选择性p型量子阱垒层掺杂在双波长发光二极管光谱调控中的作用

采用软件理论分析的方法对选择性p型掺杂量子阱垒层在InGaN双波长发光 二极管(LED)中的光谱调控作用进行模拟分析.分析结果表明, 选择性p型掺杂对量子阱中电子和空穴浓度分布的均衡性起到一定的调控作用, 在适当选择p型掺杂量子阱垒层层数的条件下,能够改善量子阱中载流子的 辐射复合速率, 降低溢出电子浓度,从而有效提高芯片内量子效率,并减缓内量子效率随驱动 电流增大而快速下降的趋势.随着活性层量子阱增加到特定数量, 选择性p型掺杂的调控效果更加明显, LED芯片的双波长发光峰强度达到基本均衡.     

不同量子阱宽度的InP基In0.53GaAs/In0.52AlAs高电子迁移率晶体管材料二维电子气的性能研究

用Shubnikov-de Haas(SdH)振荡效应，研究了在1.4 K下不同量子阱宽度(10—35 nm)的InP基高电子迁移率晶体管材料的二维电子气特性.通过对纵向电阻SdH振荡的快速傅里叶变换分析，得到不同阱宽时量子阱中二维电子气各子带电子浓度和量子迁移率.研究发现，在Si掺杂浓度一定时，阱宽的改变对于量子阱中总的载流子浓度改变不大，但是随着阱宽的增加，阱中的电子从占据一个子带到占据两个子带，且第二子带上的载流子迁移率远大于第一子带迁移率.当量子阱宽度为20 nm时，处在第二子能级上的电子数与处在 关键词： 量子阱宽 二维电子气 Shubnikov-de Haas振荡 高电子迁移率晶体管     

高灵敏度InAs/AlSb量子阱的霍尔器件(英文)

用分子束外延在Ga As(001)衬底上生长了两个量子阱结构的霍尔器件,一个是没有掺杂的量子阱结构,一个是Si-δ掺杂的量子阱结构。研究了霍尔器件的面电子浓度和电子迁移率与温度的关系。结果表明,在300 K下,Si-δ掺杂的量子阱结构的电子迁移率高达25 000 cm~2·V~(-1)·s~(-1),并且该器件输入电阻和输出电阻较低。同时,Si-δ掺杂的量子阱结构霍尔器件的敏感度好于没有掺杂的量子阱结构霍尔器件。     

920nm光抽运垂直外腔面发射半导体激光器结构设计(英文)

设计并优化了一种用808nm的大功率激光二极管为抽运光源,In0.09Ga0.91As量子阱结构为增益介质的920nm光抽运半导体垂直外腔面发射激光器。运用有限元方法,对激光器的电特性方程和光特性方程求自洽解,计算了器件各种特性参量。分析了单个周期内不同阱的个数(1,2和3)、不同阱深、不同垒宽、不同非吸收层组分、不同非吸收层尺寸条件下,器件性能的改变,特别是模式、阈值和光-光转换效率的改变,从而选择一个最佳的结构。     

应力导致InAs/In0.15Ga0.85As量子点结构中 In0.15Ga0.85As阱层的合金分解效应研究

利用固源分子束外延技术,在In0.15Ga0.85As/GaAs量子阱生长了两个InAs/In0.15Ga0.85As量子点(DWELL)样品.通过改变其中一个InAs DWELL样品中的In0.15Ga0.85As阱层的厚度和生长温度,获得了量子点尺寸增大而且尺寸分布更均匀的结果.结合光致发光光谱(PL)和压电调制光谱(PzR)实验结果,发现该样品量子点的光学性质也同时得到了极大的优化.基于有效质量近似的数值计算结果表明:量子点后生长过程中应力导致In0.15Ga0.85As阱层合金分解机理是导致量子点尺寸和光学性质得到优化的主要原因.     

