冲击扭矩作用下碳纳米管动力屈曲的研究

为了研究碳纳米管在冲击扭矩作用下的动力屈曲,采用了连续模型将碳纳米管模拟成半无限长的弹性连续圆柱壳。将冲击扭矩作用下碳纳米管的动力屈曲问题归结为由于扭转应力波传播导致的分叉问题,此分叉问题被化为一个非线性方程组的求解。最后进行了数值分析,讨论了碳纳米管的不同参数对动力屈曲的影响,发现碳纳米管有极强的抗冲击性,临界屈曲剪应力可高达几百吉帕。     

受轴向冲击有限长弹性直杆中应力波引起的分叉问题

研究了有限长理想直杆受阶跃载荷作用的弹性动力屈曲问题。将直杆的屈问题归结为由轴向应力波传播而导致的杆的分叉问题，并考虑了应力波反射的影响。给出了分叉发生的临界条件并对具体实例进行了计算。最后对阶跃载荷及脉冲载荷对杆的动力屈曲的影响进行了讨论。     

黏弹性圆柱形壳动力学高余维分岔、普适开折问题

讨论两端受到谐波激励的黏弹性圆柱形壳的非线性动力学行为,利用奇异性理论,研究了分岔方程的普适开折问题,严格证明了它是一个高余维分岔问题。余维数为5（含有一个模参数）,给出了它的所有可能的普适开折形式。在分岔参数满足某些条件时得到该分岔问题的转迁集及分岔图,展示了一些新的动力学行为,改进和完善了奇异性分析方法。     

The bifurcation problem of columns caused by elastic-plastic stress wave propagation

In this paper, the dynamic buckling of an elastic-plastic column is studied. Let its dynamic buckling under step load be reduced to a bifurcation problem caused by the propagation of axial elastic-plastic stress wave. The critical buckling condition is given and the reflection of the elastic-plastic stress wave is taken into consideration. In the end, numerical computation and conclusions are presented and obtained. Foundation item: the National Natural Science Foundation of China (19672038)     

弹性圆柱壳在轴向应力波传播过程中的非对称屈曲

讨论弹性圆柱壳端部受冲击载荷作用，在应力波传播过程中的非对称屈曲问题。通过求解扰动方程得到了动态屈曲的分叉条件、临界载荷和屈曲模态。数值结果表明，当壳壁厚不很薄时，轴对称屈曲临界载荷比非对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低。不同的冲击载荷，屈曲模态也将不同。     

轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

Creep buckling and postbuckling of circular cylindrical shells under axial compression

An infinitely long, axially compressed, circular cylindrical shell with an imperfection in the shape of the axisymmetric classical buckling mode, undergoing steady or non-steady creep, is analyzed. The axisymmetric problem is solved incrementally using nonlinear shell equations The ratio of the applied stress to the classical buckling stress determines if the shell will collapse axisymmetrically or if it will bifurcate into a nonaxisymmetric mode, and whether or not bifurcation will result in instantaneous collapse. The bifurcation problem is formulated exactly and the initial postbuckling behavior is investigated via an asymptotic elastic analysis, based on Koiter's general theory Numerical results are compared with available experimental data.     

Buckling modes of a compressed plate on an elastic substrate

The buckling modes of a homogeneously compressed elastic plate on a soft elastic substrate are studied. The critical compression is uniquely determined by the bifurcation equation, but this compression is associated with a wide set of buckling modes. It was proved that any solution of the Helmholtz equation satisfies the bifurcation equation. At the same time, in microelectronics, it is required to know which buckling mode is realized. Experimental and theoretical investigations show that the chessboard-like buckling mode should be expected. In what follows, this problem is discussed theoretically. The expected buckling mode can be found by analyzing the energy of the initial postcritical deformation, and the desired mode is determined from the condition of its minimum. The analytic expression of this energy is obtained. Its minimization results in the chessboard-like buckling mode.     

理想直杆中轴向应力波的传播和反射导致的分叉问题

对阶跃载荷作用下弹性理想完善直杆中应力波的传播及其反射引起民的分叉问题进行了理论分析和数值计算，讨论了此类动力屈曲问题中横向惯性效应的影响；给出了一种进行后分叉分析的近似方法，得到了一些结论，在各类结构由于应力波的传播及反射引起的分叉问题具有指导意义。     

Bifurcation and universal unfolding for a rotating shaft with unsymmetrical stiffness

The 1/2 subharmonic resonance bifurcation and universal unfolding are studied for a rotating shaft with unsymmetrical stiffness. The bifurcation behavior of the response amplitude with respect to the detuning parameter was studied for this class of problems by Xiao et al. Obviously, it is highly important to research the bifurcation behavior of the response amplitude with respect to the unsymmetry of stiffness for this problem. Here, by means of the singularity theory, the bifurcation and universal unfolding of amplitude with respect to the unsymmetrical stiffness parameter are discussed. The results indicate that it is a high codimensional bifurcation problem with codimension 5, and the universal unfolding is given. From the mechanical background, we study four forms of two parameter unfoldings contained in the universal unfolding. The transition sets in the parameter plane and the bifurcation diagrams are plotted. The results obtained in this paper show rich bifurcation phenomena and provide some guidance for the analysis and design of dynamic buckling experiments of this class of system, especially, for the choice of system parameters. The project supported by the National Natural Science Foundation of China (19990510), the National Key Basic Research Special Foundation (G1998020316) and Liuhui Center for Applied Mathematics, Nankai University and Tianjin University     

