共查询到20条相似文献,搜索用时 93 毫秒
1.
为了深入理解双包层光纤的光场传输特性,应用耦合模理论将双包层光纤等效为相互耦合的单模光纤和环形芯光纤,研究了圆对称的双包层光纤的光场传输.通过计算单模光纤LP01模和环形芯光纤导模的耦合系数发现了环形芯光纤LP0n模的耦合系数远大于其它导模的耦合系数,且LP0n模中的高阶模比低阶模的耦合系数大.据此,应用耦合模理论计算得到了该双包层光纤的光传输特性,计算结果发现光场沿光纤轴向呈近似周期分布,且纤芯中光功率变化的平均周期随波长递增,但平均归一化功率与光纤参数紧的选择有关. 相似文献
2.
为了深入理解双包层光纤的光场传输特性,应用耦合模理论将双包层光纤等效为相互耦合的单模光纤和环形芯光纤,研究了圆对称的双包层光纤的光场传输.通过计算单模光纤LP01模和环形芯光纤导模的耦合系数发现了环形芯光纤LP0n模的耦合系数远大于其它导模的耦合系数,且LP0n模中的高阶模比低阶模的耦合系数大.据此,应用耦合模理论计算得到了该双包层光纤的光传输特性,计算结果发现光场沿光纤轴向呈近似周期分布,且纤芯中光功率变化的平均周期随波长递增,但平均归一化功率与光纤参数紧的选择有关. 相似文献
3.
双包层掺染料聚合物光纤放大器的增益性能分析 总被引:3,自引:2,他引:1
双包层聚合物光纤放大器可以减小染料的热漂白,使用速率方程的方法,给出了一个能够全面描述双包层掺染料聚合物光纤放大器增益性能的模型,模型既考虑了染料三重态能级对速率方程的影响,又考虑了双包层结构对泵浦光的影响,可以在稳态的情况下计算放大器的各种增益性能指标. 相似文献
4.
5.
6.
波长无啁啾调谐窄线宽掺Yb3+双包层光纤激光器 总被引:1,自引:0,他引:1
用相位掩模法, 在圆形掺Yb3+双包层光纤上制作了Bragg光纤光栅,并用它作为双包层光纤激光器的输出腔镜, 在光栅反射中心波长1055.2 nm位置得到了窄线宽的激光输出, FWHM为0.271 nm, 信噪比约为40 dB.这种结构的双包层光纤激光器, 在双包层增益光纤和后腔镜间没有连接损耗, 减小了双包层光纤激光器体积. 用自行制作的等强度梁对作为输出腔镜的光纤光栅做双向应力调谐, 实现了激光波长无啁啾调谐输出, 调谐范围1051.1~1060.04nm,调谐量达8.9nm, 调谐过程中激光3 dB线宽基本无变化. 相似文献
7.
利用相位掩模法,在D形内包层掺Yb3+双包层光纤一端直接写制出Bragg光栅,用作双包层光纤激光器的输出腔镜.试验得到了线宽为0.196nm,波长为1058.2nm,最高输出功率为570mW的稳定激光输出,解决了激光器中模式竞争造成的输出不稳定现象.从速率方程出发,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析,结果与实验符合很好.
关键词:
双包层光纤光栅
掺Yb3+双包层光纤激光器
相位掩模
速率方程 相似文献
8.
9.
高功率双包层光纤激光器 总被引:5,自引:0,他引:5
介绍了高功率双包层光纤激光器的结构和工作原理,综述这种新型光纤激光器的主要特点及其在国内外的最新进展状况,展望了双包层光纤激光器的应用前景。 相似文献
10.
计算双包层形状对光纤吸收效率的影响,常用的方法有二维射线法、三维射线法、光纤光学波动耦合理论等。介绍了一种基于Zemax软件计算其吸收效率的三维方法,通过编写ZPL宏计算了圆形、偏心形、矩形、D形、八角形等常规内包层形状对光纤吸收效率的影响,并将分析结果与二维射线法所得结果进行比较,数据表明:本文的计算结果和二维射线法的计算结果类似,各种内包层形状光纤的吸收效率趋势是一样的。它的优点在于本文给出的是吸收效率和光纤长度的关系,更形象直观,而二维射线法给出的是吸收效率和反射次数的关系;在Zemax中可以设置光线的临界角,而二维射线法是假设光线从内包层里任意一点随机发射的,它没有考虑到光线在内包层中发生全反射的条件,本文的计算结果更准确一些;在Zemax里可以构建各种内包层形状,它的非序列光线追迹速度很快,以矩形内包层光纤为例,在同样的条件下利用Zemax用时373 s,利用二维射线法用时1 732 s,所以基于Zemax分析双包层光纤吸收效率的方法计算速度更快。最后用这种方法研究了上海光机所楼祺洪研究员提出的一种新型双包层光纤的吸收效率。 相似文献
11.
