The acoustical influence of balcony depth and parapet form: experiments and simulations

The influence of balcony depth and parapet form on the acoustical performance of building facades close to roadways have been investigated. Various depths and two inclinations of parapet have been modeled on an eight floor building. Pyramid ray-tracing simulations and scale model measurements have been carried out. The predicted and measured A-weighted sound pressure level reductions over the balcony back wall and in free field conditions have been compared. The results have been used to derive empirical equations for predicting protection as a function of geometrical parameters. The protection obtained by various parapet depths ranges between 4 and 8 dB(A), while an additional protection of between 0.5 and 4 dB(A) can be obtained by inclining the parapets.     

A simple formula for evaluating the acoustic effect of balconies in protecting dwellings against road traffic noise

This study explores the noise reducing effect of a balcony and describes the development of a simple theory pertaining to the propagation of traffic noise from a road into a balcony. A new methodology is proposed that is based on the well-known prediction scheme—“Calculation of Road Traffic Noise” (CRTN)—developed in the UK. A geometrical ray theory is developed for the prediction of noise levels inside a balcony due to road traffic. The source level of road traffic noise is obtained as per the standard CRTN methodology. However, road sub-segmentations and new approaches for the prediction of noise levels at illuminated and shadow zones inside a balcony are proposed. Field measurements have been conducted on four different types of balcony to validate the proposed methodology. The insertion loss, defined as the difference in the noise levels with and without the presence of a balcony, has been used to assess the shielding effectiveness of a balcony against road traffic noise. The simple theory is validated by outdoor field measurements. It is also found that a properly designed balcony can provide considerable screening effects in protecting dwellings against road traffic noise.     

The acoustic performance of building façades in hot climates: Part 2—Closed balconies

The acoustic protection afforded by a balcony open to the street but enclosed on all other sides was investigated by means of one-tenth scale models. The results indicate that the protection is slight and the frequency invariant when the receiver is exposed to a direct path. The protection increases with increased sound incident angle and balcony depth and becomes frequency dependent when the direct path between source and receiver is screened.In general, the protection measured by the author, using scale models, compared well with the full-scale measurements of other workers. The measured protection of a balcony is considerably improved when perforated screens of unusual geometry are installed.A maximum protection due to these screens is obtained at first and second floor levels and at balcony depths of 2 m and less.     

Traffic noise reduction at balconies on a high-rise building façade

The performance of balconies with ceiling-mounted reflectors on a high-rise building fac?ade is examined using numerical analyses and scale-model experiments. The reflectors are designed to reflect direct and diffracted waves incident on the ceiling outside the balcony. The sound pressure reduction, provided by the reflectors, on a window surface adjacent to the balcony is evaluated at intermediate floors levels. In terms of A-weighted sound pressure levels, a balcony equipped with reflectors reduces road traffic noise by 7-10 dB(A), compared to an ordinary balcony, at incident angles of noise close to the angle for which the reflectors are designed. The efficiency is roughly the same as, or greater than, that of a balcony with an absorbent ceiling. However, it is also shown that when the vertical incident angle of the noise is smaller than the design angle of the reflectors, or the horizontal incident angle is large, efficiency is reduced.     

Scale model study of balcony insertion losses on a building façade with non-parallel line sources

The screening effect of balconies on a building façade in the case where the noise source is not parallel to the façade is studied using scale model experiment in the present study. Results show that the angle of source inclination to the façade has substantial effects on the balcony insertion loss in the presence of a traffic noise spectrum. Less amount of noise amplification is observed when the source is inclined compared to the case of parallel source in the presence of balcony ceiling reflections. Regression formulae in terms of three independent angles which determine the positions of the balcony and its ceiling relative to the noise source are developed for the prediction of balcony insertion loss. The discrepancy between measurements and predictions is within engineering tolerance.     

Simulating the effect of acoustic treatment types for residential balconies with road traffic noise

Development of design guides to estimate the difference in speech interference level due to road traffic noise between a reference position and balcony position or façade position is explored. A previously established and validated theoretical model incorporating direct, specular and diffuse reflection paths is used to create a database of results across a large number of scenarios. Nine balcony types with variable acoustic treatments are assessed to provide acoustic design guidance on optimised selection of balcony acoustic treatments based on location and street type. In total, the results database contains 9720 scenarios on which multivariate linear regression is conducted in order to derive an appropriate design guide equation. The best fit regression derived is a multivariable linear equation including modified exponential equations on each of nine deciding variables, (1) diffraction path difference, (2) ratio of total specular energy to direct energy, (3) distance loss between reference position and receiver position, (4) distance from source to balcony façade, (5) height of balcony floor above street, (6) balcony depth, (7) height of opposite buildings, (8) diffusion coefficient of buildings and (9) balcony average absorption. Overall, the regression correlation coefficient, R², is 0.89 with 95% confidence standard error of ±3.4 dB.     

