Er3+/Ce3+共掺TeO2-Bi2O3-TiO2玻璃的热稳定性和光谱特性研究

用高温熔融法制备了Er³⁺/Ce³⁺共掺新型碲酸盐玻璃(TeO₂-Bi₂O₃-TiO₂).采用差热分析方法研究了玻璃的热稳定性,测试并分析了不同Ce³⁺离子掺杂浓度下Er³⁺离子的吸收光谱、上转换光谱和荧光光谱特性.研究结果表明,制备的碲酸盐玻璃具有很好的热稳定性,玻璃析晶温度Tx与玻璃转变温度Tg之差(ΔT=Tx-Tg)达到了185 ℃,高于其它文献的报道|同时,Ce3+离子共掺引入的能量转移(Ce³⁺∶2F5/2+Er³⁺∶4I11/2→Ce³⁺∶2F7/2+Er³⁺∶4I13/2)有效地抑制了Er³⁺离子上转换发光并显著增强了1.53 μm波段荧光强度,而发射截面随着Ce³⁺离子掺杂浓度相应增大.优异的热稳定性以及光谱性能揭示Er³⁺/Ce³⁺共掺碲酸盐玻璃是一种潜在的制备宽带掺铒光纤放大器的理想增益介质.     

Er3+/Ce3+共掺碲铋酸盐玻璃的制备及光谱特性提高研究

采用高温熔融退火法制备了系列 80TeO₂-10Bi₂O₃-10TiO₂-0.5Er₂O₃-xCe₂O₃ (x=0,0.25, 0.5,0.75,1.0 mol%)和(80-y) TeO₂-10Bi₂O₃-10TiO₂-yWO₃-0.5Er₂O₃-0.75Ce₂O₃ (y=3,6,9,12 mol%)的碲铋酸盐玻璃.测试了玻璃样品400-1700 nm范围内的吸收光谱, 975 nm抽运下的上转换发光谱和1.53 μm波段荧光谱, 以及808 nm激励下的Er³⁺离子荧光寿命和无掺杂玻璃样品的Raman光谱, 并结合Judd-Ofelt理论和McCumber理论计算了Er³⁺离子光谱参数.结果表明, 在掺Er³⁺碲铋酸盐玻璃中引入Ce³⁺离子进行Er³⁺/Ce³⁺共掺, 通过Er³⁺离子⁴I_11/2能级与Ce³⁺离子²F_5/2 能级间基于声子辅助的能量传递过程,可以有效抑制Er³⁺离子上转换发光并明显增强其 1.53 μm波段荧光;同时,在现有Er³⁺/Ce³⁺共掺玻璃组分基础上引入WO₃, 可进一步提高1.53 μm波段荧光并展宽其荧光发射谱. 研究结果对于获取优异光谱特性的宽带掺Er³⁺光纤放大器玻璃基质具有实际意义.     

Er3+/Yb3+共掺碲钨酸盐玻璃的光谱性质和热稳定性的研究

制备了Er³⁺和Yb³⁺共掺的碲钨酸盐玻璃样品65TeO₂-25 WO₃-10R_mO_n(R_mO_n=PbO,BaO),(65+x)TeO₂-(25-x)WO ₃-10La₂O₃ (x=0,5,10), (60+x)TeO₂-(30 -x)WO₃-10Bi₂O₃ (x=0,5,10).测试了玻璃样品的吸收光谱、荧光光谱、能级寿命及热稳定性能.结果表明除含Bi ₂O₃的碲钨酸盐玻璃外，其余玻璃样品均没出现析晶开始温度(T_x)，说明碲钨酸盐 是一种适合于光纤拉制的玻璃基质材料.应用Judd-Ofelt理论计算了强度参数Ω_t(t=2, 4,6)，研究表明Ω₂在碲钨酸盐玻璃中主要受到Er-O键的共价性的影响，而Er^{3 +} 离子周围配位场的非对称性影响可以忽略.测得了Er³⁺在15 μm发射谱的荧光 半高宽 (FWHM=71—77nm)和Er³⁺的⁴I_13/2能级寿命 (τ^m=3—34 ms).应用McCumber理论计算了Er³⁺在15 μm处的受激发射截面(σ^peak=068—103×10^-20 cm²).比较了Er³⁺在不同玻璃基质里 的15 μm荧光带宽和发射截面，研究结果表明碲钨酸盐玻璃是一种制备宽带光纤放大器的理想基质材料.     

