons, Ltd.     

An improved MUSCL treatment for the SPH‐ALE method: comparison with the standard SPH method for the jet impingement case

In the present work, a new implementation of the Monotone Upwind‐centered Scheme for Conservation Laws (MUSCL) ‐ Hancock scheme has been developed for the SPH‐Arbitrary Lagrangian Eulerian (ALE) method. The resulting method was tested at various benchmark cases and then it was used to simulate the jet impingement on a flat plate for several different impingement angles, in comparison with the standard SPH method and results from literature. The SPH‐ALE method proves to produce higher quality results than the standard SPH method in all cases, while the MUSCL treatment tends to remedy the issues of the numerical viscosity, inherent to the method, up to a point. Copyright © 2012 John Wiley & Sons, Ltd.     

成型充填过程的ALE有限元模拟

在ALE框架中提出了一个用于成型充填过程有限元数值模拟的模型。应用ALE参考构形及ALE参考粒子速度描写充填过程中的熔体质量运动。摒弃了Hele-Shaw近似假定,因而所提出的模型能用于非薄壁型腔中高分子材料充填过程的数值模拟。应用基于时域分步算法的Taylor-Galerkin方法,对控制成型充填过程的守恒方程建立了弱形式。对移动自由面附近的充填材料区构造了网格生成算法与网格重划分方案。给出了在几种不同形状的典型腔体中充填过程的数值模拟结果,表明了所提出的ALE有限元模型模拟充填过程的有效性。     

Bubble collapse in compressible fluids using a spectral element marker particle method. Part 1. Newtonian fluids

This paper is concerned with the development of a high‐order numerical scheme for the modelling of two‐phase Newtonian flows. The companion paper, herein referred to as Part 2, extends the scheme to two‐phase viscoelastic flows. The particular problem of the collapse of a two‐dimensional bubble in the vicinity of a rigid boundary is considered. The governing equations are discretized using the spectral element method, and the two phases are modelled using a marker particle method. The marker particle scheme is validated using the Zalesak slotted disk rotation test problem. A comprehensive set of results is presented for the problem of bubble collapse near a rigid wall, and qualitative agreement is obtained with other numerical studies and experimental observations. Viscous effects are shown to inhibit bubble collapse and prevent jet formation and are therefore likely to have a mitigating effect on cavitation damage.Copyright © 2011 John Wiley & Sons, Ltd.     

A finite element formulation satisfying the discrete geometric conservation law based on averaged Jacobians

In this article, a new methodology for developing discrete geometric conservation law (DGCL) compliant formulations is presented. It is carried out in the context of the finite element method for general advective–diffusive systems on moving domains using an ALE scheme. There is an extensive literature about the impact of DGCL compliance on the stability and precision of time integration methods. In those articles, it has been proved that satisfying the DGCL is a necessary and sufficient condition for any ALE scheme to maintain on moving grids the nonlinear stability properties of its fixed‐grid counterpart. However, only a few works proposed a methodology for obtaining a compliant scheme. In this work, a DGCL compliant scheme based on an averaged ALE Jacobians formulation is obtained. This new formulation is applied to the θ family of time integration methods. In addition, an extension to the three‐point backward difference formula is given. With the aim to validate the averaged ALE Jacobians formulation, a set of numerical tests are performed. These tests include 2D and 3D diffusion problems with different mesh movements and the 2D compressible Navier–Stokes equations. Copyright © 2011 John Wiley & Sons, Ltd.     

微重环境中三维液体非线性晃动的数值模拟

将ALE（任意的拉格朗日-欧拉）运动学描述关系引入到Navier-Stokes方程中,在时间域上采用分步离散方法中的速度修正格式,利用Galerkin加权余量方法推导了系统的有限元数值离散方程;推导了考虑表面张力效应时有限元边界件的弱积分形式。模拟了考虑表面张力情况下圆筒形贮腔中液体的非线性晃动,揭示了考虑表面张力效应时液体非线性晃动的重要特征。     

