Application of Multivariate Techniques in Optimization of Spectroanalytical Methods

Abstract

The present article describes fundamentals and applications of multivariate techniques used for the optimization of analytical procedures and systems involving spectroanalytical methods such as flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ETAAS), inductively coupled plasma optical emission spectrometry (ICP OES), and inductively coupled plasma mass spectrometry (ICP‐MS), considering the main steps of a chemical analysis. This way, applications of experimental designs in optimization of sampling systems, digestion procedures, preconcentration procedures, instrumental parameters of quantification steps of analytical methods, and robustness tests have been summarized in this work.     

Procedures of Separation and Pre‐concentration for Molybdenum Determination Using Atomic Spectrometry—a Review

Abstract

The literature concerning the improvement of atomic and ionic procedures for molybdenum determination through separation and pre‐concentration were updated. Analytical procedures based on flame atomic absorption spectrometry (AAAS), electrothermal or graphite furnace atomic absorption spectrometry (GFAAS), inductively coupled plasma optical emission spectrometry (ICP‐OES), and inductively coupled plasma mass spectrometry were reviewed taking into consideration the preliminary steps, which can enhance the selectivity and sensitivity based on co‐precipitation, solvent extraction, and solid‐phase extraction. Both in‐batch and on‐line procedures were considered.     

Slurry Sampling—An Analytical Strategy for the Determination of Metals and Metalloids by Spectroanalytical Techniques

Abstract

This article critically overviews the state-of-the-art of slurry sampling as an approach for the minimization of sample preparation prior to the determination of metals and metalloids in complex matrices by spectroanalytical techniques. Relevant factors involved in the optimization of slurry-based analytical procedures and the dependence of the quality of the results on the calibration method selected are discussed in detail. The advantages and limitations compared to solid sampling for the analysis of solid matrices are highlighted and discussed.

Analytical applications of slurry sampling reported in the literature emphasizing publications between 2004 and 2009 are comprehensively compiled covering detection by flame atomic absorption spectrometry (FAAS), electrothermal atomic absorption spectrometry (ET-AAS), cold vapor atomic absorption spectrometry (CV-AAS), hydride generation atomic absorption spectrometry (HG-AAS), hydride generation atomic fluorescence spectrometry (HG-AFS), inductively coupled plasma optical emission spectrometry (ICP-OES), and inductively coupled plasma mass spectrometry (ICP-MS).     

Molybdenum,Platinum, and Tantalum Metal Atomizers or Vaporizers in Analytical Atomic Spectrometry

Abstract

The application of metal (tantalum, molybdenum, and platinum) devices in analytical atomic spectrometry is reviewed in this article. These metal devices have been employed in various analytical atomic spectrometric techniques for more than three decades, mainly as electrothermal atomizers or electrothermal vaporizers, in various physical shapes, such as tubes, platforms, loops, and wires (or coils/filaments). Their application spans from atomic absorption spectrometry (AAS), atomic emission spectrometry (AES) atomic fluorescence spectrometry (AFS), inductively coupled plasma atomic emission spectrometry (ICP‐AES) to inductively coupled plasma mass spectrometry (ICP‐MS). The analytical figures of merit and the practical applications reported for these metal devices are reviewed, and the atomization mechanism on these metal atomizers is briefly summarized, too. In addition, other applications of the metal devices are discussed, including analyte preconcentration by electrodeposition and sequential metal vapor elution analysis (SMVEA). Furthermore, the application of these metals in graphite furnaces encompasses the schemes with the metals in the form of furnace linings, platforms, or impregnated salts.     

Comparison of Inductively Coupled Plasma with Classical Analytical Techniques in the Analysis of Southern Oregon Lithia Water: Inclusion of a Local Resource in the Undergraduate Chemistry Curriculum

Abstract

Lithia water, a community resource of local historical significance, is described as a central theme in the undergraduate analytical chemistry sequence. A statistical comparison of the classical determination of major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and anions (HCO₃ ^?, Cl^?) reinforces statistical and charge‐balance concepts covered in analytical chemistry. Subsequent determination of these major cations by inductively coupled plasma (ICP) enables students to statistically evaluate the presence of bias between instrumental and classical methods. The effect of easily ionized elements on ICP calibration sensitivity and linearity via the use of cesium as an ionization suppressor is reported.     

