Core/shell structured ZnO/SiO2 nanoparticles: Preparation, characterization and photocatalytic property

ZnO nanoparticles were prepared by a simple chemical synthesis route. Subsequently, SiO₂ layers were successfully coated onto the surface of ZnO nanoparticles to modify the photocatalytic activity in acidic or alkaline solutions. The obtained particles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectrometry (EDS) and zeta potential. It was found that ultrafine core/shell structured ZnO/SiO₂ nanoparticles were successfully obtained. The photocatalytic performance of ZnO/SiO₂ core/shell structured nanoparticles in Rhodamine B aqueous solution at varied pH value were also investigated. Compared with uncoated ZnO nanoparticles, core/shell structured ZnO/SiO₂ nanoparticles with thinner SiO₂ shell possess improved stability and relatively better photocatalytic activity in acidic or alkaline solutions, which would broaden its potential application in pollutant treatment.     

Synthesis and photoluminescence properties of SnO2/ZnO hierarchical nanostructures

SnO₂/ZnO hierarchical nanostructures were synthesized by a two-step carbon assisted thermal evaporation method. SnO₂ nanowires were synthesized in the first step and were then used as substrates for the following growth of ZnO nanowires in the second step. Sn metal droplets were formed at the surfaces of the SnO₂ nanowires during the second step and were acted as catalyst to facilitate the growth of ZnO nanowires via vapor-liquid-solid mechanism. Room temperature photoluminescence measurements showed that the SnO₂/ZnO hierarchical nanostructures exhibited a strong green emission centered at about 520 nm and a weak emission centered at about 380 nm. The emissions from the SnO₂ were drastically constrained due to screen effect caused by the ZnO layer.     

Hierarchical ZnO/Bi2O3 nanostructures: synthesis, characterization, and electron-beam modification

Two types of ZnO/Bi₂O₃ nanonecklace heterostructures were fabricated using the vapor-phase transport (VPT) method for the first time. These hierarchical structures were well characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with energy dispersive spectroscopy (EDS) attached. The growth mechanism of the novel structures were proposed based on these characterizations. Electron-beam irradiation was found to be a powerful and controllable tool in further tailoring such ZnO/Bi₂O₃ nanonecklace heterostructures. In addition, photoluminescence (PL) emission from the hierarchical nanostructures showed enhancement comparing to the pure Bi₂O₃ powder.     

Growth of hierarchical based ZnO micro/nanostructured films and their tunable wettability behavior

Hierarchical zinc oxide (ZnO) micro/nanostructured thin films were grown onto as-prepared and different annealed ZnO seed layer films by a simple two step chemical process. A cost effective successive ionic layer adsorption and reaction (SILAR) method was employed to grow the seed layer films at optimal temperature (80 °C) and secondly, different hierarchical based ZnO structured thin films were deposited over the seed layered films by chemical bath deposition (CBD). The influence of seed layer on the structural, surface morphological, optical and wettability behavior of the ZnO thin films were systematically investigated. The XRD analysis confirms the high crystalline nature of both the seed layer and corresponding ZnO micro/nanostructured films with a perfect hexagonal structure oriented along (0 0 2) direction. The surface morphology revels a complex and orientated hierarchical based ZnO structured films with diverse shapes from plates to hexagonal rod-like crystal to tube-like structure and even much more complex needle-like shapes during secondary nucleation, by changing the seed layer conditions. The water contact angle (WCA) measurements on hierarchical ZnO structured films are completely examined to study its surface wettability behavior for its suitability in future self-cleaning application. Photoluminescence (PL) spectra of the ZnO structured film exhibit UV and visible emissions in the range of 420-500 nm. The present approach demonstrates its potential for low-temperature, large-scale, controlled synthesis of crystalline hierarchical ZnO nanostructures films.     

