Interrupting capacity of vacuum interrupters depending on thefrequency of current

Results of arc reignition voltages during current interruption of frequencies from 5.9 to 60 kHz by a short vacuum gap are presented. Measured arc reignition voltages depend on current amplitude and frequency, the values of preliminary arc current at the moment of switching on the HF current, and the discharge mode in the preceding current semiwave. Threshold amplitudes of the first semiwave of currents l_m1l and I_m1h as a function of frequency are determined. I_m1l and I_m1h divide current into three ranges to which different kinds of arc reignition voltage distribution correspond. Particularly large dispersion of reignition voltages takes place in the current range from I_m1l to I_m1h. The threshold current I_m1h is inversely proportional to frequency in the range from about 10 to 60 kHz, which is in agreement with the elaborated mathematical model     

Experimental investigations of the currents collected by metalshields in high-current vacuum arcs

This paper presents experimental results of currents collected on the three-element condensation shield connected to the cathode potential in high-current vacuum arcs. The arc current had 900 Hz, 150 Hz, or 50 Hz half-cycle sinusoidal shapes and was conducted between the CuCr40 contacts with a diameter of 50 mm (cathode) and 30 mm (anode) spaced 10 mm apart. Most of the measurements were made for the current of 900 Hz with peak values up to 9 kA. Arc voltage, floating shield potential, and distribution of shield currents were measured. It was found that the current collected by the shield and also the arc voltage and floating shield potential are greater for higher frequency currents, and that they are affected by the arc mode. Considerable shield current is observed during a high-amplitude (HA) oscillation sequence of arc voltage while its mean value is increased. For 900-Hz arcs at the 9-kA peak value (I_am), the ratio of shield current (i_s) to an instantaneous value of arc current (i_a) reaches even 40% near I_am value. In the initial half-cycle period (before the initiation of high-voltage oscillation), the ratio of i_s/i_a increases with i_a and current frequency. A close relationship was found between arc voltage and current distribution on a three-element shield