Sample Preparation for the Determination of Metals in Food Samples Using Spectroanalytical Methods—A Review

Abstract

The present article gives an overview of recent publications and modern techniques of sample preparation for food analysis employing atomic and inorganic mass spectrometric techniques, such as flame atomic absorption spectrometry, chemical vapor generation atomic absorption and atomic fluorescence spectrometry, graphite furnace atomic absorption spectrometry, inductively coupled plasma optical emission spectrometry, and inductively coupled plasma mass spectrometry. Among the most frequently applied sample preparation techniques for food analysis are dry ashing, usually with the addition of an ashing aid, and acid digestion, preferably with the assistance of microwave energy. Slurry preparation, particularly with the assistance of ultrasound, is increasingly used to reduce acid consumption and sample preparation time. Direct analysis of solid samples is gaining importance in the field of food analysis as it offers the highest sensitivity, avoids the use of acids and other aggressive reagents, makes possible the analysis of micro‐samples, and can be applied for fast screening analysis, e.g., of fresh meat.     

ICP-AES法测定蚂蚁粉中多种微量元素

研究了ICP－AES法测定蚂蚁粉中多种微量元素的方法，通过方法试验确认采用低温灰化法制备样品，不仅能满足ICP－AES法测定的要求，同时具有样品处理方法简单，快速，经济等优点，其方法的回收率在92．0－100．7％之间，精密度在0．20％－9．29％之间，实验数据证明该方法完全可以满足同类样品的微量元素检测要求。     

Online Copper Removal for Selenium Determination by Hydride Generation–Inductively Coupled Plasma Optical Emission Spectrometry

Abstract

Selenium determination in samples with a high copper content by hydride generation–inductively coupled plasma optical emission spectrometry (HG‐ICP‐OES) after online copper removal and selenium (VI) reduction is described. An activated carbon minicolumn was used for the retention of copper and its subsequent separation of Se. Se(VI) was then online reduced by heating into a PTFE coiled reactor with 12 M HCl. The analyte was introduced into a water stream containing sodium tetrahydroborate (NaBH₄) in order to generate selenium hydride (H₂Se). The detection limit (DL) obtained was 0.8 µg L^?1, and the precision, expressed by the relative standard deviation (RSD), was 2.5% (n=10; 10 µg L^?1 selenium level). The current method was applied to the Se determination in two copper reference materials, MBH‐39DK 3601 (with a Se content of 90 mg kg^?1) and MBH‐39 DK 3604 (with a Se content of 15 mg kg^?1).     

Automated Online Preconcentration System for the Determination of Trace Amounts of Lead Using Pb‐Selective Resin and Inductively Coupled Plasma–Atomic Emission Spectrometry

Abstract

An automated sequential‐injection online preconcentration system was developed for the determination of lead by inductively coupled plasma–atomic emission spectrometry (ICP‐AES). The preconcentration of lead was performed with a minicolumn containing a lead‐selective resin, Analig Pb‐01, which was installed between a selection and a switching valve. In an acidic condition (pH 1), lead could be adsorbed on the resin. The concentrated lead was afterward eluted with 25 µL of 0.06 M nitrilotriacetic acid (NTA) solution (pH 9) and was subsequently transported into the nebulizer of ICP‐AES for quantification. The selectivity of the resin toward lead was examined using a solution containing a mixture of 61 elements. When a sample volume of 5 mL was used, the quantitative collection of lead (≥97%) was achieved, along with an enrichment factor of 19, a sampling frequency of 12 samples hr^?1, a detection limit of 70 pg mL^?1, and a lowest quantification limit of 100 pg mL^?1. The linear dynamic range was 0.1 to 5 ng mL^?1, and the relative standard deviation (n=9) was 0.5% at a 5 ng mL^?1 Pb level. The detection limit of 30 pg mL^?1 and lowest quantification limit of 50 pg mL^?1 could be achieved when 10 mL of sample volume was used. The accuracy of the proposed method was validated by determining lead in the standard reference material of river water (SLRS‐4), and its applicability to the determination of lead in environmental river water samples was demonstrated.     