Tm3+/Yb3+共掺碲酸盐玻璃的近红外发光及能量传递机理

采用高温熔融法制备了组分为TeO₂-ZnO-Na₂O的Tm³⁺离子单掺和Tm³⁺/Yb³⁺共掺碲酸盐玻璃,应用Judd-Ofelt理论计算分析了玻璃样品的强度参量Ω_t(t=2, 4, 6),自发辐射跃迁几率A,荧光分支比β和荧光辐射寿命τ_rad等光谱参量,测量得到了不同Yb³⁺离子掺杂浓度下玻璃样品的Tm³⁺离子上转换发光谱.结果显示,在980 nm泵浦光激励下玻璃样品发射出强烈的近红外上转换荧光.对Tm³⁺离子上转换发光分析表明,强烈的Tm³⁺离子近红外上转换发光主要来自于Yb³⁺/Yb³⁺离子间的共振能量传递以及基于单声子和双声子辅助的Yb³⁺/Tm³⁺离子间的非共振能量传递过程,并进一步计算得到了声子贡献比和能量传递系数.最后,计算分析了Tm³⁺:³F₄→³H₆能级间跃迁的1.8 μm波段吸收截面、受激发射截面和增益系数.研究表明,Yb³⁺/Tm³⁺共掺TeO₂-ZnO-Na₂O玻璃可以作为近红外波段固体激光器的潜在增益基质.     

Er3+及Er3+/Yb3+掺杂ZrO2-Al2O3的制备及发光性质

采用共沉淀法制备了纳米晶ZrO₂-Al₂O₃∶Er³⁺发光粉体.所制备的粉体室温下具有Er3+离子特征荧光发射,主发射在绿光,其中位于547 nm、560 nm的绿光最强,并得出稀土离子与基质之间有能量传递.对不同煅烧温度下的样品研究表明:因不同温度下所制得的样品晶相不同.研究了纳米晶ZrO2-Al2O3∶Er3+及ZrO₂-Al₂O₃∶Er³⁺/Yb³⁺的上转换发光,并分析了上转换的跃迁机制.发现ZrO₂-Al₂O₃∶Er³⁺的绿光为双光子过程,而ZrO₂-Al₂O₃∶Er³⁺、Yb³⁺的上转换光谱中,红光和绿光也为双光子过程,而极弱的蓝光为三光子过程.讨论了Er³⁺的浓度猝灭现象.最适宜掺杂浓度的原子分数为2%（Er³⁺/Zr⁴⁺）.     

Ce3+ 掺杂高密度氧化物玻璃的闪烁性能研究

用高温熔融法制备了以SiO₂-B₂O₃-Al₂O₃-Gd₂O₃为基质系统Ce³⁺掺杂的玻璃样品, 测试样品的密度、紫外——可见透射光谱、紫外激发光谱和主要的闪烁性能, 并且把一部分闪烁性能和PbWO晶体及BGO晶体做比较. 着重研究了不同Ce³⁺掺杂浓度与Gd³⁺ 离子的含量对玻璃样品闪烁性能的影响规律. 结果表明: 玻璃样品具有较大的密度; 样品的X射线激发发射光谱发射峰位置都在390 nm左右, 当Ce³⁺ 离子的掺杂浓度为1.0 mol%(摩尔分数)、Gd₂O₃含量为15 mol%时, 玻璃样品的发光峰强度达到BGO晶体发光强度的90%; 同样验证了Ce³⁺ 离子具有浓度猝灭效应; Gd³⁺可以敏化Ce³⁺离子发光, 但是Gd³⁺离子到达一定浓度时, 反而会产生猝灭效应, 降低了Ce³⁺ 离子的发光. Ce³⁺ 离子掺杂SiO₂-B₂O₃-Al₂O₃-Gd₂O₃系统的闪烁玻璃有望替代闪烁晶体广泛应用于高能物理中.     

