旋转碰摩板热冲击振动的解析法研究

提出了热冲击和碰摩故障共同作用下的旋转悬臂板系统动力特性解析解法. 基于变分原理,推导出考虑碰摩力沿宽度方向差异性的薄板系统运动微分方程,将该方程的解分解为热冲击悬臂板准静态解和碰摩薄板热冲击动力解. 通过计算旋转悬臂板的模态特性和温度分布函数,获得了碰摩叶片旋转悬臂板模型的热冲击振动解析解,讨论分析得出热冲击和碰摩故障对薄板振动的影响规律. 研究表明:碰摩振动表现为复杂的多频率耦合振动,高频振动较为显著;热冲击振动表现为简单的低频振动形式,强烈的热冲击导致碰摩薄板趋于低频振动. 碰摩引起的振动形式较热冲击故障更加复杂,更容易引起叶片的破坏. 增大的摩擦系数加剧了碰摩引起的振动,利用减小表面粗糙程度等方法降低摩擦系数,可以达到减小碰摩破坏程度的目的.      

中心刚体-旋转悬臂板耦合系统碰摩动力特性解析法研究

针对大型旋转机械叶片与机壳间发生的碰摩故障,建立了中心刚体-旋转悬臂板耦合系统碰摩动力学模型,考虑了离心刚化效应,利用Hamilton原理推导出运动微分方程。基于实验和有限元分析碰摩力的结果,给出了碰摩力的近似数学表达式,得到了系统振动响应解析解,通过与文献中实验结果的对比,验证了模型及方法的准确性,讨论了叶片梁模型和薄板模型在不同点碰摩及线碰摩情况下各自的适用范围,分析了转速对碰摩动力响应的影响。结果表明：论文解析解具有较高精度;薄板模型能够更全面地反映叶片各种不同碰摩情况下的动力特性,比梁模型更准确、可靠;随着转速的增大,碰摩力导致薄板自由端幅值突变,这是引发工程中叶片掉角,甚至折断的重要原因。     

Non-linear dynamic response of a rotating radial Timoshenko beam with periodic pulse loading at the free-end

Consideration is given to the dynamic response of a Timoshenko beam under repeated pulse loading. Starting with the basic dynamical equations for a rotating radial cantilever Timoshenko beam clamped at the hub in a centrifugal force field, a system of equations are derived for coupled axial and lateral motions which includes the transverse shear and rotary inertia effects, as well. The hyperbolic wave equation governing the axial motion is coupled with the flexural wave equation governing the lateral motion of the beam through the velocity-dependent skew-symmetric Coriolis force terms. In the analytical formulation, Rayleigh-Ritz method with a set of sinusoidal displacement shape functions is used to determine stiffness, mass and gyroscopic matrices of the system. The tip of the rotating beam is subjected to a periodic pulse load due to local rubbing against the outer case introducing Coulomb friction in the system. Transient response of the beam with the tip deforming due to rub is discussed in terms of the frequency shift and non-linear dynamic response of the rotating beam. Numerical results are presented for this vibro-impact problem of hard rub with varying coefficients of friction and the contact-load time. The effects of beam tip rub forces transmitted through the system are considered to analyze the conditions for dynamic stability of a rotating blade with intermittent rub.     

Nonlinear vibrations of blade with varying rotating speed

This paper investigates the nonlinear dynamic responses of the rotating blade with varying rotating speed under high-temperature supersonic gas flow. The varying rotating speed and centrifugal force are considered during the establishment of the analytical model of the rotating blade. The aerodynamic load is determined using first-order piston theory. The rotating blade is treated as a pretwist, presetting, thin-walled rotating cantilever beam. Using the isotropic constitutive law and Hamilton??s principle, the nonlinear partial differential governing equation of motion is derived for the pretwist, presetting, thin-walled rotating beam. Based on the obtained governing equation of motion, Galerkin??s approach is applied to obtain a two-degree-of-freedom nonlinear system. From the resulting ordinary equation, the method of multiple scales is exploited to derive the four-dimensional averaged equation for the case of 1:1 internal resonance and primary resonance. Numerical simulations are performed to study the nonlinear dynamic response of the rotating blade. In summary, numerical studies suggest that periodic motions and chaotic motions exist in the nonlinear vibrations of the rotating blade with varying speed.     

