Influence of expanding ring roads on traffic noise in Beijing City

The road network in Beijing is expanding in the form of loop-lines. Following the 2nd and 3rd ring roads, the 4th has been completed and come into operation in 2002. Traffic noise surveying and analysis was performed along four main roads in the Beijing urban area—the 2nd, 3rd and 4th ring roads circling the central downtown area and Chang-An Avenue, a major east-west corridor through the heart of the city. Measured noise data along the 2nd, 3rd and Chang-An Avenue were compared with the data surveyed before the completion of the 4th ring road for determining influence of expanding ring roads on traffic noise pattern in Beijing City. The results indicate that these main roads remain overloaded by traffic flow during daytime, and noise levels due to road traffic along these roads exceeds relavent environmental standards by 5 dBA. Reduced traffic noise level was observed along the northern half of the 2nd and 3rd ring roads, and along the central section of Chang-An Avenue. Increased traffic noise level was observed along the southern half of the 2nd and 3rd ring roads, and along the non-central section of Chang-An Avenue. Expanding ring roads mitigate heavy traffic flow in the central part of Beijing City, but spread high traffic noise outwards at the same time.     

A multiple regression model for urban traffic noise in Hong Kong

This article describes the roadside traffic noise surveys conducted in heavily built-up urban areas in Hong Kong. Noise measurements were carried out along 18 major roads in 1999. The measurement data included L10, L50, L90, Leq, Lmax, the number of light vehicles, the number of heavy vehicles, the total traffic flow, and the average speed of vehicles. Statistical analysis using the analysis of variance (ANOVA) and Tukey test (p<0.05) reveals that the total traffic flow and the number of heavy vehicles are the most significant factors of urban traffic noise. Multiple regression was used to derive a set of empirical formulas for predicting L10 noise level due to road traffic. The accuracy of these empirical formulas is quantified and compared to that of another widely used prediction model in Hong Kong--the Calculation of Road Traffic Noise. The applicability of the selected multiple regression model is validated by the noise measurements performed in the winter of 2000.     

An environmental noise study in the city of Cáceres, Spain

An urban noise survey was conducted in the city of Cáceres (Extremadura, Spain). In order to select the different points where measurements were to be taken, the streets were classified according to their use in communicating the different zones of the city. The four categories considered were all through roads (service roads were excluded): arterial roads outside the central zone, arterial roads in the central zone, other two-way roads connecting different zones, other one-way roads. The first two categories were found to be statistically indistinguishable, and together with the third had the highest noise levels—median Leq above 70 dB(A). The one-way roads were some 5 dB(A) quieter. Thus the sound levels in Cáceres, a small city, are quite high, with 90% of our measurements surpassing an Leq of 65 dB(A) during working hours. Finally, relationships were established between the equivalent level, traffic flux, and the main noise level percentiles, with results in good agreement with those of other authors. We can also conclude that city noise can be usefully studied by classifying the streets according to their use.     

Testing the acoustical corrections for reflections on a façade

The assessment of noise levels, in the proximity of a building or on its façade, is a requirement of the European Environmental Noise Directive 2002/49/EC concerning environmental noise produced by road and railway traffic, airports and industries. The corrected values for the noise levels and the problems of measuring noise near a façade are discussed here for the case of road traffic. A complete set of measurements in different situations was performed along several roads in an urban environment as well as in a controlled situation using a loudspeaker. The experimental results are then compared against theoretical models and international standards, in particular those that suggest to use a +3 or +6 dB correction as a function of the microphone position and the NordTest method. Some suggestions are given for the different corrective factors to apply when measuring environmental noise between 0 and 2 m away from a building façade, and practical solutions identified.     

城市快速路系统的元胞自动机模型与分析

使用元胞自动机模型研究包含出入匝、主路和辅路的城市快速路系统的交通问题,为不同类型的路段定义了三种不同的换道规则.模拟结果表明,高入匝流量容易导致主路、匝道及其上游出现拥堵,高出匝流量容易使匝道出口车流与辅路内侧道车流发生冲突.入匝流量比较高时,主辅路为双车道的系统可以延缓交通拥堵和减少通行时间;当入匝流量较低时,双车道改善了单车道下辅路的通行状况. 关键词： 交通流 元胞自动机 换道规则 匝道     

Prediction and Limitations of Noise Maps Developed for Heterogeneous Urban Road Traffic Condition: A Case Study of Surat City,India

