考虑几何与压电非线性行为压电层合轴对称圆板的精确解

研究可移简支及夹支边界条件下,轴对称压电层合圆板在强电场和机械荷载联合作用下的非线性变形.考虑电致伸缩的非线性压电效应及几何非线性的影响,导出轴对称压电层合圆板的控制方程.通过调整坐标轴的位置对控制方程进行简化,得到关于挠度和径向力的4阶非线性控制方程.再通过简单的积分并引入无量刚变量将控制方程等价地化为2阶非线性耦合微分方程组.利用幂级数法得到可移简支及夹支边界条件下强电场和均布荷载共同作用时的挠度、径向力及径向位移的幂级数精确解.通过对双、单压电晶片执行器的数值计算及分析,得到电场、外载对于位移、径向力的影响关系.     

具损伤压电智能层合中厚板的非线性动力稳定性分析

基于各向异性损伤理论和压电理论，采用能量法和Lagrange方程，建立了具损伤压电智能层合中厚板在参数激励下的非线性运动控制方程，应用增量谐波平衡法，求解了具损伤压电智能层合中厚板的非线性动力稳定性问题。算例中，分析了损伤参数和压电效应对压电智能层合板非线性动力稳定性的影响，揭示了力电耦合效应的内在特征，并与有关文献的结果进行了比较。     

非线性压电效应下压电层合板的弯曲

考虑非线性压电效应,即电致弹性和电致伸缩效应情况下压电层合板的弯曲。从非线性压电方程和几何方程导出了压电层合板合应力、合力矩与应变之间的广义本构关系,这些关系关于电场是非线性的。利用Ritz法和双傅立叶级数得到四边简支对称压电层合板在高电场作用下的非线性解并进行计算。结果表明,只考虑线性压电效应只能适应于作用电场较低或基础层的刚度比压电层的刚度要大得多的情况。     

固体电介质中的挠曲电效应

挠曲电效应通常描述为非均匀变形如应变梯度引起的电极化或者电场梯度引起的变形。由于应变梯度能够局部破坏晶体的反演对称从而在材料中诱导电极化,因此挠曲电效应是固体电介质材料中普遍存在的一种力电耦合效应。由于应变梯度和电场梯度均随材料尺寸的减小而迅速增大,在宏观尺度通常被忽略的挠曲电效应在微纳尺度反而起着非常重要的作用,会显著影响材料的物理性能。与压电效应和电致伸缩效应相比,挠曲电效应具有独特的尺寸依赖特征,其不受材料对称性和铁电材料居里相变温度的限制。本文综述了固体电介质中的挠曲电效应,并重点从理论、材料和应用方面综述了固体电介质中挠曲电效应的研究进展,对挠曲电效应的独特性能进行了详细地讨论,最后本文展望了固体电介质中挠曲电效应相关研究的开放性问题和发展方向。     

One-dimensional dynamic equations of a piezoelectric semiconductor beam with a rectangular cross section and their application in static and dynamic characteristic analysis

Within the framework of continuum mechanics, the double power series expansion technique is proposed, and a series of reduced one-dimensional (1D) equations for a piezoelectric semiconductor beam are obtained. These derived equations are universal, in which extension, flexure, and shear deformations are all included, and can be degenerated to a number of special cases, e.g., extensional motion, coupled extensional and flexural motion with shear deformations, and elementary flexural motion without shear deformations. As a typical application, the extensional motion of a ZnO beam is analyzed sequentially. It is revealed that semi-conduction has a great effect on the performance of the piezoelectric semiconductor beam, including static deformations and dynamic behaviors. A larger initial carrier density will evidently lead to a lower resonant frequency and a smaller displacement response, which is a little similar to the dissipative effect. Both the derived approximate equations and the corresponding qualitative analysis are general and widely applicable, which can clearly interpret the inner physical mechanism of the semiconductor in the piezoelectrics and provide theoretical guidance for further experimental design.     