LD抽运Er3+，Yb3+共掺磷酸盐玻璃被动调Q激光器的理论分析和数值计算

研究了以Co²⁺:MgAl₂O₄晶体为饱和吸收体的LD抽运Er³⁺,Yb³⁺共掺磷酸盐玻璃激光器.针对双掺离子之间的能量传递和Er³⁺的多种跃迁过程，结合Co²⁺:MgAl₂O₄晶体中Co²⁺离子的饱和吸收特性，给出了详尽的速率方程，在其基础上进行了数值分析，分析了输出镜透过率、激光介质长度、谐振腔长度、腔内往返损耗、饱和吸收体长度对激光阈值、峰值功率、单脉冲能量以及脉冲宽度的影响.     

Er3+/Yb3+共掺Gd3Sc2Ga3O12晶体的上转换发光

研究了提拉法生长的Er³⁺/Yb³⁺:Gd₃Sc₂Ga₃O₁₂和Er³⁺:Gd₃Sc₂Ga₃O₁₂晶体在室温下320—1700nm范围的吸收光谱和500—750nm范围内的上转换荧光谱,同时对其上转换荧光的可能发生机制、途径以及上转换过程可能对Er^{3+相似文献}   

OH-对磷酸盐铒玻璃光谱性质的影响

本文系统研究了Yb³⁺、Er³⁺共掺磷酸盐铒玻璃中OH^-含量与铒玻璃荧光寿命和光谱性质的关系.结果表明OH^-基团的存在使得Er³⁺离子的荧光强度显著降低,荧光寿命大大缩短.比较了三种不同Al₂O₃含量(5mol%,8mol%和13mol%)的铒玻璃在2.9μm波长处的红外吸收系数与铒离子荧光寿命的关系,发现玻璃中OH^-在2.9μm的吸收系数和Er³⁺的⁴Ⅰ_13/2能级离子衰减速率成线性关系,不同Al₂O₃含量的玻璃具有不同Er³⁺和OH^-基团的相互作用参量和不同的荧光寿命值及量子效率.并从玻璃结构上解释了Al₂O₃含量对除水机制和光谱性质的影响.经过充分除水后的铒玻璃荧光寿命可达到9.1ms.     

Tm3+/Yb3+ ∶LaF3纳米体系中掺杂Yb3+ 离子对Tm3+ 离子荧光发射的影响

为研究Yb³⁺离子浓度变化对Tm³⁺离子在蓝色波段荧光强度的影响,以NaF和La(NO₃)₃为原料,采用水热法制备了Tm³⁺和Yb³⁺共掺的Tm³⁺/ Yb³⁺∶LaF₃纳米颗粒.用X射线衍射对LaF₃纳米颗粒进行表征的结果显示,纳米晶体结构呈六方相.透射电镜的观测结果显示,纳米颗粒样品大小均匀、分散性良好.在波长为800 nm的激光激发下,观测到了上转换蓝光发射,其中包括波长为474 nm和479 nm的较强的荧光辐射(相应的跃迁为1G4→3H6)和波长位于450 nm的强度较弱的荧光发射(相应的跃迁为1D2→3F4).通过观测不同Yb³⁺离子浓度条件下共掺Tm³⁺/Yb³⁺∶LaF₃样品的荧光光谱,研究了Yb³⁺离子掺杂浓度对于Tm³⁺离子的荧光发射的影响,并探讨了产生这种现象的原因.研究结果显示,对于1G4→3H6跃迁产生的荧光发射(474 nm),当Yb³⁺离子浓度增大时,反向能量传递速率的增加导致了荧光强度的增大.然而,当Yb³⁺离子浓度增大到一定程度时,Yb³⁺离子激发态能级寿命的减少将引发荧光强度的下降.相比较而言,Yb³⁺离子的浓度的变化对于1D2→3F4跃迁产生的位于450 nm处荧光强度的影响较弱.     

