均布荷载作用下功能梯度悬臂梁弯曲问题的解析解

采用弹性力学半逆解法,假设所有材料常数沿梁厚度方向按同一函数规律变化,求得了功能梯度悬臂梁在均布载荷作用下的解析解.该解退化到各向同性均匀弹性情况时与已有的理论解相一致.对弹性模量按指数函数梯度变化的算例进行了分析.所得到的解对任意梯度函数均成立,可作为数值解以及简化理论的检验依据.     

功能梯度材料梁自由振动的线性与非线性振动

基于数值模拟和理论分析两种方法,研究了功能梯度材料(functional gradient materials,FGM)梁自由振动下的线性与非线性振动问题。通过解析法求解了FGM梁在经典理论下以及一阶剪切理论下的力学行为,得到了FGM梁在简支和固端约束下的固有频率。理论分析了不同边界条件、不同梁理论下、梯度指数、长细比等因素对于FGM梁固有频率的影响;不论经典梁理论还是一阶剪切理论,随着梯度指数的增加,FGM梁的固有频率都随之减小。通过ABAQUS仿真模拟,得到FGM梁数值模拟下的非线性固有频率。将理论解与数值解进行对比,完善力学模型。在多种理论下,利用解析法和数值模拟的方法,给出FGM梁结构振动响应的线性与非线性解。     

均布荷载作用下功能梯度简支梁弯曲的解析解

利用应力函数半逆解法,研究了均布载荷作用下、材料属性在厚度上任意变化的功能梯度简支梁弯曲的解析解,给出了各向应力应变与位移的解析显式表达式.首先根据平面应力状态的基本方程,得出了功能梯度梁的应力函数应满足的偏微分方程,并根据应力边界条件得出了各应力分布的表达式;进而根据功能梯度材料的本构方程和位移边界条件,得出了应变和位移的分布.最后,通过将本文的解退化到均质各向同性梁并与经典弹性解比较,证明了本文理论的正确性,并求解了材料组分呈幂律分布的功能梯度梁的应力和位移分布,分析了上下表层材料的弹性模量比λ与组分材料体积分数指数n对应力和位移分布的影响.     

功能梯度材料板件三维分析的半解析梯度有限元法

将半解析有限元与梯度有限元相结合,形成一种半解析梯度有限元来求解功能梯度材料板件问题。该方法兼有有限元法的适应性强、程序统一,半解析有限元法的节省单元与计算工作量,梯度有限元法的适应构件内部材料性能任意梯度分布等特点,并实现用一维数值计算给出构件三维分析结果。算例分析表明了方法的精度、功能与上述特点,充分揭示了功能梯度材料板件力学响应的三维形态。半解析梯度有限元法可推广应用到其他功能梯度材料面结构的各类分析中。     

功能梯度与均匀圆板静动态解之间的相似转换关系

基于经典板理论,研究了功能梯度材料圆板的轴对称弯曲、屈曲和自由振动解与相应的均匀材料圆板解之间的转换关系.通过消去拉-弯耦合项得到了以挠度函数表示的功能梯度圆板的弯曲、屈曲和自由振动控制方程.分析功能梯度圆板与均匀圆板的控制方程之间的相似性,得到了功能梯度材料圆板与均匀圆板的解之间解的相似转换关系,在假定FGM圆板的材料性质沿厚分别以幂函数和指数函数的度变规律后,给出了相应的转换系数的解析表达式.该系数集中反映了功能梯度圆板的材料非均匀性.在已知均匀材料圆板轴对称解的条件下,可将功能梯度材料圆板轴对称问题的求解转化为相似转换系数的计算问题.这一方法可为非均匀板的求解提供了十分便捷有效的途径,而且便于工程应用.     