Electroelastic analysis of a cracked piezoelectric ceramic strip sandwiched between two elastic dielectrics

The electroelastic analysis of a cracked piezoelectric composite is made. The piezoelectric composite consists of a piezoelectric ceramic strip sandwiched by two outer elastic dielectrics, and a crack is assumed to be located at the center of the piezoelectric strip and normal to the interfaces. By using an integral transform technique, the problem is reduced to singular integral equations with Cauchy kernel. Numerical solutions are determined via the Lobatto–Chebyshev collocation method. The field intensity factors for a realistic crack are obtained, and the solution of a realistic crack lies between those of an impermeable crack and a permeable crack. The results indicate that electric loading has an apparent influence on crack growth. This effect disappears when crack becomes permeable to electric field. Moreover, stiffer outer dielectrics can hinder crack growth.     

Interaction between bending and mobile charges in a piezoelectric semiconductor bimorph

We study the bending of a two-layer piezoelectric semiconductor plate (bimorph). The macroscopic theory of piezoelectric semiconductors is employed. A set of two-dimensional plate equations is derived from the three-dimensional equations. The plate equations exhibit direct couplings among bending, electric polarization along the plate thickness, and mobile charges. In the case of pure bending, a combination of physical and geometric parameters is identified which characterizes the strength of the interaction between the mechanical load and the distribution of mobile charges. In the bending of a rectangular plate under a distributed transverse mechanical load, it is shown that mobile charge distributions and potential barriers/wells develop in the plate. When the mechanical load is local and self-balanced, the induced carrier distributions and potential barriers/wells are also localized near the loading area. The results are fundamentally useful for mechanically manipulating mobile charges in piezoelectric semiconductor devices.     

基于压电曲壳单元的结构振动最优控制

曲壳结构已广泛应用于航空航天、航海等领域,结构微小的振动会极大地影响部件性能,抑制曲壳结构的振动就很必要。提出了压电曲壳结构的振动最优控制模型,利用空间曲壳单元理论及多点约束方程实现曲壳基结构壳元和压电壳元的耦合,推导了压电曲壳结构动力学有限元方程,并结合线性二次型最优控制理论,实现了压电作动器对曲壳结构的振动最优控制。数值算例表明,对曲壳结构进行动力分析和振动控制时,在达到同样精度及控制效果的情况下,与平壳相比,曲壳单元及作动器所需数目要少得多。     

An antisymmetric problem of a penny-shaped crack in a piezoelectric medium

Summary  An exact, three-dimensional analysis is developed for a penny-shaped crack in an infinite transversely isotropic piezoelectric medium. The crack is assumed to be parallel to the plane of isotropy, with its faces subjected to a couple of concentrated normal forces and a couple of point electric charges that are antisymmetric with respect to the crack plane. The fundamental solution of a concentrated force and a point charge acting on the surface of a piezoelectric half-space is employed to derive the integral equations for the general boundary value problem. For the above antisymmetric crack problem, complete expressions for the elastoelectric field are obtained. A numerical calculation is finally performed to show the piezoelectric effect in piezoelectric materials. It is noted here that the present analysis is an extension of Fabrikant's theory for elasticity. Received 30 August 1999; accepted for publication 1 March 2000     

Double-Continuum Mechanics of Dielectric Materials as the Basis of Electromagnetomechanics

A new concept is proposed for constructing the theory of coupled mechanical and electrodynamic processes in deformable media. It is based on the double-continuum mechanics of dielectric materials. The phenomenological and discrete-structural methods for deriving the equations of the theory are considered. These equations reduce to a system of connected equations for the displacements of neutral molecules and electric field intensity, satisfy the Galilean relativity principle, and describe longitudinal electric and transverse electromagnetic dispersive waves. Maxwell's equations follow from those equations as a particular case. The ether is modeled as a perfectly liquid dielectric. The theory is capable of explaining Fizeau's and Michelson's experiments and stellar aberration without invoking Einstein's postulates     

旋转功能梯度智能结构的刚-柔耦合动力学分析

基于一次耦合模型理论建立了中心刚体-压电层-功能梯度材料智能梁系统的刚柔耦合动力学模型．研究了开环状态下将压电材料作为传感器的压电效应和质量刚度效应对系统动力学特性的影响．通过仿真算例与另两种不同建模理论（传统零次近似耦合模型、一次近似耦合模型）作了对比．随着中心刚体外驱动力矩的增大,零次近似耦合模型和一次近似耦合模型计算结果逐渐发散,而本文的一次耦合模型的计算结果始终保持收敛,较其他近似耦合模型具有一定优势．对三种不同的结构的计算结果表明,压电材料的压电效应对系统的动力学特性影响显著,压电材料的质量刚度效应也会影响智能梁的动力学行为,前者比后者的影响大得多．此外,功能梯度材料功能梯度指数对系统动力学特性的影响也较大．     

