Ion current collected at various distances and argon backgroundpressures in a copper vacuum arc

The ion current collected by a probe biased at the cathode potential and located behind an annular anode of a vacuum arc is measured as a function of distance to the cathode and background argon pressure. The arc is formed between a circular Cu cathode and an annular anode. Arc current is 170 A, and the arc duration is 0.9 s. The arc is ignited by momentary contact of a movable W trigger rod (held at anode potential) with the cathode. Arc voltage, arc current, and ion current are measured using an analog data acquisition card and a personal computer. Arc voltage and arc current values are stable during the arc and their normalized standard deviation is less than 0.07. Ion current is noisy and fluctuates during the arc with a normalized standard deviation that varies from 0.5 at p<0.1 torr up to more than 1.5 at p>1 torr     

Measurement of the tungsten ion concentration after forcedextinction of a vacuum arc

The concentrations of singly ionized and neutral tungsten atoms were measured by laser-induced fluorescence after the forced extinction of vacuum arcs between tungsten-copper butt contacts, 28-mm in diam. and 10-mm apart. The 50-Hz current was forced to zero at its maximum of 200 A in 1.3 μs by application of a reverse voltage. Near current zero, the ion concentration of 4×10¹⁷ m^-3 is of the same order of magnitude as the atomic tungsten concentration, which is 6×10¹⁷ m^-3. While the concentration of the neutrals remains virtually constant during 20 μs after current zero, the ion concentration decays by three orders of magnitude in the same time. The decay-time constant varies from 1.9 μs close to the postarc cathode to 3.6 μs near the postarc anode. It is concluded that the dielectric recovery of vacuum gaps after diffuse arcs is mainly controlled by residual charge carriers     

Computer simulation of post-arc plasma behavior at short contactseparation in vacuum

Rapid commutation of a vacuum arc prior to zero results in the postarc current that subsequently flows due to the transient recovery voltage (TRV) developing across the interelectrode gap. If the rate of change of the arc current exceeds the ability of the device to interrupt the condition, it can be reestablished in the reverse direction, i.e. what was the anode becomes the new cathode. An attempt to model the postcurrent zero phenomena in the light of gas dynamics as applied to the plasma of the metal vapor arc is described. The basic conservation laws and the Maxwell equations, as well as the current continuity law, are formulated and the solutions of those equations are presented. The short distance between the electrodes in practice of much less than a millimeter is specifically noted     

Investigation of ion behavior associated with anode-spot modetransition in vacuum arcs

The ion behavior phenomenon associated with transitions of the anode discharge mode to the anode-spot mode is studied by measuring the wall ion current and by spectroscopic observation in vacuum arcs. The anode mode transfers when the wall ion current attains a certain magnitude that is independent of the cathode, but dependent on the anode. The ion-current function to the arc current increases when the arc current increases in the diffuse arc. Spectral-line intensity of Cu III emitted from the plasma in the anode region increases with an instantaneous arc current of a 5-kA peak (kAp) sinusoidal half-wave. These findings suggest an idea for the mode transition, that an ion generation region appears, and that an increase in the ion density produces a positive potential hump near the anode, which results in the negative anode voltage drop triggering the mode transition. After the mode transition, an arc current is found to reduce the ion current near the crest of a sinusoidal current in a copper arc. This appears to be significant for the arc on a small anode. The decrease in the ion current is attributed to the recombination of ions decelerated by anode vapor with electrons emitted from the hot spot on the anode     

Experimental investigations of the currents collected by metalshields in high-current vacuum arcs

This paper presents experimental results of currents collected on the three-element condensation shield connected to the cathode potential in high-current vacuum arcs. The arc current had 900 Hz, 150 Hz, or 50 Hz half-cycle sinusoidal shapes and was conducted between the CuCr40 contacts with a diameter of 50 mm (cathode) and 30 mm (anode) spaced 10 mm apart. Most of the measurements were made for the current of 900 Hz with peak values up to 9 kA. Arc voltage, floating shield potential, and distribution of shield currents were measured. It was found that the current collected by the shield and also the arc voltage and floating shield potential are greater for higher frequency currents, and that they are affected by the arc mode. Considerable shield current is observed during a high-amplitude (HA) oscillation sequence of arc voltage while its mean value is increased. For 900-Hz arcs at the 9-kA peak value (I_am), the ratio of shield current (i_s) to an instantaneous value of arc current (i_a) reaches even 40% near I_am value. In the initial half-cycle period (before the initiation of high-voltage oscillation), the ratio of i_s/i_a increases with i_a and current frequency. A close relationship was found between arc voltage and current distribution on a three-element shield     