MBE和MOCVD生长的AIGaAs/GaAs GRIN—SCH SQW激光器深中心的比较

应用深能级瞬态谱(DLTS)技术详细研究分子束外延(MBE)和金属有机物化学汽相淀积(MOCVD)生长的AlGaAs/GaAs graded index sparate confinement beterostruc-ture single quantum well(GRIN-SCH SQW)激光器的深中心.结果表明,在激光器的n-ALGaAs层里除众所周知的DX中心外,还存在着较大浓度和俘获截面的深(电子或空穴) 陷阱,它们直接影响着激光器的性能.其中MBE生长的激光器里的深空穴陷阱H1可能分布在x_(A1)=0.22→0.43和x (A1)=0.43的n-AlGaAs层里x_(A1)值不连续的界面附近,而深电子陷阱E3则可能分布在x_(A1)=0.43的n-AlGaAs层里x_(A1)值不连续的界面附近.MOCVD生长的激光器量子阱的AlGaAs层存在着DX中心和深电子陷阱.其中深电子陷阱E3可能分布在x_(A1)=0.22→0.30和x_(A1)=0.30的n-AlGaAs层里,而DX中心则分布在x_(A1)(x_(A1)=0.22→0.30和x_(A1)=0.30)值不连续的n-AlGaAs层界面附近.     

纤锌矿In_(0.19)Ga_(0.81)N/GaN量子阱中光学声子和内建电场对束缚极化子结合能的影响

用改进的Lee-Low-Pines变分方法研究纤锌矿In0.19Ga0.81N/GaN量子阱结构中束缚极化子能量和结合能等问题,给出基态结合能、不同支长波光学声子对能量和结合能的贡献随阱宽和杂质中心位置变化的数值结果.在数值计算中包括了该体系中声子频率的各向异性和内建电场对能量和结合能的影响、以及电子和杂质中心与长波光学声子的相互作用.研究结果表明,In0.19Ga0.81N/GaN量子阱材料中光学声子和内建电场对束缚极化子能量和结合能的贡献很大,它们都引起能量和结合能降低.结合能随着阱宽的增大而单调减小,窄阱中减小的速度快,而宽阱中减小的速度慢.不同支声子对能量和结合能的贡献随着阱宽的变化规律不同.没有内建电场时,窄阱中,定域声子贡献小于界面和半空间声子贡献,而宽阱中,定域声子贡献大于界面和半空间声子贡献.有内建电场时,定域声子贡献变小,而界面和半空间声子贡献变大,声子总贡献也有明显变化.在In0.19Ga0.81N/GaN量子阱中,光学声子对束缚极化子能量和结合能的贡献比GaAs/Al0.19Ga0.81As量子阱中的相应贡献(约3.2—1.8和1.6—0.3 meV)约大一个数量级.阱宽(d=8 nm)不变时,在In0.19Ga0.81N/GaN量子阱中结合能随着杂质中心位置Z0的变大而减小,并减小的速度变快.随着Z0的增大,界面和半空间光学声子对结合能的贡献缓慢减小,而定域光学声子的贡献缓慢增大.     

Si掺杂对AlGaInP/GaInP多量子阱性能的影响

采用LP-MOCVD技术在n-GaAs衬底上生长了AlGaInP／GaInP多量子阱红光LED外延片。以X射线双晶衍射技术和光致发光技术对外延片进行了表征,研究了Si掺杂对AlGaInP／GaInP多量子阱性能的影响。研究表明：掺Si能大大提高(Al0．3Ga0.7)0.5In0.5P／Ga0.5In0.5P多量子阱的发光强度。相对于未故意掺杂的样品,多量子阱垒层掺Si使多量子阱的发光强度提高了13倍,阱层和垒层均掺Si使多量子阱的发光强度提高了28倍。外延片的X射线双晶衍射测试表明,Si掺杂并没有使多量子阱的界面质量变差。     

量子阱垒层掺杂变化对双波长LED调控作用研究

采用APSYS软件研究了InGaN/GaN量子阱垒层掺杂变化对双波长 发光二极管发光光谱的调控问题. 在不同掺杂类型和浓度下对器件电子空穴浓度分布、 载流子复合速率、 能带结构、 发光光谱进行分析, 结果表明, 调节量子阱垒层n型和p型的掺杂浓度可以精确而有效地根据需要调控发光光谱, 解决发光光谱调控难的问题. 这些现象归因于掺杂的量子阱垒层对电子空穴分布的调控作用.     

