石膏溶解相变过程中流体效应的拉曼光谱研究

应用拉曼光谱仪,原位观测了不同流体中石膏随温度变化的溶解相变过程。纯水流体升温过程中,石膏在170～190℃范围内发生脱水,相变为无水石膏,随后升至250℃再快速降至常温,无水石膏无变化,脱水相变过程不可逆;1mol.L-1 Na2SO4溶液升温过程中,石膏在170～190℃范围内发生脱水,相变为无水石膏,升至250℃再快速降至常温,无水石膏重新相变为含水石膏,脱水相变过程可逆。该研究反映流体效应会影响矿物溶解相变机制,研究过程中不可忽视。     

290K下0.1～600MPa水的Raman光谱原位研究

在 2 90K和 0 0 1～ 6 0 0MPa条件下 ,就压力对液态水对称伸缩振动的影响进行了原位Raman散射光谱研究。表明 :( 1)在 0 1～ 2 0 0MPa范围内 ,(ν1) max随着压力升高而减小 ;( 2 )在 2 0 0～ 4 0 0MPa范围内 ,压力升高导致 (ν1) max增大 ,并在 4 0 0MPa时达到最大值 ;( 3) (ν1) max随着压力的进一步升高 ( >4 0 0MPa)而降低。这表明在 2 0 0和 4 0 0MPa时 ,液态水结构的变化是不连续的 ,这也与在该压力范围内rOO 的变化特征是一致的。可认为与冰Ⅰh→冰Ⅲ→冰Ⅴ的相变相类似 ,也许存在液态水Ⅰh→水Ⅲ→水Ⅴ的相变     

方解石高压相变的拉曼光谱研究

应用金刚石压腔结合拉曼光谱技术研究了方解石-Ⅰ在静水高压作用下相转变为方解石-Ⅲ的过程.结果表明,压力增大的过程中,方解石-Ⅰ晶体的三个拉曼特征峰均向高频移动;在1 103 MPa条件下,体系中的水介质结冰,冰点处方解石-Ⅰ晶体性质没有变化;继续加压至1 752 MPa时矿物的拉曼特征峰发生了突变,表明晶体由方解石-Ⅰ相转变为方解石-Ⅲ相中的的A型方解石;相变后矿物的拉曼特征峰显示了从矿物内部向边缘的过渡中,相变程度逐渐增大的趋势;该研究也体现了金刚石压腔结合拉曼光谱技术在定性分析矿物结构相变过程中原位测试的优势.     

石膏的高压原位Raman光谱和相变研究

 利用金刚石对顶砧（DAC）高压装置产生高压,在0~35 GPa压力范围,对石膏（Gypsum,CaSO₄·2H₂O）晶体进行了高压原位Raman光谱研究。根据高压Raman光谱的实验数据,给出了石膏晶体Raman振动频率与压力的依赖关系;在4.5 GPa附近,在对称性伸缩振动范围,发现新的Raman峰1 012  cm^-1出现,这个峰的强度随压力升高逐渐增强,据此断定在4.5 GPa 附近,石膏晶体发生了压力导致的结构相变。     

β-BaB2O4晶体高压相变的X光衍射研究

 我们用金刚石压砧装置（DAC）高压X射线粉末衍射照相方法，研究了β-BaB₂O₄晶体的相变。压力从0.1 MPa逐步加至17.6 GPa，发现BBO由室温下的六方相经历了若干次相变后，当压力加至11.5 GPa时，转变为无定形相。在11.5 GPa压力前的相变是可逆的，一旦进入无定形相，则相变是不可逆的。     

冲击加载条件下融石英对水的凝固相变的诱导效应

利用轻气炮冲击加载手段和透光性在线测试技术研究了融石英对水的再冲击结冰相变过程的影响.实验结果表明,当再冲击压力为1.28 GPa时,与融石英直接接触的水会发生凝固相变,而与融石英不接触的水在约2 μs观测期间仍然保持液相,证实融石英对水的冲击凝固相变过程产生了明显的诱导作用.同时还给出了相变动力学的解释. 关键词： 冲击 水 相变     

