基于等效介质原理的宽角超材料吸波体的理论分析

目前,很少有文章就如何实现宽角度吸波材料进行详细的理论分析和设计指导,设计宽角度吸波材料仍然是一件很困难的事情.本文基于等效介质理论对带有反射地板的单层介质超材料吸波体进行较为详细的理论分析.从基础电磁理论出发,推导TE波(横电波,电场方向与入射面垂直的平面电磁波)和TM波(横磁波,磁场方向与入射面垂直的平面电磁波)照射下吸波体的反射系数,分析实现宽角度吸波效果所需的等效电磁参数,为宽角度超材料吸波体的设计提供了理论基础.此外,论文还理论分析了实现宽带宽角吸波等效电磁参数所要满足的条件,并做了计算检验.结果表明,当介质等效电磁参数按照特殊曲线随频率发生变化时,理论上能实现宽带宽角的吸波效果.     

Design and realization of magnetic-type absorber with broadened operating frequency band

In this paper, we present an efficient method to obtain absorbers with broadened operating frequency bands. They are accomplished by using the conventional magnetic absorbing materials (MAMs) in the forms of array and mesh structures, which are similar to those in the case of frequency slective surface. The proposed approach is verified not only by simulations but also by experimental results under the normal incidence at microwave frequencies. Moreover, the wideband absorber is lighter than the conventional magnetic absorber. These results indicate that our proposed absorbing structures can be used for designing good electromagnetic absorbers.     

Design and realization of a magnetic-type absorber with a broadened operating frequency band

In this paper, we present an efficient method to obtain absorbers with broadened operating frequency bands. They are accomplished by using conventional magnetic absorbing materials (MAMs) in the forms of array and mesh structures, which are similar to those in the case of a frequency selective surface. The proposed approach is verified not only by simulations but also by experimental results under the normal incidence at microwave frequencies. Moreover, the wideband absorber is lighter than the conventional magnetic absorber. These results indicate that our proposed absorbing structures can be used for designing good electromagnetic absorbers.     

A broadband,polarisation-insensitive and wide-angle coplanar terahertz metamaterial absorber

Broadband terahertz metamaterial absorbers have attracted considerable attention due totheir significant potential for practical applications. These absorbers are usuallystacked in several differently shaped or sized subunits to form a unit cell, making theirfabrication quite troublesome. A simple design for broadband metamaterial absorbers istherefore urgently needed. Herein, we propose a coplanar broadband andpolarisation-insensitive perfect absorber formed by two patterned square metallic ringswith a dielectric layer on top of a metallic ground plane. The full width at half maximum(FWHM) of the device can be up to 42% (with respect to the central frequency), which is 2times greater than that of a single-layered structure. This property is retained well fora very wide range of incident angles. The two patterned square rings resonating atdifferent but similar frequencies leads to the broadband absorption. Moreover, ahybridised resonance model is proposed to analyse the origin of the resonance bandwidth.The results of this metamaterial absorber design appear to be very promising for solarcell, detection and imaging applications.     

New Electromagnetic Absorbers Composed of Left-handed and Right-handed Materials

New double-layered electromagnetic absorbers are presented in this paper. The new absorbers composed of one lossy left-handed material absorbing layer and one impedance matching layer consisted of lossless right-handed material. It is indicated that the reflection loss of below −20dB can be obtained in the frequency range 7GHz–13GHz. Power attenuation achieving −50dB of narrow frequency band electromagnetic absorbers can also be obtained by modulate permittivity of right-handed material. Furthermore, the thickness of the whole absorbing structure is only 2mm, which is particularly helpful in some practical applications. The presented results are of reference significance for accurate design of the new electromagnetic absorbers and of practical prospects for stealth technology.     

Numerical analyses of the sound absorption of three-dimensional MPP space sound absorbers

Because microperforated panels (MPPs) can provide wide-band sound absorption without fibrous and porous materials, they are recognized as next-generation absorption materials. The fundamental absorbing mechanism is Helmholtz-resonance absorption due to the perforations and air-back cavity. Consequently, MPPs are usually placed in front of rigid-back walls. However, one of the authors has proposed MPP space sound absorbers without backing structures. Among these space absorbers, cylindrical MPP space absorbers and rectangular MPP space absorbers are advantageous due to their design flexibility and easy-to-use properties. Although their performances have been investigated experimentally, it is necessary to predict their absorption characteristics to develop improved shapes and efficient designs. Herein their absorption characteristics are numerically predicted using the two-dimensional boundary element method, and the applicability of a numerical method as a design tool to sufficiently predict the performance of MPP space absorbers is discussed.     