Road traffic noise pollution has been recognized as a serious issue which affects human health as well as affects urban regions. Noise maps are very beneficial to identify the impact of noise pollution. A noise mapping study performed to study the propagation of noise in tier-II city along with field measurements. The noise maps are developed using a computer simulation model (SoundPLAN essential 4.0 software). The noise prediction models like U.K’s CoRTN, Germany’s RLS-90, and their modified versions, which can be used for homogenous road traffic conditions, cannot be successfully applied in heterogeneous road traffic conditions of India. In developing country like India, road traffic noise pollution depends on the composition of heterogeneous traffic volume, variance in road geometrical, honking conditions, un-authorized parking, and varying density of the building on either side of the road. These traffic compositions contain vehicles, which have different sizes, speeds variations, a different dimension of vehicles. Because of fluctuating speeds, lack of lane disciplines, and un-authorized parking on main road lanes, honking events becomes inevitable, which changes and affects the urban soundscape of nations like India. Analysis of noise maps showed that horn honking due to un-authorized parked vehicles contributed an additional increase up to 11 dB (A) noise, which is quite significant.     

Evaluation and analysis of the environmental noise of Messina, Italy

In this paper, the results of a study on the environmental noise pollution of the city of Messina (Italy) are presented. The investigation has included a preliminary classification of the territory in six acoustically homogeneous areas according to Italian noise regulations. On the basis of the resultant acoustic zoning 35 sites were selected for an experimental survey. This last has been carried out by extensive measurements of the main indexes for noise pollution (L_eq, L₁, L₁₀, L₅₀, L₉₀, L₉₉) and of the traffic flow and composition. Results indicate that: (a) main roads of Messina are overloaded by traffic flow during day-time period and that in all the examined sites daily average sound levels due to road traffic exceed environmental standards by about 10 dBA; (b) environmental noise exhibits a certain degree of spatial variance resulting primarily from the peculiar geo-morphological structure of the town and from the transport infrastructure and (c) more than 25% of residents should be highly disturbed by road traffic noise.     

A simple formula for evaluating the acoustic effect of balconies in protecting dwellings against road traffic noise

This study explores the noise reducing effect of a balcony and describes the development of a simple theory pertaining to the propagation of traffic noise from a road into a balcony. A new methodology is proposed that is based on the well-known prediction scheme—“Calculation of Road Traffic Noise” (CRTN)—developed in the UK. A geometrical ray theory is developed for the prediction of noise levels inside a balcony due to road traffic. The source level of road traffic noise is obtained as per the standard CRTN methodology. However, road sub-segmentations and new approaches for the prediction of noise levels at illuminated and shadow zones inside a balcony are proposed. Field measurements have been conducted on four different types of balcony to validate the proposed methodology. The insertion loss, defined as the difference in the noise levels with and without the presence of a balcony, has been used to assess the shielding effectiveness of a balcony against road traffic noise. The simple theory is validated by outdoor field measurements. It is also found that a properly designed balcony can provide considerable screening effects in protecting dwellings against road traffic noise.     

The relationship between traffic noise and insomnia among adult Japanese women

To clarify the relationship between traffic noise and insomnia, the authors conducted a survey and measured the actual sound level of noise in an urban area. Questionnaires were distributed to adult women who lived within 150 m from two major roads and were completed by 648 of the 1286 subjects (50.4%). The area was divided into three zones according to distance from the road (more than 50, 20-50 and 0-19.9 m). Fifty-seven subjects (8.8%) were classified as having insomnia. Average values of sound level at distances of 20, 50, and 100 m from the major road were L_eq 64.7, 57.1, and 51.8 dBA, respectively. Overall, there were no significant differences among the three zones in the prevalence of insomnia and no association between distance from the road and insomnia. However, the result from a sub-data set of the subjects who lived in the areas that showed decreasing noise level as the distance from the main road increased showed that distance from the road was associated with insomnia. This study suggests that researchers should consider the actual traffic situation and its sound level in epidemiological studies about the effects of traffic noise on insomnia.     

Motorway noise modelling based on perpendicular propagation analysis of traffic noise

A model for motorway traffic noise has been obtained from measurements along the the Bangkok-Chonburi motorway. The model’s parameters include traffic volume and combination, the average spot speed of each type of vehicle and the physical conditions of the motorway in terms of right-of-way width, number of lanes, lane width, shoulder width, and median width for both of the main carriageways and frontage roads. The noise level that is generated by each type of vehicle has been analyzed according to the propagation in the direction perpendicular to the center line of motorway’s carriageway. The total traffic noise is then analyzed from traffic volume of all vehicle types on both sides of carriageways and frontage roads. The basic noise levels used in the motorway traffic noise model are modified according to the effective ground effect along the propagation path. The final result of this study is that a motorway traffic noise model based on the perpendicular propagation analysis technique performs well in a statistical goodness-of-fit test against the field data, and therefore, can be used effectively in traffic noise prediction for related or similar motorway projects.     