旋转中心刚体-FGM梁刚柔热耦合动力学特性研究

对旋转中心刚体-功能梯度材料(functionally graded material,FGM)梁刚柔热耦合动力学特性进行研究.FGM梁为物理性能参数沿厚度方向呈幂律分布的欧拉伯努利梁.考虑柔性梁的横向弯曲变形和轴向拉伸变形, 并计入横向弯曲变形引起的纵向缩短,即非线性耦合变形量.考虑变截面空心梁在外部高温、内冷通道冷却情况下的热力耦合对系统动力学特性的影响,求解得到FGM梁沿厚度方向分布的温度场, 进而在本构关系中计入热应变.采用假设模态法对柔性梁变形场进行离散,运用第二类拉格朗日方程推导得到系统的刚柔热耦合动力学方程,并编制动力学仿真软件, 然后通过仿真算例对系统的动力学问题进行研究.结果表明:不同截面梁动力学响应差异较大, 因此需对实际系统合理建模;大范围运动已知时, 考虑热冲击载荷的FGM梁将有效抑制横向弯曲变形,而大范围运动恒定时随热冲击的叠加会出现高频振荡; 大范围运动未知时,外力矩和热冲击载荷相互作用产生热力耦合效应, 导致系统呈现高频振荡,同时与中心刚体大范围旋转运动产生刚柔热耦合效应.      

Bifurcation and dynamic behavior analysis of a rotating cantilever plate in subsonic airflow

Turbo-machineries, as key components, have wide applications in civil, aerospace, and mechanical engineering. By calculating natural frequencies and dynamical deformations, we have explained the rationality of the series form for the aerodynamic force of the blade under the subsonic flow in our earlier studies. In this paper, the subsonic aerodynamic force obtained numerically is applied to the low pressure compressor blade with a low constant rotating speed. The blade is established as a pre-twist and presetting cantilever plate with a rectangular section under combined excitations, including the centrifugal force and the aerodynamic force. In view of the first-order shear deformation theory and von-Kármán nonlinear geometric relationship, the nonlinear partial differential dynamical equations for the warping cantilever blade are derived by Hamilton's principle. The second-order ordinary differential equations are acquired by the Galerkin approach. With consideration of 1:3 internal resonance and 1/2 sub-harmonic resonance, the averaged equation is derived by the asymptotic perturbation methodology. Bifurcation diagrams, phase portraits, waveforms, and power spectrums are numerically obtained to analyze the effects of the first harmonic of the aerodynamic force on nonlinear dynamical responses of the structure.     

带集中质量的旋转柔性曲梁动力学特性分析

本文对带集中质量的平面内旋转柔性曲梁动力学特性进行了研究.基于绝对节点坐标法推导出曲梁单元,其中该曲梁单元采用Green-Lagrangian应变,并根据曲梁变形前后的曲率变化和曲率的精确表达式计算了曲梁单元弹性力所作的虚功.通过虚功原理,利用$\delta$函数和中心刚体与悬臂曲梁之间的固支边界条件,建立了带集中质量的旋转柔性曲梁非线性动力学模型.基于该模型,本文仿真计算了悬臂曲梁的纯弯曲问题和带有刚柔耦合效应的旋转柔性曲梁动力学响应问题,以此分别讨论了所提出曲梁单元的收敛性和动力学模型的正确性.进一步应用D'Alembert原理,将旋转曲梁等效为带离心力的无旋转曲梁,通过线性摄动处理得到系统的特征方程,以此分别研究了旋转角速度、初始曲率和集中质量对曲梁动力学特性的影响.最后重点分析了旋转曲梁的频率转向和振型切换问题,并阐述了两者之间的相互关系.研究结果表明:随着旋转角速度的增大,曲梁的频率特性与直梁的频率特性相近,以及曲梁拉伸变形占主导的模态振型会提前.      

