狭小间距间Cu/Al薄膜相互作用的分子动力学模拟

采用分子动力学模拟软件基于Lennard-Jones-9-6势函数研究了狭小间距Cu/Al纳米薄膜间的相互作用. 我们通过计算薄膜表面单位面积上的范德华相互作用能σ_E,综合性地讨论了非接触Cu/Al薄膜间的相互作用.结果显示,当两薄膜的间距从12Å减小到3Å时,相互作用能呈现两个阶段：起初几乎不变,然后迅速增大.临界间距在7 Å附近.在两薄膜相互靠近的过程中,相互作用能受体系尺寸、空位缺陷尺寸、表面涂层及薄膜间距的影响较大,然而几乎不受空位缺陷形状的影响.     

电荷俘获存储器数据保持特性第一性原理研究

本文研究HfO₂掺入Al替位Hf杂质和氧空位共同掺杂对电荷俘获型存储器存储特性的影响. HfO₂作为高介电常数材料由于具有缩小器件尺寸、提高器件性能等优势, 被广泛用于CTM的俘获层. 采用MS和VASP研究了HfO₂俘获层中掺入Al对氧空位形成能的影响. 同时计算了两种缺陷在不同距离下的相互作用能. 计算结果表明在HfO₂中掺入Al使得氧空位的形成能降低, 并且三配位氧空位的形成能比四配位氧空位的形成能降低的更多. 通过研究Al和三配位氧空位两种缺陷间不同距离的三种情况, 计算结果表明当缺陷间距为2.107 Å时, 体系的电荷俘获能最大; 量子态数最多; 布居数最小、Al–O键最长. 通过研究三种体系写入空穴后键长的变化, 得出当缺陷间距为2.107 Å时, 写入空穴后体系的Al–O键长变化最小. 以上研究结果表明, 掺入Al后可以有效提高电荷俘获型存储器的数据保持能力. 因而本文的研究为改善电荷俘获型存储器数据保持特性提供一定的理论指导.     

氧空位缺陷对PbTiO_3铁电薄膜漏电流的调控

基于非平衡格林函数及密度泛函理论第一性原理计算方法,计算了Fe, Al, V和Cu四种阳离子掺杂对氧空位缺陷引起的PbTiO_3铁电薄膜漏电流的调控.研究表明:Fe和Al离子掺杂将会增大由其中氧空位缺陷导致的铁电薄膜的漏电流,而Cu和V离子掺杂对该漏电流的大小具有明显抑制作用.这是因为Cu和V掺杂对氧空位缺陷有明显的钉扎作用.相比于半径更大的Cu离子,由于V的离子半径更小,且更接近于PbTiO_3铁电薄膜中Ti的离子半径,可以预言V离子更可能被掺杂进入薄膜,从而抑制氧空位缺陷引起的漏电流.研究结果对铁电薄膜器件的电学性能控制和优化有一定的理论指导意义.     

纳米铜薄膜塑性变形中空位型缺陷形核与演化的分子动力学研究

本文采用分子动力学方法模拟了纳米单晶铜薄膜在单向拉伸载荷作用下的塑性变形过程, 重点分析了空位型缺陷的形核过程和演化机理. 在模拟过程中, 采用镶嵌原子势描述原子间的相互作用. 模拟结果表明纳米铜薄膜中塑性变形起源于位错的表面形核, 而空位型缺陷的形核及演化都与晶体内部的位错运动密切相关. 空位型缺陷通常从位错割阶及层错交截处开始形核, 以单空位、层错四面体和不规则空位团等形式存在. 关键词： 纳米薄膜 塑性变形 空位 层错四面体     

替位杂质对低能Pt原子与Pt(111)表面相互作用影响的分子动力学模拟

采用嵌入原子方法的原子间相互作用势，通过分子动力学方法模拟了低能Pt原子与Cu，Ag，Au，Ni，Pd替位掺杂Pt(111)表面的相互作用过程，系统研究了替位原子对表面吸附原子产额、溅射产额和空位缺陷产额的影响规律，分析了低能沉积过程中沉积原子与基体表面的相互作用机理以及替位原子的作用及其影响规律.研究结果显示：替位原子的存在不仅影响着沉积能量较低时的表面吸附原子的产额与空间分布，而且对沉积能量较高时的低能表面溅射过程和基体表面空位的形成产生重要影响.替位原子导致的表面吸附原子产额、表面原子溅射以及空位形 关键词： 分子动力学 低能粒子 替位掺杂 表面原子产额 溅射 空位     

