弹性圆柱壳在轴向应力波传播过程中的非对称屈曲

讨论弹性圆柱壳端部受冲击载荷作用，在应力波传播过程中的非对称屈曲问题。通过求解扰动方程得到了动态屈曲的分叉条件、临界载荷和屈曲模态。数值结果表明，当壳壁厚不很薄时，轴对称屈曲临界载荷比非对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低。不同的冲击载荷，屈曲模态也将不同。     

辛方法和弹性圆柱壳在内外压和轴向冲击下的动态屈曲

针对有内压或外压的弹性圆柱壳在轴向冲击载荷耦合作用下的动态屈曲问题,构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法。该方法直接得到非轴对称的屈曲模态。数值结果给出了圆柱壳问题的临界载荷和屈曲模态以及一些规律。     

轴向瞬间阶梯载荷下圆柱壳动力屈曲的双特征参数分析

对于轴向瞬间阶梯载荷下圆柱壳的弹性非轴对称动力屈曲问题，将临界应力和屈曲惯性项指数参数作为双特征参数求解。由能量转换和守恒准则，导出压缩波阵面上的屈曲变形附加约束条件。失稳控制方程、边界条件和波阵面上的连续条件，连同此附加约束条件构成求解两个特征参数和动力失稳模态的完备定解条件。由伽辽金法得出求解双特征参数问题的数值方法。     

弹塑性梁在轴向应力波下的动态屈曲

本文考虑轴向应力波效应，利用分叉理论研究各种支承半无限长弹塑性梁的动态屈曲问题。在轴向阶梯载荷和脉冲载荷冲击下得到了梁的临界屈曲载荷及初始屈曲模态。其结果与实验现象相一致。同时也为研究结构动态屈曲问题提供了有效途径。     

轴向冲击载荷作用下弹性圆柱壳横向弯曲动态屈曲

研究在轴向冲击载荷下弹性圆柱壳动态屈曲问题.通过构造哈密顿体系,在辛空间中将临界载荷和动态屈曲模态归结为辛本征值和本征解问题.辛本征解反映了局部的压缩屈曲模态和整体的弯曲屈曲模态,特别是在冲击端为自由支承边界时的特殊屈曲方式.数值结果给出了具体的临界载荷和屈曲模态规律.     

辛方法在弹性圆板屈曲问题中的应用

在辛几何空间中将临界载荷和屈曲模态归结为辛本征值和本征解问题,从而形成一种辛方法.研究和讨论了轴对称屈曲和非轴对称屈曲问题,它们分别属于零本征值问题和非零本征值问题.以弹性圆板屈曲问题作为研究对象,借助于系统的能量构造出哈密顿体系,得到了该体系下的所有的本征解.数值结果给出了圆板和圆环板问题的临界载荷和屈曲模态.数值结果表明:对应低阶屈曲模态的临界载荷相对较小且屈曲模态在周向的波纹数也较少,说明在屈曲过程中低阶屈曲模态容易出现,特别是轴对称屈曲更容易发生;对应较大分支数的临界载荷,其值相对较大且屈曲模态在径向的波纹更加复杂;同时物理常数和几何参数也会直接影响临界载荷的大小.     

冲击载荷作用下矩形薄板的弹性动力屈曲

为了研究冲击载荷作用下考虑应力波效应弹性矩形薄板的动力屈曲,根据动力屈曲发生瞬间的能量转换和守恒准则,导出板的屈曲控制方程和波阵面上的补充约束条件,真实的屈曲位移应同时满足控制方程和波阵面上的附加约束条件。满足上述条件,建立了该问题的完整数值解法,对屈曲过程中冲击载荷、屈曲模态和临界屈曲长度之间的关系进行研究,定量计算了横向惯性效应对提高薄板动力屈曲临界应力的贡献。研究表明:板的厚宽比一定时,临界屈曲长度随冲击载荷的增大而减小;由于屈曲时的横向惯性效应,应力波作用下薄板一阶临界力参数是相应边界板的静力失稳临界力参数的1.5倍;随着边界约束逐渐减弱,板临界力参数逐渐减小,动力特征参数逐渐增大。     

受轴向冲击圆柱壳的塑性动力屈曲研究

令屈曲模态同时包含轴向坐标x和环向坐标 ,通过最优模态的分析 ,直接得到各向同性线性强化刚塑性圆柱壳受轴向冲击时发生轴对称屈曲或非轴对称屈曲时的临界速度 ,在此基础上讨论了临界速度与径厚比的关系。     