高压下NaCl水溶液的Raman光谱不连续性的证据

在温度21 ℃和压力50～1 100 MPa范围内利用碳化硅压腔进行了10％的NaCl水溶液的Raman光谱的原位测量和研究。研究发现：溶液的Raman拟合谱峰在50～300 MPa压力范围内,随着压力的增加向低波数方向移动,在约300 MPa时达到最小值;在300～800 MPa压力范围内,压力的升高则导致谱峰向高波数方向移动,在约800 MPa时达到最大值;随着压力的进一步升高(＞800 MPa),谱峰又向低波数方向移动。类似地,拟合谱峰的峰面积比值和半高宽在压力约300和800 MPa时也发现了不连续现象。这表明高压下NaCl水溶液的内部结构是不连续的,溶液中的氢键(O—H…Cl-)发生了相应的变化,意味着溶液中出现了结构的重新排列,产生了较为复杂的结构构型。     

纳米二氧化铈的高压拉曼光谱研究

本文利用金刚石对顶砧高压技术,在0.1MPa～47.5GPa压力范围内对粒径为8nm的纳米CeO2进行了高压拉曼光谱研究。研究结果表明,常压下萤石结构的纳米CeO2(空间群Fm3m)在24.3GPa时开始发生萤石结构到PbCl2类型(空间群Pnam)的结构相变。这个相变为可逆相变,卸压至零压时样品恢复至萤石结构。     

直流偏压对压力诱导反铁电陶瓷去极化性能的影响

采用掺铌的锆钛锡酸铅（PNZST）反铁电陶瓷作为研究对象,研究了不同的直流电场作用下,等静压力诱导极化态反铁电陶瓷发生去极化过程（同时发生铁电/反铁电相变）的规律.当极化态样品两端电场强度为6 kV/cm时,去极化压力为128.8 MPa;当极化态样品两端电场强度为-6 kV/cm时,去极化压力为74.2 MPa.在与极化电场方向相反的外加电场作用下极化态样品具有较小的去极化压力.讨论了外加直流电场影响极化态反铁电陶瓷去极化压力的内在机理.得到了不同外置电场下的去极化压力,并绘制了该材料的外加直流电场（< 关键词： 去极化 反铁电体 相变     

静水压下锆锡钛酸铅铁电陶瓷相变和介电性能研究

研究了铌掺杂锆锡钛酸铅铁电陶瓷Pb_0.99Nb_0.02[(Zr_0.90Sn_0.10)_0.96Ti_0.04]_0.98O₃(PZST 90/10-4-2Nb)在静水压(0-300 MPa)下的电荷释放量和介电性能. 对压力诱导的低温铁电三方(F_R(LT))→反铁电正交(A_O)相变进行了研究. PZST 90/10-4-2Nb铁电陶瓷分为未极化、极化和压力去极化三种. 极化PZST 90/10-4-2Nb陶瓷F_R(LT)→A_O相变过程中,电荷释放量为29.3 μC/cm²,相变压力为140 MPa. 介电性能表明:极化PZST 90/10-4-2Nb陶瓷相变压力为136 MPa,而未极化陶瓷相变压力为104 MPa,压力去极化陶瓷未表现出明显的相变特征. 关键词： 静水压 铁电陶瓷 相变 介电     

The effect of hydrostatic pressure on the ferroelectric phase transition in [NH2(CH3)2]3[Sb2Cl9]

The effect of hydrostatic pressure on the ferroelectric phase transition temperature in [NH₂(CH₃)₂]₃[Sb₂Cl₉] (DMACA) has been studied by electric permittivity measurements at pressures up to 400 MPa. The pressure-temperature phase diagram is given. The phase transition temperature (T_c) increases with increasing pressure up to 150 MPa, passes through a maximum and then decreases with a further increase of pressure. The unexpected nonlinear decrease in T_c with pressure increasing above 150 MPa suggests that the mechanism of ferroelectric phase transition in DMACA is different from hitherto assumed.     

