轴同期涡动和轴承座激振对轴承油膜稳定性的影响

在自行设计的轴承试验台上研究了轴颈同期涡动和轴承座激振对油膜层流失稳的影响 .结果表明 :随着轴颈偏心的增大 ,涡动倾向增强 ,流体出现层流失稳 ;当涡动倾向较弱时 ,影响油膜层流失稳的主要因素是轴承激振的强度以及低频激振 ,而高频激振对其影响较小 ;但当涡动倾向较强时 ,轴承激振的强度以及激振频率对油膜层流的失稳几乎没有影响     

碰摩裂纹转子轴承系统的周期运动稳定性及实验研究

根据碰摩裂纹耦合故障转子轴承系统的非线性动力学方程，利用求解非线性非自治系统周期解的延拓打靶法，研究了系统周期运动的稳定性。研究发现，小偏心量下系统周期运动发生Hopf分岔，大偏心量下系统周期运动发生倍周期分岔，偏心量的加大使周期解的稳定性明显降低；系统碰摩间隙变小，碰摩影响了油膜涡动的形成，使失稳转速有所提高；裂纹深度的加大降低了系统周期运动的稳定性。本文的研究为转子轴承系统的安全稳定运行提供了理论参考。     

An anisothermal,compressible, piezoviscous model for journal‐bearing lubrication

Compressibility plays a significant role in the load‐bearing capacity of a journal bearing. This paper offers more realistic modelling of the lubricant than presented in an earlier paper (Int. J. Numer. Meth. Fluids 2007; 55 (11):1091–1120) by including variable sound speed, piezoviscosity and both temperature and shear thinning. The load‐bearing capacity of the journal bearing is sensitive to all of these attributes of the model, but piezoviscosity is found to be the most significant. The equations of motion are adapted to a moving frame to explore the stability of the journal in a more dynamic setting and it is found that a free journal using this model will spiral outward exhibiting half speed whirl. The model is discretized in 2D, semi‐implicitly in time and using the spectral element method in space. Numerical results are presented that highlight the contributions of the different elements in the model to journal stability. Copyright © 2008 John Wiley & Sons, Ltd.     

Bifurcation of a shaft with hysteretic-type internal friction force of material

IntroductionItwasfoundlongtimeagothattheinternalfrictionofmaterialcancauseinstabilityofrotatingshaft.Soitisalwaysoneoftheimportantsubjectsinrotordynamics[1].Earlyinvestigationswerefocusedonthedynamicalstabilityproblemofrotorinfluencedbythelinearinternalfrictionofmaterial,aimingtoobtainthecriterionofstability[2～4 ].Asthedevelopmentofnonlineardynamics,moreandmoreattentionswerepaidtothestudyoftheself_excitedmotionofrotatingshaft,thatisthebifurcation .Thestabilityregionsandbifurcationsofbothanau…     

Radial and torsional vibration characteristics of a rub rotor

The nonlinear dynamics characteristics of a vertical Jeffcott rotor with radial rub-impact are investigated in this paper. Considering the influence of speed whirling, the radial-torsional coupling model of the rub rotor in polar coordinate system is established. With the improved model, the dynamics characteristics of radial vibration, whirl and torsional vibration are analyzed under no rub, full annual rub and partial rub conditions. The radial harmonic frequency is obtained by the harmonic balance method. The torsional vibration has the harmonic frequency component similar to the radial vibration. The new harmonic frequency is useful to help diagnose the occurrence of rub fault. A reasonable explanation of backward whirl instability is presented in this paper. With development of partial rub, the backward whirl will occur. When the backward whirling frequency is near the natural frequency, the instability is observed. The numerical method gives the quantitative results and reveals the backward whirl instability process of rub.     

多自由度转子-轴承系统周期运动分岔及稳定性研究

建立考虑诸多因素的转子-轴承系统多自由度模型,将与Newmark结合的打靶法应用到多自由度转子-轴承系统的周期稳定性分析中。着重研究了转子-轴承系统失稳转速随系统偏心量、轴承间隙、润滑油动力粘度以及轴承长径比的变化规律,研究结果表明:提高系统偏心量、减小轴承间隙、增大润滑油动力粘度以及选择适当的轴承长径比均能提高转子-轴承系统的失稳转速;对于不同的参数值,系统表现出不同的分岔规律,系统发生半速涡动时表现为倍周期分岔或拟周期分岔,发生油膜振荡时则表现为拟周期分岔。     

Numerical and experimental analysis of the first-and second-mode instability in a rotor-bearing system

Aiming at the oil film instability of the sliding bearing at high speeds, a rotor test rig is built to study the non-linear dynamic behaviours caused by the first- and second-mode instability. A lumped mass model (LMM) of the rotor system considering the gyroscopic effect is established, in which the graphite self-lubricating bearing and the sliding bearing are simulated by a spring–damping model and a nonlinear oil film force model based on the assumption of short bearings, respectively. Moreover, a finite element model is also established to verify the validity of the LMM. The researches focus on the effects of two loading conditions (the first- and second-mode imbalance excitation) on the onset of instability and nonlinear responses of the rotor-bearing system by using the amplitude–frequency response, spectrum cascade, vibration waveform, orbit, and Poincaré map. Finally, experiments are carried out on the test rig. Simulation and experiment all show that oil film instability can excite complicated combination frequency components about the rotating frequency and the first-/second-mode whirl/whip frequency.     