Zno纳米粒子在PS中空微反应器中的合成与光学性能

通过种子乳液聚合合成核壳结构的聚甲基丙烯酸甲酯/聚苯乙烯(PMMA/PS)复合微球,通过酸碱溶胀法进一步制备出次微米级的PS中空微球. 将此中空微球作为微反应器,使在ZnO纳米粒子前驱体溶液中溶胀, 最终ZnO纳米粒子在PS中空微球中原位生成. 实验表明, 组成ZnO纳米粒子前驱体溶液的两种组 分(CH₃COO)₂Zn和LiOH的滴加顺序不同对最终生成的ZnO纳米粒子的尺寸和负载效率有很大的影响,但并不改变ZnO纳米粒子的晶型. 复合物的光致发光和UV-Vis吸     

Synthesis and performance of core-shell structured ZnO/In2O3 composites in situ growth

Core-shell structured ZnO/In₂O₃ composites were successfully synthesized via situ growth method. Phase structure, morphology, microstructure and property of the products were investigated by X-ray diffraction (XRD), TG-DTA, field emission scanning electron microscopy (FESEM), energy-dispersive spectrometry (EDS), transmission electron microscope (TEM) and photoluminescence (PL). Results show that the core-shell structures consist of spindle-like ZnO with about 800 nm in length and 200 nm in diameter, and In₂O₃ particles with a diameter of 50 nm coated on the surface of ZnO uniformly. HMTA plays an important role in the formation of core-shell structures and the addition of In₂O₃ has a great effect on PL spectrum. Possible mechanism for the formation of core-shell structures is also proposed in this paper.     

Co3O4-ZnO hierarchical nanostructures by electrospinning and hydrothermal methods

A new hierarchical nanostructure that consists of cobalt oxide (Co₃O₄) and zinc oxide (ZnO) was produced by the electrospinning process followed by a hydrothermal technique. First, electrospinning of a colloidal solution that consisted of zinc nanoparticles, cobalt acetate tetrahydrate and poly(vinyl alcohol) was performed to produce polymeric nanofibers embedding solid nanoparticles. Calcination of the obtained electrospun nanofiber mats in air at 600 °C for 1 h, produced Co₃O₄ nanofibers with rough surfaces containing ZnO nanoparticles (i.e., ZnO-doped Co₃O₄ nanofibers). The rough surfaced nanofibers, containing ZnO nanoparticles (ZnNPs), were then exploited as seeds to produce ZnO nanobranches using a specific hydrothermal technique. Scanning electron microscopy (SEM), and transmission electron microscopy (TEM) were employed to characterize the as-spun nanofibers and the calcined product. X-ray powder diffractometery (XRD) analysis was used to study the chemical composition and the crystallographic structure.     

Structural and electrical properties of VO2/ZnO nanostructures

We examined the structural and electrical properties of uniformly-oriented VO₂/ZnO nanostructures. VO₂ was deposited on ZnO templates by using a direct current-sputtering deposition. Scanning electron microscope and transmission electron microscope measurements indicated that b-oriented VO₂ were uniformly crystallized on ZnO templates with different lengths. VO₂/ZnO formed nanorods on ZnO nanorods with length longer than 250 nm. X-ray absorption fine structure at the V K edge of VO₂/ZnO showed M₁ and R phases of VO₂ at 30 and 100 °C, respectively, suggesting structural-phase transition occurring between the two temperatures. Temperature-dependent resistance measurements of VO₂/ZnO nanostructures revealed metal-to-insulator transition at 65 °C and 55 °C during a heating and a cooling, respectively, regardless of ZnO length. Asymmetry behavior of resistance curves from VO₂/ZnO nanostructure during a heating and a cooling was attributed from a strong bond of VO₂ and ZnO.     