高In组分InGaNAs/GaAs量子阱的生长及发光特性

采用分子束外延技术(MBE)在Ga As衬底上外延生长高In组分(40%)In Ga NAs/Ga As量子阱材料,工作波长覆盖1.3~1.55μm光纤通信波段。利用室温光致发光(PL)光谱研究了N原子并入的生长机制和In Ga NAs/Ga As量子阱的生长特性。结果表明:N组分增加会引入大量非辐射复合中心;随着生长温度从480℃升高到580℃,N摩尔分数从2%迅速下降到0.2%;N并入组分几乎不受In组分和As压的影响,黏附系数接近1;生长温度在410℃、Ⅴ/Ⅲ束流比在25左右时,In_(0.4)Ga_(0.6)N_(0.01)As_(0.99)/Ga As量子阱PL发光强度最大,缺陷和位错最少;高生长速率可以获得较短的表面迁移长度和较好的晶体质量。     

The influence of intrisic defects on the degradation and luminescence of GaAs and other III–V compounds

A significant contribution to the degradation of GaAs-based lasers and light-emitting diodes arises from the formation of so-called dark line defects. It is shown that these defects are accumulations of non-radiative recombination centres around dislocations. The centres are identified as As vacancies, which are emitted by climbing dislocations, concomitantly with the absorption of Ga interstitials. From scanning deep-level transient spectroscopy observations it is concluded that the so-called DX centres are Ga interstitials. The driving force for dislocation climb and thus for dark-line-defect formation is a supersaturation of Ga interstitials originating from the growth of the GaAs crystals under Ga-rich conditions as a consequence of the high volatility of As. Phenomena in other III–V compound semiconductors related to the formation of dark line defects in GaAs are also discussed.     

Noise reduction in sputtered W/GaAs Schottky junctions

The noise characteristics of sputtered W/GaAs Schottky diodes, annealed at temperatures up to 700°C, have been investigated. A useful figure of merit for such millimeter and submillimeter mixer diodes is the noise performance at an RF where accurate measurements are available. Noise temperatures measured at a typical mixer intermediate frequency of 4GHz under DC biased conditions have been reduced significantly by rapid thermal annealing. The best noise data have been obtained with an annealing time of 2 minutes at 600°C and are consistent with good mixer performance.     

Static thermal properties of broad-contact double-heterostructure laser diodes

The thermal properties of broad-contact double-heterostructure GaAs-(AlGa)As laser diodes under steady-state conditions are presented in this paper. The nonhomogeneous, layered structure of the laser diode has been reduced to the thermally equivalent, homogeneous GaAs structure. The active layer heating due to nonradiative recombination and reabsorption of radiation, the radiative transfer of spontaneous radiation through the wide-gap passive layers, and Joule heating have been taken into consideration. The temperature dependence of the GaAs thermal conductivity(T) has been also taken into account. The relative influence on the temperature distributions of the individual heat sources, the internal quantum efficiency of the spontaneous emission, and the thickness and the resistivities of the individual layers have been discussed. The model may be used for all broad-contact laser diodes including the high-power large-optical-cavity laser diodes.     

AlGaAs∶Sn中DX中心电子俘获势垒的精细结构

采用定电容电压法,测量了n型Al026Ga074As∶Sn中DX中心电子热俘获瞬态,以及不同俘获时间后的电子热发射瞬态;并对瞬态数据进行数值Laplace变换,得到其Laplace缺陷谱(LDS).通过分析LDS谱,确定了电子热俘获和热发射LDS谱之间的对应关系,从而得到热俘获系数对温度依赖关系,以及与Sn相关的DX中心部分电子热俘获势垒的精细结构;通过第一原理赝势法计算表明,Sn附近的AlGa原子的不同配置是电子热俘获势垒精细结构产生的主要原因     

Effects of rapid thermal annealing on the optical properties of InAs/(In)GaAs quantum dots with different areal density

The effects of rapid thermal annealing on the optical properties of InAs/(In)GaAs quantum dots (QDs) with different areal density were investigated by photoluminescence (PL) measurement. The annealing results in PL peak energy blue-shift which strongly depends on QD areal density and capping layer. It is noticeable that low-density QDs and/or InGaAs-capped QDs are more sensitive to the annealing. We attribute the larger energy blue-shift from these samples to enhanced strain-driven diffusion and/or defect-assisted diffusion.     