Ion flux from the cathode region of a vacuum arc

The properties of the ion flux generated in a vacuum arc are reviewed. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (~10% of the total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, although some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of the solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory and the gas dynamic theory. Experimental data indicate that these theories serve reasonably well when used to predict the mean values of the charge state, ion potential, and ion energies for the ion flux, but are quite insufficient when compared with the results for the potentials and energies of individual ions     

Observation of tungsten particles in vacuum arcs by laser inducedfluorescence

We have clarified the relation between the decay of tungsten ion density in the vicinity of current zero and vacuum arc mode in high current period by using a laser induced fluorescence method in tungsten vacuum arcs of 60 Hz sinusoidal current with the peak value of 3.3, 6.7, and 9.8 kA. In the case of 6.7 kA, the arc mode was the anode spot mode. Because of the generation of the anode spot, the tungsten ion density near the anode was higher than near the cathode and the density near the anode was about ten times as high as the case of 3.3 kA which was the diffuse mode. In the case of 9.8 kA, which was the intense arc mode, the density near the anode was not significantly different from the case of 6.7 kA. The density near the cathode was higher than near the anode and tungsten ions were observed till about 30 μs after current zero while they disappeared at current zero in the other cases     

A Model of the Multicathode-Spot Vacuum Arc

A model is proposed for the multicathode-spot (MCS) vacuum arc. A zero-order model is filrst constructed, whereby the interelectrode plasma is produced by the multitude of cathode spots, and flows to the anode upon which it condenses. The electron density is calculated by assuming that the plasma is uniform within a cylinder bounded by the electrodes and using expenmental data for the ionic velocities and ion current fraction obtained in single cathode spot arcs. The electron density thus obtained is proportionate to the current density, and is equal to 5 × 1020 m-3 in the case of a 107-A/m2 Cu arc. The model predictions are a factor of 3-4 lower than measured values. First-order perturbations to the zero-order model are considered taking into account inelastic electron-ion collisions, plasma-macroparticle interactions, the interaction of the self-magnetic field with the plasma and electric current flows, and the interaction with the anode. Inelastic collisions tend to increase the ionicity of the plasma as a function of distance from the cathode, in agreement with spectroscopic observations. Macroparticles are heated by ion impact until they have significant evaporation rates. The vapor thus produced is ultimately ionized, and most probably accounts for the discrepancy between the zero-order prediction of electron densities and the measured values. Constrictions near the anode in both the plasma and electric current flows have been calculated. An overabundant electron current supply forces the anode to assume a negative potential with respect to the adjacent plasma.     

Ion Flux from the Cathode Region of a Vacuum Arc

This paper reviews the properties of the cathode ion flux generated in the vacuum arc. The structure and distribution of mass erosion from individual cathode spots and the characteristics of current carriers from the cathode region at moderate arc currents are described. An appreciable ion flux (～10% of total arc current) is emitted from the cathode of a vacuum arc. This ion flux is strongly peaked in the direction of the anode, though some ion flux may be seen even at angles below the plane of the cathode surface. The observed spatial distribution of the ion flux is expressed quite well as an exponential function of solid angle. The ion flux is quite energetic, with average ion potentials much larger than the arc voltage, and generally contains a considerable fraction of multiply-charged ions. The average ion potential and ion multiplicity increase significantly for cathode materials with higher arc voltages, but decrease with increasing arc current for a particular material. The main theories concerning ion acceleration in cathode spots are the potential hump theory (PH), which assumes that all ions are created at the same potential, and the gas dynamic theory (GD), which assumes that all ions are created with the same flow velocity. Experimental data on the potentials and energies of individual ions indicates that these theories in their original forms are not quite correct, however extensions or modifications of the PH and GD theories seem very likely to be able to predict correct values for the charge states, potentials, and energies of individual ions.     

Angular distribution of ion current emerging from an aperture anodein a vacuum arc

The ion current distribution emerging from a vacuum arc between a Cu cathode and a conical ring anode was measured by a set of five probes. It was found that: (1) the total ion current emerging through the anode was 8.5% of the arc current; (2) the measured ion distribution without a magnetic field was a slightly flattened cosinusoidal function; (3) with an axial magnetic field, the ion current distribution became peaked along the z axis; (4) the total ion current extracted through the anode aperture slightly increased with the magnetic field; and (5) an anode with a larger aperture exhibited less magnetic collimation     

