稀土元素Gd掺杂BiFeO3的第一性原理研究

采用基于密度泛函理论的局域自旋密度近似加U法（LSDA+U:Hubbard参数）计算了多铁材料BiFeO3铁电相以及稀土元素Gd掺杂BiFeO3材料的能带结构、态密度（DOS）、原子轨道占据数和净电荷分布等,对稀土元素Gd掺杂BiFeO3可能引起的电子结构、介电常数和铁磁性的改变进行了第一性原理研究。计算结果表明：Gd掺杂对材料钙钛矿结构影响不大,BiFeO3铁电性主要来源于Fe原子3d轨道和O原子2p轨道杂化;掺杂Gd后材料中的Fe原子和O原子的共价性减弱,Bi原子和O原子的离子性增强,禁带宽度变窄,绝缘性减弱,铁磁性明显增强;计算得到的光学性质表明材料的静态介电常数有所增加。     

BiFeO3电子结构的第一性原理研究

采用广义梯度近似下的密度泛函理论计算了铁电相BiFeO3以及顺电相BiFeO3的轨道占据数、电子云重叠布居数、净电荷分布和态密度.结果表明,BiFeO3晶体现铁电性的主要原因是:Fe原子的3d轨道和O原子的2p轨道杂化.而且由于两相晶体结构上的差异,铁电相BiFeO3原子间的共价性和离子性相对顺电相BiFeO3增强了,态密度图在价带区基本相同,但是在导带区具有一定的差异性.     

Gd和Ti共掺杂对BiFeO_3矫顽力和剩余磁矩的影响(英文)

通过快速液相烧结法制备了BiFeO3、Bi0.9Gd0.1FeO3和Bi0.9Gd0.1Fe0.95Ti0.05O3(BGFTO)块材.x射线衍射和拉曼散射光谱表明Gd和Ti共掺杂后的BGFTO样品产生结构相变.共掺杂样品BGFTO室温下的铁磁性得到显著提高,矫顽力达到1.51T,剩余磁矩为0.175emu/g.磁性得到显著提高的根本原因是共掺杂引起元素替换导致了体系中的螺旋磁结构被抑制.A位和B位共掺杂是引发BiFeO3自发磁化的最有效的方法.     

Cr掺杂ZnO纳米线电子性质和磁性质

本文采用第一性原理密度泛函理论系统的研究了Cr原子单掺杂和双掺杂两种尺寸ZnO纳米线的电子性质和磁性质.所有掺杂纳米线的形成能都比纯纳米线的形成能低,表明掺杂增强了纳米线的稳定性.研究发现Cr原子趋于替代纳米线表面的Zn原子.所有掺杂纳米线都显示了金属性.纳米线的总磁矩主要来源于Cr原子3d轨道的贡献.由于杂化,相邻的O原子和Zn原子也产生了少量自旋.在超原胞内,Cr和O原子磁矩反平行排列,表明它们之间是反铁磁耦合.表面双掺杂纳米线铁磁态能量比反铁磁态能量低149 meV,表明Cr掺杂ZnO纳米线可能获得室温铁磁性.     

氯化四苯基铁卟啉和氯化四全氟代苯基铁卟啉的密度泛函研究

用密度泛函B3LYP／STO-3G*和B3LYP／6-31G*方法对血红素模拟物分子铁卟啉分子Fe(TPP)Cl和Fe(TPPF20)Cl进行了几何结构优化和单点能量计算,对它们的分子轨道、电荷密度和自旋密度分布做了详细分析．数据表明,有部分自旋电子由Fe原子向卟啉环转移,同时有部分自旋与Fe原子3d轨道上单电子自旋相反的电子由卟啉环向Fe原子迁移．两个铁卟啉分子的最高占有轨道结构相似,电子和自旋在卟啉环与Fe原子之间的转移是由于Fe-卟啉环间的π键和σ键相互作用引起的,氯化四全氟代苯基铁卟啉分子中的这种转移更强一些、稳定性更强一些．另外,还根据分子轨道对称性讨论了催化活化分子O2的机理．     