一种特殊梯度分布的功能梯度圆柱壳的二维分析

功能梯度材料是一种新型材料,其结构分析已成为当今力学研究的热点。本文对一种特殊梯度分布的功能梯度材料圆柱壳进行了二维精确分析。从弹性力学平面应变问题的基本方程出发,引入应力函数,导出功能梯度材料圆柱壳受静载作用下的控制微分方程。假设材料的杨氏模量沿半径方向呈幂函数分布,泊松比为常数,利用分离变量法,导出了简支边界情况下功能梯度圆柱壳的精确解。通过算例分析了不同梯度变化时,功能梯度圆柱壳内的应力和位移变化规律。计算结果表明不同梯度分布的圆柱壳结构中的应力、位移沿厚度方向的变化规律是不同的,有时甚至差别很大。因此对于材料性质梯度变化的功能梯度材料圆柱壳,必须针对其自身特点,建立相应的理论分析模型。     

功能梯度与均匀圆板弯曲解的线性转换关系

基于一阶剪切理论, 研究了功能梯度材料圆板与均匀圆板轴对称弯曲解之间的线性转换关系. 通过理论分析和比较 功能梯度材料圆板和均匀圆板在一阶剪切理论下的位移形式的轴对称弯曲控制方程, 发现了功能梯度材料圆板的转角与均匀圆板的转角之间的相似转换关系. 在假设材料性质沿板厚连续变化的情况下, 给出了相似转换系数的解析表达式. 在此基础上, 进一步导出了一阶剪切理论下功能梯度圆板的挠度与经典理论下, 均匀圆板的挠度之间的线性关系. 从而, 可将功能梯度材料圆板在一阶剪切理论下的弯曲问题求解, 转化为相应均匀薄圆板在经典理论下的弯曲问题求解, 以及转换系数的计算问题. 这一方法为功能梯度非均匀中厚度圆板的求解提供了简捷途径, 而且更便于工程应用. 作为例子, 采用上述方法分别求得了周边简支和夹紧条件下, 梯度圆板在均布横向载荷作用下的弯曲解析解, 该解答与Reddy得到的结果完全吻合.      

功能梯度材料明德林矩形微板的热弹性阻尼

功能梯度材料微板谐振器热弹性阻尼的建模和预测是此类新型谐振器热?弹耦合振动响应的新课题. 本文采用数学分析方法研究了四边简支功能梯度材料中厚度矩形微板的热弹性阻尼. 基于明德林中厚板理论和单向耦合热传导理论建立了材料性质沿着厚度连续变化的功能梯度微板热弹性自由振动控制微分方程. 在上下表面绝热边界条件下采用分层均匀化方法求解变系数热传导方程, 获得了用变形几何量表示的变温场的解析解. 从而将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的偏微分方程. 然后,利用特征值问题在数学上的相似性,求得了四边简支条件下功能梯度材料明德林矩形微板的复频率解析解, 进而利用复频率法获得了反映谐振器热弹性阻尼水平的逆品质因子. 最后, 给出了材料性质沿板厚按幂函数变化的陶瓷?金属组分功能梯度矩形微板的热弹性阻尼数值结果. 定量地分析了横向剪切变形、材料梯度变化以及几何参数对热弹性阻尼的影响规律. 结果表明, 采用明德林板理论预测的热弹性阻尼值小于基尔霍夫板理论的预测结果, 而且两者的差别随着相对厚度的增大而变得显著.      

功能梯度材料热传导问题的近场动力学模型

当材料中存在不连续性缺陷的时候,传统的基于连续介质理论的方法在研究热传导问题时存在诸多不便．我们基于近场动力学方法(Peridynamics)建立了功能梯度材料的热传导模型,并且研究了在温度荷载作用下功能梯度材料的温度场的变化表现．该文概述了PD方法应用于热传导问题时的详细理论基础,描述了其建模思路以及计算体系,给出了使用PD方法模拟结构承受温度荷载时的计算格式,讨论了不同梯度形式对功能梯度材料内热传导的影响．算例结果表明：通过PD模型所得到的温度场与解析解吻合较好,证明了PD方法在分析功能梯度材料热传导行为等问题时的可行性．     