一种基于3D打印技术的结构型宽频吸波超材料

设计了一种三层宽频吸波超材料,其表层和中间层为单元尺寸不同的周期阵列结构,底层为吸波平板结构,优化后的总厚度仅为4.7 mm,并采用三维(3D)打印技术成功制备了该吸波超材料.吸波体反射率测试结果表明,在电磁波垂直入射条件下,宽频吸收峰分别出现在5.3和14.1 GHz,两峰叠加使得其在4-18 GHz频率范围内反射损耗均小于-10 dB.采用S参数反演法计算了每一层的等效电磁参数,并利用多层结构反射率公式推导得出该模型的理论反射率,理论计算结果与实测结果基本一致.通过研究能量损耗、电场分布和磁场分布揭示了吸波机理,分析表明该吸波体的宽频吸收效果源于三层结构产生的吸收带宽叠加.本文提出的吸波超材料具有良好的宽频吸收效果,尤其在低频范围吸波性能较佳,结合3D打印快速成型技术,可获得结构精细的三层吸波超材料,具有重要的实际应用价值和广阔的应用前景.     

基于超材料与电阻型频率选择表面的薄型宽频带吸波体的设计

设计了三种类型吸波体, 分别为基于正方形金属贴片(square metal patch, SMP) 结构超材料吸波体、 电阻型频率选择表面(Resistance Frequency Selective Surface, RFSS) 吸波体和SMP与RFSS的复合结构吸波体. 采用FDTD算法分别对这三种类型吸波体的电磁波吸收特性进行数值模拟分析. 模拟得到的结果表明: 在整个2-30 GHz频率范围内, SMP吸波体, 通过几何参数的设计可以实现多频窄带强吸收; RFSS吸波体, 通过方块电阻的设计可以实现高频宽带强吸收, 但强吸收的带宽有限; SMP与RFSS的复合结构吸波体, 在3-25 GHz之间吸收率大于90%以上, 且宽频范围内与自由空间具有较好的阻抗匹配特性.     

Improved sound absorption performance of three-dimensional MPP space sound absorbers by filling with porous materials

Because microperforated panels (MPPs), which can be made from various materials, provide wide-band sound absorption, they are recognized as one of the next-generation absorption materials. Although MPPs are typically placed in front of rigid walls, MPP space sound absorbers without a backing structure, including three-dimensional cylindrical MPP space absorbers (CMSAs) and rectangular MPP space absorbers (RMSAs), are proposed to extend their design flexibility and easy-to-use properties. On the other hand, improving the absorption performance by filling the back cavity of typical MPP absorbers with porous materials has been shown theoretically, and three-dimensional MPP space absorbers should display similar improvements. Herein the effects of porous materials inserted into the cavities of CMSAs and RMSAs are experimentally investigated and a numerical prediction method using the two-dimensional boundary element method is proposed. Consequently, CMSAs and RMSAs with improved absorption performances are illustrated based on the experimental results, and the applicability of the proposed prediction method as a design tool is confirmed by comparing the experimental and numerical results.     

Design of metamaterial surfaces with broadband absorbance

A simple design paradigm for making broadband ultrathin plasmonic absorbers is introduced. The absorber's unit cell is composed of subunits of various sizes, resulting in nearly 100% absorbance at multiple adjacent frequencies and high absorbance over a broad frequency range. A simple theoretical model for designing broadband absorbers is presented. It uses a single-resonance model to describe the optical response of each subunit and employs the series circuit model to predict the overall response. Validity of the circuit model relies on short propagation lengths of the surface plasmons.     

Synthesis, characterization, and microwave absorption properties of Fe-40 wt%Ni alloy prepared by mechanical alloying and annealing

Fe-40 wt%Ni alloys with granular shape and flake shape were prepared by a mechanical alloying (MA) and annealing method. The phase composition and morphology of the FeNi alloys, electromagnetic parameters, and microwave absorbing properties of the silicone rubber composite absorbers filled with the as-prepared FeNi alloy particles were characterized using X-ray diffraction (XRD), scanning electron microscope (SEM) and vector network analyzer. The XRD results indicate that the crystalline structures of the Fe-40 wt%Ni alloys prepared by both one-step and two-step MA processes are face-centered cubic (fcc) Ni (Fe) solid solutions, and the structures can be retained after annealing at 600 °C for 2 h. SEM images show that the FeNi alloy powders for one-step process have a granular shape; however the particles turned into flake form when they were sequentially milled with absolute ethyl alcohol. With the increase in thickness of composite absorber, the reflection loss (RL) decreases, and the peak for minimum reflection loss shifts towards the lower frequency range. Compared to the absorbers filled with the granular FeNi alloy, the absorbers filled with flaky FeNi alloys possess higher complex permittivities and permeabilities and have a lower RL and peak frequency under the same thickness. Microwave absorbing materials with a low reflection loss peak in the range of 1-4 GHz are obtained, and their microwave absorbing properties can be adjustable by changing their thicknesses.     