Sonochemical synthesized BaMoO4/ZnO nanocomposites as electrode materials: A comparative study on GO and GQD employed in hydrogen storage

Due to poor rate proficiency and electrochemical capacity of transition metal oxides, production electrode materials as operative way to develop the electrochemical performance is a crucial strategy to make sure the great electroactive sites and fast electron/ion diffusion route. In order to solve this problem, carbon-based nanocomposites as conductive substrates are applied. The nanostructured BaMoO₄/ZnO was produced by sonochemical method in the presence of tween 20 as stabilizing agent. Effect of graphene quantum dots (GQDs) and graphene oxide (GO) for developing hydrogen capacity of BaMoO₄/ZnO was studied by providing representative composites of BaMoO₄/ZnO-GQDs and BaMoO₄/ZnO-GO. For this purpose, GQDs was synthesized using green source of Spiraea crenata and the GO provided by commercial company. The structural analysis shows preparation of scales-like morphology of BaMoO₄/ZnO without any impurities through SEM, TEM, XRD, EDS and FT-IR characterization data. Also, the specific surface area for BaMoO₄/ZnO-GQDs (11 m²/g) and BaMoO₄/ZnO-GO (124 m²/g) nanocomposites increased by comparing to BaMoO₄/ZnO (9.1 m²/g). The resultant nanocomposites used as new active compounds for applying in hydrogen storage strategies using cyclic voltammetry and chronopotentiometry tests. Comprehensively, the hydrogen capacitance after 15 cycles was demonstrated on the nanostructured BaMoO₄/ZnO about 129 mAhg⁻¹. It demanded the maximum capacitance for BaMoO₄/ZnO-GQDs and BaMoO₄/ZnO-GO nanocomposites were 284 and 213 mAhg⁻¹ respectively, which was higher than the initial nanostructured BaMoO₄/ZnO. It was exposed from the carbon based structured that; the endorsed electrochemical hydrogen storage (EHS) performance is ascribed to the reaction of the redox pair of Mo⁶⁺ /Mo⁵⁺ at the active sites throughout the EHS procedure. This study delivers a novel plan and potential sorption electrode materials to progress the intrinsic action of conductive compounds.     

Effect of KOH molarity and annealing temperature on ZnO nanostructure properties

In this work, ZnO nanorods (NRs) were fabricated using a low cost chemical bath deposition (CBD) method. The effect of the potassium hydroxide concentration on the fabricated ZnO nanostructures was studied in depth. The optical, structure, and surface morphology properties of the fabricated ZnO nanostructures were investigated using Uv-vis spectroscopy, XRD, and SEM. The results indicate that the formation of hexagonally structured ZnO nanorods with different lengths and diameters was dependent on the KOH concentration. The sample prepared with 2 M of KOH was the best one for optoelectronic applications, since it has the smallest diameters. This sample was annealed at different temperatures (473 K–1073 K). Positron Annihilation Lifetime Spectroscopy was used to determine the defects in the ZnO nanorods. The results show that the positron mean lifetime (τ_m) decreased as the annealing temperature increased, which means that the overall defects in the ZnO nanorods decreased with increasing temperature. Consequently, higher performance semiconductor devices based on ZnO nanorods could be fabricated after high annealing of the ZnO nanorods.     

Dependences of the surface and the optical properties on the O2/O2 + Ar flow-rate ratios for ZnO thin films grown on ZnO buffer layers

ZnO active layers on ZnO buffer layers were grown at various O₂/O₂ + Ar flow-rate ratios by using radio-frequency magnetron sputtering. Atomic force microscopy images showed that the surface roughnesses of the ZnO active layers grown on ZnO buffer layers decreased with decreasing O₂ atmosphere, indicative of an improvement in the ZnO surfaces. The type of the ZnO active layer was n-type, and the resistivity of the layer increased with increasing O₂ atmosphere. Photoluminescence spectra from the ZnO active layers grown on the ZnO buffer layers showed dominant peaks corresponding to local levels in the ZnO energy gap resulting from oxygen vacancies or interstitial zinc vacancies, and the peak positions changed significantly with the O₂/O₂ + Ar flow rate. These results can help improve understanding of the dependences of the surface and the optical properties on the O₂/O₂ + Ar ratio for ZnO thin films grown on ZnO buffer layers.     