Er3+/Yb3+共掺TeO2-WO3-Bi2O3玻璃的光谱性质和上转换发光

本文制备了Er³⁺/Yb³⁺共掺TeO₂-WO₃-Bi₂O₃(TWB)玻璃. 测试和分析了样品的吸收光谱、荧光光谱及上转换发光. 用Judd-Oflet(J-O)理论计算了Er³⁺在玻璃样品中的光谱强度参数,随着Bi₂O₃含量的增加,Ω₂增加,Ω₄ 关键词： 碲酸盐玻璃 光谱性质 上转换     

Er3+及Er3+/Yb3+共掺铋酸盐玻璃光谱性质研究

制备了Er³⁺及Er³⁺/Yb³⁺共掺铋酸盐玻璃，测试了样品的吸收光谱、荧光光谱.应用Judd-Oflet理论计算了Er³⁺在铋酸盐玻璃中的光谱强度参数，分别为Ω₂=(5.47—2.92)×10^-20cm²，Ω₄=(2.16—1.22)×10^-20cm², 关键词： 3+')" href="#">Er³⁺ 铋酸盐玻璃 3+/Yb³⁺共掺')" href="#">Er³⁺/Yb³⁺共掺 光谱性质     

Spectroscopic properties in Er Er3+/Yb3+Co-doped fluorophosphate glass

Using the technique of high-temperature melting, a new Er³⁺/Yb³⁺ co-doped fluorophosphate glass was prepared. The absorption and fluorescence spectra were investigated in depth. The effect of Er³⁺ and Yb³⁺ concentration on the spectroscopic properties of the glass sample was also discussed. According to the Judd-Ofelt theory, the oscillator strength was computed. The lifetime of ⁴I_13/2 level (τ_m) of Er³⁺ ions was 8.23 ms, and the full width at half maximum of the dominating emission peak was 68 nm at 1.53 τ_m. The large stimulated emission cross section of the Er³⁺ was calculated by the McCumber theory. The spectroscopic properties of Er³⁺ ion were compared with those in different glasses. The full width at half maximum and σ_e are larger than those of other glass hosts, indicating this studied glass may be a potentially useful candidate for high-gain erbium-doped fiber amplifier.     

Fabrication and luminescence behavior of phosphate glass ceramics co-doped with Er3+ and Yb3+

Transparent phosphate glass ceramics co-doped with Er³⁺ and Yb³⁺ in the system P₂O₅Li₂OCaF₂TiO₂ were successfully synthesized by melt-quenching and subsequent heating. Formation of the nanocrystals was confirmed by X-ray powder diffraction. Judd–Ofelt analyses of Er³⁺ ions in the precursor glasses and glass ceramics were performed to evaluate the intensity parameters Ω_2,4,6. Under 975 nm excitation, intense upconversion (UC) and infrared emission (1545 nm) were observed in the glass ceramics by efficient energy transfer from Yb³⁺ to Er³⁺. The luminescence processes were explained and the emission cross section was calculated by Fuchtbauer–Ladenburg (F–L) formula. The results confirm the potential applications of Er³⁺/Yb³⁺ co-doped glass ceramics as laser and fiber amplifier media.     

Synthesis, characterization, optical absorption, luminescence and defect centres in Er3+ and Yb3+ co-doped MgAl2O4 phosphors

The Er³⁺–Yb³⁺ co-doped MgAl₂O₄ phosphor powders have been prepared by the combustion method. The phosphor powders are well characterized by X-ray diffraction (XRD) and energy dispersive (EDX) techniques. The absorption spectrum of Er³⁺/Er³⁺–Yb³⁺ doped/co-doped phosphor powder has been recorded in the UV–Vis–NIR region of the electro-magnetic spectrum. The evidence for indirect pumping under 980 nm excitation of Er³⁺ from Yb³⁺ was observed in the MgAl₂O₄ matrix material. Electron spin resonance (ESR) studies were carried out to identify the defect centres responsible for the thermally stimulated luminescence (TSL) process in MgAl₂O₄:Er³⁺ phosphor. Three defect centres were identified in irradiated phosphor by ESR measurements which were carried out at room temperature and these were assigned to an O^? ion and F⁺ centres. O^? ion (hole centre) appears to correlate with the low temperature TSL peak at 210 °C and one of the F⁺ centres (electron centre) is related to the high temperature peak at 460 °C.     