Broadband and ultra-low reflection metamaterial absorber embedded with magnetic materials

In this study, we design, prepare and characterize a broadband, ultra-low reflectivity and incidence angle-insensitive metamaterial absorber. The design of this absorber not only provides a novel idea for the design of broadband absorbers, but also enhances the application prospects of metamaterial absorbers. By introducing FeSiAlp/epoxy magnetic composite and optimizing the structural parameters, the absorption performance of the metamaterial absorber has been significantly improved. The effective absorption bandwidth (bandwidth with reflectivity less than −10dB) is increased by 3.4 times from 2.19 GHz to 7.49 GHz, and the RL_min (minimum reflection loss) value reaches −38.31 dB at 17.83 GHz, that is the absorption rate reaches 99.99%. Meanwhile, the experimental results also verify the simulation design results. Therefore, the absorber not only plays the characteristics of strong absorption of metamaterial, but also absorbs the advantages of broadband of magnetic material.     

Investigations of the barbell ultrasonic transducer operated in the full-wave vibrational mode

In this paper, the resonance frequency equation and expression of displacement amplitude magnifications of a full-wave barber ultrasonic horn are obtained. By discussing the relationships between the displacement amplitude magnifications and the geometrical dimensions, the optimized design of the horn for the largest magnification is proposed, which is helpful to improve the radiation power and the transfer efficiency of the acoustic energy of the ultrasonic oscillatory system. Based on the optimized design of the horn, we introduced a barbell ultrasonic transducer operated in the longitudinal full-wave vibrational model and obtained the resonance frequency equations. For comparison, the resonance frequencies of the full-wave barbell horn and the full-wave barbell transducer are also analyzed by finite element method (FEM). It is shown that the values obtained by theoretical analysis and FEM are in good agreement with experimental observations. We hope that the research of this paper is helpful for the use of the barbell horn and transducer in the applications such as ultrasonic liquid processing.     

A pure dielectric metamaterial absorber with broadband and thin thickness based on a cross-hole array structure

A pure dielectric metamaterial absorber with broadband and thin thickness is proposed, whose structure is designed as a periodic cross-hole array. The pure dielectric metamaterial absorber with high permittivity is prepared by ceramic reinforced polymer composites. Compared with those with low permittivity, the absorber with high permittivity is more sensitive to structural parameters, which means that it is easier to optimize the equivalent electromagnetic parameters and achieve wide impedance matching by altering the size or shape of the unit cell. The optimized metamaterial absorber exhibits reflection loss below -10 dB in 7.93 GHz-35.76 GHz with a thickness of 3.5 mm, which shows favorable absorption properties under the oblique incidence of TE polarization (±45°). Whether it is a measured or simulated value, the strongest absorbing peak reaches below -45 dB, which exceeds that of most metamaterial absorbers. The distributions of power loss density and electric and magnetic fields are investigated to study the origin of their strong absorbing properties. Multiple resonance mechanisms are proposed to explain the phenomenon, including polarization relaxation of the dielectric and edge effects of the cross-hole array. This work overcomes the shortcomings of the narrow absorbing bandwidth of dielectrics. It demonstrates that the pure dielectric metamaterial absorber with high permittivity has great potential in the field of microwave absorption.     

Design and analysis of an acoustic demultiplexer exploiting negative density,negative bulk modulus and extra-ordinary transmission of membrane-based acoustic metamaterial

A typical membrane-based acoustic metamaterial has been reconfigured into an array of semi-flexi-walled membrane-based Helmholtz resonators to design a novel 4 port device which demultiplexes an incoming broadband acoustic signal into frequency ranges where negative modulus, density and extra-ordinary transmission behaviour exist. It has two ports exhibiting identical transfer functions and for input given in any of these ports, the device operates as a 3 port demultiplexer. The device is asymmetric in its functionality both in its degree of demultiplexing and bandwidths of the demultiplexed spectrum. Theoretical analysis of this acoustic demux is carried out by modelling it as a combination of two independent physical systems and is further validated by full-wave analysis.     