APPROXIMATE THEORY AND ANALYTICAL SOLUTION FOR DYNAMIC CALCULATION OF VISCOELASTIC LAYERED PERIODIC PLATE

由于周期性隔振结构动力计算中较少考虑轨道交通载荷及材料黏弹性,因此,本文以黏弹性层状周期板为研究对象,提出了垂向移动简谐载荷下,可以考虑材料黏弹性及板内横向剪切变形的黏弹性层状周期板动力计算近似理论并给出解析解答.设板中性面的横向剪切变形为横截面的整体剪切变形,利用Reissner-Mindlin假设及提出的剪切变形补充计算条件,得到了中性面法线转角与中性面剪应力的关系.基于平衡方程和应力连续条件,建立了黏弹性层状周期板振动控制方程,推导了对边简支对边自由条件下,板垂向位移的简化Fourier级数形式解.与经典层合板模型和有限元计算结果进行了比较,验证了本文解答的有效性.结果表明：（1）黏弹性层状周期板可以显著降低单一材料板在自振频率处的振动响应,但会引起局部低频频段的振动放大;（2）板的垂向位移随着载荷速度的增大而增大,当载荷速度超过300 km/h后,其对板振动响应的影响减弱;（3）黏弹性层剪切模量存在最佳设计值,可使结构的隔振性能最佳;（4）黏弹性层的阻尼特性在低频范围内对结构振动影响较小;（5）可在满足工程实际的情况下适当增加板长,以提高结构的隔振性能.     

Nonlinear friction dynamics on fibrous materials,application to the characterization of surface quality. Part I: global characterization of phase spaces

The diversity and the complexity of fibrous materials (woven fabrics, nonwovens or knitted fabrics) make the control of surface qualities very difficult. The control and the comprehension of the tribological phenomena generated by a dynamic friction are of major importance. Whereas the traditional investigations such as measurements of average parameters like roughness or friction coefficient quickly find their limits on such deformable, heterogeneous and flexible fibrous surfaces with very heterogeneous relief, this series of two publications proposes a new manner of observing the interactions of friction. Our laboratory has developed a patented method of measurements, called MODALSENS, which aims at rubbing a very fine and flexible blade on the analyzed surface. Dynamic friction with the contact generates nonlinear vibrations, and the response of the sensor is analyzed in its phase space using the tools of nonlinear analysis of time series. Then, when the evaluated surfaces change, this first part endeavors to characterize the portraits of phases related to the nonlinear vibrations of MODALSENS in a global way, by quantifying its invariants such as dimensions, Shannon entropies, diameters of attractors and largest Lyapunov exponents. From this first part, a classification of studied fibrous surfaces is built and is expected to give rise to new estimators for the surface quality analysis of fibrous media.     

Nonlinear vibration of a rotating cantilever beam in a surrounding magnetic field

The nonlinear vibrations of a rotating cantilever beam made of magnetoelastic materials surrounded by a uniform magnetic field are investigated. The kinetic energy, potential energy and work done by the electromagnetic force are obtained. A nonlinear dynamic model, based on the Hamilton principle, which includes the stretching vibration and bending vibration is presented. The Galerkin method is adopted to discretize the dynamic equations. The proposed method is validated by comparison with the literature. The nonlinear behaviors of the responses are studied. Then simulations for different kinds of magnetic field are conducted. The effects of magnetic field parameters, including the amplitude, plane angle, spatial angle and time-varying frequency, on the dynamic behaviors of the stretching motion and bending motion are investigated in detail. The results illustrate that the interaction effects between the rotating cantilever beam and the magnetic field will increase the vibration amplitude and fluctuation of the beam. In particular, we found that: collinear magnetic fields with equal amplitude lead to the same dynamic responses; the amplitude of magnetic field intensity increases the dynamic responses remarkably; the response amplitude changes nonlinearly with the plane angle and spatial angle of the magnetic field; and the increase of time-varying frequency enhances dynamic responses of the rotating cantilever beam.     

Bifurcation and dynamic response analysis of rotating blade excited by upstream vortices

A reduced model is proposed and analyzed for the simulation of vortex-induced vibrations (VIVs) for turbine blades. A rotating blade is modelled as a uniform cantilever beam, while a van der Pol oscillator is used to represent the time-varying characteristics of the vortex shedding, which interacts with the equations of motion for the blade to simulate the fluid-structure interaction. The action for the structural motion on the fluid is considered as a linear inertia coupling. The nonlinear characteristics for the dynamic responses are investigated with the multiple scale method, and the modulation equations are derived. The transition set consisting of the bifurcation set and the hysteresis set is constructed by the singularity theory and the effects of the system parameters, such as the van der Pol damping. The coupling parameter on the equilibrium solutions is analyzed. The frequency-response curves are obtained, and the stabilities are determined by the Routh-Hurwitz criterion. The phenomena including the saddle-node and Hopf bifurcations are found to occur under certain parameter values. A direct numerical method is used to analyze the dynamic characteristics for the original system and verify the validity of the multiple scale method. The results indicate that the new coupled model is useful in explaining the rich dynamic response characteristics such as possible bifurcation phenomena in the VIVs.     

