Buckling of elastic-plastic shells of revolution with discrete elastic-plastic ring stiffeners

The theory is summarized for axisymmetric prebuckling and nonsymmetric bifurcation buckling of ring-stiffened shells of revolution. The analysis is based on finite difference energy minimization in which moderately large meridional rotations, elastic-plastic effects, and primary or secondary creep are included. This theory is implemented in a computer program called BOSOR5, for the analysis of segmented and branched ring-stiffened shells of revolution of multi-material construction.Comparisons between test and theory are given for axisymmetric collapse and nonsymmetric bifurcation buckling of 69 machined ring-stiffened aluminum cylinders submitted to external hydrostatic pressure. Because most of the cylinders fail at an average stress which corresponds to the knee of the stress-strain curve, the analytical predictions are not very sensitive to modeling particulars such as nodal point density or boundary conditions. Agreement between test and theory is improved if the analytical model reflects the fact that the shell and rings intersect over finite axial lenths.     

在轴向应力波传播和反射过程中弹性有限长圆柱壳非对称动态屈曲

本文讨论弹性有限长圆柱壳端部受冲击载荷作用，在轴向应力波传播和反射过程中的非对称动态屈曲问题。通过建立和求解扰动方程得到了动态屈曲的分叉条件，临界载荷和屈曲模态。数值结果表明：当壳壁厚不很薄时，轴对称屈曲临界载荷比非轴对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低；由于应力波的反射，临界载荷降低，因而更容易发生屈曲，屈曲模态也有其不同特点。     

弹性圆柱壳在轴向应力波传播过程中的非对称屈曲

讨论弹性圆柱壳端部受冲击载荷作用，在应力波传播过程中的非对称屈曲问题。通过求解扰动方程得到了动态屈曲的分叉条件、临界载荷和屈曲模态。数值结果表明，当壳壁厚不很薄时，轴对称屈曲临界载荷比非对称临界载荷高；反之，轴对称临界载荷会比非对称临界载荷低。不同的冲击载荷，屈曲模态也将不同。     

Influence of general imperfections in axially loaded cylindrical shells

The buckling of an axially loaded cylindrical shell is considered when imperfection components corresponding to all of the classical buckling modes are taken into consideration. The analysis represents an extension of Koiter's axisymmetric solution and in the asymptotic sense due to Koiter the imperfections considered are as general as possible. The results obtained reveal many interesting aspects of shell buckling which arize for various imperfection forms. The buckling behaviour which results is associated with both bifurcation and limit point critical states.     

Wrinkling of tubes in bending from finite strain three-dimensional continuum theory

The problem of a tube under pure bending is first solved as a generalised plane strain problem. This then provides the prebifurcation solution, which is uniform along the length of the tube. The onset of wrinkling is then predicted by introducing buckling modes involving a sinusoidal variation of the displacements along the length of the tube. Both the prebuckling analysis and the bifurcation check require only a two-dimensional finite element discretisation of the cross-section with special elements. The formulation does not rely on any of the approximations of a shell theory, or small strains. The same elements can be used for pure bending and local buckling a prismatic beam of arbitrary cross-section. Here the flow theory of plasticity with isotropic hardening is used for the prebuckling solution, but the bifurcation check is based on the incremental moduli of a finite strain deformation theory of plasticity.For tubes under pure bending, the results for limit point collapse (due to ovalisation) and bifurcation buckling (wrinkling) are compared to existing analysis and test results, to see whether removing the approximations of a shell theory and small strains (used in the existing analyses) leads to a better prediction of the experimental results. The small strain analysis results depend on whether the true or nominal stress–strain curve is used. By comparing small and finite strain analysis results it is found that the small strain approximation is good if one uses (a) the nominal stress–strain curve in compression to predict bifurcation buckling (wrinkling), and (b) the true stress–strain curve to calculate the limit point collapse curvature.In regard to the shell theory approximations, it is found that the three-dimensional continuum theory predicts slightly shorter critical wrinkling wavelengths, especially for lower diameter-to-wall-thickness (D/t) ratios. However this difference is not sufficient to account for the significantly lower wavelengths observed in the tests.     