A physical model of the low-current-density vacuum arc

A one-dimensional (1-D) physical model of the low-current-density steady-state vacuum arc is proposed. The model is based on the continuity equations for ions and electrons and the energy balance for the discharge system; the electric potential distribution in the discharge gap is assumed to be nonmonotonic. It is supposed that the ion current at the cathode is generated within the cathode potential fall region due to the ionization of the evaporated atoms by the plasma thermal electrons having Boltzmann's energy distribution. The model offers a satisfactory explanation for the principal regularities of a hot-cathode vacuum arc with diffuse attachment of the current. The applicability of the model proposed to the explanation of some processes occurring in a vacuum arc, such as the flow of fast ions toward the anode, the current cutoffs and voltage bursts, and the backward motion of a cathode spot in a transverse magnetic field is discussed     

Operational characteristics of a plasma cathode with a grid stabilization in a two-stage ion source

The discharge characteristics and the parameters of the cathode plasma in a two-stage ion source with a grid plasma cathode and a magnetic trap in the anode region are investigated. It is shown that an increase in the gas pressure and the accompanying increase in the reverse ion current in the bipolar diode between the cathode and anode plasmas lead to an increase in the cathode plasma potential and a transition of the cathode into the regime of electron emission from the open plasma boundary. The dependence of the ion current extracted from the anode plasma on the area of the exit aperture of the hollow cathode and the mesh size of the grid plasma cathode is explained. The conditions at which the ion emission current from the anode plasma is maximum are determined. The potential difference at the bipolar diode is measured by using the probe method. It is shown that, when the gas pressures reaches a critical value determined by the mesh size of the grid plasma cathode, the discharge passes into a contracted operating mode, in which the ion current extracted from the anode plasma decreases severalfold.     

Vacuum Arc Anode Phenomena

This paper briefly reviews anode phenomena in vacuum arcs, specially experimental work. It discusses, in succession, arc modes at the anode, anode temperature measurements, anode ions, transitions of the arc into various modes (principally the anode spot mode), and theoretical explanations of anode phenomena. The two most common anode modes in a vacuum arc are a low current mode where the anode is basically passive, acting only as a collector of particles emitted from the cathode, and a high current mode with a fully developed anode spot. Characteristically this anode spot has a temperature near the atmospheric boiling point of the anode material and is a copious source of vapor and energetic ions. However, other anode modes can exist. A low current vacuum arc with electrodes of readily sputterable material may emit a flux of sputtered atoms from the anode. Usually this sputtered flux will have little effect upon the vacuum arc, but in certain circumstances it could be significant. A vacuum arc doesn't always transfer directly from a low current mode to the anode spot mode. In appropriate experimental conditions, formation of an anode spot may be preceded by the formation of an anode footpoint. This footpoint is luminous, but much cooler than a true anode spot. Finally, (again in appropriate circumstances) several small anode spots may form instead of one large anode spot. With sufficient increase in arc current or arcing time these will usually combine to form a single large active spot.     

Triggered discharges with high arc voltages in a vacuum interrupter

Studies of nonsustained disruptive discharges (NSDDs), isolated cases of which can occur in vacuum interrupters, indicate lateral discharges between the cathode and shield, which can initiate a brief discharge between the contacts. To facilitate the study of such discharges, the sample discharges were triggered by a surface discharge induced by a spark gap, built into the side of the cathode, and observed with a high-speed film camera and image-converter camera. The tests showed a cathode spot after igniting. The emitted electrons first charge the shield negatively and then are directed toward the anode. The discharge burns at a high voltage, with current ranging from 10 to 100 A. After a period of up to 400 μs, the current demand increases abruptly; an arc discharge occurs between the contacts and discharges the capacitances near the switch. The contact gap undergoes a rapid dielectric recovery, and the restored voltage is maintained. These types of discharge were also observed with NSDDs; thus it can be assumed that the triggered discharges studied correspond to the NSDD type     

Characteristic features of the emission properties of pulsed broad-beam ion and plasma sources utilizing the evaporation of metal by a vacuum arc

An experimental confirmation was obtained of the anode potential fall effect in pulsed broad-beam ion and plasma sources utilizing the evaporation of metal by a vacuum arc. An increase in the overall voltage across the arc discharge was discovered. The investigations demonstrated that the magnitude of the positive anode fall depends on the structural features of the ion source and are determined by the ratio of the plasma flux directed onto the lateral surface of the anode to the total plasma flux from the cathode spot. It was established that the anode fall effect is controlled and makes it possible to influence the homogeneity of the ion current distribution over the beam cross section, the efficiency of extracting ions from the plasma, and the charge composition of the ion flux.Scientific-Research Institute of Nuclear Physics, Polytechnic University, Tomsk. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 82–92, February, 1994.     

