酞菁铜薄膜的光记录特性

研究了有机染料酞菁铜（ＣｕＰｃ）真空蒸镀薄膜在可见及近红外区域的吸收光谱和光学常数，发现酞菁铜薄膜在５５０－７５０ｎｍ波长范围内具有较强的吸收，在静态测试仪上测试了酞菁铜薄膜的光存储记录特性，发现用低功率氦氖激光照样品时薄膜反射率变化较大，在酞菁记录层上覆盖金属反射层将提高写入激光的阈值能量并且增大反射率的对比度。     

偶氮染料掺杂高分子薄膜的光谱和光存储性质研究

利用旋涂法,制备了以二乙基胺基〖Ｎ（ＣＨ２ＣＨ３）２〗作为推电子基因、以具有强电负性的羧基（ＣＯＯＨ）作为拉电子基团的推－拉型偶氮染料掺杂的高分子（ＰＭＭＡ）薄膜。在室温下测试了该偶氮染料在溶液和薄膜态的吸收光谱、薄膜态的反射光谱和透过光,发现该薄膜在４００～５５０ｎｍ波长范围内具有强的吸收。在５１４．５ｎｍ光盘静脉测试仪上测试了膜片的静脉光存储性能,结果表明,用低功率Ａｒ＾＋激光（５１４．５ｎ     

GeSg2Te4相变光存储薄膜材料的短波长静态记录特性的研究

研究了单层ＧｅＳｂ２Ｔｅ４真空射频溅射薄膜在４００ｎｍ－８３０ｎｍ区域的吸收，反射光谱和光学常数，发现ＧｅＳｂ２Ｔｅ４薄膜在４００ｎｍ－６００ｎｍ波长范围内具有较强的吸收。在短波长静态测试仪上测试了ＧｅＳｂ２Ｔｅ４薄膜的光存储记录特性，发现在５１４．５ｎｍ波长用较低功率的激光辐照样品时薄膜在写入前后的反射率变化较大，擦除前后的发射率对比度较低，可通过膜层设计来提高。     

溴代酞菁铜衍生物薄膜的折射率和吸收特性

通过旋涂法在单晶硅片上制备了一系列含有不同数目溴取代基的酞菁铜衍生物：一溴代－四烷氧基酞菁铜（MBTAPcCu），二溴代－四烷氧基酞菁铜（DBTAPcCu），四溴代－四烷氧基酞菁岣（TBTAPcCu）和无溴代－四烷氧基酞菁铜（NBTAPcCu）薄膜，利用同步旋转起偏－检偏器（RAP）型的宽谱扫描全自动椭圆偏振光谱仪测定了上述薄膜的椭偏光谱，获得了该系列薄膜的复折射率、复介电常数和吸收系数，研究了溴取代基对酞菁铜衍生物薄膜光学性质的影响。     

GeSb_2Te_4相变光存储薄膜材料的短波长静态记录特性的研究

研究了单层ＧｅＳｂ２Ｔｅ４真空射频溅射薄膜在４００ｎｍ～８３０ｎｍ区域的吸收、反射光谱和光学常数（ｎ，ｋ），发现ＧｅＳｂ２Ｔｅ４薄膜在４００ｎｍ～６００ｎｍ波长范围内具有较强的吸收。在短波长静态测试仪上测试了ＧｅＳｂ２Ｔｅ４薄膜的光存储记录特性，发现在５１４．５ｎｍ波长用较低功率的激光辐照样品时薄膜在写入前后的反射率变化较大，擦除前后的反射率对比度较低，可通过膜层设计来提高     

吡咯俘精酸酐的图像光存储特性

对一种新型可用于可擦重写光存储的有机光致变色材料——吡咯俘精酸酐，测定了它的光致变色双稳态吸收光谱，呈色态的吸收峰在635nm，无色态的吸收峰在385nm。利用其双稳态特性，在吡咯俘精酸酐／PMMA薄膜上实现了图像光存储。所存储的图像对比度高，用普通相机在自然光下即可直接读出。在膜上存储的图像在室温下暗处保存6个月未见消退，估计此条件下保存期可以年计。     

一种菁染料—聚合物薄膜的光存存储性能

用旋涂法制备了一种菁染料－聚合物薄膜，并研究了该染料－聚合物薄膜的光谱性质和光存储性能，该染料薄膜在６６０～８３０ｎｍ波段有较强的吸收和２０％以上的反射率，在最佳实验条件下，获得了５８ｄＢ的信噪比，信噪比（ＣＮＲ）载波信号强度（Ｃ）和薄膜反射率变化（△Ｒ）的对数（ｌｇ△Ｒ）在正比。     

Sb掺和对TeO_x薄膜光学和静态记录特性的影响

以真空蒸镀法在 K9玻璃基底上制备了 Te Ox∶ Sb单层薄膜 ,对薄膜的结构、光学和静态记录特性进行了研究 .结果表明 ,Sb掺和后 Te Ox 薄膜的结构、反射光谱和光学常量均发生了明显变化 .Te Ox∶Sb薄膜具有良好的写入灵敏性并具有了一定的可擦除性能 ,该类薄膜有望作为可擦除光存储介质     

一种菁染料－聚合物薄膜的光存存储性能

用旋涂法制备了一种菁染料－聚合物薄膜，并研究了该染料－聚合物薄膜的光谱性质和光存储性能。该染料薄膜在６６０～８３０ｎｍ波段有较强的吸收和２０％以上的反射率。在最佳实验条件下，获得了５８ｄＢ的信噪比。信噪比（ＣＮＲ）、载波信号强度（Ｃ）和薄膜反射率变化（ΔＲ）的对数（ｌｇΔＲ）成正比     

亚酞菁薄膜的折射率和吸收特性

通过真空镀膜法在单晶硅片上制备了一种新的严酞菁（三硝基溴硼亚酞菁）薄膜,利用全自动椭圆偏振光谱仪研究了该薄膜的椭偏光谱,测量了其复折射率,复介电常数和吸收系数,估算了薄膜在窗口区域的俘获能级并对其吸收谱的成因作了分析。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.