Temporal response of nonlinear transmission in optically thick saturable absorbers and determination of saturable absorption parameters

The temporal response of nonlinear transmission in saturable absorbers is theoretically investigated on the basis of a four-energy-level model including an excited-state absorption, and is experimentally employed for determining saturable absorption parameters in saturable-dye-doped films. The approximation of optically thin absorbers is shown to be inadequate to this end. In theoretical calculations, optically thick saturable absorbers are treated by a set of simultaneous partial differential equations: a rate equation governing the dynamics of population densities of energy levels and a propagation equation governing the propagation of optical fields in the optically thick absorbers. By comparing experimental results with numerical ones, the saturable absorption parameters can be determined on the basis of the intensity dependence of response time. In numerical calculations, the effect of random orientation is also considered for optically anisotropic molecules rigidly fixed in saturable absorbing media. The characterization of the saturable absorption parameters is conducted by using uranine-doped poly(vinyl alcohol) films.     

基于高阻抗表面的多频带Salisbury屏设计

为进一步提高传统Salisbury屏的吸波性能, 本文提出了利用高阻抗表面在特定频率同相反射的特性, 替代原有结构中的金属平板设计多频带Salisbury屏的方法. 通过分析不同频率电磁波经高阻抗表面反射后空间电磁场的场强分布, 说明可以通过共用Salisbury屏的损耗层, 在高阻抗表面同相反射的特征频率附近引入新的吸收带. 以不同尺寸方形周期结构的单频和双频高阻抗表面为例, 从仿真和实验两个方面验证了多频带Salisbury屏设计的可行性, 且实验和仿真结果十分符合. 结果表明, 多频带Salisbury屏基本保留了原有的吸波性能, 同时又引入了新的吸收峰, 吸收峰的位置和数量与高阻抗表面同相反射的频带位置和数目有关. 与传统的Salisbury屏相比, 在材料增加厚度不足1 mm 的情况下, 多频带Salisbury屏的设计使反射率小于-10 dB的吸波带宽由8.5 GHz增加到10.1 GHz, 且实现了向长波方向的拓展, 最低频率由7.5 GHz拓展到5.98 GHz.     

Deformable broadband metamaterial absorbers engineered with an analytical spatial Kramers‐Kronig permittivity profile

Electromagnetic (EM) materials with perfect absorption have long been investigated for their important applications in many practical technologies. The trial‐and‐error method has been mostly employed to achieve this target, either by varying the constituent compositions for traditional natural material absorbers or by running computer simulations for general metamaterial (MM) absorbers. In this work, the authors propose a new method with analytical guidance to build omnidirectional perfect absorbers inspired by the recently proposed spatial Kramers‐Kronig (KK) nonreflecting dielectric profile. The subtle combination of the spatial and time dispersions in the metamaterial‐engineered KK profile gives the desired broadband response property. More importantly, these features remain invariant when the sample is uniformly compressed or stretched with large thickness change, i.e., this particular broadband absorber is deformable, which has been firstly reported in the literature. The current results will pave a new way to design high‐efficiency EM absorbers that could also be extended in general to manipulate waves for other fields or applications.

     

混合谐振模式宽带长波红外超表面吸收器研究

为了满足红外探测器件集成化和对红外宽光谱范围吸收的需求,设计了一种工作在长波红外波段(8~14μm)的超宽带、高吸收、极化不敏感的超材料吸收器。通过在金属-介质-金属三层异质的超材料吸收器结构的顶部金属周围镶嵌一层介质形成超表面,以增加谐振强度和吸收带宽。在8~13.6μm的带宽范围内,该结构有超过90%的平均吸收率,覆盖了大部分长波红外大气窗口波段,对红外探测领域有着重要意义。研究结果表明:镶嵌的金属-介质组成的介质波导模式和谐振腔模式的结合以及传播型表面等离激元模式的激发是形成宽带高吸收的主要原因,并且谐振模式的谐振波长可以通过相关参数来进行调控。本文的研究结果为可调谐宽带长波红外吸收材料的设计提供参考,该设计方法可推广到中波红外波段、甚至长波红外或其它波段。     

Full-Wave Analysis of Inside Cylindrical Microstrip Lines by Finite Element Method

In this paper, a full-wave analysis using finite element method is presented to investigate the dispersion characteristics of inside cylindrical microstrip lines, which are essential to the design of some conformal microstrip circuits in millimeter wave bands. Numerical results of frequency-dependent effective dielectric constants are given for different structural dimensions and dielectric constants of substrate. Some useful conclusions are derived for the design of the special conformal microstrip lines.