碟形薄壳的塑性屈曲

本文采用非线性前屈曲一致理论分析均布外压下碟形薄壳的塑性屈曲问题，建立了这类壳体的能量表达式和屈曲方程，给出了简明的计算格式。数值分析结果表明，所导出的算法具有较好的精度，计算过程也简单方便。     

SANDERS薄壳方程的自共轭性

本文对Sanders薄壳方程的自共轭性作了讨论.证明了以下三点: 1.通常的齐次边界条件是简单自共轭边界条件; 2.在简单自共轭边界条件下,Sanders薄壳方程是自共轭的、其蜕化(元矩)方程也是自共轭的; 3.任何薄壳理论,其满足功的互等定理与具有自共轭性所需条件是相同的: 作为6个变形分量的正定二次型的应变能函数存在. 由于Sanders薄壳理论在任意曲线坐标系中成立,故以上结论亦适用于任意曲线坐标系. 本文的讨论为采用Sanders理论对薄壳进行动力分析提供了理论准备.     

PLASTIC BUCKLING OF STIFFENED TORISPHERICAL SHELL

ＰＬＡＳＴＩＣＢＵＣＫＬＩＮＧＯＦＳＴＩＦＦＥＮＥＤＴＯＲＩＳＰＨＥＲＩＣＡＬＳＨＥＬＬＨａｏＧａｎｇ（郝刚）ＺｅｎｇＧｕａｎｇｗｕ（曾广武）ＨａｏＱｉａｎｇ（郝强）（ＲｅｃｅｉｖｅｄＤｅｃ．３０，１９９４．ＣｏｍｍｕｎｉｃａｔｅｄｂｙＰａｎＬｉｚｈ...     

圆柱壳大开孔的薄壳理论解

采用修正的Ｍｏｒｌｙ方程，以ρ０，Ｙ／Ｒ为小参数，对圆柱壳大开孔的边界条件进行渐近展开，得到了可适用于ρ０≤０．７，情况下的薄壳理论解。     

圆柱壳稳定性问题的研究进展

圆柱壳是工程实际中广泛应用的结构,其主要破坏形式是屈曲失稳．作为力学领域的经典问题,圆柱壳稳定性问题的研究非常之多．其中,受均匀轴向压力的圆柱壳由于临界屈曲载荷的理论预测值与早期试验结果之间的巨大差异,更是推动了壳体稳定性理论的不断发展．本文简要回顾了壳体稳定性理论的发展和分类,并对轴压圆柱壳体试验结果分散且远低于理论预测值的原因及含缺陷圆柱壳体的稳定性研究方法进行了总结,然后综述了地下空间顶管、储油罐、加筋圆柱壳及脱层圆柱壳等实际工程中广泛应用的圆柱壳结构稳定性研究的现状和趋势,最后展望了将来对工程应用中圆柱壳结构的稳定性研究的难点和方向．     

壳体对爆炸空气冲击波强度的影响

壳体对爆炸空气冲击波强度有重要影响，本文提出一种计算壳体破片速度的新方法，分析了壳体对爆炸空气冲击波强度的影响。本文指出，壳体对爆炸空气冲击波强度的影响取决于产生壳体破片部位的壁厚(质量)，而不是壳体的全部质量。这反映了实际情况，也是本文的特点所在。通过重量和形状相同的两种装药爆炸空气冲击波对模拟目标的毁伤实验，考查了本文理论分析结果的可靠性。理论分析与实验结果相吻合。本文得到弹体破片最大速度的上限和下限。破片速度与壳体厚度有关，壳体越厚或质量越大．对空气冲击波强度的影响越显著。     

Some dynamical properties of a viscoelastic cylindrical shell

IntroductionTherearerarepapersonthedynamicPropertiesofviscoelasticshells.~ulosl']discussesthecaseofshallowsphericalshellandDrozdov[ZIgivesasufficientcondihonofstabilityfortheviscoelasticcylindershellbyusingtheLyapunovfunchonal.UsingtheLyapunovdirectmethod,Tyllkowski[']establishesasufficientconditionfortheasymptohcstabilityofviscoelasticcylindricalshell.ItisnotdifficulttofindthattheseexistingresultSmainlyconcentrateonthedynamicstabilityofviscoelasticshell.Thediscussionaboutthedynamicalsyste…     