Raman Spectroscopic Studies of Pressure-Induced Phase Transitions on 1-Dodecene

Raman spectroscopic features of 1-dodecene are studied in a moissanite anvil cell up to 3.0 GPa at 21℃. Our data indicate that 1-dodecene is chemically stable under the experimental condition because no new Raman peaks can be observed. However, two significant discontinuities in the plots of Raman shift versus pressure indicate two phase transitions of 1-dodecene. One is liquid~olid transition at pressure of about 500 MPa, the other is solid-solid phase transition at pressure from 1300 to 1550 MPa. The latter is considered to be related to the orientational change of the plane structure of ethylene. A rudimentary phase diagrams for 1-dodecene, n-pentane, n-hexane are proposed based on the results and previous data.     

Anomalous suppression of superfluidity in 4He confined in a nanoporous glass

We explore the superfluidity of 4He confined in a porous glass, which has nanopores of 2.5 nm in diameter, at pressures up to 5 MPa. With increasing pressure, the superfluidity is drastically suppressed, and the superfluid transition temperature approaches 0 K at some critical pressure, Pc approximately 3.4 MPa. The feature suggests that the extreme confinement of 4He into the nanopores induces a quantum phase transition from a superfluid to a nonsuperfluid at 0 K and at Pc.     

Phase-transition phenomena of 0.8 microm superfluid 3He slab

We have investigated the transition phenomena of superfluid 3He in thin 0.8 microm slabs with a cw-NMR method. We found that, just below the phase-transition temperature, only the A phase appeared at any pressure. At lower temperatures, the phase transition to the B phase occurred between 0.3 and 2.74 MPa. We obtained a universal critical thickness delta as a function of pressure. When the reduced slab thickness, d/xi(T), is smaller than delta, only the A phase becomes stable.     

Raman Scattering Spectroscopy of Phase Transition in n-Pentadecane under High Temperature and High Pressure

The Raman spectroscopy of n-pentadecane is investigated in a moissanite anvil cell at normal temperatures and a diamond anvil cell under pressure to about 3000MPa and at temperature from 298 to 573K. Result indicates that at room temperature the vibration modes, assigned to the symmetric and asymmetric stretching of CH3 and CH2 stretching, shift to higher frequency and display a pressure dependent quasi-linear curve. A liquid-solid phase transition appears at a pressure of 150 MPa. The high temperature solidus line of n-pentadecane follows a quadratic function of P = 0.02369T^2 - 9.117T ＋ 725.58, in agreement with previous conclusion derived from studies of other hydrocarbons. Upon phase transition, fitting the experimental data obtained in a temperature range of 283 553 K to the Clausius-Clapeyron equation allows one to define the thermodynamic parameters of n-pentadecane of dP/dT = 0.04738T - 9.117.     

Application of SH surface acoustic waves for measuring the viscosity of liquids in function of pressure and temperature

Viscosity measurements were carried out on triolein at pressures from atmospheric up to 650 MPa and in the temperature range from 10 °C to 40 °C using ultrasonic measuring setup. Bleustein–Gulyaev SH surface acoustic waves waveguides were used as viscosity sensors. Additionally, pressure changes occurring during phase transition have been measured over the same temperature range. Application of ultrasonic SH surface acoustic waves in the liquid viscosity measurements at high pressure has many advantages. It enables viscosity measurement during phase transitions and in the high-pressure range where the classical viscosity measurement methods cannot operate. Measurements of phase transition kinetics and viscosity of liquids at high pressures and various temperatures (isotherms) is a novelty. The knowledge of changes in viscosity in function of pressure and temperature can help to obtain a deeper insight into thermodynamic properties of liquids.     

Pressure dependence of dielectric properties of the LiNaGe4O9 ferroelectric

Dielectric properties of lithium–sodium–tetragermanate (LNG) LiNaGe₄O₉ crystal were investigated under hydrostatic pressure. The phase diagram and phase transition temperature as a function of pressure was constructed. Up to 200 MPa the dependence of T_C on pressure is linear with negative slope of 8.5 K/GPa. The influence of pressure on the Curie–Weiss law was observed. It was also shown that with increasing pressure the maximum value of the electric permittivity and Curie–Weiss constant are decreasing. The obtained results revealed complex mechanism of phase transition in the ferroelectric LNG.