直杆中应力波传播引起的分叉问题

讨论轴向矩形脉冲载荷作用下有限长理想弹性直杆中应力波的传播及其反射引起的分叉问题，讨论此类动力屈曲问题中横向惯性效应的影响；理论分析始终遵循着这样的思路：在分叉的那一瞬间，杆并没有横向惯性效应，目的是给出此类问题的一个合理提法，从理论分析和数值计算中得到了许多重要的结论，理论分析所遵循的思路和所采用的方法对各类结构由于应力波的传播及反射引起的分叉问题具有一定的意义．     

轴向冲击圆柱壳非弹性响应

简要论述承受轴向冲击载荷圆柱壳非弹性动屈曲响应的研究进展。采用Ｋａｒｍａｎ－Ｄｏｎｎｅｌｌ运动方程研究轴向流固冲击载荷作用下的圆柱壳轴对称弹塑性动屈曲问题。本构关系采用增量理论，借助增量数值方法求解动力方程组。研究不同边界条件对屈曲的影响，以及径向外压力在不同边界条件下对屈曲的影响。     

辛方法和弹性圆柱壳在内外压和轴向冲击下的动态屈曲

针对有内压或外压的弹性圆柱壳在轴向冲击载荷耦合作用下的动态屈曲问题,构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法。该方法直接得到非轴对称的屈曲模态。数值结果给出了圆柱壳问题的临界载荷和屈曲模态以及一些规律。     

弹性圆柱壳冲击扭转屈曲的突变模型

本文将突变理论用于处理冲击载荷下弹性结构的屈曲问题,文中建立了结构冲击屈曲的突变准则,认为临界阶跃载荷位于所提出突变系统的分叉集之中,并由此对两端固支的弹性圆柱壳扭转屈曲进行了分析,给出了不同初缺陷时的临界阶跃扭矩计算公式,通过对临界静态扭矩的计算,表明临界阶跃扭矩小于临界静态扭矩.     

A catastrophe model for the impact torsional buckling of elastic cylindrical shell

The catastrophe theory is used to study the impact buckling of elastic structures. A criterion for impact buckling is established based on the proposed catastrophe system, in whose bifurcation set the critical step load is located. By the present theory, the impact torsional buckling for a clamped cylindrical shell is studied and the critical step torques for different imperfections are given. Also, the static critical torque is given, and it is shown that the critical step torque is smaller than the critical static torque.The project is supported by National Natural Science Foundation of China     

Impact bifurcation of semi-infinite elastic thin bars

The dynamic buckling problem of elastic bars subjected to axial impact has been investigated by many authors in different ways. In this paper the problem, in which the elastic bars are assumed to be ideally straight, is reformulated in connection with the bifurcation due to the stress wave propagation. The example of a semi-infinite elastic bar is used for illustration.     

Comparisons of test and theory for nonsymmetric elastic-plastic buckling of shells of revolution

Experimental and analytical buckling pressures are presented for very carefully fabricated thin cylindrical shells with 45, 60 and 75° conical heads and for cylindrical shells with torispherical heads pierced by axisymmetric cylindrical nozzles of various thicknesses and diameters. Nonsymmetric buckling occurs at pressures for which some of the material is loading plastically in the neighborhoods of stress concentrations caused by meridional slope discontinuities. The buckling pressures for the cone-cylinder vessels are predicted within 2.6 per cent and for the pierced torispherical vessels within 4.4 per cent with use of BOSOR5, a computer program based on the finite difference energy method in which axisymmetric large deflections, nonlinear material properties and nonsymmetric bifurcation buckling are accounted for. The predicted buckling pressures of the pierced torispherical specimens are rather sensitive to details of the analytical model in the neighborhood of the juncture between the nozzle and the head. The buckling pressures of the cone-cylinder vessels can be accurately predicted by treatment of the wall material as elastic, enforcement of the full compatibility conditions at the juncture in the prebuckling analysis, and release of the rotation compatibility condition in the bifurcation (eigenvalue) analysis.     

Nonlinear stability of thin elastic cylinders of different length under global bending

Many thin-walled cylindrical shells are used in structural applications in which the dominant loading condition is global bending. Key examples include chimneys, wind turbine support towers, pipelines, horizontal tanks, tubular piles and silos. The buckling behaviour of these structures in bending is complex due to the coupling between cross-section ovalisation and local bifurcation buckling. Analytical treatments of this problem have a history going back almost a century and still constitute an active and challenging research area.This paper investigates in detail the effect of cylinder length on the nonlinear elastic buckling behaviour of clamped cylindrical tubes under global bending, covering a very wide range of lengths. It is found that the behaviour may be classified into four distinct length-dependent domains with clearly-defined boundaries which have here been assigned the names ‘short’, ‘medium’, ‘transitional’ and ‘long’. Algebraic characterisations of the computed nonlinear moment–length relationships are proposed for design purposes.     

有限长圆柱壳受径向冲击的塑性动力屈曲分析

讨论两端固定的圆柱薄壳在均布外部冲击下的塑性动力屈曲。依据实验现象对位移场作出假设，用扰动法求得屈曲的扰动控制方程组，降阶后用标准的龙格库塔法进行数值求解。其中物理关系采用Ｌｅｖｙ－Ｍｉｓｅｓ流动理论，材料为刚线性强化模型。计算结果同Ｆｌｏｒｅｎｃｅ等的Ｂｅｓｓｅｌ函数解作了比较，对边界对屈曲的影响作了讨论。本文的结果对潜艇抗水下爆炸的研究有重要意义。