强流脉冲电子束作用下金属纯Cu的微观结构状态——空位簇缺陷及表面微孔结构

利用强流脉冲(HCPEB)电子束技术对多晶纯Cu进行了辐照处理,并利用透射电镜对HCPEB诱发的空位簇缺陷进行了表征.实验结果表明,HCPEP辐照金属可在纯Cu表层诱发大量的过饱和空位,并形成四方形空位胞及空位型位错圈和堆垛层错四面体(SFT),HCPEB瞬间的加热和冷却诱发的幅值极大的应力和极高的应变导致的整个原子平面的位移是空位簇缺陷形成的主要原因.此外,扫描电镜分析表明HCPEB辐照可以在纯Cu表面形成高密度、弥散分布和尺寸细小的微孔.过饱和空位或空位团簇沿晶体缺陷向表面扩散、凝聚是表面微孔形成的根     

单原子Al修饰空位缺陷V2C（MXene）对H2气体表面吸附的第一性原理研究

基于第一性原理计算方法,对含空位缺陷的V₂C(MXene)在不同位点修饰单原子Al的相关性能进行系统研究.研究表明,几何优化后得到含空位缺陷的V₂C稳定结构表面能为-3075.53 J/m²,单原子Al修饰本征V₂C单原子的吸附能为1.5511eV、单原子Al修饰空位缺陷V₂C的吸附能为-2.0763 eV,这表明含空位缺陷的V₂C,由于单原子Al的修饰可以明显改善晶体结构稳定性.进一步从态密度、分波态密度、吸氢能力研究发现,各体系态密度和分波态密度均出现分波越过费米能级的现象,表现出较强的金属性;V₂C吸附H₂气体分子吸附能为-7.5867 eV,而空位缺陷V₂C和单原子Al修饰空位缺陷V₂C两个体系对H₂气体分子的吸附能仅为-0.9851 eV、-2.7130 eV,均未能进一步改善V₂C对H₂气体分...     

温度对ZnO/Al2O3(0001)界面的吸附、扩散及生长初期模式的影响

构建了一个ZnO沉积在α-Al2O3(0001)表面生长初期的模型,采用基于密度泛函理论的平面波超软赝势法进行了动力学模拟.发现在400,600和800℃的条件下界面原子有不同的扩散能力,因此温度对ZnO/α-Al2O3(0001)表面界面结构以及ZnO薄膜生长初期模式有决定性的影响.在整个ZnO吸附生长过程中,O原子的扩散系数大于Zn原子的扩散系数,O原子的层间扩散对薄膜的均匀生长起着重要作用.进一步从理论计算上证实了ZnO在蓝宝石(0001)上两种生长模式的存在,400℃左右生长模式主要是Zn螺旋扭曲生长,具有Zn六角平面对称特征,且有利于Zn原子位于最外表面.600℃左右呈现为比较规则的层状生长,且有利于O原子位于最外表面.模拟观察到在ZnO薄膜临近Al2O3基片表面处,Zn的空位缺陷明显多于O的空位缺陷.     

微锗掺杂直拉单晶硅中的锗-空位复合体

利用第一性原理研究了微锗掺杂直拉单晶硅中的锗和微缺陷的相互作用, 其中微缺陷用一个空位、两个空位和三个空位模拟. CASTEP计算了锗与一个空位、两个空位和三个空位相互作用的情况, 通过分析三种情况下锗与空位(或空位组中心)的间距及空位面积(或体积)的大小, 分别给出了三种情况下最稳定的锗-空位复合体结构模型. 计算表明在微锗掺杂硅单晶中由于锗的引入, 空位容易团聚在锗原子附近, 形成锗-空位复合体.     

纳米Cu3 N薄膜的制备与性能

采用柱状靶多弧直流磁控溅射法,100℃基底温度下在玻璃衬底上制备了纳米氮化铜(Cu3N)薄膜.用x射线衍射研究了不同氮气分压对Cu3N薄膜晶体结构及晶粒尺寸的影响.结果显示薄膜由Cu3N和Cu的纳米微晶复合而成,其中Cu3N纳米微晶具有立方反ReO3结构.通过原子力显微镜对薄膜表征显示,膜表面比较光滑,具有较低的粗糙度.x射线光电子能谱对薄膜表面的成分分析表明,Cu3N薄膜表面铜元素同时以+1价和+2价存在.Cu3N的Cu2p3/2,Cu2p1/2及Nls峰分别位于932.7,952.7和399.9 eV,Cu2p原子自旋-轨道耦合裂分能量间距为20eV.用台阶仪和四探针方法测量了薄膜的厚度及电阻率,薄膜的沉积速率和电阻率在很大程度上受到氮气分压的调制.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.