Flexible shaft whirl induced by dry friction and its stability

This paper is devoted to the study of the whirling phenomena of flexible rotors due to dry friction. The mechanical model used here is a two-degree-of-freedom system in which the rubbing plane is not coincident with the rotating plane of the lumped mass. The characteristic equation of whirl speeds is derived and the whirling modes are obtained. The dynamic stability of each admissible whirling motion is also discussed. The results show that the whirl speeds are always higher than the critical speed of the shaft.     

高速涡轮增压器轴承-转子系统不平衡响应及稳定性分析

汽车涡轮增压器广泛采用浮环轴承支承的小型轻质转子系统,以实现100 000~300 000 r/min的工作转速,提高发动机功率和动力性能,并降低燃油消耗和排放. 在此超高速工况下,动压油膜的强非线性作用和转子固有的不平衡效应使该系统呈现出复杂的动力学现象,其中油膜涡动、振荡、跳跃、倍周期分岔和混沌等非线性动力学行为对增压器的健康运转意义重大,因而备受关注. 本文作者从摩擦学动力学耦合的角度出发,基于流体动压轴承润滑理论和有限差分法计算非稳态油膜压力,结合达朗贝尔原理和传递矩阵法建立了转子离散化动力学方程,提出了一种由双油膜浮环支承的涡轮增压器转子系统动力学模型,并从转子轨迹、轴承偏心率、频谱响应、庞加莱映射和分岔特性等方面比较分析,描述了该非线性轴承-转子系统的不平衡效应及油膜失稳特征. 结果表明:转子一般在相对低速下作稳定的单周期不平衡振动,在高转速下其被油膜失稳引起的次同步涡动所抑制,但不平衡量的增加可阻碍转子以拟周期运动通向混沌运动的路径;适当不平衡补偿下,由于内、外油膜间交互的非线性刚度和阻尼作用,在油膜失稳区间之间的中高速区会出现适合增压器健康运转的稳定区间.      

非线性转子-轴承系统涡动的机械化数学分析

为研究转子一轴承系统中非线性油膜力引起的半速涡动，本文给出了将吴文俊消去法和符号计算相结合的分析方法。基于短轴承假设，得到了单盘转子系统涡动时盘心、轴心及涡动角速度相对于无量纲转速的关系式。分析研究了转子涡动角速度变化规律及出现的双稳态现象。     

Fault diagnosis of a rotor bearing system using response surface method

Dynamic analysis of a high-speed rotor bearing systems is challenged by their highly nonlinear and complex properties. Hence, an approximate response surface method (RSM) is utilized to analyze the effects of design and operating parameters on the vibration signature of a rotor-bearing system. This paper focuses on accurate performance prediction, which is essential to the design of high performance rotor bearing system. It considers distributed defects such as internal radial clearance and surface waviness of the bearing components. In the mathematical formulation the contacts between the rolling elements and the races are considered as nonlinear springs, whose stiffnesses are obtained by using Hertzian elastic contact deformation theory. The governing differential equations of motion are obtained by using Lagrange's equations. In terms of the feature that the nonlinear bearing forces act on the system, a reduction method and corresponding integration technique is used to increase the numerical stability and decrease computer time for system analysis. Parameters effects are analyzed together and its influence considered with DOE and Surface Response Methodology are used to predict dynamic response of a rotor-bearing system.     

含万向铰偏斜旋转轴的组合共振及其稳定性分析

基于欧拉方程推导出了含万向铰偏斜旋转轴的横向振动模型,利用多尺度方法对该模型进行求解,得出了该偏斜系统可能出现的多种共振模式,进而对含万向铰偏斜轴系横向振动和型组合共振、差型组合共振进行稳定性分析,并对该类偏斜系统横向振动和型组合共振响应进行数值计算与仿真,检验所得稳定性理论分析结果。研究表明:对于和型组合共振而言,其稳定性边界与输入扭矩T0、支撑轴承安装位置l、轴承刚度Kx2和Ky2等因素有关;当轴承安装位置距万向铰中心较近或者轴承弹簧刚度系数较小时,系统在频率(ω10+ω20)/2附近产生和型组合共振的区域减小,即能够抑制系统和型组合共振的产生。该研究可为偏斜轴系振动与噪声抑制提供理论支持。     

Nonlinear dynamic characteristics of ball screw feed system under thermal deformation

In this study, a novel kinetic model is established to investigate the dynamic characteristic of the ball screw feed system by considering the thermal deformation of bearing joints, screw-nut joints and screw shaft. Based on the Hertz contact theory, the relationship between elastic restoring force and axial deformation of bearing joints and screw-nut joints is obtained, respectively. Then the dynamic characteristics of the kinetic equation are analyzed by Runge–Kutta method. The vibration characteristics of the feed system with and without thermal deformation are analyzed, and the results indicate that the amplitude becomes larger when thermal deformation is considered. The motion state of the feed system at different frequencies is analyzed, and the results show that with the change of frequency, the motion state of the system will appear period-doubling motion, quasi-periodic motion and chaotic motion. Finally, the influence of different parameters on the vibration characteristics of the system is discussed.

