Ab-initio density functional theory study of a WO3 NHa-sensing mechanism

WO3 bulk and various surfaces are studied by an ab-initio density functional theory technique. The band structures and electronic density states of WO3 bulk are investigated. The surface energies of different WO3 surfaces are compared and then the （002） surface with minimum energy is computed for its NH3 sensing mechanism which explains the results in the experiments. Three adsorption sites are considered. According to the comparisons of the energy and the charge change between before and after adsorption in the optimal adsorption site Olc, the NH3 sensing mechanism is obtained.     

Effects of Contact Atomic Structure on Electronic Transport in Molecular Junction

Based on nonequilibrium Green＇s function and first-principles calculations, we investigate the change in molecular conductance caused by different adsorption sites with the presence of additional Au atom around the metal- molecule contact in the system that benzene sandwiched between two Au（111） leads. The motivation is the variable situations that may arise in break junction experiments. Numerical results show that the enhancement of conductance induced by the presence of additional Au is dependent on the adsorption sites of anchoring atom. When molecule is located on top site with the presence of additional Au atoms, it can increase molecular conductance remarkably and present negative differential resistance under applied bias which cannot be found in bridge and hollow sites. Furthermore, the effects of different distance between additional Au and sulfur atoms in these three adsorption sites are also discussed.     

Ab-initio density functional theory study of a WO3 NH3-sensing mechanism

WO 3 bulk and various surfaces are studied by an ab-initio density functional theory technique.The band structures and electronic density states of WO 3 bulk are investigated.The surface energies of different WO 3 surfaces are compared and then the (002) surface with minimum energy is computed for its NH 3 sensing mechanism which explains the results in the experiments.Three adsorption sites are considered.According to the comparisons of the energy and the charge change between before and after adsorption in the optimal adsorption site O 1c,the NH 3 sensing mechanism is obtained.     

First-principles study on anatase TiO2（101） surface adsorption of NO

In this paper, the stable structure and the electronic and optical properties of nitric oxide （NO） adsorption on the anatase TiO2 （101） surface are studied using the plane-wave ultrasoft pseudopotential method, which is based on the density functional theory. NO adsorption on the surface is weak when the outermost layer terminates on twofold coordinated oxygen atoms, but it is remarkably enhanced on the surface containing O vacancy defects. The higher the concentration of oxygen vacancy defects, the stronger the adsorption is. The adsorption energies are 3.4528 eV （N end adsorption）, 2.6770 eV （O end adsorption）, and 4.1437 eV （horizontal adsorption）. The adsorption process is exothermic, resulting in a more stable adsorption structure. Furthermore, O vacancy defects on the TiO2 （101） surface significantly contribute to the absorption of visible light in a relatively low-energy region. A new absorption peak in the low-energy region, corresponding to an energy of 0.9 eV, is observed. However, the TiO2 （101） surface structure exhibits weak absorption in the low-energy region of visible light after NO adsorption.     

Simulating electron momentum spectra of iso-C2H2Cl2： A study of the core electronic structure

Electron momentum spectroscopy(EMS) has been used for the first time to study core electronic structure of isoC2H2Cl2. In the present work, the pronounced difference between ionization energies of two C1 score orbitals(2A1 and 3A1) is seen as a chemical shift of 3 eV, which is due to different chemical environments of the related carbon atoms. Both the calculated spherically averaged core electron momentum distributions(MDs) and three-dimensional electron momentum density maps show that these core molecular orbitals(MOs) 2A1and 3A1 exhibit strong atomic orbital characteristics in real and momentum space. However, the core states 2B2 and 4A1, which are almost degenerate and related to two equivalent atoms, exhibit notable differences between the momentum and position depictions. In contrast to the position space, the momentum density maps of these two core MOs highlight the interference effects which are due to the nuclear positions. The 2B2 orbital of iso-C2H2Cl2 is the antisymmetric counterpart of the 4A1 core orbital in real space. However, it relates to the 4A1 orbital by an exchange of maxima and minima in momentum space. Due to interference effects between electrons scattered from different atomic centers, modulations with a periodicity of 1.12 a.u. can be seen in the computed momentum densities, which tend to decay with increasing electron momenta. Accordingly, the EMS can not only effectively image the electronic structure of compounds by studying valence orbitals, but also provides direct information on the nature of the nuclear geometry by investigating the core states.     