锥壳的轴压屈曲

依据新的精确的锥壳屈曲分支方程 ,研究承受轴向压力的刚性圆顶夹支截锥壳的稳定性。构造的屈曲模态接近分支点变形。应用 Galerkin法计算了各种截锥比壳体在全锥度的临界特征值、屈曲荷载和临界应力。结果表明 ,轴压屈曲临界应力σcr 随几何参数ν的减小和截锥比λ的增大而减小。     

面内阶跃载荷下矩形薄板的塑性动力屈曲

对于面内阶跃载荷作用下矩形薄板的塑性动力屈曲问题,将临界应力和屈曲惯性项指数参数作为双特征参数求解。由相邻平衡准则导出失稳控制方程,由动力屈曲发生瞬间的能量转换和守恒准则,导出波阵面上的屈曲变形补充约束条件。失稳控制方程、边界条件、塑性波阵面上的连续条件和补充约束条件构成了定量求解两个特征参数和动力屈曲模态的完备条件。研究了矩形薄板塑性动力屈曲过程中板的厚宽比、冲击载荷大小、屈曲模态和临界屈曲长度之间的关系。     

对称线布载荷作用下圆底扁球壳的大挠度问题

本文研究对称线布载荷作用下圆底扁球壳的轴对称非线性弯曲和稳定性,讨论了当几何参数固定而载荷位置发生变化吋壳体的屈曲行为,以及当载荷作用位置固定而几何参数发生变化时壳体的屈曲行为,分析了屈曲模式对临界载荷的影响,并就ν=0.3的情形给出了数值结果。     

Axisymmetric compressive buckling of multi-walled carbon nanotubes under different boundary conditions

The paper studies the axisymmetric compressive buckling behavior of multi-walled carbon nanotubes (MWNTs) under different boundary conditions based on continuum mechanics model. A buckling condition is derived for determining the critical buckling load and associated buckling mode of MWNTs, and numerical results are worked out for MWNTs with different aspect ratios under fixed and simply supported boundary conditions. It is shown that the critical buckling load of MWNTs is insensitive to boundary conditions, except for nanotubes with smaller radii and very small aspect ratio. The associated buckling modes for different layers of MWNTs are in-phase, and the buckling displacement ratios for different layers are independent of the boundary conditions and the length of MWNTs. Moreover, for simply supported boundary conditions, the critical buckling load is compared with the corresponding one for axial compressive buckling, which indicates that the critical buckling load for axial compressive buckling can be well approximated by the corresponding one for axisymmetric compressive buckling. In particular, for axial compressive buckling of double-walled carbon nanotubes, an analytical expression is given for approximating the critical buckling load. The present investigation may be of some help in further understanding the mechanical properties of MWNTs.     

含轴对称初始缺陷的具有正交各向异性表层的夹层圆柱壳的非线性屈曲

夹层圆柱壳具有很高的结构效能。在许多工程结构中被广泛采用。本文研究分析了含有轴对称初始缺陷的夹层圆柱壳在轴压下的非线性屈曲问题。该夹层壳具有正交各向异性表层和各向同性可承剪的夹心．利用Stein的前屈曲一致理论得出了前屈曲挠度随轴向载荷及缺陷参数的变化情况，运用Galerkin法导出了屈曲控制方程，并进行了数值计算，得到了屈曲载荷、缺陷幅值、缺陷波数、夹心模量等参量之间的关系．结果表明与壳体实际屈曲模态相同的初始缺陷具有很大的危害性，可以通过增加壳体表层的轴向弹性模量或优化夹心的有关参数等途径来提高屈曲载荷，改善壳体屈曲性能。     

Axisymmetric static and dynamic buckling of hollow microspheres

Syntactic foams are particulate composites that are obtained by dispersing thin hollow inclusions in a matrix material. The wide spectrum of applications of these composites in naval and aerospace structures has fostered a multitude of theoretical, numerical, and experimental studies on the mechanical behavior of syntactic foams and their constituents. In this work, we study static and dynamic axisymmetric buckling of single hollow spherical particles modeled as non-linear thin shells. Specifically, we compare theoretical predictions obtained by using Donnell, Sanders–Koiter, and Teng–Hong non-linear shell theories. The equations of motion of the particle are obtained from Hamilton׳s principle, and the Galerkin method is used to formulate a tractable non-linear system of coupled ordinary differential equations. An iterative solution procedure based on the modified Newton–Raphson method is developed to estimate the critical static load of the microballoon, and alternative methodologies of reduced complexity are further discussed. For dynamic buckling analysis, a Newmark-type integration scheme is integrated with the modified Newton–Raphson method to evaluate the transient response of the shell. Results are specialized to glass particles, and a parametric study is conducted to investigate the effect of microballoon wall thickness on the predictions of the selected non-linear shell theories. Comparison with finite element predictions demonstrates that Sanders–Koiter theory provides accurate estimates of the static critical load for a wide set of particle wall thicknesses. On the other hand, Donnell and Teng–Hong theories should be considered valid only for very thin particles, with the latter theory generally providing better agreement with finite element findings due to its more complete kinematics. In this context, we also demonstrate that a full non-linear analysis is required when considering thicker shells, while simplified treatment can be utilized for thin particles. For dynamic buckling, we confirm the accuracy of Sanders–Koiter theory for all the considered particle thicknesses and of Teng–Hong and Donnell theories for very thin particles.     

