Synthesis, structure, and dielectric properties of KH2PO4 fractal aggregates

Macroscopic fractal aggregates of KH₂PH₄ (KDP) measuring up to 500 μm have been obtained. The fractal structure forms as a result of the precipitation of KDP particles from a supersaturated aqueous solution in the presence of a temperature gradient followed by a diffusioncontrolled mechanism of aggregation. The electron-microscopic analysis performed has shown that the fractals are formed predominantly from crystallites of the tetragonal modification measuring ∼1 μm. The dielectric constant (ɛ) of fractal KH₂PO₄ has been measured in the temperature range 80–300 K. A characteristic anomaly has been discovered on the ɛ(T) curve in the vicinity of 122 K, which attests to a ferroelectric phase transition. The absolute value of ɛ is significantly smaller than the components ɛ ₁₁ and ɛ ₃₃ for KH₂PO₄. Fiz. Tverd. Tela (St. Petersburg) 41, 2059–2061 (November 1999)     

铜(410)表面乙烯吸附与脱氢的理论研究

Adsorption and dehydrogenation of ethylene on Cu(410) surface are investigated with firstprinciples calculations and micro-kinetics analysis. Ethylene dehydrogenation is found to start from the most stable π-bonded state instead of the previously proposed di-σ-bonded state. Our vibrational frequencies calculations verify the π-bonded adsorption at step sites at low coverage and low surface temperature and di-σ-bonded ethylene on C-C dimer (C₂H₄-CC) is proposed to be the species contributing to the vibrational peaks experimentally observed at high coverage at 193 K. The presence of C₂H₄-CC indicates that the dehydrogenation of ethylene on Cu(410) can proceed at temperature as low as 193 K.     

Water adsorption on the Be(0001) surface: from monomer to trimer adsorption

In this paper, the density functional theory has been used to perform a comparative theoretical study of water monomer, dimer, trimer, and bilayer adsorptions on the Be(0001) surface. In our calculations, the adsorbed water molecules are energetically favoured adsorbed on the atop sites, and the dimer adsorption is found to be the most stable with a peak adsorption energy of ～437 meV. Further analyses have revealed that the essential bonding interaction between the water monomer and the metal substrate is the hybridization of the water 3a₁-like molecular orbital with the (s, p_z) orbitals of the surface beryllium atoms. While in the case of the water dimer adsorption, the 1b₁-like orbital of the H₂O molecule plays a dominant role.     

丙烷与O(3P)反应机理和动力学的理论研究

The reaction of C₃H₈+O(³P)→C₃H₇+OH is investigated using ab initio calculation and dynamical methods. Electronic structure calculations for all stationary points are obtained using a dual-level strategy. The geometry optimization is performed using the unrestricted second-order Møller-Plesset perturbation method and the single-point energy is computed using the coupled-cluster singles and doubles augmented by a perturbative treatment of triple excitations method. Results indicate that the main reaction channel is C₃H₈+O(³P)→i-C₃H₇+OH. Based upon the ab initio data, thermal rate constants are calculated using the variational transition state theory method with the temperature ranging from 298 K to 1000 K. These calculated rate constants are in better agreement with experiments than those reported in previous theoretical studies, and the branching ratios of the reaction are also calculated in the present work. Furthermore, the isotope effects of the title reaction are calculated and discussed. The present work reveals the reaction mechanism of hydrogen-abstraction from propane involving reaction channel competitions is helpful for the under-standing of propane combustion.     

Hydrogen storage of Mg1-xMxH2 (M=Ti, V, Fe) studied using first-principles calculations

In this work, the hydrogen storage properties of the Mg-based hydrides, i.e., Mg_1-xM_xH₂ (M=Ti, V, Fe, 0 ≤ x ≤ 0.1), are studied using the Korringa-Kohn-Rostoker (KKR) calculation with the coherent potential approximation (CPA) approximation. In particular, the nature and the concentrations of the alloying elements and their effects are studied. Moreover, the material's stability and hydrogen storage thermodynamic properties are discussed. In particular, we find that the stability and the temperature of desorption decrease without significantly affecting the storage capacities.     