THE SHEAR LAG EFFECT OF BOX BEAMS WITH VARYING LATERAL LOADING LOCATIONS 1)

对箱梁各翼板(顶板、悬臂板、底板)分设不同剪力滞广义纵向位移,其横向分布均取二次抛物线形式,并引入载荷横向位置参数η,以分析载荷横向变位对剪力滞效应的影响.运用能量变分原理,建立剪力滞控制微分方程,求解了简支梁和悬臂梁在均布载荷作用下的控制微分方程的解.算例分析表明:载荷横向变位改变直接承受载荷的翼板的正负剪力滞特性,对非直接承载翼板只改变其应力幅度;箱梁横向框架效应对直接承载翼板纵向应力的贡献远远大于剪切变形.与块体有限元分析结果较吻合,表明该算法能较准确分析载荷横向变位作用下箱梁剪力滞的变化规律.     

风力机叶片非线性挥舞分析

将风力机叶片简化为绕轮毂旋转的变截面Euler-Bernoulli悬臂梁,基于Greenberg公式给出非线性气动力,建立叶片挥舞振动非线性控制方程.由于变截面梁的弯曲刚度和线密度是沿梁轴线变化的函数,无法给出模态函数解析式,论文提出使用假设模态法计算的模态函数,作为基函数对控制方程进行Galerkin截断,通过将挥舞振动分解为静态位移和动态扰动合成,对其进行动态响应分析,同时讨论了叶轮转速、风速和旋转位置对振动特性的影响.研究表明:(1)叶轮转速对叶片挥舞特性影响显著,风速和叶片转角对振动特性影响很小.(2)静态位移随风速增加而增大,大体上成线性关系,气动阻尼随风速增加而减小.(3)风速较低时,非线性挥舞振动表现为衰减振动,随着风速增加,振动由衰减振动演化为周期运动,再由周期运动演化为拟周期运动.     

Natural vibrations of a cantilever thin elastic orthotropic cylindrical shell

The natural vibrations of a cantilever thin elastic orthotropic circular cylindrical shell are studied. Dispersion equations for the determination of possible natural frequencies of cantilever closed shells and open shells with Navier hinged boundary conditions at the longitudinal edges are derived from the classical dynamic theory of orthotropic cylindrical shells. It is proved that there are asymptotic relationships between these problems and the problems for a cantilever orthotropic strip plate and for a cantilever rectangular plate and the eigenvalue problem for a semi-infinite closed orthotropic cylindrical shell with free end and for the same but open shell with Navier hinged boundary conditions at the longitudinal edges. A procedure to identify types of vibrations is presented. Orthotropic cylindrical shells with different radii and lengths are used as an example to find approximate values of the dimensionless natural frequency and damping factor for vibration modes __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 5, pp. 68–91, May 2008.     

THERMAL SHOCK PROTECTION BASED ON MICROTUBE AND MICROPOST ARRAY SURFACE

针对核电站核泵主轴、管道系统等高温环境下工作的部件受冷却水热冲击而容易出现裂纹的问题,提出通过表面微结构设计,利用水低热扩散率的特性,在被热冲击表面产生隔热水膜,从而降低瞬态热冲击过程中表层结构的热应力,防止结构热疲劳损伤. 针对这一设想,采用有限元与无限元相结合的办法,解决热应力分析的多尺度问题. 利用COMSOL多场耦合分析软件,对瞬态热冲击条件下,表面微结构的温度场与热应力分布进行分析,研究了冲击时间、微结构几何参数和流体黏性底层厚度等对微结构表面热冲击防护能力的影响. 研究发现,表面微柱或微管结构对降低短时间冷水冲击产生的表面热应力具有显著效果,同时在微结构与基底之间存在最优过渡曲面使表面热应力最小化.     