Influence of general imperfections in axially loaded cylindrical shells

The buckling of an axially loaded cylindrical shell is considered when imperfection components corresponding to all of the classical buckling modes are taken into consideration. The analysis represents an extension of Koiter's axisymmetric solution and in the asymptotic sense due to Koiter the imperfections considered are as general as possible. The results obtained reveal many interesting aspects of shell buckling which arize for various imperfection forms. The buckling behaviour which results is associated with both bifurcation and limit point critical states.     

前屈曲应力状态对组合加肋旋转壳失稳临界压力影响的探讨

推导了包含前屈曲弯矩和横剪力的旋转壳弹性稳定性基本方程.运用Riccati传递矩阵法对组合加肋旋转壳算例进行了稳定性分析,并与假设前屈曲状态为薄膜应力状态计算出的失稳临界压力进行了比较.结果表明,前屈曲弯矩和横剪力对组合加肋旋转壳失稳临界压力的影响较小,随着壳板厚度和肋骨尺寸的增大及肋骨间距的缩短,影响略有增大.因而,分析组合加肋旋转壳弹性稳定性时,前屈曲状态采用薄膜应力状态的假设是合理的.     

Mechanical buckling of a functionally graded cylindrical shell with axial and circumferential stiffeners using the third-order shear deformation theory

This paper deals with an analytical approach of the buckling behavior of a functionally graded circular cylindrical shell under axial pressure with external axial and circumferential stiffeners. The shell properties are assumed to vary continuously through the thickness direction. Fundamental relations and equilibrium and stability equations are derived using the third-order shear deformation theory. The resulting equations are employed to obtain the closed-form solution for the critical buckling loads. A simply supported boundary condition is considered for both edges of the shell. The comparison of the results of this study with those in the literature validates the present analysis. The effects of material composition (volume fraction exponent), of the number of stiffeners and of shell geometry parameters on the characteristics of the critical buckling load are described. The analytical results are compared and validated using the finite-element method. The results show that the inhomogeneity parameter, the geometry of the shell and the number of stiffeners considerably affect the critical buckling loads.     

基于弧长法的受压球壳稳定性分析

对受压球壳进行特征值屈曲分析,得到了前6阶屈曲模态及线性屈曲临界载荷;采用弧长法进行非线性有限元分析,对理想球壳施加初始扰动,通过2次扰动值折半的方法求得引起结构屈曲的最小扰动值,追踪到了屈曲分支点和全过程载荷-位移路线。基于前6阶屈曲模态位移,在受压球壳中分别引入2.5mm和1mm两种缺陷值,分析缺陷对球壳屈曲特性的影响。结果表明:取壳厚的0.5%即0.05mm时,得最小扰动值,近似模型与完善结构极值载荷的差值为0.93%;球壳是缺陷敏感性结构,缺陷的幅值和分布都对其极限载荷有影响,缺陷幅值与厚度比为0.1时,缺陷球壳承载力相对理想结构下降了约11%,缺陷幅值与厚度比为0.25时,承载力相对下降了约30%,说明提高球壳稳定性需要提高球壳加工精度。     

Critical velocity of sandwich cylindrical shell under moving internal pressure

Critical velocity of an infinite long sandwich shell under moving internal pressure is studied using the sandwich shell theory and elastodynamics theory. Propagation of axisymmetric free harmonic waves in the sandwich shell is studied using the sandwich shell theory by considering compressibility and transverse shear deformation of the core, and transverse shear deformation of face sheets. Based on the elastodynamics theory, displacement components expanded by Legendre polynomials, and position-dependent elastic constants and densities are introduced into the equations of motion. Critical velocity is the minimum phase velocity on the desperation relation curve obtained by using the two methods. Numerical examples and the finite element （FE） simulations are presented. The results show that the two critical velocities agree well with each other, and two desperation relation curves agree well with each other when the wave number k is relatively small. However, two limit phase velocities approach to the shear wave velocities of the face sheet and the core respectively when k limits to infinite. The two methods are efficient in the investigation of wave propagation in a sandwich cylindrical shell when k is relatively small. The critical velocity predicted in the FE simulations agrees with theoretical prediction.