     

随动耦合变阶梯径向滑动轴承动力特征及稳定性的研究

用有限差分法循环迭代求解了随动耦合变阶梯结构径向滑动轴承油膜压力的雷诺方程和两阶段油膜耦合变阶梯结构的流量控制方程。在分析轴承油膜压力形成机量及静力特性的基础上,采用对位移和速度的小扰动法计算了轴承的动力特性系数,考察了运转参数对这种轴承承载特性、动力特性系数、等效刚度、界限涡动比以界限失稳转速的影响,结果发现合理地选择设计参数可以使这种轴承具有较好的静力特性、动力特性和稳定性。     

Response analysis of a dual-disc rotor system with multi-unbalances–multi-fixed-point rubbing faults

Rotor unbalance and rub-impact are major concerns in rotating machinery. In order to study the dynamic characteristics of these machinery faults, a dual-disc rotor system capable of describing the mechanical vibration resulting from multi-unbalances and multi-fixed-point rub-impact faults is formulated using Euler beam element. The Lankarani–Nikravesh model is used to describe the nonlinear impact forces between discs and casing convex points, and the Coulomb model is applied to simulate the frictional characteristics. To predict the moment of rub-impact happening, a linear interpolation method is carried out in the numerical simulation. The coupling equations are numerically solved using a combination of the linear interpolation method and the Runge–Kutta method. Then, the dynamic behaviours of the rotor system are analysed by the bifurcation diagram, whirl orbit, Poincaré map and spectrum plot. The effects of rotating speed, phase difference of unbalances, convex point of casing and initial clearance on the responses are investigated in detail. The numerical results reveal that a variety of motion types are found, such as periodic, multi-periodic and quasi-periodic motions. Moreover, the energy transfer between the compressor disc and the turbine disc occurs in the multi-fixed-point rubbing faults. Compared with the parameters of the turbine disc, those of the compressor disc can affect the motion of the rotor system more significantly. That is, the responses exhibit simple 1T-periodic motion in the wide range of rotating speed under the conditions of sharp convex point and larger initial clearance. These forms of dynamic characteristics can be effectively used to diagnose the fixed-point rub-impact faults.     

弹性转子-滑动轴承系统稳定性分析

对一人考虑不平衡力和非线性油膜力的弹性转子 -轴承系统 ,用数值方法研究其稳定性和油膜失稳运动 (自激振动 )特性 ;推导出转子受冲击的运动模型 ,并分析了冲击对系统稳定性的影响规律。     

Nonlinear dynamic behaviors of a rotor-labyrinth seal system

The nonlinear model of rotor-labyrinth seal system is established using Muszynska’s nonlinear seal forces. We deal with dynamic behaviors of the unbalanced rotor-seal system with sliding bearing based on the adopted model and Newmark integration method. The influence of the labyrinth seal one the nonlinear characteristics of the rotor system is analyzed by the bifurcation diagrams and Poincare’ maps. Various phenomena in the rotor-seal system, such as periodic motion, double-periodic motion, quasi-periodic motion and Hopf bifurcation are investigated and the stability is judged by Floquet theory and bifurcation theorem. The influence of parameters on the critical instability speed of the rotor-seal system is also included.     

质量任意分布下的柔性转子过临界点时的瞬态响应

本文首先将Riccati传递矩阵法和正、逆回旋运动分解理论应用于有阻尼的分布质量转子的复特征问题计算，求出系统各阶正、逆回旋临界速度（也称临界点）及相应振型然后作者对广义阻尼模态理论作了引伸和发展，结合Bogoliubov-Mitropolskii渐近法，建立起一阶微分方程组，计算不平衡柔性转子分别在正、逆回旋下通过各阶临界点的非线性、非定常瞬态响应，还深入分析了转子相继通过两十分邻近的临界点时发生的耦合现象。     

Jeffcott转子油膜稳定的定性分析

基于Ｍｕｓｓｙｎｓｋａ刚性转子模型,对转子涡动的稳定性进行了分析研究,采用首次近似方程判断了转子涡动方程零解与极限坏的稳定性,确定了转子运动的稳定性条件,在极坐标系下首次给出了用三个状态方程表示的转子轴际系统的简捷方程。     

推力主动磁轴承的动特性参数辨识

针对五自由度刚性非对称磁轴承 -转子系统 ,建立了系统动力学模型 ,在此基础上推导出系统动特性参数辨识公式 ,并用多频电流激励法辨识出参数 .与理论计算结果相比表明 :系统所建模型符合实际 ,辨识方法有效 ;径向轴承在 x和 y方向上的力 -刚度和力 -电流系数相同 ,与推力轴承对应系数相比稍大 ;推力轴承对转子横向振动产生的耦合效应明显影响系统的稳定性 ,在设计系统时必须加以考虑