三维液体非线性晃动及其复杂现象

主要讨论三维液体非线性晃动问题 。将ALE（任意的拉格朗日-欧拉）运动学描述引人到Navier-Stokes方程的分步有限元计算格式中;在时间域上采用分步离散方法中的速度修正格式,利用Galerkin加权余量方法得到了系统的有限元离散方程;推导了考虑表面张力效应时有限元边界条件的弱积分形式;模拟了三维液体的非线性晃动问题,得到了一系列三维液体非线性晃动的复杂现象.进一步模拟了考虑表面张力效应以及在微重力环境下三维液体的非线性晃动,揭示了考虑表面张力效应以及在微重力环境下液体非线性晃动的重要特征.井将所得结论与现有的实验结果进行了比较.从而证实了该方法的有效性与正确性.     

High‐order compact finite difference schemes for the vorticity–divergence representation of the spherical shallow water equations

This work is devoted to the application of the super compact finite difference method (SCFDM) and the combined compact finite difference method (CCFDM) for spatial differencing of the spherical shallow water equations in terms of vorticity, divergence, and height. The fourth‐order compact, the sixth‐order and eighth‐order SCFDM, and the sixth‐order and eighth‐order CCFDM schemes are used for the spatial differencing. To advance the solution in time, a semi‐implicit Runge–Kutta method is used. In addition, to control the nonlinear instability, an eighth‐order compact spatial filter is employed. For the numerical solution of the elliptic equations in the problem, a direct hybrid method, which consists of a high‐order compact scheme for spatial differencing in the latitude coordinate and a fast Fourier transform in longitude coordinate, is utilized. The accuracy and convergence rate for all methods are verified against exact analytical solutions. Qualitative and quantitative assessments of the results for an unstable barotropic mid‐latitude zonal jet employed as an initial condition are addressed. It is revealed that the sixth‐order and eighth‐order CCFDMs and SCFDMs lead to a remarkable improvement of the solution over the fourth‐order compact method. Copyright © 2015 John Wiley & Sons, Ltd.     

A Petrov–Galerkin finite element model for one‐dimensional fully non‐linear and weakly dispersive wave propagation

A new finite element method is presented to solve one‐dimensional depth‐integrated equations for fully non‐linear and weakly dispersive waves. For spatial integration, the Petrov–Galerkin weighted residual method is used. The weak forms of the governing equations are arranged in such a way that the shape functions can be piecewise linear, while the weighting functions are piecewise cubic with C²‐continuity. For the time integration an implicit predictor–corrector iterative scheme is employed. Within the framework of linear theory, the accuracy of the scheme is discussed by considering the truncation error at a node. The leading truncation error is fourth‐order in terms of element size. Numerical stability of the scheme is also investigated. If the Courant number is less than 0.5, the scheme is unconditionally stable. By increasing the number of iterations and/or decreasing the element size, the stability characteristics are improved significantly. Both Dirichlet boundary condition (for incident waves) and Neumann boundary condition (for a reflecting wall) are implemented. Several examples are presented to demonstrate the range of applicabilities and the accuracy of the model. Copyright © 2001 John Wiley & Sons, Ltd.     

贮腔类三维自由液面动力学问题数值研究

讨论了贮腔类三维自由液面动力学问题的数值研究,将任意的拉格朗日-欧拉运动学描述关系引入到系统的控制方程中,采用任意的拉格朗日-欧拉描述跟踪自由液面,推导了自由面上结点的法向矢量计算公式。采用Galerkin余量法推导了Navier-Stokes方程的空间离散有限元方程,采用三维自由液面上微分几何理论推导了表面张力计算公式。数值研究中考虑了接触角效应,最后进行了三维数值算例分析。     

楔形体入水时域解的复边界元数值分析

基于速度势理论,利用复数变量边界元法对二维楔形体常速入水冲击的时域解进行了数值研究。 以相似解作为数值计算的初始条件,采用时域解射流线性近似处理方法,利用复数变量边界元法进行求解,以 减少计算量和数值误差。深入讨论了扩展坐标系求时域解、射流处理、网格划分和网格更新等关键技术。最 后数值计算了不同斜升角楔形体入水时的自由液面隆起、射流飞溅和压力分布,经与相似解结果作比较,自由 液面隆起轮廓基本吻合,而压力分布更符合实际情况,从而证明了模型及分析方法的正确性。     