First principles calculations of relationship between the Cu surface states and relaxations

In this paper the relationship between the surface relaxations and the electron density distributions of surface states of Cu(100), Cu(110), and Cu(111) surfaces is obtained by first-principles calculations. The calculations indicate that relaxations mainly occur in the layers at which the surface states electrons are localized, and the magnitudes of the multilayer relaxations correspond to the difference of electron density of surface states between adjacent layers. The larger the interlayer relaxation is, the larger the difference of electron density of surface states between two layers is.     

Chemisorption of Au on Si（001） surface

The chemisorption of one monolayer of Au atoms on an ideal Si(001) surface is studied by using the self-consistent tight binding linear muffin-tin orbital method. Energies of the adsorption system of a Au atom on different sites are calculated. It is found that the most stable position is A site (top site) for the adsorbed Au atoms above the Si(001) surface. It is possible for the adsorbed Au atoms to sit below the Si(001) surface at the B_1 site(bridge site), resulting in a Au－Si mixed layer. This is in agreement with the experiment results. The layer projected density of states is calculated and compared with that of the clean surface. The charge transfer is also investigated.     

Dissociative Chemisorption of an H2（v,j） Molecule on Rigid Ni （100） Surface： Dependence on Surface Topologies and Initial Rovibrational States of the Molecules

The H2(v,j) Ni(100) collision system has been studied to understand the effects of the surface sites and initial rovibrational states of the molecule on molecule-surface interactions, by a quasiclassical molecular dynamic simulation method. Dissociative adsorption of an H2 molecule on the rigid Ni(100) surface is investigated at topologically different three sites of the surface. Interaction between the molecule and Ni surface was described by a London-Eyring-Polani-Sato (LEPS) potential. Dissociative chemisorption probabilities of the H2(v, j) molecule on various sites of the surface are presented as a function of the translation energies between 0.001-1.0eV. The probabilities obtained at each collision site have unique behaviour. At lower collision energies, indirect processes enhance the reactivity, effects of the rotational excitations and impact sites on the reactivity are more pronounced. The results are compared with the available studies. The physical mechanisms underlying the results and quantum effects are discussed.     

Initial Processes of Hydrogen Adsorption on Si（100） Surface

The adsorption of one monolayer H atoms on an ideal Si(100) surface is studied by using the self-consistent tight binding linear muffin-tin orbital method. Energies of adsorption systems of H atoms on different sites are calculated.It is found that the adsorbed H atoms are more favorable on B1 site (bridge site) with a distance 0.056 nm above the Si surface. There does not exist reaction barrier at the Si surface. The layer projected density states are calculated and compared with those of the clean surface. The charge transfers are also investigated.     

Water adsorption on the Be（0001） surface： from monomer to trimer adsorption

In this paper,the density functional theory has been used to perform a comparative theoretical study of water monomer,dimer,trimer,and bilayer adsorptions on the Be(0001) surface.In our calculations,the adsorbed water molecules are energetically favoured adsorbed on the atop sites,and the dimer adsorption is found to be the most stable with a peak adsorption energy of ～ 437 meV.Further analyses have revealed that the essential bonding interaction between the water monomer and the metal substrate is the hybridization of the water 3a 1-like molecular orbital with the (s,p z) orbitals of the surface beryllium atoms.While in the case of the water dimer adsorption,the 1b 1-like orbital of the H2O molecule plays a dominant role.     

Initial Processes of Sulfur Adsorption on Si（100） Surface

The adsorption of one monolayer S atoms on ideal Si（100） surface is studied by using the self-consistent tight binding linear muffon-tin orbital method. Energies of adsorption systems ors atoms on different sites are calculated. It is found that the adsorbed S atoms are more favorable on B1 site （bridge site） with a distance 0.131 nm above the Si surface. The .S, Si mixed layer might exist at S/Si（100） interface. The layer projected density of states are calculated and compared with that of the clean surface. The charge transfers are also investigated.     

