Analysis for the thermoelastic bending of a functionally graded material cylindrical shell

An analytic study for thermoelastic bending of a functionally graded material (FGM) cylindrical shell subjected to a uniform transverse mechanical load and non-uniform thermal loads is presented. Based on the classical linear shell theory, the equations with the radial deflection and horizontal displacement are derived out. An arbitrary material property of the FGM cylindrical shell is assumed to vary through the thickness of the cylindrical shell, and exact solution of the problem is obtained by using an analytic method. For the FGM cylindrical shell with fixed and simply supported boundary conditions, the effects of mechanical load, thermal load and the power law exponent on the deformation of the FGM cylindrical shell are analyzed and discussed.     

功能梯度热释电材料平板柱形弯曲问题的精确解

采用状态空间法，假定材料常数沿厚度方向均按同一指数函数规律变化，获得了功能梯度热释电材料平板柱形弯曲问题的精确解。通过算例，分析了在机械荷载、电荷载和热荷载分别作用下，材料性质的不同梯度变化对平板结构响应的影响。     

非保守力下温度场中FGM圆板的非线性力学行为

研究了温度场中非保守功能梯度材料(FGM)圆板的非线性力学行为。基于经典板理论,推导了受非保守力作用的FGM圆板在温度场中的控制微分方程。采用打靶法分析了由陶瓷二氧化锆和金属钛合金两相材料组成的非保守FGM圆板在均匀和非均匀升温场中的非线性力学行为。给出了不同均匀升温和非均匀升温场下,FGM圆板在非保守载荷作用下的平衡路径和平衡构形。分析并讨论了均匀和非均匀升温、材料梯度指数对非保守圆板过屈曲和弯曲行为的影响。结果表明:温度场中,非保守FGM圆板发生弯曲而纯陶瓷圆板会发生过屈曲行为;当梯度指数p=2,非保守载荷q=52时,均匀升温场中非保守圆板的变形大于非均匀升温场中非保守圆板的变形。     

Analytical solutions for single- and multi-span functionally graded plates in cylindrical bending

A recently developed plate theory using the concept of shape function of the transverse coordinate parameter is extended to determine the stress distribution in an orthotropic functionally graded plate subjected to cylindrical bending. The transfer matrix method is presented to derive the shape function. The equations governing the plate deformation are then solved analytically using the transfer matrix method for arbitrary boundary conditions. For a simply supported functionally graded plate, a comparison of the present solution with the exact elasticity solution, the first- and third-order shear deformation plate theories is presented and discussed. It is demonstrated that the present method yields more accurate stresses than the first- and third-order shear deformation theories. The effect of boundary conditions and inhomogeneity of material on the displacements and stresses in functionally graded plates are investigated. A multi-span functionally graded plate with arbitrary boundary conditions is further considered to demonstrate the efficiency of the present method.     

On asymmetric bending of functionally graded solid circular plates

Based on the three-dimensional elasticity equations, this paper studies the elastic bending response of a transversely isotropic functionally graded solid circular plate subject to transverse biharmonic forces applied on its top surface. The material properties can continuously and arbitrarily vary along the thickness direction. By virtue of the generalized England’s method, the problem can be solved by determining the expressions of four analytic functions. Expanding the transverse load in Fourier series along the circumferential direction eases the theoretical construction of the four analytic functions for a series of important biharmonic loads. Certain boundary conditions are then used to determine the unknown constants that are involved in the four constructed analytic functions. Numerical examples are presented to validate the proposed method. Then, we scrutinize the asymmetric bending behavior of a transversely isotropic functionally graded solid circular plate with different geometric and material parameters.     

Torsional buckling and postbuckling of FGM cylindrical shells in thermal environments

A postbuckling analysis is presented for a functionally graded cylindrical shell subjected to torsion in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation theory with a von Kármán–Donnell-type of kinematic non-linearity. The non-linear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling load and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of twist, perfect and imperfect, FGM cylindrical shells under different sets of thermal fields. The results reveal that the volume fraction distribution of FGMs has a significant effect on the buckling load and postbuckling behavior of FGM cylindrical shells subjected to torsion. They also confirm that the torsional postbuckling equilibrium path is weakly unstable and the shell structure is virtually imperfection–insensitive.     

功能梯度板弯曲和自由振动分析的简单精化板理论

论文提出了一种可用于分析功能梯度板弯曲和自由振动行为的简单精化板理论.该理论分析功能梯度板的弯曲时只需三个未知量，而分析功能梯度板的自由振动时只需一个未知量.与包含三个未知量的经典板理论相比，论文提出的简单精化板理论考虑了横向剪切效应，提高了计算准确度.与一阶剪切变形板理论不同，该简单精化板理论引入了多项式型剪切应变函数，满足板上下表面剪切应力为零的边界条件，因此不需要剪切修正.通过与已有文献的比较，验证了该简单精化板理论的准确性和便捷性，并基于该简单精化板理论研究了功能梯度板的弯曲和自由振动力学行为.     