Noise screening effects of balconies on a building facade

The insertion loss and its spectrum due to a rectangular balcony on a building facade in the presence of sound reflection and scattering from adjacent balconies were examined using a scale model. The front panel of the balcony dictates the screening performance, while the side walls of the balcony are found to be insignificant. Balconies without a front panel do not provide acoustic protection in the presence of upper balcony reflection, especially for a distant noise source. Sound amplifications are also observed in many cases. In addition, the shapes of the insertion loss spectra are found to depend on the elevation angle of the balcony. Significant correlations between the A-weighted balcony insertion losses with this angle are found in the absence of upper balcony reflections. With such reflection, an angle defined using the balcony configuration and source position correlates within engineering tolerance to the insertion losses.     

Influence of expanding ring roads on traffic noise in Beijing City

The road network in Beijing is expanding in the form of loop-lines. Following the 2nd and 3rd ring roads, the 4th has been completed and come into operation in 2002. Traffic noise surveying and analysis was performed along four main roads in the Beijing urban area—the 2nd, 3rd and 4th ring roads circling the central downtown area and Chang-An Avenue, a major east-west corridor through the heart of the city. Measured noise data along the 2nd, 3rd and Chang-An Avenue were compared with the data surveyed before the completion of the 4th ring road for determining influence of expanding ring roads on traffic noise pattern in Beijing City. The results indicate that these main roads remain overloaded by traffic flow during daytime, and noise levels due to road traffic along these roads exceeds relavent environmental standards by 5 dBA. Reduced traffic noise level was observed along the northern half of the 2nd and 3rd ring roads, and along the central section of Chang-An Avenue. Increased traffic noise level was observed along the southern half of the 2nd and 3rd ring roads, and along the non-central section of Chang-An Avenue. Expanding ring roads mitigate heavy traffic flow in the central part of Beijing City, but spread high traffic noise outwards at the same time.     

Design and experimental tests of active control barriers for low-frequency stationary noise reduction in urban outdoor environment

Active noise control (ANC) techniques are based on the emission of an antiphase signal in order to cancel the noise produced by a primary source. ANC has been successfully applied especially for reducing noise in confined environments, such as headphones and ducts. In this study, we present an application of ANC concepts to the design of an anti-noise barrier for an outdoor environment and its experimental testing. Even though passive techniques are effective in noise reduction at middle-high frequencies, they become less efficient at low frequencies (below 300 Hz) due to the limited dimensions of commonly deployable barriers. In this paper, we analyze the properties of a low-cost active noise system able to efficiently operate on stationary, almost pure-tone, low-frequency noise, such as that produced by electrical transformers and reactors in power and transformation plants. A prototype has been implemented and on-the-field experimental tests have been carried out. The results (confirmed also by numerical simulations) demonstrate a remarkable efficiency in the far field, with a reduction up to 15 dB with respect to the absence of the ANC system.     

Estimating traffic noise for inclined roads with freely flowing traffic

Traffic noise measurements on the kerbs of 19 independent inclined trunk roads with freely flowing traffic within the residential areas of Hong Kong are carried out in the present investigation. The performance of the existing noise prediction models in predicting traffic noise from inclined roads is evaluated. By regression analysis and simple physical consideration of the traffic noise production mechanisms, formulae for the prediction of the L_A10, L_A50, L_A90 and L_Aeq are developed or re-calibrated. Results suggest tyre noise has the major contribution to the overall noise environment when the source is an inclined trunk road. Also, the road gradient is found to have a higher contribution to the traffic noise than assumed in the existing models, but becomes unimportant when the background noise level L_A90 is concerned.     