Tunneling and injection in ferromagnetic structures InGaAs/GaAs/(Ga,Mn)As and InGaAs/<Emphasis Type="Italic">n</Emphasis> <Superscript>+</Superscript>-GaAs/(Ga,Mn)As

The spin light-emitting diodes based on InGaAs/GaAs heterostructures with a quantum well and an injector in the form of a (Ga,Mn)As ferromagnetic layer have been studied. It has been demonstrated that the efficiency of electron spin injection in the structure with a (Ga,Mn)As/n⁺-GaAs tunneling barrier can be controlled by varying the parameters of n⁺-GaAs. The spin injection control mechanisms associated with the thermal activation and tunneling of carriers have been discussed.     

Dynamical thermal properties of broad-contact double-heterostructure GaAs-(AIGa)As laser diodes

The dynamical thermal properties of broad-contact double-heterostructure GaAs — (AIGa)As laser diodes are presented in this paper. For short current pulses (t ? 0.5μs), the nonlinear, time-dependent thermal conduction equation has been reduced to a linear one by means of a space transformation. The transformation has substituted the nonhomogeneous GaAs — (AIGa)As structure by the homogeneous GaAs one. Except for active layer heating due to nonradiative recombination and partial reabsorption of radiation, the radiative transfer of the spontaneous radiation through the wide-gap passive layers and the Joule heating effect have been taken into account. The model may be used to some extent for high-power stripe-geometry laser diodes with a relatively wide stripe active region.     

Enhancement of Photoluminescence Intensity of GaInNAs/GaAs Quantum Wells by Two-Step Rapid Thermal Annealing

We investigate the effect of rapid thermal annealing on InGaNAs/GaAs quantum wells. At optimized annealing temperatures and times, the greatest enhancement of the photoluminescence intensity is obtained by a special two-step annealing process. To identify the mechanism affecting the material quality during the rapid thermal annealing, differential temperature analysis is applied, and temperature- and power-dependent photoluminescence is carried out on the samples annealed under different conditions. Our experiment reveals that some composition redistribution or other related ordering processes may occur in the quantum-well layer during annealing. Annealing at a lower temperature for a long time primarily can remove defects and dislocations while annealing at a higher temperature for a short time primarily homogenizes the composition in the quantum wells.     

Inhibition of emission wavelength blueshift in annealed InAs/GaAs quantum dot stacks: an important observation for their potential application in photovoltaic devices

We have investigated the effect of post growth rapid thermal annealing on self-assembled InAs/GaAs multilayer QDs (MQD) overgrown with a combination barrier of InAlGaAs and GaAs for their possible use in photovoltaic device application. The samples were characterized by transmission electron microscopy and photoluminescence measurements. We noticed a thermally induced material interdiffusion between the QDs and the wetting layer in the MQD sample up to a certain annealing temperature. The QD heterostructure exhibited a thermal stability in the emission peak wavelength on annealing up to 700 ^°C temperature. A phenomenological model has been proposed for this stability of the emission peak. The model considers the effect of the strain field, propagating from the underlying QD layer to the upper layers of the multilayer QD and the effect of indium atom gradient in the combination barrier layer due to the presence of a quaternary InAlGaAs layer.     

Photoluminescence and lasing properties of InAs/GaAs quantum dots grown by metal-organic chemical vapour deposition

Photoluminescence （PL） and lasing properties of InAs/GaAs quantum dots （QDs） with different growth procedures prepared by metalorganic chemical vapour deposition are studied. PL measurements show that the low growth rate QD sample has a larger PL intensity and a narrower PL line width than the high growth rate sample. During rapid thermal annealing, however, the low growth rate sample shows a greater blueshift of PL peak wavelength. This is caused by the larger InAs layer thickness which results from the larger 2-3 dimensional transition critical layer thickness for the QDs in the low-growth-rate sample. A growth technique including growth interruption and in-situ annealing, named indium flush method, is used during the growth of GaAs cap layer, which can flatten the GaAs surface effectively. Though the method results in a blueshift of PL peak wavelength and a broadening of PL line width, it is essential for the fabrication of room temperature working QD lasers.