AXISYMMETRIC BENDING OF TWO-DIRECTIONAL FUNCTIONALLY GRADED CIRCULAR AND ANNULAR PLATES

Assuming the material properties varying with an exponential law both in the thick- ness and radial directions,axisymmetric bending of two-directional functionally graded circular and annular plates is studied using the semi-analytical numerical method in this paper.The de- flections and stresses of the plates are presented.Numerical results show the well accuracy and convergence of the method.Compared with the finite element method,the semi-analytical nu- merical method is with great advantage in the computational efficiency.Moreover,study on ax- isymmetric bending of two-directional functionally graded annular plate shows that such plates have better performance than those made of isotropic homogeneous materials or one-directional functionally graded materials.Two-directional functionally graded material is a potential alter- native to the one-directional functionally graded material.And the integrated design of materials and structures can really be achieved in two-directional functionally graded materials.     

Stability analysis of functionally graded rectangular plates under nonlinearly varying in-plane loading resting on elastic foundation

In this research work, an exact analytical solution for buckling of functionally graded rectangular plates subjected to non-uniformly distributed in-plane loading acting on two opposite simply supported edges is developed. It is assumed that the plate rests on two-parameter elastic foundation and its material properties vary through the thickness of the plate as a power function. The neutral surface position for such plate is determined, and the classical plate theory based on exact neutral surface position is employed to derive the governing stability equations. Considering Levy-type solution, the buckling equation reduces to an ordinary differential equation with variable coefficients. An exact analytical solution is obtained for this equation in the form of power series using the method of Frobenius. By considering sufficient terms in power series, the critical buckling load of functionally graded plate with different boundary conditions is determined. The accuracy of presented results is verified by appropriate convergence study, and the results are checked with those available in related literature. Furthermore, the effects of power of functionally graded material, aspect ratio, foundation stiffness coefficients and in-plane loading configuration together with different combinations of boundary conditions on the critical buckling load of functionally graded rectangular thin plate are studied.     

Nonlinear buckling of torsion-loaded functionally graded cylindrical shells in thermal environment

Based on the nonlinear large deflection theory of cylindrical shells, this paper deals with the nonlinear buckling problem of functionally graded cylindrical shells under torsion load by using the energy method and the nonlinear strain–displacement relations of large deformation. The material properties of the functionally graded shells vary smoothly through the shell thickness according to a power law distribution of the volume fraction of the constituent materials. Meanwhile, on the base of taking the temperature-dependent material properties into account, various effects of external thermal environment on the critical state of the shell are also investigated. Numerical results show various effects of the inhomogeneous parameter, the dimensional parameters and external thermal environment on nonlinear buckling of functionally graded cylindrical shells under torsion. The present theoretical results are verified by those in literature.     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

Nonlinear bending and post-buckling of a functionally graded circular plate under mechanical and thermal loadings

Based on the classical nonlinear von Karman plate theory, axisymmetric large deflection bending of a functionally graded circular plate is investigated under mechanical, thermal and combined thermal–mechanical loadings, respectively, and axisymmetric thermal post-buckling behavior of a functionally graded circular plate is also investigated. The mechanical and thermal properties of functionally graded material (FGM) are assumed to vary continuously through the thickness of the plate, and obey a simple power law of the volume fraction of the constituents. Governing equations for the problem are derived, and then a shooting method is employed to numerically solve the equations. Effects of material constant n and boundary conditions on the temperature distribution, nonlinear bending, critical buckling temperature and thermal post-buckling behavior of the FGM plate are discussed in details.     

平行于功能梯度材料夹层的币型裂纹起裂条件

分析了功能梯度材料中币型裂纹的扩展问题．裂纹平行于无限域中功能梯度材料夹层,受有与裂纹面成任意角度的拉应力．假定功能梯度材料夹层与两个半无限域均匀介质完全粘合,其弹性模量沿厚度方向变化．采用基于层状材料广义Kelvin基本解的边界元方法分析裂纹问题,给出了均布正应力和剪应力作用下裂纹的应力强度因子、将应力强度因子耦合于应变能密度断裂判据,讨论了裂纹体在拉伸应力作用下的起裂条件．     

Thermoelastic buckling behavior of thick functionally graded rectangular plates

Thermoelastic buckling behavior of thick rectangular plate made of functionally graded materials is investigated in this article. The material properties of the plate are assumed to vary continuously through the thickness of the plate according to a power-law distribution. Three types of thermal loading as uniform temperature raise, nonlinear and linear temperature distribution through the thickness of plate are considered. The coupled governing stability equations are derived based on the Reddy’s higher-order shear deformation plate theory using the energy method. The resulted stability equations are decoupled and solved analytically for the functionally graded rectangular plates with two opposite edges simply supported subjected to different types of thermal loading. A comparison of the present results with those available in the literature is carried out to establish the accuracy of the presented analytical method. The influences of power of functionally graded material, plate thickness, aspect ratio, thermal loading conditions and boundary conditions on the critical buckling temperature of aluminum/alumina functionally graded rectangular plates are investigated and discussed in detail. The critical buckling temperatures of thick functionally graded rectangular plates with various boundary conditions are reported for the first time and can be served as benchmark results for researchers to validate their numerical and analytical methods in the future.     