A Density Functional Study of Atomic Carbon Adsorption on δ-Pu（111） Surface

Adsorption of atomic carbon on 6-Pu（111） surface is investigated systematically using density functional theory with RPBE functional. The adsorption energies, adsorption structures, Mulliken population, work functions, layer and projected density of states are calculated in wide ranges of coverage, which have never been studied before as far as we know. It is found that the hcp-hollow sites is the energetically favorable site for all the coverage range considered. The repulsive interaction is identified, and the adsorption energy decreases with the coverage, while work function increases linearly with the coverage. It is found that the C-Pu interaction is very strong due to the hybridization between the C 2p states and the Pu 5 f , Pu 6p,Pu 6d states of topmost layer Plutonium atoms.     

Ar adsorptions on Al （111） and Ir （111） surfaces： a first-principles study

We investigate the adsorptions of Ar on Al (111) and Ir (111) surfaces at the four high symmetry sites,i.e.,top,bridge,fcc-and hcp-hollow sites at the coverage of 0.25 monolayer (ML) using the density functional theory within the generalized gradient approximation of Perdew,Burke and Ernzerhof functions.The geometric structures,the binding energies,the electronic properties of argon atoms adsorbed on Al (111) and Ir (111) surfaces,the difference in electron density between on the Al (111) surface and on the Ir (111) surface and the total density of states are calculated.Our studies indicate that the most stable adsorption site of Ar on the Al (111) surface is found to be the fcc-hollow site for the (2 × 2) structure.The corresponding binding energy of an argon atom at this site is 0.538 eV/Ar atom at a coverage of 0.25 ML.For the Ar adsorption on Ir (111) surface at the same coverage,the most favourable site is the hcp-hollow site,with a corresponding binding energy of 0.493 eV.The total density of states (TDOS) is analysed for Ar adsorption on Al (111) surface and it is concluded that the adsorption behaviour is dominated by the interaction between 3s,3p orbits of Ar atom and the 3p orbit of the base Al metal and the formation of sp hybrid orbital.For Ar adsorption on Ir (111) surface,the conclusion is that the main interaction in the process of Ar adsorption on Ir (111) surface comes from the 3s and 3p orbits of argon atom and 5d orbit of Ir atom.     

K_2S-activated carbons developed from coal and their methane adsorption behaviors

The main purpose of this work is to prepare various activated carbons by K2S activation of coal with size fractions of 60-80 meshes, and investigate the microporosity development and corresponding methane storage capacities. Raw coal is mixed with K2S powder, and then heated at 750 ℃-900 ℃ for 30 min-150 min in N2 atmosphere to produce the adsorbents. The texture and surface morphology are characterized by a N2 adsorption/desorption isotherm at 77 K and scanning electron microscopy （SEM）. The chemical properties of carbons are confirmed by ultimate analysis. The crystal structure and degree of graphitization are tested by X-ray diffraction and Raman spectra. The relationship between sulfur content and the specific surface area of the adsorbents is also determined. K2S activation is helps to bring about better development of pore texture. These adsorbents are microporous materials with textural parameters increasing in a range of specific surface area 72.27 m2/g-657.7 m2/g and micropore volume 0.035 cm3/g-0.334 cm3/g. The ability of activated carbons to adsorb methane is measured at 298 K and at pressures up to 5.0 MPa by a volumetric method. The Langmuir model fits the experimental data well. It is concluded that the high specific surface area and micropore volume of activated carbons do determine methane adsorption capacity. The adsorbents obtained at 800 ℃ for 90 min with K2S/raw coal mass ratios of 1.0 and 1.2 show the highest methane adsorption capacities amounting to 106.98 mg/g and 106.17 mg/g, respectively.     

