排序方式: 共有36条查询结果,搜索用时 15 毫秒
1.
对时间成像理论进行简要研究. 利用电光相位调制器进行光脉冲压缩实验,并分别对基于电光相位调制和交叉相位调制的时间透镜组成的时间成像系统进行了仿真和讨论. 实验结果表明,基于电光相位调制的时间透镜组成的时间成像系统可以有效压缩光脉冲,但是该系统受到了孔径限制,压缩系数较小,分辨率较低. 进一步的仿真分析结果表明,基于交叉相位调制的时间透镜组成的时间成像系统不受孔径限制,能够获得更大的压缩系数和更高的分辨率,但是该系统的实现难度较大.
关键词:
光脉冲压缩
时间透镜
电光相位调制
交叉相位调制 相似文献
2.
基于光纤Bragg光栅(FBG)反射复振幅相移对FBG法布里-珀罗腔透射谱的影响,分析了传统耦合模理论计算均匀FBG反射复振幅相移产生误差的原因.引入折射率分布初始相位参数描述FBG折射率分布纵向的微小偏移,用真实的反透射系数代替简明形式的反透射系数,对传统耦合模理论进行了修正,增加了与折射率分布初始相位参数有关而与波长无关的相位因子.在此基础上进一步对计算非均匀FBG的传输矩阵法的相位进行了修正.修正后的快速计算结果用于FBG法布里-珀罗腔透射谱的计算,可反映折射率分布初始相位参数对透射峰波长位置的影响,与Rouard 算法及实验值均有较好的一致性.
关键词:
光纤Bragg 光栅
法布里-珀罗腔
耦合模理论 相似文献
3.
4.
光纤光栅梳状滤波器及其在新型可选波长激光器中的应用 总被引:4,自引:0,他引:4
对现有在同~段光纤上多次写入光栅制成光栅梳状滤波器的方法进行了改进,利用增加光栅长度,精确控制不同光栅的曝光时间,并结合调整光栅实际写入长度的方法,制成了不均衡度小于5%、最低峰值反射率高于95%的光纤光栅梳状滤波器;同时提出了一种新颖的可选波长光纤激光器结构。采用由上述方法制作出的反射率均衡的光纤光栅梳状滤波器和可调光滤波器结合在一起进行波长选择,实现了波长的快速准确选择,同时各个波长激光的输出特性稳定,功率均衡性好,边模抑制比大于50dB。 相似文献
5.
6.
Temperature or strain induced adjustable-chirp characteristics of uniform fibre grating with tapered metal coating 下载免费PDF全文
Temperature and strain characteristics of uniform fibre grating with tapered metal coatings have been analysed theoretically, by which adjustable chirp characteristics of such gratings are shown. Electroplating is adopted to fabricate such gratings, and the tapered metal coating is obtained by gradually drawing the fibre grating out of the solution during the process of electroplating. The gradually changing cross-sectional area of the metal coating is calculated by a newly suggested numerical method. By combining the theoretical and numerical simulation analyses, the gratings' characteristics are given at various temperatures and strains. The results obtained using such a method are also testified by experiments. 相似文献
7.
A 40-Gb/s optical time division multiplexing (OTDM) return-to-zero (RZ) transmission experiments including a dynamic polarization mode dispersion (PMD) compensation was reported. The dynamic PMD compensator is made up of two-stage four degrees of freedom (DOF). The first stage adopts polarization controller and fixed time-delayed line. The second stage is variable differential group delay (DGD) element. The PMD monitoring technique is based on degree of polarization (DOP) as error signal. A novel practical adaptive optimization algorithm was introduced in dynamic adaptive PMD compensation. The experimental results show that the performance of the PMD compensator is excellent for 40-Gb/s RZ transmission systems with the large DGD. With this compensator, a significant improvement of system performance can be achieved in the eye pattern of a received signal. The first-order compensating ability of the compensator is greater than 30 ps. The second-order compensating ability is greater than 200 ps2. The first 相似文献
8.
提出一种利用组合透镜系统与渐变折射率光纤相结合改进激光 器管芯到单模尾纤耦合性能的新方法. 这种方法首先利用组合透镜系统对具有像 散的激光器输出光束进行整形, 然后采用渐变折射率光纤对整形后的光束进行聚焦处理, 并将处理后的的光束耦合进入普通单模光纤. 利用Jones矩阵理论分析表明, 采用这种方法可以得到86%的功率耦合效率, 1 dB插入损耗对应的渐变折射率光纤长度、 横向偏移和倾斜角容差分别为60 μm, 30 μm和2.4°, 且结构简单, 便于操作, 特别适合于大功率激射的激光模块到单模光纤的耦合. 对于提高激光器输出功率, 改善光束质量具有重要意义. 相似文献
9.
建立了具有两个取样周期略有不同的取样光纤光栅反射镜的Vernier波长调谐机制的光纤分布布拉格反射式激光器的数值仿真模型,对激光器的输出特性进行了分析. 研究了激光器输出特性随着激光器前后光栅反射镜波长以及前后光栅反射镜反射率的变化关系. 提出了对两取样光栅反射率的优化配置方案,可以使输出激光的边模抑制比有所提高;同时对波长调节方式也进行了探讨;进行了实验研究.
关键词:
取样光纤光栅
光纤激光器
波长可调谐激光器 相似文献
10.
基于压电陶瓷的光相位调制器的调制系数测量及验证 总被引:1,自引:0,他引:1
实现了一种快速简单有效的测量基于压电陶瓷(PZT)的光相位调制器相位调制系数的方法。利用光纤马赫-曾德尔(M-Z)干涉仪输出光强度与两臂相位差的函数关系,通过3×3解调算法可以计算基于PZT的光相位调制器的相位调制系数。实验中在M-Z干涉仪另一臂加上一个基于PZT的相位调制器以减小系统噪声的影响,并在相位生成载波(PGC)解调实验中作为干扰源。最后通过PGC解调方案解调出了3×3耦合器的第一路输出信号中的干扰信号,实验验证了所测量的结果,表明该方法是行之有效的。 相似文献