Spherical-symmetric steady-state response of piezoelectric spherical shell under external excitation

ＩｎｔｒｏｄｕｃｔｉｏｎＷｉｔｈｔｈｅｒａｐｉｄｄｅｖｅｌｏｐｍｅｎｔｏｆｔｈｅｓｃｉｅｎｃｅａｎｄｔｅｃｈｎｏｌｏｇｙ ,ｍｏｒｅａｎｄｍｏｒｅｃｏｍｐｌｅｘｍｅｃｈａｎｉｓｍａｎｄｓｔｒｕｃｔｕｒｅｓａｒｅｐｕｔｉｎｔｏｕｓｅ,ｓｕｃｈａｓｆｌｅｘｉｂｌｅｒｏｂｏｔ,ｆｌｅｘｉｂｌｅａｒｍ ,ａｉｒｃｒａｆｔａｎｄｓｐａｃｅｓｔａｔｉｏｎ .Ｒｅｓｅａｒｃｈｅｒｓｐａｙｍｏｒｅａｔｔｅｎｔｉｏｎｔｏｔｈｅｐｒｏｂｌｅｍｏｆｅｆｆｅｃｔｉｖｅｄｙｎａｍｉｃｄｅｔｅｃｔｉｏｎａｎｄｃｏｎｔｒｏｌｏｆｓｕ…     

含币形裂纹的压电体在点力和点电荷作用下的裂纹张开位移

本文利用Chen和Shioya给出的在横观各向同性压电无限体内币形裂纹上下表面作用对称法向点力和点电荷情形下的解,结合压电材料之功的互等定,用初等函数的形式给出了在压电无限体中任意一点作用任意点力和点电荷情形下币形裂纹的张开位移,并对PZT－4压电陶瓷和非压电材料作了计算分析。     

Multi-field Response of Anisotropic Magneto-Electro-Elastic Materials at a Rigid Conducting Cylinder

Contact problem of anisotropic magneto-electro-elastic materials indented by a perfectly conducting cylindrical punch is investigated based on a complete coupling theory. The 12 cases of the distinctive eigenvalue distribution of the related governing equations are detailed. For 3 available eigenvalue distribution cases involving semi-infinite anisotropic magneto-electro-elastic materials, real fundamental solutions are provided. A system of singular integral equations is obtained and solved exactly. The explicit expressions for the coupled magneto-electro-elastic fields in the half-plane are presented in the form of elementary functions. Figures are plotted to show the effects of various parameters, such as the volume fraction of the piezoelectric phase, on the contact behaviors. In-depth analyses are given to explain how the various parameters cause the contact properties to change and develop. Connections between the present study and practical application are presented. This article may greatly benefit the experimental and numerical test involving magneto-electro-elastic materials.     

Saint-Venant end effects for plane deformations of linear piezoelectric solids

The recent developments in smart structures technology have stimulated renewed interest in the fundamental theory and applications of linear piezoelectricity. In this paper, we investigate the decay of Saint-Venant end effects for plane deformations of a piezoelectric semi-infinite strip. First of all, we develop the theory of plane deformations for a general anisotropic linear piezoelectric solid. Just as in the mechanical case, not all linear homogeneous anisotropic piezoelectric cylindrical solids will sustain a non-trivial state of plane deformation. The governing system of four second-order partial differential equations for the two in-plane displacements and electric potential are overdetermined in general. Sufficient conditions on the elastic and piezoelectric constants are established that do allow for a state of plane deformation. The resulting traction boundary-value problem with prescribed surface charge is an oblique derivative boundary-value problem for a coupled elliptic system of three second-order partial differential equations. The special case of a piezoelectric material transversely isotropic about the poling axis is then considered. Thus the results are valid for the hexagonal crystal class 6mm. The geometry is then specialized to be a two-dimensional semi-infinite strip and the poling axis is the axis transverse to the longitudinal direction. We consider such a strip with sides traction-free, subject to zero surface charge and self-equilibrated conditions at the end and with tractions and surface charge assumed to decay to zero as the axial variable tends to infinity. A formulation of the problem in terms of an Airy-type stress function and an induction function is adopted. The governing partial differential equations are a coupled system of a fourth and third-order equation for these two functions. On seeking solutions that exponentially decay in the axial direction one obtains an eigenvalue problem for a coupled system of fourth and second-order ordinary differential equations. This problem is the piezoelectric analog of the well-known eigenvalue problem arising in the case of an anisotropic elastic strip. It is shown that the problem can be uncoupled to an eigenvalue problem for a single sixth-order ordinary differential equation with complex eigenvalues characterized as roots of transcendental equations governing symmetric and anti-symmetric deformations and electric fields. Assuming completeness of the eigenfunctions, the rate of decay of end effects is then given by the real part of the eigenvalue with smallest positive real part. Numerical results are given for PZT-5H, PZT-5, PZT-4 and Ceramic-B. It is shown that end effects for plane deformations of these piezoceramics penetrate further into the strip than their counterparts for purely elastic isotropic materials.     