Laser Ablation Inductively Coupled Plasma Mass Spectrometry: Principles and Applications

Abstract

The application of laser ablation inductively plasma mass spectrometry (LA‐ICP‐MS) to the determination of major, minor, and trace elements as well as isotope‐ratio measurements offers superior technology for direct solid sampling in analytical chemistry. The advantages of LA‐ICP‐MS include direct analysis of solids; no chemical dissolution is necessary, reduced risk of contamination, analysis of small sample mass, and determination of spatial distributions of elemental compositions. This review aims to summarize recent research to apply LA‐ICP‐MS, primarily in the field of environmental chemistry. Experimental systems, fractionation, calibration procedures, figures of merit, and new applications are discussed. Selected applications highlighting LA‐ICP‐MS are presented.     

Methodology for the Determination of Stoichiometry and Metal Impurities in New PZT Ceramics by Inductively Coupled Plasma Optical Spectrometry (ICP OES)

ABSTRACT

An inductively coupled plasma optical emission spectrometry (ICP OES) method for Pb, Zr, Ti, Sr, Cr, Fe, Cu, Mn, and Al determination in PZT-ceramics is described. Careful analytical work was carried out in order to evaluate precision, accuracy, and matrix interference. Different procedures were investigated for the ceramics decomposition. Axially viewed plasma operating conditions were evaluated for trace elements (Al, Fe, Cu, Mn, and Cr) in presence of sample matrix. The relative standard deviation (RSD) ranged from 0.7 to 3.9%, whereas the analytes recoveries in the spiked samples ranged from 92 to 119%. The detection limits (LODs) of trace elements ranged from 2.4 to 2.6 µg g^?1. The developed method is useful for evaluating the PZT-ceramics synthesis.     

Critical Evaluation of Analytical Procedures for the Determination of Lead in Seawater

Abstract: This article presents a critical evaluation of the analytical procedures used for the determination of lead in seawater, which is important because lead is a good indicator of marine pollution caused by human activities. Sampling, storage, and pretreatment techniques are briefly overviewed, including the significance of systematic errors that cannot be corrected later on. The main techniques in this article are electrothermal–atomic absorption spectrometry (ET-AAS), inductively coupled plasma–mass spectrometry (ICP-MS), and voltammetry. Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma–optical emission spectrometry (ICP-OES) are treated as well, although their limits of quantification are not sufficient for a determination of lead in unpolluted seawater. Even when separation and preconcentration techniques are applied, these techniques are only capable of detecting lead in polluted coastal seawater. Separation and preconcentration are actually also required for ET-AAS and ICP-MS in order to determine the lowest concentrations of lead found in unpolluted open-ocean seawater, which is still a challenge for the analytical chemist.     

Interfacing Microfluidic Handling with Spectroscopic Detection for Real‐Life Applications via the Lab‐on‐Valve Platform: A Review

Abstract

One of the current needs within the analytical spectrometric community is the development of straightforward and cost‐effective, yet rugged, sample processing procedures aimed at precluding both spectroscopic and nonspectroscopic matrix interferences while fostering concomitant sample enrichment. Illustrated via selected representative examples, this review presents and discusses the current state of the art in implementing miniaturised and automated sample treatments for environmental and biochemical assays via microfluidic systems exploiting the lab‐on‐valve (LOV) platform in hyphenation with syringe pump propelling devices as a front end to a plethora of spectroscopic detection schemes including ultraviolet‐visible (UV‐Vis) spectrometry, spectrofluorimetry, chemiluminescence, atomic absorption spectrometry (AAS), atomic flourescence spectrometry (AFS), and inductively coupled plasma‐atomic emission spectrometry/mass spectrometry (ICP‐AES/MS). In contrast to lab‐on‐a‐chip units, the versatile configuration of the micromachined LOV readily facilitates the implementation of on‐line unit operations at will encompassing not merely the introduction of minute, well‐defined volumes of sample followed by chemical derivatization, but the potential for accommodation of solid‐phase extraction, hydride/vapor generation, precipitation/coprecipitation, and bead injection protocols with no need for chip redesign.     