Prediction of extrudate swell in polymer melt extrusion using an Arbitrary Lagrangian Eulerian (ALE) based finite element method

Accurate prediction of extrudate (die) swell in polymer melt extrusion is important as this helps in appropriate die design for profile extrusion applications. Extrudate swell prediction has shown significant difficulties due to two key reasons. The first is the appropriate representation of the constitutive behavior of the polymer melt. The second is regarding the simulation of the free surface, which requires special techniques in the traditionally used Eulerian framework. In this paper we propose a method for simulation of extrudate swell using an Arbitrary Lagrangian Eulerian (ALE) technique based finite element formulation. The ALE technique provides advantages of both Lagrangian and Eulerian frameworks by allowing the computational mesh to move in an arbitrary manner, independent of the material motion. In the present method, a fractional-step ALE technique is employed in which the Lagrangian phase of material motion and convection arising out of mesh motion are decoupled. In the first step, the relevant flow and constitutive equations are solved in Lagrangian framework. The simpler representation of polymer constitutive equations in a Lagrangian framework avoids the difficulties associated with convective terms thereby resulting in a robust numerical formulation besides allowing for natural evolution of the free surface with the flow. In the second step, mesh is moved in ALE mode and the associated convection of the variables due to relative motion of the mesh is performed using a Godunov type scheme. While the mesh is fixed in space in the die region, the nodal points of the mesh on the extrudate free surface are allowed to move normal to flow direction with special rules to facilitate the simulation of swell. A differential exponential Phan Thien Tanner (PTT) model is used to represent the constitutive behavior of the melt. Using this method we simulate extrudate swell in planar and axisymmetric extrusion with abrupt contraction ahead of the die exit. This geometry allows the extrudate to have significant memory for shorter die lengths and acts as a good test for swell predictions. We demonstrate that our predictions of extrudate swell match well with reported experimental and numerical simulations.     

An ALE mesh movement scheme for long‐term in‐flight ice accretion

The rather irregular shapes that glaze ice may grow into while accreting over the surface of an aircraft represent a major difficulty in the numerical simulation of long periods of in‐flight icing. There is a constant need for remeshing: a wasteful procedure. In the framework of ALE formulations, a mesh movement scheme is presented, in which frame and elasticity analogies are loosely coupled. The resulting deformed mesh preserves the quality of elements, especially in the near‐wall region, where accurate prediction of heat flux and shear stresses is required. The proposed scheme handles mesh deformation in a computationally efficient manner by localizing the mesh deformation. The 2D problem of ice accretion over single and multi‐element airfoils is considered here as a numerical experiment. Experimentally measured glaze ice shapes were used to evaluate the performance of the present approach. Copyright © 2011 John Wiley & Sons, Ltd.     

High‐order compact scheme for Boussinesq equations: implementation and numerical boundary condition issue

Application of the three‐point fourth‐order compact scheme to spatial differencing of the vorticity‐stream function‐density formulation of the two‐dimensional incompressible Boussinesq equations is presented. The details for the derivation of difference relations at boundaries to generate accurate and stable solutions are also given. To assess the numerical accuracy, two linear prototype test problems with known exact solution are used. The two‐dimensional planar and cylindrical lock‐exchange flow configurations are used to conduct the numerical experiments for the Boussinesq equations. Quantitative measures for the two linear prototype test problems and comparison of the results of this work with the published results for the planar lock‐exchange flow indicates the validity and accuracy of the three‐point fourth‐order compact scheme for numerical solution of two‐dimensional incompressible Boussinesq equations. In addition, the study of using different high‐order numerical boundary conditions for the implementation of the no‐penetration boundary condition for the density at no‐slip walls is considered. It is shown that the numerical solution is sensitive to the choice of difference relation for the density at boundaries and using an inappropriate difference relation leads to spurious numerical solution. Copyright © 2011 John Wiley & Sons, Ltd.