Dielectric recovery of copper chromium vacuum interrupter contactsafter short-circuit interruption

The recovery of a vacuum interrupter gap after short-circuit interruption was measured by application of an overshooting transient recovery voltage (TRV) several tens of microseconds after current zero. Copper chromium contact materials were employed varying in composition (25 and 50% chromium content), gas content, and production method. The gap failure was either pure dielectric or it was dominated by a significant postarc current. Therefore, postarc current phenomena were experimentally investigated focused on the relationship among the postarc current, the power frequency current amplitude, and the gap length. It was found that two postarc current maxima exist: the first strongly dependent on the power frequency current, and the second on the field strength. A correlation among postarc current facilitated failures, the ultimately dielectric recovery, and the erosion rate of the material was found. Strong indication is given that all of these effects are dominated by the metal vapor pressure rise given by the constricted rotating arc. A significant influence of the material properties can be drawn from these experiments, allowing a good estimation of the capability for short-circuit current interruption, thus providing a useful tool for material development     

Experimental investigation of the anode region of a free-burning atmospheric-pressure inert-gas arc I. General characteristics of the discharge. Low-current regime

This paper reports the experimental investigation of the anode region of a free-burning inert-gas arc at atmospheric pressure in the current range from a few amperes to hundreds of amperes. The tungsten thermionic-emission cathode and the large-diameter water-cooled copper anode that were used permitted the anode arc root to assume its natural form. The general characteristics of the discharge are given and results are presented from investigations of the anode region at low currents, where the anode arc root is single and constricted, but erosion-free. Measurements of the plasma parameters as well as the current density in the arc root are reported, and a comparison is made between the values obtained and those characteristic of the region of the cathode arc root. Zh. Tekh. Fiz. 67, 35–40 (January 1997)     

Experimental Investigation of Anode Activities in High-Current Vacuum Arcs

It is well known that the melting of electrodes (mainly anode melting) in vacuum arc can increase the metal vapor density around current zero and even lead to interruption failure. In order to clarify the anode activities and their influence on arc appearance and interruption capacity, series experiments of cup-shaped axial magnetic field copper electrodes were conducted. Obvious anode melting was detected; the liquid copper flowed on the contact plate of anode and formed a clockwise swirl flow. The appearance of anode melting is likely to correlate to the transition of arc mode from high-current diffuse mode to high-current diffuse column mode. The melting of anode was severer than cathode and was influenced by the distribution of cathode spots. Various kinds of copper particles at macroscopic level can be seen in arc column. Even at the interruption limit, the majority of melted copper of anode sputtered out of gap in form of liquid droplets or was pressed into the cup of anode, the copper vapor evaporated into arc column only accounted for a few portion and no obvious anode jets was found due to large plasma pressure in arc column.      

Electrical and pyrometric measurements of the decay of the anodetemperature after interruption of high-current vacuum arcs andcomparison with computations

Vacuum arcs of up to 20-kA peak current were investigated. The surface temperature of the anode area melted during the anode spot mode was determined by pyrometry and the evaluation of thermionic currents. The measurements confirm the computations of heating and cooling of the anode, taking into account heat conduction melting/solidification, and evaporation. Pyrometrically obtained temperatures agree well with theory. This gives confidence in the heat conduction model and also shows that the boiling temperature was reached during arcing. Another method evaluates currents of a milliampere value after arcs of several kiloamperes and postarc currents of amperes. Experimental observation (e.g., loading of the shield surrounding the contacts) and theoretical analysis of the interfering effects support the idea that the currents measured are due to thermionic emission     

Anode Phenomena in Vacuum and Atmospheric Pressure Arcs

This paper summarizes recent experimental data related to anode phenomena in both vacuum and atmospheric pressure arcs. Currents in the range 10A to 3OkA are discussed, and particular emphasis is placed on the effect of plasma flow from the cathode. For vacuum arcs this plasma flow is the directed motion of metal ions from the cathode spots. These ions reduce the anode voltage drop, and maintain a diffuse anode termination. At atmospheric pressure the ion flow is impeded by gas-atom collisions. However, a plasma flow towards the anode can result from magnetic pinch forces at the constricted cathode termination. In the absence of plasma flow, the anode termination constricts to a vigorously evaporating anode spot. For a typical non-refractory electrode such as copper, the spot operates at a temperature close to the boiling point irrespective of the gas pressure. The spot temperature is dictated by the balance between electrical input power and evaporative losses. These anode phenomena are discussed in relation to vacuum switchgear, arc welding and arc furnaces.