Measurement of electrical charges carried by airborne bacteria laboratory-generated using a single-pass bubbling aerosolizer

Widely used bioaerosol generators like Collison nebulizer probably produce electrostatically charged particles, but the electrical charges carried by laboratory-generated airborne microorganisms using bubbling aerosolizers are poorly understood. In this study, we measured the fraction of neutral particles and number of elementary charges per particle as a function of the aerodynamic diameter of airborne bacteria (Escherichia coli and Enterococcus hirae). Bioaerosols were produced by a liquid sparging aerosolizer-type bubbling generator, with particle sizes ranging from roughly 0.6 to 2 μm. The experimental setup included an electrostatic precipitator and real-time devices including an electrometer, aerodynamic particle sizer, and electrical low-pressure impactor. Experimental results obtained for various operating conditions showed that aerosols produced with a higher bubbling airflow contained a larger proportion of neutral particles (from around 30% to 50%) and that bacteria carried a greater average absolute number of elementary charges (from around –10 to –60 elementary units) than those under lower airflow. Under the investigated conditions, a neutralization step is unnecessary because it may have a negative effect on the viability of sensitive microorganisms. Our results suggest that the neutral fraction can be used downstream of an electrostatic precipitator, and that this setup may have advantages over bipolar neutralizers.     

Derivation of Plate and Rod Equations for a Piezoelectric Body from a Mixed Three-Dimensional Variational Principle

We use a mixed 3-dimensional variational principle to derive 2-dimensional equations for an anisotropic plate-like piezoelectric body and one-dimensional equations for an anisotropic beam-like piezoelectric body. The formulation accounts for double forces without moments which may change the thickness of the plate and deform the cross-section of the rod. The dependence of the bending rigidities of a transversely isotropic plate upon the angle between the normal to the midsurface and the direction of transverse isotropy is exhibited. The plate equations are used to study the cylindrical deformations of a transversely isotropic plate due to equal and opposite charges applied to its top and bottom surfaces. It is also found that a piezoelectric circular rod with axis of transverse isotropy not coincident with its centroidal axis and subjected to electric charges at the end faces is deformed into a non-prismatic body.     

A theoretical analysis of smart moderately thick shear deformable annular functionally graded plate

Based on Mindlin's plate theory, free vibration analysis of moderately thick shear deformable annular functionally graded plate coupled with piezoelectric layers is presented in this paper. A consistent formulation that satisfies the Maxwell static electricity equation is presented so that the full coupling effect of the piezoelectric layer on the dynamic characteristics of the annular FGM plate can be estimated based on the free vibration results. The differential equations of motion are solved analytically for various boundary conditions of the plate through the transformation of variable method. The applicability of the proposed model is analyzed by studying the effect of varying the gradient index of FGM plate on the free vibration characteristics of the structure. For some specific cases, obtained results were cross checked with those existing literatures and furthermore, verified by those obtained from three-dimensional finite element (3D FE) analyses.     

WAVE PROPAGATION IN ELECTROSTRICTIVE MATERIALS UNDER BIASED FIELDS

I. INTRODUCTION Di?erent from piezoelectricity which is a linear coupling between mechanical and electric ?elds andcan only exist in anisotropic materials[1], electrostriction refers to the quadratic dependence of strainor stress on electric ?elds[2,3] …