Static buckling appraisal of an echinodome

The buckling behavior of an underwater shell of revolution structure of optimum form—an echinodome—is examined under axisymmetric and symmetric point loads both experimentally and theoretically. For the concentrated loadings, experimental predictions of critical buckling are based on the Southwell technique and a possible alternative method is suggested. Bifurcation and nonlinear collapse buckling analyses are described theoretically. Within the bifurcation investigation both linear and nonlinear approaches are included. The effects of base fixity on the instability of the structure are considered. Comparisons are made with earlier external-pressure loading effects and the relative significance of the two forms of loading are discussed.     

含轴对称初始缺陷的具有正交各向异性表层的夹层圆柱壳的非线性屈曲

夹层圆柱壳具有很高的结构效能。在许多工程结构中被广泛采用。本文研究分析了含有轴对称初始缺陷的夹层圆柱壳在轴压下的非线性屈曲问题。该夹层壳具有正交各向异性表层和各向同性可承剪的夹心．利用Stein的前屈曲一致理论得出了前屈曲挠度随轴向载荷及缺陷参数的变化情况，运用Galerkin法导出了屈曲控制方程，并进行了数值计算，得到了屈曲载荷、缺陷幅值、缺陷波数、夹心模量等参量之间的关系．结果表明与壳体实际屈曲模态相同的初始缺陷具有很大的危害性，可以通过增加壳体表层的轴向弹性模量或优化夹心的有关参数等途径来提高屈曲载荷，改善壳体屈曲性能。     

THE DYNAMIC BUCKLING PROBLEM CAUSED BY PROPAGATION OF STRESS WAVE IN ELASTIC

ＨａｎＱｉａｎｇ（韩强）；ＭａＨｏｎｇｗｅｉ（马宏伟）；ＺｈａｎｇＳｈａｎｙｕａｎ（张善元）；ＹａｎｇＧｕｉｔｏｎｇ（杨桂通）；ＷｕＪｉｋｅ（武际可）（ＲｅｃｅｉｖｅｄＮｏｖ．１８．１９９４）ＴＨＥＤＹＮＡＭＩＣＢＵＣＫＬＩＮＧＰＲＯＢＬＥＭＣＡＵＳ...     

冲击扭矩作用下碳纳米管动力屈曲的研究

为了研究碳纳米管在冲击扭矩作用下的动力屈曲,采用了连续模型将碳纳米管模拟成半无限长的弹性连续圆柱壳。将冲击扭矩作用下碳纳米管的动力屈曲问题归结为由于扭转应力波传播导致的分叉问题,此分叉问题被化为一个非线性方程组的求解。最后进行了数值分析,讨论了碳纳米管的不同参数对动力屈曲的影响,发现碳纳米管有极强的抗冲击性,临界屈曲剪应力可高达几百吉帕。     

Supercritical and subcritical buckling bifurcations for a compressible hyperelastic slab subjected to compression

We study the buckling bifurcation of a compressible hyperelastic slab under compression with sliding–sliding end conditions. The combined series-asymptotic expansions method is used to derive the simplified model equations. Linear bifurcation analysis yields the critical stress value of buckling, which gives a non-linear correction to the classical Euler buckling formula. The correction is due to the geometrical non-linearities coupled with the material non-linearities. Then through non-linear bifurcation analysis, the approximate analytical solutions for the post-buckling deformations are obtained. The amplitude of buckling is expressed explicitly in terms of the aspect ratio, the incremental dimensionless engineering stress, the mode of buckling and the material constants. Most importantly, we find that both supercritical and subcritical buckling could occur for compressible materials. The bifurcation type depends on the material constants, the geometry of the slab and the mode numbers.     

Uniqueness and stability of rigid-plastic spherical shells subjected to finite deformation under hydrostatic pressure

The rate problem for rigid-plastic strain-hardening deformations in structures subjected to prescribed hydrostatic pressure surface load is stated rigorously with due account of finite deformations. From the basic theory, a complete solution for admissible stress and velocity fields occurring at bifurcation is obtained for the problem of a spherical shell under arbitrary combinations of internal and external pressures. An earlier proven, sufficient condition for the uniqueness of continuing quasi-static deformation of a spherical shell is shown to be one of necessity. In the case of solely external pressure, it is shown that buckling modes are excluded by attention to an isotropically strain-hardening material with a non-singular yield surface. For preponderant internal pressure, however, it is possible for the predicted bifurcation mode to occur under increasing pressure.     