First-principle study of Mg adsorption on Si（111） surfaces

We have carried out first-principle calculations of Mg adsorption on Si(111) surfaces. Different adsorption sites and coverage effects have been considered. We found that the threefold hollow adsorption is energy-favoured in each coverage considered, while for the clean Si(111) surface of metallic feature, we found that 0.25 and 0.5 ML Mg adsorption leads to a semiconducting surface. The results for the electronic behaviour suggest a polarized covalent bonding between the Mg adatom and Si(111) surface.     

Co-adsorption of O_2 and H_2O on α-uranium(110) surface:A density functional theory study

First-principles calculations based on density functional theory corrected by Hubbard parameter U(DFT+U) are applied to the study on the co-adsorption of O2 and H_2O molecules to α-U(110) surface. The calculation results show that DFT+U method with Ueff= 1.5 e V can yield the experimental results of lattice constant and elastic modulus of α-uranium bulk well. Of all 7 low index surfaces of α-uranium, the(001) surface is the most stable with lowest surface energy while the(110) surface possesses the strongest activity with the highest surface energy. The adsorptions of O_2 and H_2O molecules are investigated separated. The O_2 dissociates spontaneously in all initial configurations. For the adsorption of H_2O molecule,both molecular and dissociative adsorptionsoccur. Through calculations of co-adsorption, it can be confirmed that the inhibition effect of O_2 on the corrosion of uranium by water vapor originates from the preferential adsorption mechanism,while the consumption of H atoms by O atoms exerted little influence on the corrosion of uranium.     

A first-principles study of the magnetic properties in boron-doped ZnO

First-principles calculations based on density functional theory are performed to study the origin of ferromagnetism in boron-doped ZnO. It is found that boron atoms tend to reside at Zn sites. The induced Zn vacancy is a key factor for ferromagnetism in Zn1-xBxO (0相似文献   

Tunable Adsorption and Desorption of Hydrogen Atoms on Single-Walled Carbon Nanotubes

Chemical adsorption and desorption of hydrogen atoms on single-walled carbon nanotubes(SWNTs) are investigated by using molecular dynamics simulations.It is found that the adsorption and desorption energy of hydrogen atoms depend on the hydrogen coverage and the diameter of the SWNTs.Hydrogen-adsorption geometry at the coverage of 1.0 is more energetically stable.The adsorption energy decreases with the increasing diameter of the armchair tubes.The adsorption and desorption energy of hydrogen atoms can be modified reversibly by externally radial deformation.The averaged C-H bond energy on the high curvature sites of the deformed tube increases with increasing radial deformation,while that on the low curvature sites decreases.     

Research of the behaviour of O chemisorption on the (110) surface of Rhx--Pt1－x alloy

An atomic group model of the disordered binary alloy Rhx-Pt1-x has been constructed to investigate surface segregation. According to the model, we have calculated the electronic structure of the Rhx-Pt1-x alloy surface by using the recursion method when O atoms are adsorbed on the Rhx-Pt1-x （110） surface under the condition of coverage 0.5. The calculation results indicate that the chemical adsorption of O changes greatly the density of states near the Fermi level, and the surface segregation exhibits a reversal behaviour. In addition, when x 〈 0.3, the surface on which O is adsorbed displays the property of Pt; whereas when x 〉 0.3 it displays the property of Rh.     

A b initio calculation of the growth of Te nanorods and Bi2Te3 nanoplatelets

In this paper the growth mechanism of a Te/Bi2Te3 novel structure is studied by ab-initio calculations. The results show that the growth of Te nanorods is determined by the adsorption energy of Te atoms on different crystalline Te surfaces. The adsorption energy of Te on the Te （001） surface is 3.29 eV, which is about 0.25 eV higher than that of Te on the Te （110）. This energy difference makes the preferential growth direction along the 〈 001 〉 direction. In addition, the higher surface energy of Bi2Te3 （110） and the lattice misfit between crystalline Bi2We3 and Te along 〈 001 〉 direction are considered to explain the growth of the Bi2Te3 nanoplatelets, in which Volmer-Weber model is used. The theoretical results are in agreement with experimental observation.