Comparison of dose-response relationships between railway and road traffic noises: the moderating effect of distance

It has been found in European studies that railway noise causes less annoyance than road traffic noise. However, recent Japanese studies have shown that there is no systematic difference in dose-response relationships between railway and road traffic noises. In general Japanese houses are situated closer to railways or roads than European houses. The purpose of the study was to investigate whether the distance from noise source to houses influences community responses to railway and road traffic noises. A re-analysis was made of data from social surveys on community responses to railway and road traffic noises, which have been obtained from 1994 to 2001 in Kyushu, a warmer area of Japan and Hokkaido, a colder area. The results showed that the annoyance in areas close to railways was greater than that in distant areas, while there was no difference in dose-response relationships for road traffic noise between both areas. Considering the situation of houses in Europe and Japan, it is expected that the annoyance caused by railway noise is more severe in Japan than in Europe. The distance from noise source to houses may be one of the causes of the difference in community responses between Europe and Japan.     

The differing annoyance levels of rail and road traffic noise

The results of a study on the relative annoyance by rail or road traffic noise in urban and rural areas are reported. Fourteen areas with rail and road traffic noise with differing levels of loudness (L_eq) were investigated. The annoyance was assessed by means of a questionnaire. The analysis of the relationship between annoyance and L_eq—performed separately for rail and road traffic noise—shows that the same amount of annoyance is reached for railway traffic noise at L_eq levels 4–5 dB(A) higher than for road traffic noise (railway/traffic noise “bonus”). The estimation for the difference values vary for the different variables of annoyance. Furthermore, the difference levels tend to be higher in urban than in rural areas.     

Properties of Phase Transition of Traffic Flow on Urban Expressway Systems with Ramps and Accessory Roads

In this paper, we develop a cellular automaton model to describe the phase transition of traffic flow on urban expressway systems with on-off-ramps and accessory roads. The lane changing rules are given in detailed, the numerical results show that the main road and the accessory road both produce phase transitions. These phase transitions will often be influenced by the number of lanes, lane changing, the ramp flow, the input flow rate, and the geometry structure.     

Investigation of the dose-response relationship for road traffic noise in Assiut, Egypt

A field study has been carried out in urban Assiut city, Egypt. The goals of this study are: (1) to carry out measurements to evaluate road traffic noise levels, (2) to determine if these levels exceeds permissible levels, (3) to examine people’s attitudes towards road traffic noise, (4) to ascertain the relationship between road traffic noise levels and degree of annoyance. The measurements indicate that traffic noise noise levels are higher than those set by Egyptian noise standards and policy to protect public health and welfare in residential areas: equivalent continuous A - weighted sound pressure levels (L_A eq) = 80 dB and higher were recorded, while maximum permissible level is 65 dB. There is a strong relationship between road traffic noise levels and percentage of highly annoyed respondents. Higher road traffic noise levels mean that the percentage of respondents who feel highly annoyed is also increased.     

Effects of urban morphology on the traffic noise distribution through noise mapping: A comparative study between UK and China

Due to the rapid urban development and massive population increase in many eastern cities, the difference in urban density and morphology between typical western and eastern cities is becoming significant. This consequently makes the noise distribution in the eastern cities rather different from typical low density European cities. In this research, two representative cities with different urban densities, Greater Manchester in the UK and Wuhan in China, were selected, which have low and high average urban density respectively, and also have considerable differences in building form and traffic pattern. In the mean time, these two cities have similar urban scale and traffic amount. In each city, based on the urban morphological analyses considering urban land-use, building and road density, and noise source distribution, a number of typical urban areas, 500 * 500 m² each, were sampled. A noise-mapping software package was then used to generate generic noise maps, based on existing digital vector maps for terrain and building, and traffic data obtained by on-site measurements. The comparison results show that the average and minimum noise level in Greater Manchester samples is generally higher than that in Wuhan samples, while the maximum noise level in Wuhan samples is mostly higher. By developing a Matlab program, correlations have been analysed between noise distributions and the urban characteristics relating to urban density, such as the road and building coverage ratio. Overall, comparisons between these two typical cities have shown significant effects of urban morphology on the traffic noise distribution.     