Numerical Analysis of Axisymmetric Buckling of a Conical Shell under Radial Compression

The nonlinear boundary-value problem of the axisymmetric buckling of a simply supported conical shell (dome) under a radial compressive load applied to the supported edge is formulated for a system of six first-order ordinary differential equations for independent fields of finite displacements and rotations. Multivalued solutions are obtained using the shooting method with specified accuracy. For various values of the loading parameter, bifurcation of the solutions of the problem is studied and a parametric branching diagram is constructed. The buckling modes are obtained for three branches of the solution. Curves of the buckling modes corresponding to three isolated branches of the solution are given.     

Effect of thickness inhomogeneities in internally pressurized elastic-plastic spherical shells

The behaviour of elastic-plastic spherical shells under internal pressure is investigated numerically for thickness-to-radius ratios ranging from cases of thin shells to very thick shells. The shells under consideration are made of strain-hardening elastic-plastic material with a smooth yield-surface. Attention is restricted to axisymmetric deformations, and results are presented for initial thickness inhomogeneities in various axisymmetric shapes. For smooth thickness-variations in the shape of the critical bifurcation mode, the reduction in maximum pressure is studied together with the distribution of deformations in the final collapse mode. Also, the possibility of flow localization due to more localized, initially thin regions on a spherical shell is investigated.     

Effect of the nonlinear pre-buckling state on the bifurcation point of conical shells

The effect of pre-buckling nonlinearity on the bifurcation point of a conical shell is examined on the basis of three shell theories: Donnell’s, Sanders’ and Timoshenko’s. The eigenvalue problem is solved iteratively about the nonlinear equilibrium state up to the bifurcation point. A new algorithm is presented for the real buckling behavior, dispensing with the need to cover the entire nonlinear pattern. This algorithm is very important for structures characterized by a softening process, in which the pre-buckling nonlinearity depresses the buckling level relative to the classical one.The procedure involves nonlinear partial differential equations, which are separated into two sets (using the perturbation technique) for the pre-buckling and buckling states, respectively and solved with the variable expanded in Fourier series in the circumferential direction, and by finite differences in the axial direction. A general computer code was developed and used in studying the effect of the pre-buckling nonlinearity on the buckling level, of the shell under axial compression, in the context of the three shell theories.     

Ratcheting and wrinkling of tubes due to axial cycling under internal pressure: Part I experiments

Under compression, pressurized tubes thick enough to deform plastically buckle into an axisymmetric wrinkling mode. The wrinkle amplitude is initially small but with persistent compression grows inducing a gradual reduction in axial rigidity and eventually causing a limit load instability, which is followed by collapse. The onset of buckling and collapse can be separated by a strain level of a few percent. This work investigates whether a tube that develops small-amplitude wrinkles can be subsequently collapsed by persistent axial cycling. Part I presents the results from a set of experiments on super-duplex tubes with D/t of 28.5 loaded as follows. A tube is pressurized and then compressed into the plastic range to a level that initiates wrinkling. It is then cycled under stress control about a compressive mean stress while the pressure is kept constant. The combined loads cause simultaneous ratcheting in the hoop and axial directions as well as a gradual growth of the wrinkles. At some stage the amplitude of the wrinkles starts to grow exponentially with the number of cycles N leading to localization and collapse. The rate of ratcheting and the number of cycles to collapse depend on the initial compressive pre-strain, the internal pressure, and the stress cycle parameters all of which were varied sufficiently to generate an adequate data base. Interestingly, in all cases collapse was found to occur when the accumulated average strain reached the value at which the tube localizes under monotonic compression. A shell model coupled to a specially calibrated plasticity model that can reproduce the biaxial ratcheting exhibited in the problem are presented in Part II. The model is first evaluated by comparison to the experiments and then used to study parametrically cyclic loading histories seen in buried pipelines.     

