桅杆风致破坏机理研究

桅杆风致破坏的情况屡见不鲜。桅杆的非线性是相当复杂的,它是由拉索的几何非线性和拉索的张力产生的,拉索的张力又依赖于拉索的几何位置。研究指出由于在经常性风荷载作用下,桅杆产生空间混沌振动,并由此产生疲劳破坏的结果,但这些研究仅限于确定性情况。本文中将研究扩展到随机问题,数值计算结果表明该系统存在随机混沌现象,其响应平均值与平均应力指出混沌性质。为了进一步研究桅杆破坏机理,因此在本文中,既考虑突发性故障问题,又考虑随机疲劳寿命问题,并给出时间与应力极值概率。     

冲击波荷载作用下拉线塔的非线性动力分析

拉线塔是一种含有柔索的非线性结构。在冲击波荷载作用下,拉线塔在三维空间内会产生大范围的非线性位移,用工程上常用的模型简化方法来分析大变形拉线塔的误差比较大。本文采用非线性有限元法编制的可在微机上运行的拉线塔非线性静、动力分析程序,计算了单根柔索的阶跃冲击响应与冲击波荷载作用下拉线塔的非线性几何大变形动力响应,计算结果与有关文献的计算结果以及试验结果非常吻合。     

PATH INTEGRAL SOLUTION OF NONLINEAR DYNAMIC BEHAVIOR OF STRUCTURE UNDER WIND EXCITATION

IntroductionThe dynamic behavior of the nonlinear structure under wind excitation has beenobserved very complicated.Taking guyed masts as an example,only a few collapsingaccidents occurred under extreme atmospheric conditions[1],many took place under mild…     

桅杆结构静力分析简化计算方法

通过整体分析,推导出空间单索在任意荷载作用下的静力计算公式和空间索单元的非线性刚度方程,在此基础上,给出桅杆结构静力分析简化计算的非线性方程式。     

盘绕式杆状展开机构的设计与力学分析

盘绕式杆状展开机构具有质量轻、收拢比大,伸缩平稳,展开可靠性高等优点,可广泛用于太阳电池阵、大型天线的展开,作为主要的展开支撑受力构件,展开机构在整个结构系统中起顶梁柱的作用。本文通过对盘绕式展开机构原理样机的研制,从设计角度对盘绕式杆状展开机构的构造特点、设计方案和展开/收拢原理进行了阐述,对其关键几何设计参数进行了分析。根据展开和收拢几何特性关系,对其刚度特性进行了分析,并依据弹性稳定理论,对该展开机构进行了局部和整体稳定性分析。设计参数分析和刚度特性分析对盘绕式展开机构原理样机的研制和关键技术的解决有较大的借鉴意义。     

Modeling and Algorithm on a Class of Mechanical Systems with Unilateral Constraints

In the present paper, the cable-structures are considered as a class of mechanical complementary-slackness systems. Based on the optimization algorithms used for multi-body dynamics with unilateral contacts, an algorithm by means of artificial neural network (NNW) is developed. The following two classes of cable-structures have been considered force-elongation of cable member follows elastic behavior and work-hardening assumption. Due to simplicity the former is used to prove the method reliability, and the latter, as general cable-structure problem is handled. First, the complementarity problems for those structures have been formulated; then using generalized Gaussian‘ least action principle they are summarized as an optimization problem. Based on Hopfield’s work, an artificial NNW has been designed and used to decide combination of possible constraints at each step in simulation. As examples, two cable-structures have been investigated. The calculated results for a simple suspension structure evidence the reliability and time-economization of the proposed method. An example of guyed mast shows the suitability of the proposed method for practical cable-structures.This paper supported by NSFC, No.10072040     

Nonlinear network modeling of multi-module floating structures with arbitrary flexible connections

Multiple floating modules connected by flexible connectors can be viewed as a network structure. A standard modeling process for multi-module floating structures in arbitrary topology is presented by using network theory. A three-dimensional model is developed using the linear wave theory, dynamic model of single floating module, constitutive model of flexible connectors and model of a mooring system. As a typical application, a floating airport model is established and further its nonlinear dynamic responses and connector loads are analyzed. Numerical results show that the traditional linear analysis may underestimate the actual results. The methodology applied in this paper is extensible to many engineering problems with network structures alike.     

ANALYSIS OF NONLINEAR DYNAMIC RESPONSE FOR VISCOELASTIC COMPOSITE PLATE WITH TRANSVERSE MATRIX CRACKS

I. INTRODUCTION The composite material and the composite structure are liable to generate damage during manufactureand under load, which will lead to a decrease of the material and structure’s mechanical properties.It is accepted that there exist four…     

深海采矿柔性立管系统非线性有限元模拟

在海洋环境载荷及集矿机牵引作用下,深海采矿柔性立管系统的动力学响应涉及几何非线性和非保守载荷的双重非线性源.基于三维固体有限变形理论建立数学模型,在完全拉格朗日格式下推导了系统运动平衡方程,针对非保守载荷的等效计算、非线性切线刚度矩阵及非线性方程的数值求解等关键问题提出了有效处理方案.根据处理方案开发了数值计算程序,并...     