热环境中旋转运动功能梯度圆板的强非线性固有振动

研究热环境中旋转运动功能梯度圆板的非线性固有振动问题．针对金属－陶瓷功能梯度圆板，考虑几何非线性、材料物理属性参数随温度变化以及材料组分沿厚度方向按幂律分布的情况，应用哈密顿原理推得热环境中旋转运动功能梯度圆板的非线性振动微分方程．考虑周边夹支边界条件，利用伽辽金法得到了横向非线性固有振动方程，并确定了静载荷引起的静挠度．用改进的多尺度法求解强非线性方程，得出非线性固有频率表达式．通过算例，分析了旋转运动功能梯度圆板固有频率随转速、温度等参量的变化情况．结果表明，非线性固有频率随金属含量的增加而降低；随转速和圆板厚度的增大而升高；随功能梯度圆板表面温度的升高而降低．     

旋转叶片滚子式动力吸振器基本原理和特性

讨论了一种可用于旋转叶片的动力吸振器基本原理和动态特性。文中首先说明了这种以滚子滚动作为辅助系统的动力吸振器结构和力学模型,建立了吸振器数学模型并进行了相应的数学分析;然后说明了这种滚子式动力吸振器可随叶片旋转速度变化的自调谐特性,讨论了有关自调谐特性的性质。研究表明,这种新型的滚子式动力吸振器结构紧凑,具有随叶片旋转速度变化的自调谐功能,可以用于旋转叶片的减振问题。最后,文中研究和分析了这种吸振系统频率特性,表明这种系统也具有特殊的“频率转向”特性,反映了系统不同模态间的耦合性质。     

条带式太阳帆的结构动力学分析

依靠光压推进,太阳帆被认为是最可行的星际探测航天器,太阳帆结构总体方案主要有两类:桅杆式和旋转式,其中,帆膜被分割成窄条的条带式太阳帆在桅杆式太阳帆中具有较为理想的结构效率,如何准确计算条带式太阳帆的结构动力学特性值得研究.本文对条带式太阳帆结构的振动特性和结构稳定性进行研究,将太阳帆看作是由若干个桅杆-膜带组件依次连接而成的整体结构,桅杆-膜带组件由4根桅杆段和4条薄膜条带组成,分段轴压作用下的桅杆与薄膜条带耦合振动.考虑帆面薄膜条带与支撑桅杆之间的耦合振动,采用分布传递函数法建立了的条带式太阳帆的结构动力学模型,推导了条带式太阳帆结构自由振动和失稳载荷的求解方法.研究表明:条带式太阳帆构型有利于提高太阳帆结构的整体刚度和结构稳定性,随着帆面薄膜条带数目的增加,太阳帆结构的振动频率和失稳载荷增大;随着帆面薄膜预应力的增大,太阳帆结构振动的基频减小,稳定性变差;随着支撑桅杆刚度的提高,太阳帆结构整体的振动频率和失稳载荷增大.本文建立的解析求解方法具有求解效率快和精度高的特点,为条带式太阳帆的结构设计和姿态控制提供了有力的分析工具.      

轴对称热载作用厚板的热弹性运动效应分析

对板的上下表面存在一般温度边界条件的情况，解出了板表面受轴对称热辐射作用时，板内轴对称二维瞬态温度场的一般表达式；导出了厚板的热弯曲运动和热平面运动的位移型动力学方程，得出了板的挠度、转角和平面径向位移的无穷积分型公式；提出了一个求解弯曲波传播速度的方法；然后完成了一个代表性算例分析，给出了弯曲波传播规律的直观图象，得出了热加载和热卸载过程中，板内热弯曲波的时空变化特点；找出了剪切变形和旋转惯性对弯曲波传播速度的影响规律；最后，将理论结果与相应的实验结果进行了比较，两者吻合良好。     

黏弹性层合悬臂薄壁圆柱壳的模态特性研究

基于薄壳理论和黏弹性理论, 得出了黏弹性层合悬臂薄壁圆柱壳模态特性的半解析解. 根据乐甫薄壳理论, 建立了基层和黏弹性阻尼层薄壁圆柱壳的一阶状态微分方程, 结合黏弹性阻尼层的变形协调关系和层间作用力关系, 利用传递矩阵法得出了整体结构的传递矩阵, 采用高精度的精细积分法得出了固有频率、模态损耗因子和三维模态振型, 最后通过有限元法进行了比较, 通过算例验证了传递矩阵法对黏弹性层合薄壁圆柱壳模态特性研究的有效性.