The fluorescence properties of Yb3+ and Er3+ Co-doped YAl3(BO3)4 powders prepared by sol-gel method

Yb³⁺ and Er³⁺ co-doped YAB powders were prepared by sol-gel method. The structure and fluorescence properties were investigated. XRD pattern indicated that the single phase was obtained at 1150°C and the structure belonged to rhombohedral. Under 379 nm excitation, two emissions around 983 nm and 1531 nm were observed and the effect of Yb³⁺ ion concentration on the emission intensity was discussed. The energy transfer was observed under 930 nm excitation and the energy transfer efficiencies for all samples were calculated. The lifetimes of ² F _5/2 level of Yb³⁺ ion and ⁴ I _13/2 level of Er³⁺ ion were measured and the effect of Yb³⁺ ion concentration on the lifetime was also discussed. The results indicated that there was an additional mechanism for the decay of ⁴ I _13/2 level in powder samples. The Yb³⁺ and Er³⁺ co-doped YAB powders should be a potential candidate for ceramic laser materials.     

Enhancement of up-conversion luminescence in Zn2SiO4:Yb3+, Er3+ by co-doping with Li+ or Bi3+

Yb³⁺/Er³⁺ co-doped Zn₂SiO₄ ceramics are rapidly synthesized by the microwave radiation method. Green and red up-conversion emissions are observed in Zn₂SiO₄: Yb³⁺, Er³⁺ ceramics under 980 nm excitation. The influence of co-doped Li⁺ or Bi³⁺ ion on luminescence intensity for the phosphors has been investigated. At Li⁺ or Bi³⁺ doping concentration of 1 mol%, up-converted green emission can be increased by 6 times and 20 times, respectively. It is believed that co-doped Li⁺ or Bi³⁺ ion results in the local distortion of Er³⁺ in Zn₂SiO₄, increasing the intra-4f transitions of Er³⁺ ions. The local distortion is proved by spectral probing method with Eu³⁺.     

Amplifying Characteristics of Er3+/Yb3+ Co-Doped Parallel-Cascaded Double Microring Resonators

Abstract

In terms of the coupled mode theory, formulas of the transfer function and the output power gain are presented for an Er³⁺/Yb³⁺ co-doped parallel-cascaded double microring resonator. Around the pump wavelength of 0.98 μm and the central signal wavelength of 1.55 μm, analysis is performed for the dependence of the output power gain on the pump power, signal power, dopant concentration, amplitude coupling ratio, and ring spacing. The results show that the output power gain of this device is much larger than that of the Er³⁺/Yb³⁺ co-doped waveguide amplifier with identical waveguide lengths. In the case of the amplitude coupling ratio κ = 0.064, ring spacing L₂ = 10π R, pump power P_p0 = 8 mW, signal power P_s0 = 37.2 μW, Er³⁺ ion concentration N_Er = 1 × 26 m^?3, and Yb³⁺ ion concentration N_Yb = 3 × 27 m^?3, the device can produce higher signal power gain from 11.9 dB even up to 70 dB.     

混合形成体对掺铒碲酸盐玻璃的热力学稳定性和发光性能的影响

研究了混合形成体效应对掺铒碲酸盐玻璃热力学稳定性、1.53 μm发光特性和上转换发光强度的影响.通过拉曼光谱测试,分析了WO₃,Nb₂O₅,GeO₂等氧化物对Er³⁺离子配位场结构,以及对发光谱的非均匀展宽机理的作用.结果表明,通过掺杂适当声子能量的网络形成体氧化物,不但可获得热力学稳定性较好的玻璃,还可有效降低Er³⁺离子⁴I_11/2能级的寿命,在抑制Er³⁺离子在可见光波段的上转换发光的同时不致劣化其在1.53 μm的发光特性.本文制得的碲酸盐玻璃具有较大的受激发射截面((9.64—10.96)×10^-21cm²)和荧光半高宽(FWHM)(50—67 nm),热力学稳定性良好,是一种理想的掺Er³⁺宽带有源光纤用基质玻璃. 关键词： 掺铒碲酸盐玻璃 混合形成体 1.53 μm发光 声子能量