Solvothermal synthesis and magneto-optical properties of Zn1−xNixO hierarchical microspheres

Zn_1−xNi_xO (x=0-0.25) hierarchical microspheres were synthesized via a solvothermal process in ethylene glycol. The magnetic microspheres were characterized by X-ray powder diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectra, X-ray photoelectron spectroscopy, room-temperature photoluminescence spectra, and vibrating sample magnetometer. The as-prepared samples take on a well-defined spherical architecture following the processes of spontaneous aggregation and localized Ostwald ripening. Dependence of the magnetization and morphology on Ni²⁺ content was observed. Magnetic hysteresis loops reveal that the Ni-doped ZnO microspheres exhibit ferromagnetic loops at room temperature.     

Characterization of ZnO thin films grown on various substrates by RF magnetron sputtering

In this study we investigated properties of ZnO thin films deposited on both oxygen-containing substrates and a substrate without oxygen content at various O₂/Ar reactant gas ratios. Deposition of ZnO on indium-tin oxide (ITO) resulted in the best crystallinity, whereas the least degree of crystallization was observed from ZnO deposited on glass. All the films were found to have compressive stress, which was relieved by annealing in O₂ environment. ZnO films deposited on glass revealed p-type conductivity when prepared at O₂/Ar ratio of 0.25 whereas those on SiN_x yielded p-type conductivity when prepared at O₂/Ar ratio of 4. In addition, shallower oxygen interstitial seemed to be found from films with better crystallinity. The largest shift in binding energy of Zn_2p3/2 was observed from ZnO prepared on glass at O₂/Ar ratio of 0.25, whereas that of O_1s was obtained from ZnO deposited on SiN_x at O₂/Ar ratio of 4. A model was proposed in terms of O₂ diffusion and hydrogen desorption in order to account for the observed property variations depending on substrates and O₂/Ar ratios.     

Decomposition of chlorinated volatile organic compounds (CVOCs) using NTP coupled with TiO2/GAC,ZnO/GAC,and TiO2–ZnO/GAC in a plasma-assisted catalysis system

No study was found in the literature on the catalytic effect of TiO₂/GAC (Granular activated carbon), ZnO/GAC, and TiO₂–ZnO/GAC combined with non-thermal plasma (NTP) for the decomposition of chlorinated volatile organic compounds (CVOCs) in gas streams. In the present study, this catalytic NTP process was investigated to examine the effect of specific input energy (SIE), initial concentration, as well as residence time on the removal efficiency (RE) of CVOCs in a corona discharge reactor energized by a high frequency pulsed power supply. A dip-coating sol–gel impregnation technique was used to coat TiO₂, ZnO, and mixture of TiO₂–ZnO nanoparticles on GAC, which were then combined with NTP in a two-stage configuration. The results revealed that the efficacy of the catalysts was in the order TiO₂–ZnO/GAC ≅ TiO₂/GAC > ZnO/GAC with chloroform feeding, while when chlorobenzene introduced, the order changed to TiO₂–ZnO/GAC > ZnO/GAC > TiO₂/GAC. A significant enhancement was observed with RE as catalysts coupled with NTP in all cases and a RE of 100% was achieved in the presence of both TiO₂/GAC and TiO₂–ZnO/GAC at SIE of ca. 400 J L⁻¹. Considerable improvement was also noticed for coupling TiO₂ and ZnO in both efficiency and catalyst life time.     

Nitrogen oxides and ammonia sensing characteristics of SILAR deposited ZnO thin film

Pure and Sn, Ni doped ZnO thin films were deposited on glass substrates using a novel successive ionic layer adsorption and reaction (SILAR) method at room temperature. Microstructures of the deposited films were optimized by adjusting growth parameters. The variation in resistivity of the ZnO film sensors was performed with rapid photothermal processing (RPP). The effect of rapid photothermal processing was found to have an important role in ZnO based sensor sensitivity to NO₂, NH₃. While the undoped ZnO film surface exhibited higher NH₃ sensitivity than that of NO₂, an enhanced NO₂ sensitivity was noticed for the ZnO films doped with Sn and higher NH₃ sensitivity was obtained by Ni doping.     