复合结构壳体蠕变变形有限元研究

基于蠕变理论，采用有限元数值计算方法，用ANSYS作为计算平台，建立了壳体结构的蠕变变形计算模型．对由耐火材料是镁碳砖炉衬和炉壳组成的复合结构转炉，由于高导热率的镁碳砖广泛使用，引起转炉炉壳的温度升高，导致转炉不同程度地出现了炉壳蠕变变形，致使炉壳使用寿命缩短．研究转炉炉壳蠕变变形的状态及分布规律，可为控制炉壳蠕变变形、延长炉壳使用寿命提供依据．运用所述的有限元计算模型，对复合结构的转炉炉壳的蠕变变形行为进行模拟，模拟结果与现场测量值基本吻合．     

On `best' shell models – From classical shells, degenerated and multi-layered concepts to 3D

Summary Problems of solid mechanics are most generally formulated within 3D continuum mechanics. However, engineering models favor reduced dimensions, in order to portray mechanical properties by surface or curvilinear approximations. Such attempts for dimensional reduction constitute interactions between theoretical formulations and numerical techniques. A classical reduced model for thin bodies is represented by shell theory, an approximation in terms of resultants and first-order moments. If the shell theory, with its inherent errors, is considered as qualitatively insufficient for a particular problem, a further improvement is given by solid shell models, which are gained by direct linear interpolation of the 3D kinematic relations. They improve considerably the analytic capabilities for shells, especially when their congenital locking effects are handled by variational `convergence tricks'. The next step towards 3D quality are layered shells or solid shell elements. The present paper compares these three approximation stages from the point of view of multi-director (integral) transformations of classical continuum mechanics. It offers physical convergence requirements for each of the treated models. Partial support to the present study by the German Science Foundation (DFG) within the Special Research Center (SFB) 398 is gratefully acknowledged.     

薄壁柱壳的圆度及三维变形测量技术

本文采用一种新的形状位置（Ｐｒｏｆｉｌｉｍｅｔｒｙ）自动测量计算机处理方法,对钢质圆柱壳的椭圆度进行了测试。具体使用投影光栅,于壳体表现形成栅线影象,自动形成栅线光频率线性编码,用ＣＣＤ摄象机采集到频率编码壳体光栅影象,构成形西半球工波图。将载波的图象经过计算机图象系统获得数值图象。计算机经过快速富立叶变换法解码,输出频率位相值,经数据处理可得到精确的壳面尺度。     

Post-buckling behavior of a point-supported cylindrical liner shell of concrete pressure vessels

Using W. T. Koiter's initial post-buckling theory, this paper deals with the critical load and post-buckling behavior of a point-supported cylindrical liner shell encased in a concrete pressure vessel while the liner shell is subjected to axial and lateral compressions. The reasonable spacing of anchors is given. The results show that the point-supported cylindrical liner shell has a relatively complicated post-buckling behavior. The behavior is subject to the change of anchor spacing in both axial and circumferential directions. When the ratio of the anchor spacing in the two directions satisfies a certain condition, the liner shell will carry the maximum load.     

THE ANALYSIS OF SHALLOW SHELLS BASED ON MULTIVARIABLE WAVELET FINITE ELEMENT METHOD

Based on the generalized variational principle and B-spline wavelet on the interval (BSWI), the multivariable BSWI elements with two kinds of variables (TBSWI) for hyperboloidal shell and open cylindrical shell are constructed in this paper. Different from the traditional method, the present one treats the generalized displacement and stress as independent variables. So differentiation and integration are avoided in calculating generalized stress and thus the precision is improved. Furthermore, compared with commonly used Daubechies wavelet, BSWI has explicit expression and excellent approximation property and thus further guarantee satisfactory results. Finally, the effciency of the constructed multivariable shell elements is validated through several numerical examples.     