过渡金属掺杂氧化锌团簇的物性研究

本文采用第一性原理密度泛函理论研究了过渡金属（TM）原子Cr和Fe单掺杂和双掺杂(ZnO)12团簇的结构和磁性质。我们考虑了替代掺杂和间隙掺杂。结果表明Cr 和 Fe间隙掺杂团簇结构最稳定。团簇磁矩主要来自TM原子3d态的贡献,4s 和4p 态也贡献了一小部分磁矩。由于轨道杂化,相邻的Zn和O原子上也产生少量自旋。最近邻TM原子间的磁性耦合,主要由两个TM原子之间的直接短程铁磁耦合和TM和O原子之间通过p-d杂化产生的反铁磁耦合这两种相互作用的竞争来决定。不同TM原子掺杂团簇的总磁矩与TM原子种类以及掺杂位置有关,说明在(ZnO)12团簇中掺杂不同TM原子在可调磁矩的磁性材料的领域有潜在应用价值。     

Gd掺杂ZnO纳米线磁耦合性质的第一性原理研究

本文利用基于密度泛函理论的第一性原理方法计算了钆(Gd)掺杂氧化锌(ZnO)纳米线的磁耦合特性. 讨论了两个Gd原子替换ZnO纳米线中不同位置Zn原子的各种可能情况. 计算发现, ZnO中掺杂的Gd原子处于相邻的位置时它们之间的相互作用是铁磁性的, 并且体系的铁磁性可以通过注入合适数目的电子来得到加强. 同时发现Gd掺杂ZnO纳米线后s-f耦合作用变得显著, 使得体系的铁磁性变得更加稳定, 这也是Gd掺杂ZnO纳米线呈现铁磁性的原因. 这些结果为实验上发现的Gd掺杂ZnO纳米线呈铁磁性提供了理论依据.     

Fe掺杂单壁ZnS纳米管磁性质

采用第一性原理密度泛函理论系统研究Fe原子掺杂单壁ZnS纳米管的结构和磁性质.首先比较掺杂纳米管的稳定性.结果表明,掺杂纳米管的形成能比纯纳米管的形成能低,说明掺杂过程是一个放热反应.单掺杂纳米管的总磁矩等于掺杂的磁性原子的磁矩,主要来自Fe原子3d态的贡献.Fe原子掺杂单壁ZnS纳米管趋向于反铁磁态.为了得到稳定的铁磁态,用一个C原子替代掺杂体系中的一个S原子.计算发现铁磁态的能量比亚铁磁态低0.164 eV的.在铁磁态和反铁磁态之间存在的巨大的能量差,表明此掺杂体系可能获得室温铁磁性.     

3d过渡金属Co掺杂核壳结构硅纳米线的第一性原理研究

基于密度泛函理论的第一性原理计算,研究了横截面为五边形和六边形的核壳结构硅纳米线的过渡金属Co原子替代掺杂.通过比较形成能发现,核心位置掺杂、壳层单链掺杂以及外壳层全替代掺杂的硅纳米线都具有稳定性,其中核心位置掺杂结构的稳定性最高.掺杂体系均呈现金属性,随着掺杂浓度的增加,电导通道数增加.Co原子掺杂的硅纳米线呈现铁磁性,具有磁矩.Bader电荷分析表明,电荷从Si原子转移至过渡金属Co原子.与自由态时过渡金属Co原子的磁矩相比,体系中Co原子的磁矩有所降低,这主要是由Co原子4s轨道向3d/4p轨道的电荷转移以及4s,3d,4p的上自旋电子转移至下自旋导致的.     

氮掺杂（1120）ZnO薄膜磁性质研究

采用基于密度泛函理论（DFT）和局域密度近似（LDA）的第一性原理分析了氮掺杂（1120）ZnO薄膜的磁性质.首先,研究了一个N原子掺杂ZnO薄膜的磁性质,结果表明N2p,O2p和Zn3d发生自发自旋极化.其次,研究了二个N原子掺杂ZnO薄膜的磁性质,9个不同几何结构的计算结果表明N原子之间具有FM耦合稳定性,而且具体分析了N掺杂ZnO铁磁稳定性的产生原因.最后,讨论了氮掺杂ZnO磁交换系数和居里温度.计算结果表明N掺杂（1120）ZnO薄膜具有弱铁磁性.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.