中性线修正型变截面梁类构件压电控制

传统绝对节点坐标法(absolute nodal coordinate formulation,ANCF)在变截面梁类构件建模过程中常以几何中位线等效构造单元中性线,难以对变截面单元位移场状态进行精确描述.为解决此类问题,本文以中细型变截面梁类构件为研究对象,深入考虑变截面结构几何因素及复合材料属性对变截面梁类构件中性...     

基于涡量矩理论的绕振荡水翼涡动力学分析

文章采用标准k-ω SST湍流模型和动网格技术, 实现了绕俯仰振荡NACA66水翼非定常流动结构与水动力特性的数值模拟, 并基于有限域涡量矩理论定量表征了局部旋涡结构对水翼动力特性的影响. 研究结果表明: 在水翼升程阶段, 当攻角较小时, 层流向湍流的转捩点由水翼尾缘向前缘移动; 在较大攻角时, 顺时针尾缘涡?TEV在水翼吸力面上生成并向前缘发展, 同时与吸力面上的顺时针前缘涡?LEV融合发展为附着在整个吸力面上的新前缘涡?LEV, 新的?LEV与逆时针尾缘涡+TEV相互作用直至完全脱落, 直接导致了水翼的动力失速, 在回程阶段, 绕振荡水翼的流场结构逐渐由湍流转变为层流. 基于有限域涡量矩理论的定量分析发现, 有限域内附着的?LEV和?TEV提供正升力, 当?LEV发展覆盖整个吸力面时对升力的贡献最大, 占总升力近50%, 而+TEV提供负升力. 同时发现, 有限域内各旋涡内部的不同区域提供的升力有正有负; 而逸出有限域的旋涡内部不同区域提供的升力方向均保持一致, 其中顺时针涡提供正升力, 而逆时针涡提供负升力. 在失速阶段, 域外旋涡整体对升力贡献较小且存在小幅波动, 体现了流动的非定常性.      

Method of reverberation ray matrix for static analysis of planar framed structures composed of anisotropic Timoshenko beam members

Based on the method of reverberation ray matrix(MRRM), a reverberation matrix for planar framed structures composed of anisotropic Timoshenko(T) beam members containing completely hinged joints is developed for static analysis of such structures.In the MRRM for dynamic analysis, amplitudes of arriving and departing waves for joints are chosen as unknown quantities. However, for the present case of static analysis, displacements and rotational angles at the ends of each beam member are directly considered as unknown quantities. The expressions for stiffness matrices for anisotropic beam members are developed. A corresponding reverberation matrix is derived analytically for exact and unified determination on the displacements and internal forces at both ends of each member and arbitrary cross sectional locations in the structure. Numerical examples are given and compared with the finite element method(FEM) results to validate the present model. The characteristic parameter analysis is performed to demonstrate accuracy of the present model with the T beam theory in contrast with errors in the usual model based on the Euler-Bernoulli(EB) beam theory. The resulting reverberation matrix can be used for exact calculation of anisotropic framed structures as well as for parameter analysis of geometrical and material properties of the framed structures.     

Vibration analysis of periodic cellular solids based on an effective couple-stress continuum model

Cellular solids are usually treated as homogeneous continuums with effective properties. Nevertheless, these mechanical properties depend strongly on the ratio of the specimen size to the cell size. These size effects may be accounted for according to preliminary static analysis of effective continuums based on couple-stress theory. In this paper an effective dynamic continuum model, based on couple-stress theory, is proposed to analyze the behavior of free vibrations of periodic cellular solids. In this continuum model, the effective mechanical constants of the effective continuum are deduced by an equivalent energy method. The cellular solid structure is then replaced with the equivalent couple-stress continuum with same overall dimension and shape. Moreover, the finite element formulation of the couple-stress continuum for the generalized eigenvalue analysis is developed to implement the free vibration analysis. The eigenfrequencies of the effective continuum are then obtained via the shear beam theory or the finite element method. A conventional finite element analysis by discretizing each cell of the cellular solids is also carried out to serve as an exact solution. Several structural cases are calculated to demonstrate the accuracy and effectiveness of the proposed continuum model. Good agreement on structural eigenfrequencies between the effective continuum solutions and the exact solutions shows that the proposed continuum model can accurately simulate the dynamic behavior of the cellular solids.     