Influence of the automotive Start/Stop system on noise emission: Experimental study

One of the most common environmental impacts of road transportation is the traffic noise. Linked to this, Start/Stop is a technology which has demonstrated to save fuel by powering off the engine when the vehicle is stopped, such as in front of a traffic light, and restarting the engine instantly when the driver pushes back the pedal brake to proceed. The technology helps also to reduce the CO₂ emission, playing a key role in a way to accomplish stringent emission norms for vehicle manufacturer. However, we are not sure whether it reduces the noise emission and how much? Thus, the main aim of this work is to assess the engine noise emissions of a vehicle incorporating a Start/Stop system in urban traffic, and compare it with those radiated by the mean traffic stream. Experimental results demonstrate that there are no contributions of the Start/Stop system to reduce meaningfully the engine noise in urban traffic.     

Spatial statistical analysis of the effects of urban form indicators on road-traffic noise exposure of a city in South Korea

The purpose of this study is to present a statistical model which can predict the noise level of road-traffic in urban area. A spatial statistical model which can take into account spatial dependency on geographically neighboring areas is constructed from a noise map of a city in South Korea. A system of 250 m × 250 m grid cells is placed on the city of Cheongju, South Korea, and the noise level and urban form indicators are averaged over each cell. The population-weighted mean of the noise level is subsequently regressed on the average urban form by adopting the spatial autoregressive model (SAR) and the spatial error model (SEM), as well as an ordinary least squares (OLS) model. Direct and indirect impacts are analyzed for a valid interpretation of the spatial statistical models. Factors such as GSI, FSI, traffic volume, traffic speed, road area density, and the fraction of industrial area turn out to have significant impacts on the noise level.     

Environmental acoustic quality in Jeddah urban sites

Surveys of physical exposure to noise at urban sites in Jeddah city indicate that noise from road traffic is very intensive. Relatively high instant sound levels (90 dB(A) and higher) were recorded on a numbr of congested, as well as freely-flowing traffic, roads. Values of the statistical indicators $\text{L}{}_{\mathrm{<mtext>10</mtext>}}$, $\text{L}{}_{\mathrm{<mtext>50</mtext>}}$, $\text{L}{}_{\mathrm{<mtext>90</mtext>}}$ and $\text{L}{}_{\mathrm{<mtext>dn</mtext>}}$ were determined for indoor domestic noise and comparisons with current western standards show that the levels determined exceeded the limits of dissatisfaction given by those standards. Overall sound pressure levels measured inside typical university offices indicate that the presence of individual room-units of air-conditioning impairs the acoustic quality in those environments. The results of a social survey on noise perception in residential areas are in good agreement with the above findings, indicating that 89 per cent of people interviewed were substantially disturbed by traffic noise. The results of this research, however, demonstrate the necessity for the application of a traffic noise control programme on Jeddah main roads and also the need for attention to be paid to the indoor acoustic quality of homes and offices.     

Blind separation to improve classification of traffic noise

In order to apply noise mapping to traffic noise prediction, a knowledge of several information about traffic characteristics is required to predict the noise levels emitted by the roads involved. In the European case, the CNOSSOS-EU calculation method for traffic-noise level prediction is now under discussion, to be agreed in response to the European Directive relating to the Assessment and Management of Environmental Noise (2002/49/EC). In this application context, standard ISO 1996-2:2007 Determination of Environmental Noise Levels, in its Section 6.2, specifically mentions that during L_eq measurements of road traffic noise the number of vehicle pass-bys shall be counted during the measurement time interval. This information is often not available in many roads, so it is typically registered by means of casual counts, often through manual procedures. Besides, if the measurement result is converted to other traffic conditions, a categorization of the vehicles involved is also required. Some additional information, such as the traffic density and the average speed, should be registered if a calculation method is used to build a noise map.In this paper a new automatic classification system of traffic noise covering these requirements is presented. The portable system processes a two channel audio recording to provide information of the average speed and the number of vehicles, which are classified in six categories during the measurement period. After several evaluations of the possibilities to get a good classification of the noise emission of a road from audio recordings, it is shown that increasing the within-class separation, as well as introducing a novel BSS–PCA-based classifier, the precision achieved in the final results is substantially improved.     

信号灯控制下的主道双车道入匝道系统交通流特性研究

采用元胞自动机模型研究了具有信号灯控制的主道为双车道的入匝道系统交通流特性.将信号灯设置在入匝道口处,通过信号灯来引导主道和匝道上的车辆通行.分析了信号灯控制对主道与匝道的车流量、系统通行能力以及入匝道口处的车流平均速度的影响.通过相图比较,说明信号灯控制的双车道入匝道系统能模拟出比信号灯控制的单车道入匝道系统更加符合实际的交通流特性.与姜锐提出的模型［Jiang R 2003 J. Phys. A 36 11713］结果相比,信号灯控制下的匝道系统的交通流状态得到改善并且道路通行能力有所提 关键词： 交通流 元胞自动机 入匝道系统 信号灯