An Overview of the Use of Yttrium for Internal Standardization in Inductively Coupled Plasma–Atomic Emission Spectrometry

Abstract

Internal standardization is a widely used method for compensating nonspectral interference in inductively coupled plasma (ICP) spectrometry. Emphasis is given on the choice of the suitable element and its specific spectral line as an efficient internal standard. This choice is the result of multi-variable evaluations and analytical applications. In inductively coupled plasma–atomic emission spectrometry (ICP-AES) and other spectrometric techniques several spectral lines of the same or different elements have been evaluated as potential internal standards. Yttrium spectral lines fulfill certain prerequisites and they are favored by a large number of researchers. In our discussed review, we present several reports of ICP-AES techniques that employ yttrium as the internal standard. These reports are classified according to specific sample origin and aim of the research.     

REVIEW: Iodine Determination by Inductively Coupled Plasma Spectrometry

Abstract

Iodine is a chemical element with critical physiological roles and its determination using instrumental analysis is not trivial. Inductively coupled plasma spectrometry associated with either optical emission (ICP-OES) or mass spectrometry (ICP-MS) may be employed, but each alternative presents limitations considering iodine behavior in argon plasma and the occurrence of interferences. Sample preparation is also a critical issue when using sample introduction by pneumatic nebulization due to memory effects. This critical review discusses the literature dealing with sample preparation followed by ICP-OES or ICP-MS for iodine determination in a plethora of samples. It is shown that the best figures of merit may be reached using sample preparation in alkaline medium followed by ICP-MS measurements.     

Dry Ashing Preparation of (Quasi)solid Samples for the Determination of Inorganic Elements by Atomic/Mass Spectrometry

Abstract:

This work presents an overview of the development of dry ashing preparation techniques for solid and quasisolid sample analysis by atomic and inorganic mass spectrometry, including flame/graphite furnace atomic absorption spectrometry, chemical vapor generation atomic absorption/fluorescence spectrometry, and inductively coupled plasma–optical emission/mass spectrometry. This article also summarizes all of the dry ashing methods reported in the past 20 years. The dry ashing methods applied to sample preparation are classified as electrothermal ashing, microwave ashing, oxygen combustion, and other special ashing methods including laser, ultraviolet (UV)/ozone, and plasma. Moreover, the development of relevant devices is discussed in context.     

An ultra‐black silicon absorber

An ultra‐black (A > 99%) broadband absorber concept on the basis of a needle‐like silicon nanostructure called Black Silicon is proposed. The absorber comprises Black Silicon established by inductively coupled plasma reactive ion etching (ICP‐RIE) on a highly doped, degenerated silicon substrate. Improved absorbers also incorporate an additional oxide capping layer on the nanostructures and reach an absorptance of A > 99.5% in the range of 350 to 2000 nm and A ∼ 99.8% between 1000 and 1250 nm. Fabrication of the absorbers is consistent with CMOS standards and requires no lithography. (Picture: Kasper, Friedrich‐Schiller‐University Jena)     

矩阵投影算法用于校正ICP—AES中的光谱干扰

本文将矩阵投影算法应用于ＩＣＰ－ＡＥＳ中光谱干扰的校正，在有关文献方法基础上，对残差作了进一步的校正，并采用最优化技术确定背景光谱的最优解，因而提高了方法的准确度。对实际干扰体系的校正结果表明，本方法能够对ＩＣＰ－ＡＥＳ中比较复杂的结构背景以及谱线重叠干扰进行较为准确地校正。     

悬浮液雾化进样感耦等离子体基本参数研究——Ⅱ等离子体电子密度测定

研究了悬浮液雾化进样感耦等离子体原子发射光谱基本参数-等离子体电子密度的测定。实验使用Stark效应常用的谱线H_β线来计算等离子体电子密度。测定结果表明悬浮液雾化进样同水溶液雾化进样感耦等离子体原子发射光谱时等离子体电子密度没有发生显著的变化,数值基本上为1015数量级。固含量高达10％ TiO₂悬浮液雾化进样等离子体原子发射光谱,电子密度测定结果仅有微小的降低。高固含量悬浮液雾化进样等离子体原子发射光谱没有显著地影响等离子体电子密度,有助于使用高固含量悬浮液雾化进样等离子体原子发射光谱来进行痕量元素分析测定。