The distributions of the interlaminar stress in a laminated shell with free end boundary

This paper studies the free edge effect yielded by interlaminar stress in a laminated cylindrical shell made up of fiber reinforced layer [0°], [90°] and the isotropic material layer under axisymmetric thermal load or radial pressure. Both ends of the shell are in free boundary condition. The exact solution of the problem can be obtained by using the three-dimensional theory of elasticity. For illustration, the numerical laminar stresses in a double-layer laminated shell under thermal load or radial pressure are calculated.     

用泰勒级数法求解横观各向同性球壳的轴对称弯曲问题

本文采用泰勒级数法分析横观各向同性球壳轴对称弯曲问题。将位移沿厚度方向展开成泰勒级数,利用三维弹性方程求得级数中的各阶导数。对于边值问题,用特征函数法满足球面齐次边界条件,并用最小二乘配点法满足端部条件。     

DYNAMIC CHARACTERISTICS OF AXIALLY-SYMMETRICAL ANNULAR CORRUGATED SHELL PIEZOELECTRIC TRANSDUCERS

The coupled extensional and flexural vibrations of an annular corrugated shell piezoelectric transducer consisting of multiple circularly-annular surfaces smoothly connected along the interfaces were investigated in the paper. Only a time-harmonic voltage is applied across two electrodes of the piezoelectric shell as the external loading. A theoretical solution was obtained using the classical shell theory. Based on the solution, basic vibration characteristics of resonant frequencies, mode shapes were calculated and examined.     

The displacement solution of conical shell and its application

In this paper,the displacement solution method of the conical shell is presented.Fromthe differential equations in displacement form of conical shell and by introducing adisplacement function,U(s,θ),the differential equations are changed into an eight-ordersoluble partial differential equation about the displacement function U(s,θ)in which thecoefficients are variable.At the same time,the expressions of the displacement and internalforce components of the shell are also given by the displacement function.As special casesof this paper,the displacement function introduced by V.Z.Vlasov in circular cylindricalshell,the basic equation of the cylindrical shell and that of the circular plate are directlyderived.Under the arbitrary loads and boundary conditions,the general bending problem of theconical shell is reduced to finding the displacement function U(s,θ),and the generalsolution of the governing equation is obtained in generalized hypergeometric function,Forthe axisymmetric bending deformation of the     

矩形扁壳弯曲问题的一般解

本文建立了四边挠度为零的矩形扁壳弹性弯曲问题的一般解析解.以四边位移为零的固支矩形扁壳为例求解了对称变形问题。     

壳体结构优化及其DDDU(W)新版本

本文建立了壳体结构优化的序列二次规划模型,对八节点等参壳单元做了优化处理,扩充了通用结构优化程序DDDU(W)的功能。文末算例表明了算法的合理性与有效性。     

一种提高四边形四节点平面壳单元计算精度的新方法

平面壳单元是由平面应力单元和平板弯曲单元叠加组合而成,具有简单的理论表达,但是它在计算曲面壳体结构时误差较大。为了进一步提高平面壳单元的计算精度,本文提出了一种计算平面壳单元刚度矩阵的新方法。通过该方法在高斯积分点建立多个单元局部坐标系,并保证每个局部坐标系都位于单元在高斯点处的切平面上,从而可以有效适应曲面壳体形状,达到进一步提高平面壳单元计算精度的目的。为了在这种新坐标系下计算单元刚度矩阵,给出了求解形函数对局部坐标的导数、局部到自然坐标系积分转换的雅可比、以及局部到整体坐标系的转换矩阵的新型计算方法。通过将这些新坐标系以及新计算方法运用到平面壳单元DKQ24中,可以有效提高平面壳单元尤其是在计算曲面壳体时的精度。计算结果表明,本文方法和平面壳单元相结合,不仅具有平面壳单元简单的理论表达式,还能得到满意的精度。另外,本文方法还可以应用到其他类型的平面壳单元,为提高其他类型平面壳单元的计算精度提供了一种新的途径和思路,具有广阔的应用前景。