Postbuckling of FGM cylindrical shells under combined axial and radial mechanical loads in thermal environments

A postbuckling analysis is presented for a shear deformable functionally graded cylindrical shell of finite length subjected to combined axial and radial loads in thermal environments. Heat conduction and temperature-dependent material properties are both taken into account. The temperature field considered is assumed to be a uniform distribution over the shell surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The formulations are based on a higher order shear deformation shell theory with von Kármán–Donnell-type of kinematic nonlinearity. A boundary layer theory of shell buckling, which includes the effects of nonlinear prebuckling deformations, large deflections in the postbuckling range, and initial geometric imperfections of the shell, is extended to the case of functionally graded cylindrical shells. A singular perturbation technique is employed to determine the interactive buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect cylindrical shells with two constituent materials subjected to combined axial and radial mechanical loads and under different sets of thermal environments. The results reveal that the temperature field and volume fraction distribution have a significant effect on the postbuckling behavior, but they have a small effect on the imperfection sensitivity of the functionally graded shell.     

Mechanical and thermal postbuckling of FGM thick circular cylindrical shells reinforced by FGM stiffener system using higher-order shear deformation theory

The postbuckling of the eccentrically stiffened circular cylindrical shells made of functionally graded materials(FGMs),subjected to the axial compressive load and external uniform pressure and filled inside by the elastic foundations in the thermal environments,is investigated with an analytical method.The shells are reinforced by FGM stringers and rings.The thermal elements of the shells and stiffeners in the fundamental equations are considered.The equilibrium and nonlinear stability equations in terms of the displacement components for the stiffened shells are derived with the third-order shear deformation theory and Leckhniskii smeared stiffener technique.The closed-form expressions for determining the buckling load and postbuckling load-deflection curves are obtained with the Galerkin method.The effects of the stiffeners,the foundations,the material and dimensional parameters,and the pre-existent axial compressive and thermal load are considered.     

Three-dimensional elastostatic solutions for transversely isotropic functionally graded material plates containing elastic inclusion

Based on the generalized England-Spencer plate theory, the equilibrium of a transversely isotropic functionally graded plate containing an elastic inclusion is studied. The general solutions of the governing equations are expressed by four analytic functions α(ζ), β(ζ), φ(ζ), and ψ(ζ) when no transverse forces are acting on the surfaces of the plate. Axisymmetric problems of a functionally graded circular plate and an infinite func-tionally graded plate containing a circular hole subject to loads applied on the cylindrical boundaries of the plate are firstly investigated. On this basis, the three-dimensional (3D) elasticity solutions are then obtained for a functionally graded infinite plate containing an elastic circular inclusion. When the material is degenerated into the homogeneous one, the present elasticity solutions are exactly the same as the ones obtained based on the plane stress elasticity, thus validating the present analysis in a certain sense.     

Two new refined shear displacement models for functionally graded sandwich plates

Two refined displacement models, RSDT1 and RSDT2, are developed for a bending analysis of functionally graded sandwich plates. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The developed models are variationally consistent, have strong similarity with classical plate theory in many aspects, do not require shear correction factor, and give rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress-free surface conditions. The accuracy of the analysis presented is demonstrated by comparing the results with solutions derived from other higher-order models. The functionally graded layers are assumed to have isotropic, two-constituent material distribution through the thickness, and the modulus of elasticity, Poisson’s ratio of the faces, and thermal expansion coefficients are assumed to vary according to a power-law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic ceramic material. Numerical results for deflections and stresses of functionally graded metal–ceramic plates are investigated. It can be concluded that the proposed models are accurate and simple in solving the bending behavior of functionally graded plates.     

功能梯度板动力分析的光滑有限元法研究

为提高功能梯度板动响应问题求解精度,基于一阶剪切变形板理论,提出了求解功能梯度板自由振动问题的Cell-Based 光滑有限元格式．功能梯度板材料属性沿厚度方向呈梯度连续变化,计算系统刚度矩阵时在光滑域内进行光滑梯度操作,可提高求解精度．采用Cell-Based 光滑有限元法,讨论了长厚比、形状因子和边界条件对两种典型功能梯度方板无量纲频率参数的影响,并与FEM法的解和文献中的解做了对比．数值算例的结果表明,光滑梯度操作可改善有限元系统的刚度,Cell-Based 光滑有限元法的计算结果更加逼近真实解,从而为功能梯度材料的进一步应用打下基础．     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。