CUO分子结构与势能函数

用密度泛函理论的B3LYP方法,对铀原子采用14个价电子的准相对论有效原子实势及(6s5p2d4f)[3s3p2d2f]收缩价基集合,碳、氧原子采用6311G全电子基集合,应用Gaussian98程序对一氧化碳气体与铀表面相互作用的可能分子结构CUO(角形Cs和线形C∞v构型)分子进行几何优化计算,得到了稳定结构的几何构形、能量、谐振频率、力学性质和电性质,并用微观可逆性原理分析了其可能的离解极限.结果表明,势能函数等值势能面图能清晰地再现CUO分子的结构特征和离解能;铀原子与一氧化碳的反应是势垒较低、容易进行的反应 关键词： CUO 密度泛函理论 分子结构 势能函数     

铀与水蒸气体系的热力学性质计算

应用Gaussian 98程序对U-H₂O体系所有可能的构型进行优化计算-采用密度泛函 理论的B3L YP方法和MP2方法，对铀原子采用相对论有效原子实势及(6s5p2d4f)/［3s3p2d2f］收缩价基 集合，氧、氢原子采用6-311G^**全电子基集合-计算得到了6种五重态的相对稳 定结构 的电子状态、几何结构、能量、谐振频率、力学性质和电性质等-结果表明，H₂ O蒸汽在金 属铀表面的反应首先是铀和氧的相互作用-对C_{2v关键词： 密度泛函理论 B3LYP 分子结构 热力学函数}     

锕系双原子分子的从头算研究

用相对论有效原子实势（RECP）和密度泛函方法（B3LYP）,采用U和Pu原子的紧缩价基集合[5s4p3d4f]/[3s3p2d2f],优化了U2和Pu2分子的平衡结构,得到它们的键长（LBL）和短键长（SBL）分别为：U2分子是0．38965和0．29927nm,Pu2分子是0．45375和0．35202nm;导出了基态和最低激发态的势能函数,计算出它们的力常数、光谱数据和离解能。     

对元素基态电子组态表中几个“特殊”组态的解释

在Pauli不相容原理和能量最低原理的限制下,处于基态时原子中的电子按照 1s,2s,2 p, 3s,3 p,4 s,3d,4p,5s,4d,5p,6s,4f,5d,6p,7s,5f,6d的次序[1]填充,得出原子基态时的电子组态.但是,在元素基态电子组态表[2]中,有十九个“例外”,形成“特殊”的电子组态.其原因需要研究影响ns,(n—1)d,(n—2)f壳层能量的因素《特别是n很大时》. 量子力学中,作为中心力场近似的 Hartree-Fork自洽场方法,给出了多电子原子的能量公式[3] 式中,第一项是单电子原子实的能量(忽略了与所有其他别的电子的相互作用);第二项是两电子相互作用的库仑能,它表示电子密…     

过渡金属原子电子结构的多体微扰理论计算

利用多体微扰理论(MBPT)计算了过渡金属原子的电子结构,考虑到能量的二级微扰修正E₂。基集取为STO(8s6p4d1f)。对络原子的计算结果与实验符合很好。     

AIM Study on the Reaction of CH2SH Radical with Fluorine Atom

采用MP2(Full)/6-311G(d,p)、QCISD(T)/6-311++G(2df,p)和B3LYP/6-311G(d,p)方法研究了CH2SH自由基与F原子的反应．F原子通过进攻自由基上的C原子或S原子形成三种不同的反应通道．计算结果表明F原子进攻自由基上的C原子生成CH2S和HF为主要的反应通道．对反应进程中若干关键点进行了电子密度拓扑分析,找到了该反应的结构过渡区(结构过渡态)和能量过渡态．计算结果表明,对于比较显著的吸热或放热反应,其结构过渡区范围很小,对于吸热或放热不太显著的反应,结构过渡区范围较大.     

CuPc/ITO结构的表面和界面电子态的XPS研究

覆盖有Indium tin oxide(ITO)膜的透明导电玻璃广泛地用作有机发光器件 (OLEDs)的空穴注入电极 ,但是ITO膜的功函数通常与空穴传输材料的最高被占据分子轨道 (HOMO)不匹配。铜酞菁 (CuPc)作为缓冲层可以提高空穴从ITO向空穴传输材料的注入效率。对CuPc ITO样品的XPS表面分析表明 ,在CuPc分子中 ,铜原子显 2价 ,通过配位键和氮原子相互作用。CuPc分子中有两类碳原子 :8个C原子与 2个N原子成键 ;其余 2 4个C原子具有芳香烃性质。N原子也处在两种化学环境中 :有 4个N原子只与 2个C原子形成CNC键 ;另外 4个N原子不仅与 2个C原子成键 ,还通过配位键与Cu原子成键。用氩离子束对样品表面进行了溅射剥蚀 ,当溅射时间分别为 2 ,5 ,10min时进行XPS采谱分析 ,结果表明 ,随着氩离子束溅射时间增长 ,C 1s,N 1s峰变弱 ,Cu 2p ,O 1s,In 3d,Sn 3d峰增强 ,C 1s,N 1s,O 1s,In 3d和Sn 3d峰都向高束缚能或低束缚能方向移动 ,但它们的情况却不相同。     

高离化态类氖离子的电子碰撞激发特性研究

利用基于多组态Dirac-Fock(MCDF)理论方法的原子结构和性质计算程序GRASP92和全相对论扭曲波电子碰撞激发计算程序REIE06,系统计算了类氖离子(Z=50—57)激发组态2s22p53l和2s2p63l(l=s,p,d)的能级结构和碰撞激发截面,总结了碰撞激发截面随入射电子能量的变化规律,讨论了实验中感兴趣的(2p1/23d3/2)1→2s22p61S0(标记为3C线)与(2p3/23d5/2)1→2s22p61S0(标记为3D线)跃迁线强度比值的沿等电子系列特性和强组态相互作用对高离化态类氖离子截面的影响.     

稀有类铥铋离子辐射光谱的相对论识别

用全相对论多组态自洽场方法,计算了高离化类铥铋原子BiXV的1s、2s、2p-、2p、3s、3p-、3p、3d-、3d、4s、4p-、4p、4d-、4d、4f-、4f、5s、5p-、5p、5d-、5d、5f-、5f、5g-、5g、6s、6p-、6p、6d-、6d、6f-、6f、6g-、6g、7s、7p-、7p、7d-、7d、7f-、7f、7g-、7g、8s、8p-、8p、8d-、8d轨道的2249个精细结构能级和辐射寿命以及其他各种跃迁参数.能级和波长的计算值和实验值符合得好.另外还发现了一些辐射寿命较长的亚稳态能级.     

碳吸附于Fe（100）表面的第一性原理研究

本文采用自旋极化密度泛函理论计算了清洁Fe（100）表面及C吸附于Fe（100）表面三种结构: p(2×2)、c(2×2)及p(2×1)。清洁Fe(001)表面只有弛豫,没有重构。吸附C原子的Fe表面体系,最稳定位置为四重空位,空位吸附的C原子实际上与Fe成五重键,这与实验相符。通过对c(2×2)表面结构的电子态密度计算,发现C原子的s、p态与表面Fe原子的d、p及s态都有不同程度的相互作用,成键的主要作用为C2p态与Fe3dx2-y2、3dxy 态的杂化。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.