Interactive simulation of aircraft noise in aural and visual virtual environments

This paper describes a novel aircraft noise simulation technique developed at RWTH Aachen University, which makes use of aircraft noise auralization and 3D visualization to make aircraft noise both heard and seen in immersive Virtual Reality (VR) environments. This technique is intended to be used to increase the residents’ acceptance of aircraft noise by presenting noise changes in a more directly relatable form, and also aid in understanding what contributes to the residents’ subjective annoyance via psychoacoustic surveys. This paper describes the technique as well as some of its initial applications. The reasoning behind the development of such a technique is that the issue of aircraft noise experienced by residents in airport vicinities is one of subjective annoyance. Any efforts at noise abatement have been conventionally presented to residents in terms of noise level reductions in conventional metrics such as A-weighted level or equivalent sound level L_eq. This conventional approach however proves insufficient in increasing aircraft noise acceptance due to two main reasons – firstly, the residents have only a rudimentary understanding of changes in decibel and secondly, the conventional metrics do not fully capture what the residents actually find annoying i.e. characteristics of aircraft noise they find least acceptable. In order to allow least resistance to air-traffic expansion, the acceptance of aircraft noise has to be increased, for which such a new approach to noise assessment is required.     

Noise impact assessment by utilizing noise map and GIS: A case study in the city of Chungju, Republic of Korea

In this study, a scheme to develop a noise map and noise impact assessment method using GIS has been suggested. After developing a road-traffic noise map for the city of Chungju, Republic of Korea, noise impact assessment was performed through analyzing the map. A 3-dimensional terrain model was generated using digital maps and building models were prepared using the information from draft and digital maps. To develop a noise evaluation model, a noise-source map for each road was generated. The noise levels at 25 locations close to roads were measured and compared with the expected noise levels to verify the developed noise map. An excess noise map was generated by comparing the road-traffic noise map with a noise-standard map. Using the excess noise map, the areas exceeding environmental noise standards were effectively evaluated through a GIS space analysis. The 3-dimensional facade noise map was generated to calculate the number of people exposed to a certain noise level.     

Traffic noise reduction due to the screening effect of balconies on a building façade

In this paper we discuss the use of self-protecting buildings as a means of reducing traffic noise nuisance. The results obtained from a computer model of one self-protecting configuration, namely a closed balcony shielding a window into a room, are compared with measurements made on a 1:10 scale model of this situation. From a comparison of these results an empirical equation is given which permits the benefits of a closed balcony to be predicted from the application of standard noise screen formulae.Since the degree of annoyance experienced by people exposed to traffic noise has been shown to be influenced by temporal variations of level, the computer model was extended to enable the effect of the balcony on this variability to be assessed.     

Testing the accuracy of smartphones and sound level meter applications for measuring environmental noise

This paper reports on experimental tests undertaken to assess the capability of noise monitoring applications to be utilized as an alternative low cost solution to traditional noise monitoring using a sound level meter. The methodology consisted of testing 100 smartphones in a reverberation room. Broadband white noise was utilized to test the ability of smartphones to measure noise at background, 50, 70 and 90 dB(A) and these measurements were compared with true noise levels acquired via a calibrated sound level meter. Tests were conducted on phones using the Android and iOS platforms. For each smartphone, tests were completed separately for leading noise monitoring apps culminating in 1472 tests. The results suggest that apps written for the iOS platform are superior to those running on the Android platform. They show that one of the apps tested – SLA Lite – is within ±1 dB of true noise levels across four different reference conditions. The results also show that there is a significant relationship between phone age and its ability to measure noise accurately. The research has implications for the future use of smartphones as low cost monitoring and assessment devices for environmental noise.     

Active control of aircraft fly-over sound transmission through an open window

This paper presents an experimental work on active control of sound transmission through a restricted opening bottom hinged window. The main goal of the work is to demonstrate the feasibility of the active technique to limit the loss of attenuation due to the aperture of windows, and its application to aircraft fly-over incident noise. The experimental window is placed in an exposed façade of a dwelling close to an airport and subject to fly-by aircraft noise. The active control is configured to cancel the pressure at the aperture using a single-input single-output feedforward adaptive system. As a result, a reduction of sound transmission is achieved with low power consumption. In global terms, an increase of almost 3 dB of transmission loss (with respect to the partially opened window insulation values) in the low frequency range (below 160 Hz and according to the National Danish Method for evaluating low frequency noise) is demonstrated, which is equivalent to a reduction of 50% in the loss of insulation caused by opening the window.     