功能梯度矩形板问题三维理论的半解析解

针对功能梯度材料矩形板问题,基于三维弹性理论,将位移和应力分量作为基本变量,通过双三角级数将其控制微分方程转化为常微分方程组的边值问题。采用插值矩阵法直接对常微分方程组边值问题进行求解,得到了功能梯度材料矩形板三维位移、应力场的半解析解。通过算例给出了材料参数按指数形式和幂函数形式变化情况下的功能梯度板的弯曲问题。对比有限元法和状态空间法,结果表明：本文提出的状态空间与插值矩阵法相结合的半解析法能有效地分析材料参数按任意形式连续变化的功能梯度矩形板问题,且具有良好的精度,精度可达10-4量级,能够满足工程需要;与其他方法相比,本文方法具有实施便捷、计算量小等优点,根据其力学场分析结果可设计出满足各种不同需求的功能梯度材料。     

AXISYMMETRIC BENDING OF TWO-DIRECTIONAL FUNCTIONALLY GRADED CIRCULAR AND ANNULAR PLATES

Assuming the material properties varying with an exponential law both in the thick- ness and radial directions,axisymmetric bending of two-directional functionally graded circular and annular plates is studied using the semi-analytical numerical method in this paper.The de- flections and stresses of the plates are presented.Numerical results show the well accuracy and convergence of the method.Compared with the finite element method,the semi-analytical nu- merical method is with great advantage in the computational efficiency.Moreover,study on ax- isymmetric bending of two-directional functionally graded annular plate shows that such plates have better performance than those made of isotropic homogeneous materials or one-directional functionally graded materials.Two-directional functionally graded material is a potential alter- native to the one-directional functionally graded material.And the integrated design of materials and structures can really be achieved in two-directional functionally graded materials.     

空隙分布对功能梯度板件宏观响应的影响

提出了一种新的功能梯度结构分析的细观元法. 细观元法对结构的常 规有限单元内部设置密集细观单元以反映材料细观构造,又通过协调条件将各细观元结点自 由度转换为同一常规有限元自由度. 此方法实现了材料细观结构到构件宏观响 应的直接过渡分析. 用细观元法来分析细观构造上空隙存在对宏观响应影响,给出了含 有不同分布与形状、位置空隙的功能梯度板件的力学量三维分布形态,实现功能梯度材料结 构宏、细观间跨尺度分析.     

基于金相图片识别功能梯度材料参数的梯度分布函数

功能梯度材料具有复杂的细观结构.其内部构造远比匀质材料复杂.以目前的实验条件,测量功能梯度材料参数分布函数一般是十分困难的.该文提出一种细观元方法,直接利用功能梯度材料金相图片信息,来进行功能梯度构件宏观响应的跨尺度力学分析.另在功能梯度材料结构静、动力正演分析基础上,根据正演所求得的挠度或固有频率值,采用混和罚函数法来反演识别功能梯度材料参数的宏观梯度分布函数.     

Basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials

The basic solution of two parallel mode-I permeable cracks in functionally graded piezoelectric materials was studied in this paper using the generalized Almansi’s theorem. To make the analysis tractable, it was assumed that the shear modulus varies exponentially along the horizontal axis parallel to the crack. The problem was formulated through a Fourier transform into two pairs of dual integral equations, in which unknown variables are jumps of displacements across the crack surface. To solve the dual integral equations, the jumps of displacements across the crack surfaces were directly expanded as a series of Jacobi polynomials. The solution of the present paper shows that the singular stresses and the singular electric displacements at the crack tips in functionally graded piezoelectric materials carry the same forms as those in homogeneous piezoelectric materials; however, the magnitudes of intensity factors depend on the gradient of functionally graded piezoelectric material properties. It was also revealed that the crack shielding effect is also present in functionally graded piezoelectric materials.     

Nonlocal theory solution of two collinear cracks in the functionally graded materials

In this paper, the interaction of two collinear cracks in functionally graded materials subjected to a uniform anti-plane shear loading is investigated by means of nonlocal theory. The traditional concepts of the nonlocal theory are extended to solve the fracture problem of functionally graded materials. To make the analysis tractable, it is assumed that the shear modulus varies exponentially with the coordinate vertical to the crack. By use of the Fourier transform, the problem can be solved with the help of a pair of triple integral equations, in which the unknown variable is the displacement on the crack surfaces. To solve the triple integral equations, the displacement on the crack surfaces is expanded in a series of Jacobi polynomials. Unlike the classical elasticity solutions, it is found that no stress singularity is present near the crack tips. The nonlocal elastic solutions yield a finite hoop stress at the crack tip, thus allowing us to use the maximum stress as a fracture criterion in functionally graded materials. The magnitude of the finite stress field depends on the crack length, the distance between two cracks, the parameter describing the functionally graded materials and the lattice parameter of the materials.     