Exact analytical solutions for the local and global buckling of sandwich beam-columns under various loadings

Sandwich structures are widely used in many industrial applications, due to the attractive combination of a lightweight and strong mechanical properties. This compromise is realized thanks to the presence of different parts in the composite material, namely the skins and possibly core reinforcements or thin-walled core structure which are both thin/slender and stiff relative to the other parts, namely the homogeneous core material, if any. The buckling phenomenon thus becomes mainly responsible for the final collapse of such sandwiches. In this paper, classical sandwich beam-columns (with homogeneous core materials) are considered and elastic buckling analyses are performed in order to derive the critical values and the associated bifurcation modes under various loadings (compression and pure bending). The two faces are represented by Euler–Bernoulli beams, whereas the core material is considered as a 2D continuous solid. A set of partial differential equations is first obtained from a general bifurcation analysis, using the above assumptions. Original closed-form analytical solutions of the critical loading and mode of a sandwich beam-column are then derived for various loading conditions. Finally, the proposed analytical formulae are validated using 2D linearized buckling finite element computations, and parametric analyses are performed.     

安全壳中钢衬壳热屈曲问题理论与实验研究(Ⅱ)──实验部分

钢衬壳热屈曲问题是核工程安全壳设计中的主要问题,但实验研究方面的文章发表得不多文中以200兆瓦核电站安全壳中钢衬壳为研究对象,采用局部1：1模型,测得了钢衬壳热屈曲温度和应变载荷,给出了钢衬壳屈曲和初始后屈曲过程中挠度和温度关系、以及膜应变和温度关系,实验测得钢衬壳具有局域屈曲的现象,实验屈曲载荷与理论结果符合较好     

Torsional buckling of spherical shells under circumferential shear loads

ＩｎｔｒｏｄｕｃｔｉｏｎＩｍｐｏｒｔａｎｔａｐｌｉｃａｔｉｏｎｓｏｆｔｈｅｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｓｈｅｌｓｃａｎｂｅｆｏｕｎｄｉｎｔｈｅｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｒａｎｇｉｎｇｏｖｅｒｔｈｅａｅｒｏｓｐａｃｅ,ｍａｒｉｎｅ,ａｒ...     

Non-linear axisymmetric response of functionally graded shallow spherical shells under uniform external pressure including temperature effects

This paper presents an analytical approach to investigate the non-linear axisymmetric response of functionally graded shallow spherical shells subjected to uniform external pressure incorporating the effects of temperature. Material properties are assumed to be temperature-independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Equilibrium and compatibility equations for shallow spherical shells are derived by using the classical shell theory and specialized for axisymmetric deformation with both geometrical non-linearity and initial geometrical imperfection are taken into consideration. One-term deflection mode is assumed and explicit expressions of buckling loads and load-deflection curves are determined due to Galerkin method. Stability analysis for a clamped spherical shell shows the effects of material and geometric parameters, edge restraint and temperature conditions, and imperfection on the behavior of the shells.     

The growth simulation of circular buckling-driven delamination

Some closed-form equations for the coupling problem of buckling and growth of circular delamination are derived by recourse to the moving boundary variational principle. The axisymmetric buckling of a circular delamination subjected to an equal bi-axial compression is analysed by using high-order perturbation expansion. The axisymmetric buckled delamination has the following properties : under a certain residual pressure, there exist two characteristic radii, namely the critical radius R_c and growing radius R_g; for a certain interface toughness, the blister has three configuration of stationary, stable growth and unstable growth with increasing the loads. Under a higher edge thrust, the nonaxisymmetric secondary buckling will occur on the base of axisymmetric buckling and then the toughness and the driving force of the interface crack will be different along the delamination front. So the growth of circular delamination will not be self-similar. Without any assumption regarding the delamination front, the configurations of the blister with several nonaxisymmetric buckling modes n = 2, 3, 6, 8 are simulated. The nonaxisymmetric growth process for the nonaxisymmetric buckling mode n = 2 is simulated also under a sequence of loads.