Estimating health related costs and savings from balcony acoustic design for road traffic noise

A multi-faceted study is conducted with the objective of estimating the potential fiscal savings in annoyance and sleep disturbance related health costs due to providing improved building acoustic design standards. This study uses balcony acoustic treatments in response to road traffic noise as an example. The study area is the State of Queensland in Australia, where regional road traffic noise mapping data is used in conjunction with standard dose–response curves to estimate the population exposure levels. The background and the importance of using the selected road traffic noise indicators are discussed. In order to achieve the objective, correlations between the mapping indicator (L_{A10 (18 hour)}) and the dose response curve indicators (L_den and L_night) are established via analysis on a large database of road traffic noise measurement data. The existing noise exposure of the study area is used to estimate the fiscal reductions in health related costs through the application of simple estimations of costs per person per year per degree of annoyance or sleep disturbance. The results demonstrate that balcony acoustic treatments may provide a significant benefit towards reducing the health related costs of road traffic noise in a community.     

复式降噪块地铁车轮减振降噪特性

为探究一种复式降噪块装置及其组合形式对某S型辐板地铁车轮的减振降噪效果和机理，在半消声室内，分别对1种自由状态下的标准车轮和3种形式的复式降噪块车轮开展振动声辐射特性及阻尼特性试验，并通过有限元建模对其进行了模态计算。结果表明：复式降噪块装置可在全频段内提高车轮阻尼比，并对车轮各部位有良好的减振效果，以轮辋和踏面的减振效果最为显著；其中，6个制振阻尼片形式的降噪块对车轮的降噪效果最显著，径向激励下的降噪量为13.1dB(A)，轴向激励下的降噪量为11.1dB(A)，降噪频段主要集中在1000Hz以上中高频。该文研究结果是对列车降噪研究领域的补充和发展。     

A theoretical comparison of three fringe analysis methods for determining the three-dimensional shape of an object in the presence of noise

Various levels of random noise have been added to simulated digital images of a spherical dome illuminated by fringes projected from an offset angle. The noisy images have then been analysed using Fourier transform profilometry, phase shifting profilometry and spatial phase detection. The theoretical dome was subtracted from the domes reconstructed using these methods to form error maps. The maximum and RMS errors for each error map were calculated and plotted against the added noise level. At low levels of added noise the phase shifting method produced the lower errors, but above around 10% noise the Fourier transform method was better. Only at very high levels of added noise did the spatial phase detection method achieve the lowest errors.     

Noise mitigation action plan of Pisa civil and military airport and its effects on people exposure

The “Galileo Galilei” airport is a civil and military airport quite close to central Pisa. Although the airport brings benefits in terms of tourism and different types of income, the air traffic growth exacerbates the exposition to aircraft noise. This could significantly affect public health. To this day, a small number of studies takes into account the standard indicators of Europe by considering noise emission data for military aircrafts. We estimated the noise impact produced by the airport and we evaluated the related exposed population by using the Integrated Noise Model (INM). The noise power levels of both commercial and military flights have been considered as an input to the model. Predicted levels were validated by means of a noise-monitoring network. A new tracking system (AirNav Radar) that captures Automatic Identification System (AIS) signals emitted by each aircraft has been used to emulate takeoff and landing procedures. This improves the accuracy of the input to the model. We simulated noise maps for present and future scenarios, including those following the application of noise reduction measures. For each situation, we also estimated the exposure of the population and the percentages of highly annoyed and highly sleep disturbed people. We show the utility of AIS data and their specific elaboration to draw up noise abatement measures in order to reduce the noise impact on population and allow the airport development.     

Industrial noise levels and annoyance in Egypt

Annoyance and increase of accident risk of workers from industrial noise levels in Egypt were studied. 683 workers from 15 Egyptian sites of industry, ranging from food to metal industry were evaluated. The goals of this study are to carry out measurements to evaluate industrial noise levels, are these levels exceeded the permissible levels set by Egyptian noise standard and policy to protect public health of workers?, to examine worker’s attitudes towards industrial noise, to know the relationship between industrial noise levels and degree of annoyance. Results showed that equivalent continuous noise levels ranged from 70 to 100 dB (A). Annoyance of respondents showed that 47.1% were highly annoyed, 5.8% their hearing were harmed. There was a strong relationship between industrial noise levels and percentage of highly annoyed respondents. By increasing industrial noise level possibility of workers to make accident was also increased. Respondents suggest less maximum daily exposure duration than those set by Egyptian law.