采用压电机敏元件进行结构振动控制I：耦合系统动力分析

本文从机电耦合弹性体的理论出发，运用Ｈａｍｉｌｔｏｎ原理建立了一般压电耦合系统的动力分析模型，并给出了模态分析和有限元分析的耦合系统方程、作动方程及检测方程。该分析模型和计算公式可用于任意形状压电耦合系统的动力分析和振动控制设计。另外，导出的模态分析和有限元公式可用现有的商业软件求解。     

On the dynamics of tapping mode atomic force microscope probes

A?mathematical model is developed to investigate the grazing dynamics of tapping mode atomic force microscopes (AFM) subjected to a base harmonic excitation. A?multimode Galerkin approximation is utilized to discretize the nonlinear partial differential equation of motion governing the cantilever response and associated boundary conditions and obtain a set of nonlinearly coupled ordinary differential equations governing the time evolution of the system dynamics. A?comprehensive numerical analysis is performed for a wide range of the excitation amplitude and frequency. The tip oscillations are examined using nonlinear dynamic tools through several examples. The non-smoothness in the tip/sample interaction model is treated rigorously. A?higher-mode Galerkin analysis indicates that period doubling bifurcations and chaotic vibrations are possible in tapping mode microscopy for certain operating parameters. It is also found that a single-mode Galerkin approximation, which accurately predicts the tip nonlinear responses far from the sample, is not adequate for predicting all of the nonlinear phenomena exhibited by an AFM, such as grazing bifurcations, and leads to both quantitative and qualitative errors.     

Nonlinear transient dynamic response of damped plates using a higher order shear deformation theory

Damped transient dynamic elasto-plastic analysis of plate is investigated. A finite element model based on a C ⁰ higher order shear deformation theory has been developed. Nine noded Lagrangian elements with five degrees of freedom per node are used. Selective Gauss integration is used to evaluate energy terms so as to avoid shear locking and spurious mechanisms. Von Mises and Tresca yield criteria are incorporated along with associated flow rules. Explicit central difference time stepping scheme is employed to integrate temporal equations. The mass matrix is diagonalized by using the efficient proportional mass lumping scheme. A program is developed for damped transient dynamic finite element analysis of elasto-plastic plate. Several numerical examples are studied to unfold different facets of damping of elasto-plastic plates.     

From field vibration data to laboratory simulation

The objective of a test program is to simulate a specified dynamic environment. The question is: How do I go from field-test data to a reasonable laboratory or finite-element simulation? This paper looks at a simple situation of a two degree-of-freedom vehicle that has a broadband excitation source and a two degree-of-freedom test item that can be attached to the vehicle. The paper shows that significantly different field data are obtained depending on field-test conditions, and vastly different simulation results are obtained when using these different field data as laboratory inputs. A relatively simple theoretical model is developed that explains how field data in this case can be modified in the frequency domain to obtain a more realistic laboratory test environment. This presentation shows that a general theory of vibration testing is needed, a theory that provides guidelines for this process of obtaining field data and developing realistic test specifications.     

Analytical modeling of sandwich beam for piezoelectric bender elements

Piezoelectric bender elements are widely used as electromechanical sensors and actuators.An analytical sandwich beam model for piezoelectric bender elements was developed based on the first-order shear deformation theory(FSDT),which assumes a single rotation angle for the whole cross-section and a quadratic distribution function for coupled electric potential in piezoelectric layers,and corrects the effect of transverse shear strain on the electric displacement integration.Free vibration analysis of simply- supported bender elements was carried out and the numerical results showed that,solu- tions of the present model for various thickness-to-length ratios are compared well with the exact two-dimensional solutions,which presents an efficient and accurate model for analyzing dynamic electromechanical responses of bender elements.     

盘绕式空间可展折叠无铰伸展臂的屈曲分析理论研究

首先介绍了无铰可展空间伸展臂(Hingeless Mast)构造特点、展开折叠机理和受力特点,然后根据弹性稳定理论和能量原理,分别推导出局部卷压屈曲和整体螺旋屈曲的临界压力表达式,并据此进行参数特性分析。本文分析理论对无铰空间伸展臂的设计具有重要指导意义。     

VIBRATION ANALYSIS OF MICROSCALE PLATES BASED ON MODIFIED COUPLE STRESS THEORY

A non-classical Kirchhoff plate model is developed for the dynamic analysis of microscale plates based on the modified couple stress theory in which an internal material length scale parameter is included. Unlike the classical Kirchhoff plate model, the newly developed model can capture the size effect of microscale plates. Two boundary value problems of rectangular micro- plates are solved and the size effect on the lowest two natural frequencies is investigated. It is shown that the natural frequencies of the microscale plates predicted by the current model are size-dependent when the plate thickness is comparable to the material length scale parameter.