Muon transfer in dµ + H2 collisions

The impact of excited state muon transfer in dμ + H₂ collisions has been investigated. The formation of metastable pdμ^* molecules and their subsequent decay into the pμ (1s) + d channel opens a transfer channel that is otherwise closed at the n=2 level. This mechanism enlarges the fraction of muons arriving to the ground state of the lighter isotope. The resulting ground state population P _1s ^pμ as function of deuterium concentration appears to be in qualitative agreement with recent measurements of the K _α X-ray yield in H₂/D₂ mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

利用原位傅里叶变换红外光谱诊断催化剂的特性和催化活性

The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy (FTIR) for the investigation of the crystal structure, thermal stability, redox behavior (temperature-programmed reduction/temperatureprogrammed re-oxidation) as well as the catalytic properties of Co₃O₄ thin films. The syntheses of Co₃O₄ were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm^-1 (υ₁) and 650 cm^-1 (υ₂) respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co₃O₄ spinel. The lattice stability limit of Co₃O₄ was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ₁ and υ₂ as a function of the temperature. Moreover, Co₃O₄ has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO₂ and H₂O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co₃O₄ follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.     

A Study on the Components of MgB2 Thick Film Preparedvia HPCVD

Superconducting MgB₂ thick film has been prepared via hybrid physical-chemical vapor deposition method on Al₂O₃ (0001) substrate by using B₂H₆ and magnesium ingot as raw materials reacted from 730 to 830°C for 40 min under 20 to 30 kPa. Its thickness is about 40 μm. The MgB₂ thick film shows T _c (onset) = 39.0 K and T _c (0) = 37.2 K. X-ray diffraction pattern shows that the film grown along (101) direction has small amount of impurities of Mg and MgO. Scanning electron microscopy and energy dispersive X-ray spectroscopy indicated that these impurities existed indeed and were Mg rich. The MgO film was formed on the surface of the MgB₂ thick film to further protect the sample from oxidation. We presented a new mechanism for the formation of the thick film. Translated from Chinese Journal of Low Temperature Physics, 2005, 27(1) (in Chinese)     

Turing pattern selection in a reactionben diffusion epidemic modelast

We present Turing pattern selection in a reaction—diffusion epidemic model under zero-flux boundary conditions. The value of this study is twofold. First, it establishes the amplitude equations for the excited modes, which determines the stability of amplitudes towards uniform and inhomogeneous perturbations. Second, it illustrates all five categories of Turing patterns close to the onset of Turing bifurcation via numerical simulations which indicates that the model dynamics exhibits complex pattern replication: on increasing the control parameter v, the sequence “H₀ hexagons → H₀-hexagon-stripe mixtures → stripes → H_π-hexagon-stripe mixtures → H_π hexagons” is observed. This may enrich the pattern dynamics in a diffusive epidemic model.     

C<Subscript>60</Subscript> fullerene as an η<Superscript>6</Superscript> ligand in π complexes of transition metals

The possible existence of complexes formed by the C₆₀ fullerene or its derivatives with transition metals interacting with the carbon cage via η⁶−π type bonding is discussed. The derivatives C₆₀ R ₆ of the C₆₀ fullerene (R = −, H, F, Cl, Br, CN) are analyzed using the density functional method within the Perdew-Burke-Ernzerhof approximation. In these molecules, the R groups are attached to carbon atoms located in the α positions with respect to the common hexagon of the C₆₀ fullerene. The structure and electron configuration of complexes formed by these molecules with Cr(C₆H₆), Cr(CO)₃, MoC₆H₆, and Mo(CO)₃ particles are modeled. The “dimer” systems C₆₀R₆-M-R ₆C₆₀ (M = Cr, Mo, R =-, H, F) are investigated in which two fullerene molecules interact via a transition-metal atom. It is found that the introduction of six R groups in the α sites with respect to the common hexagon of C₆₀ favors the formation of complexes of these derivatives of the C₆₀ fullerene with the Cr(C₆H₆), Cr(CO), Mo(C₆H₆), and Mo(CO)₃ particles in which η⁶-π type bonds arise between the metal and the atoms of the hexagon fringed with the R groups. It is also demonstrated that analogous complexes with a “bare” C₆₀ fullerene are possible, but they are significantly less stable. The (C₆H₆) M-R ₆C₆₀ R ₆-M (C₆H₆) complexes of particles M(C₆H₆) (M= Cr, Mo) and derivatives R ₆C₆₀ R ₆ (R =-, H, F, Cl, Br) are studied. In the R ₆C₆₀ R ₆ molecule, six R groups are located in the α sites with respect to the common hexagon of the C₆₀ fullerene and six other groups fringe the opposite hexagon. The obtained results can be applied to planning synthesis of new complexes that C₆₀ fullerene derivatives can form with transition metals. Original Russian Text ￠ E.G. Gal’pern, A.R. Sabirov, I.V. Stankevich, 2007, published in Fizika Tverdogo Tela, 2007, Vol. 49, No. 12, pp. 2220–2223.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.