考虑尺度效应的夹层楔形多孔梁动力学分析

基于修正偶应力理论, 研究了具有大范围旋转中心刚体-功能梯度夹层Euler-Bernoulli楔形多孔柔性微梁系统的动力学特性.楔形梁是中间层为不完全功能梯度层, 两表层为均质材料的功能梯度夹层结构, 它可以减小传统夹层结构由于层与层之间材料属性的不同导致脱粘类型损伤的影响.采用假设模态法描述变形, 考虑具有捕捉动力刚化效应的非线性耦合项, 计及von Kármán几何非线性应变, 运用第二类Lagrange方程, 导出了适用于较大变形的高次刚柔耦合动力学方程.对在平面内做大范围运动的中心刚体-功能梯度夹层Euler-Bernoulli楔形多孔微梁的动力学特性进行了详细研究.研究表明: 功能梯度夹层楔形梁表层结构高度、旋转角速度、功能梯度幂指数、尺度参数、孔隙度以及各层结构的体积分数对系统的动力学特性都有很大的影响; 功能梯度夹层楔形梁综合了功能梯度直梁和楔形梁的特性, 其相对于功能梯度直梁的固有频率增大, 同时使得孔隙度对结构固有频率变化趋势的影响不再与功能梯度直梁相同; 由于柔性梁变形能中具有横向与轴向的耦合势能, 系统在稳态下的平衡位置发生了迁移现象; 系统随着尺度参数的变化发生了频率转向与振型转换.      

Stress Concentration Factor in Functionally Graded Plates with Circular Holes Subjected to Anti-plane Shear Loading

Stress concentration factors due to the presence of geometrical discontinuities (circular holes) in functionally graded plates are derived. The material property inhomogeneity is assumed to be in the radial direction originating at the center of the plate. Variable separable closed-form solutions are obtained for the stresses and displacements in functionally graded plates (without and with holes) subjected to anti-plane shear loading. The stresses in functionally graded plates without a hole are not homogeneous as it is in the case of homogeneous plates. Either a stress concentration (more than the applied stress) or dilution (less than the applied stress) occurs depending on whether the modulus increases (hardening graded material) or decreases (softening graded material) away from the center of the graded plate without a hole. A novel definition of the stress concentration factor due to the geometrical discontinuity in functionally graded plates is derived. The effect of the circular hole in functionally graded plates is to magnify (compared to homogeneous plates) the stress concentration when the modulus decreases away from the center of the hole (softening material). Beneficial reduction of the stress concentration factor is achieved in hardening functionally graded materials.     

Elasticity solutions for functionally graded plates in cylindrical bending

The plate theory of functionally graded materials suggested by Mian and Spencer is extended to analyze the cylindrical bending problem of a functionally graded rectangular plate subject to uniform load. The expansion formula for displacements is adopted. While keeping the assumption that the material parameters can vary along the thickness direction in an arbitrary fashion, this paper considers orthotropic materials rather than isotropic materials. In addition, the traction-free condition on the top surface is replaced with the condition of uniform load applied on the top surface. The plate theory for the particular case Of cylindrical bending is presented by considering an infinite extent in the y-direction. Effects of boundary conditions and material inhomogeneity on the static response of functionally graded plates are investigated through a numerical example.     

Thermal buckling of piezo-FGM shallow spherical shells

Thermal instability of shallow spherical shells made of functionally graded material (FGM) and surface-bonded piezoelectric actuators is studied in this paper. The governing equations are based on the first order theory of shells and the Sanders nonlinear kinematics equations. It is assumed that the property of the functionally graded materials vary continuously through the thickness of the shell according to a power law distribution of the volume fraction of the constituent materials. The constituent material of the functionally graded shell is assumed to be a mixture of ceramic and metal. The analytical solutions are obtained for three types of thermal loadings and constant applied actuator voltage. Results for simpler states are validated with the known data in literature.