Ohmic-rectification conversion that is tuned using H2O2 for enhanced rectification and optoelectronic performance in MoS2/ZnO nanorod devices

The characteristics of a p–n junction that consists of MoS₂ thin films and ZnO nanorods grown on heavily-doped n-type Si substrate are reported. The current–voltage characteristics for MoS₂/ZnO nanorod devices exhibit ohmic conduction. The measured current is limited by thermionic emission in MoS₂/ZnO nanorod devices that are treated with H₂O₂. H₂O₂ treatment results in the modification of the MoS₂–ZnO interface, so the rectification performance for MoS₂/ZnO nanorod devices is improved. H₂O₂ treatment also increases the responsivity of MoS₂/ZnO nanorod devices to solar irradiation. This phenomenon is caused by induced ohmic-rectification conversion due to H₂O₂ treatment.     

Effect of the reaction conditions on the formation of the ZnO nanostructures

ZnO nanorods were synthesized through a simple chemical method by reacting Zn(C₂H₃O₂)₂·2H₂O and NaOH at low temperature and the effects of changing the order of addition of reactants on the morphological evolution of ZnO nanorods were investigated. The samples were characterized by using XRD, SEM, EDX, TEM, BET and Raman techniques. Optical properties of the ZnO nanostructures were too investigated by UV–Vis spectroscopy at room temperature.The hexagonal wurtzite phase of ZnO was confirmed by X-ray diffraction (XRD) for all the samples. SEM and TEM analysis indicated that different morphologies were obtained by changing the order of addition of reactants.     

Facile fabrication of forest‐like ZnO hierarchical structures on conductive fabric substrate

Forest‐like ZnO hierarchical structures were synthesized on the conductive fabric substrate via a simple one‐step electrochemical deposition process. By applying externally a high cathodic voltage to the samples, ZnO microrods were aligned on the seed coated layer and then ZnO branches were formed on the pillars of ZnO microrods, which was caused by the strong deposition potential between the pillars of ZnO microrods and the Zn²⁺ dissolved in growth solution. At the external cathodic voltage of –3 V, the optimized forest‐like ZnO hierarchical structures exhibited high density, high porosity, and good crystallinity. These fabricated forest‐like ZnO hierarchical structures are potentially useful for electronic and chemical sensing applications. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Growth of InN thin films on ZnO substrate by plasma-assisted molecular beam epitaxy

We have studied the microstructure property of InN epitaxial films grown on ZnO substrate by plasma-assisted molecular beam epitaxy. We found that the In₂O₃ compound was produced on ZnO substrate and many pits were formed on the InN films when InN was directly grown on ZnO substrate with the N/In flux ratio less than 40. We demonstrated that the quality of InN film was significantly improved when the In₂O₃ layer was used as a buffer to prevent the reaction between In and the ZnO substrate.     

离子束增强沉积制备p型氧化锌薄膜及其机理研究

采用离子束增强沉积方法在Si和SiO₂/Si衬底上制备In-N共掺杂ZnO薄膜(INZO)，溅射靶是用ZnO和2 atm% In₂O₃粉体均匀混合并压制而成，在氩离子溅射ZnO靶的同时，氮、氩混合离子束垂直注入沉积的薄膜.实验结果显示INZO薄膜具有(002)的择优取向，并且为p型导电，电阻率最低为0.9Ωcm.薄膜在氮气、氧气气氛下退火，对薄膜的结构和电学特性与成膜和退火条件的关系进行了分析. 关键词： 氧化锌薄膜 p型掺杂 离子束增强沉积