12.
13.
本文根据单模光纤模场直径的横向位移定义,提出了一种测量模场直径的新方法——远场高斯掩模匹配法.讨论了几种测量及数据处理方法.最后给出了初步的实验结果. 相似文献
14.
15.
偏心激励聚合物光纤横截面的光功率分布 总被引:4,自引:1,他引:3
研究了偏心激励多模聚合物光纤横截面的光功率分布。用光线追迹法计算了不同的激励源偏心距离和光纤长度时,光纤出射端横截面的光功率分布,并用二维CMOS图像探测器阵列进行了测量。数值计算和实验测量的结果均表明随着激励源偏心距的增加,光功率分布由光纤轴心向外偏移并形成环状;光功率分布在圆周方向的均匀性随着光纤长度的增加而趋于均匀。对中心激励的弯曲光纤光功率分布的测量结果表明,当弯曲曲率半径远大于临界曲率半径时,光功率分布无显著展宽,光功率分布随曲率半径的减小而向曲率外侧偏移;当光纤弯曲半径接近于临界曲率半径时,光功率分布显著展宽。 相似文献
16.
C.S. Sobrinho J.W.M. Menezes W.B. Fraga A.F.G.F. Filho H.H.B. Rocha K.D.A. Sabóia 《Optics Communications》2008,281(5):1056-1064
In this paper we propose the operation of an all-optical logical gate based in a symmetric nonlinear directional coupler (NLDC) operating with a pulse position modulation (PPM). The performance of a symmetric NLDC realizing two-input AND/OR logical functions, which can be applied in transmission and processing of signals in all-optical form in TDM systems, is examined. This integrated symmetric NLDC logical gate operates with two ultrashort soliton light pulses (2 ps), which are modulated in agreement with the technique of pulse position modulation (PPM). Initially, we evaluate the effect resulting of an increment in the PPM coding parameter offset (ε), for the temporal position of the output pulse, considering the anomalous group-velocity dispersion (GVD), nonlinear self phase modulation (SPM) and without loss propagation regime of input pulses, in the cores 1 and 2 of the NLDC. In this situation, we analyze the four possible situations for the two-input logical gate, modulating the 1 and 2 input pulses through temporal displacement and allowing a variation in the coding parameter offset. We can conclude that is possible to get AND/OR logical operations for the cores 1 or 2, without to insert PPM error, since a phase control (Δ?) exists applied in agreement with the logical level of the input pulse in the core 1. Finally we define the truth table, considering the adequate phase difference and coding parameter offset for the stable operation of the AND/OR logical gate based in the symmetric NLDC. 相似文献
17.
A novel method for determining mode power distribution in a two-mode fiber illuminated by an offset beam by measuring the near field pattern on the test fiber endface is developed. This method utilizes the different field symmetries of the fundamental and the second order modes. Coupling efficiencies from a quasi Gaussian beam to the fundamental and the second order modes in a two mode fiber were measured by the new technique for various offset launching conditions, and were in good agreement with the theoretical ones. 相似文献
18.
19.
基于光纤Bragg光栅(FBG)反射复振幅相移对FBG法布里-珀罗腔透射谱的影响,分析了传统耦合模理论计算均匀FBG反射复振幅相移产生误差的原因.引入折射率分布初始相位参数描述FBG折射率分布纵向的微小偏移,用真实的反透射系数代替简明形式的反透射系数,对传统耦合模理论进行了修正,增加了与折射率分布初始相位参数有关而与波长无关的相位因子.在此基础上进一步对计算非均匀FBG的传输矩阵法的相位进行了修正.修正后的快速计算结果用于FBG法布里-珀罗腔透射谱的计算,可反映折射率分布初始相位参数对透射峰波长位置的影响,与Rouard 算法及实验值均有较好的一致性.
关键词:
光纤Bragg 光栅
法布里-珀罗腔
耦合模理论 相似文献
20.
We present simple and accurate analytical expressions for transmission coefficient at the splice for both angular offset and transverse offset in case of single-mode dispersion shifted trapezoidal as well as dispersion flattened graded and step W fibers. Here, we employ the recently developed simple series expression for fundamental modal field for such fibers. The evaluation of the concerned parameters based on our formalism requires very little computations. We show that our estimations match excellently with the exact numerical results in case of the said fibers. Further, splices being highly tolerant with respect to longitudinal separation, we restrict our investigations to the cases of transverse and angular mismatches only. The present study should find application in all optical technology involving said kinds of fiber. 相似文献