掺杂PbSe/PVA量子点的光致聚合物全息特性

通过原位合成法以聚乙烯醇辅助合成了6.5nm、10nm和15nm的PbSe量子点,研究了掺杂PbSe量子点的光致聚合物的全息特性.将三种尺寸的PbSe量子点按不同浓度分别掺入光致聚合物中,制成无机-有机复合型光致聚合物膜,并对其全息性能进行研究.复合聚合物膜的UV-Vis吸收光谱表明掺入的PbSe量子点并未与聚合物中的有机组分发生化学反应.采用氩氪离子激光器输出的647nm红光研究了复合聚合物膜的透过率和全息记录光栅的布喇格偏移与衍射效率.透过率曲线表明PbSe量子点在复合聚合物膜中分散良好,膜表面均匀.由于PbSe量子点在聚合物链中起支撑作用,复合聚合物膜在全息记录过程中不易发生形变,从而增加了聚合物膜的抗缩皱能力.衍射效率曲线表明掺入PbSe量子点的复合聚合物膜的衍射效率比未掺杂的有所提高.此外,体系存在一个最优值,当掺入平均粒径为10nm且浓度为3.6×10-6 mol/L的PbSe量子点时,样品的透过率达到84%,衍射效率从67.2%提升到89.7%,缩皱率降低到0.8%,极大提高了材料的全息性能.     

掺杂修饰与未修饰Fe_3O_4纳米粒子的光致聚合物全息性能

制备了未修饰以及用柠檬酸钠修饰的两种磁性Fe3O4纳米粒子,并研究了将其掺入到有机光致聚合物中的全息性能,阐述了形成光栅的双扩散原理及抗皱原因.研究表明:掺入这两种纳米粒子后,材料的全息性能均有所提高,但掺入修饰后纳米粒子的全息性能更为突出,衍射效率可达90%,空间折射率调制度达2.14×10-3,缩皱率降低至0.8%,说明经柠檬酸钠修饰后的Fe3O4纳米粒子更有利于提高光致聚合物的全息性能.     

丙烯酰胺基光致聚合物全息光栅的动力学研究

研究了光致聚合物的光化学反应和单体扩散反应的理论模型及动力学参数. 合成了以聚乙烯醇为粘结剂,三乙醇胺为引发剂,藻红B敏化的丙烯酰胺基光致聚合物全息存储材料,通过对测定的透过率和衍射效率进行曲线拟合,分析了染料浓度对光致聚合物的摩尔吸收系数ε、量子产率Φ和光化漂白速率常数k等光化动力学参数的影响规律,以及曝光强度对聚合反应速率k₀、扩散时间常数τ_D和最大折射率调制度Δn等扩散动力 关键词： 光致聚合物 透过率 衍射效率 动力学参数     

用SAXS和XRD方法研究TiO2纳米颗粒微观结构

用溶胶-凝胶方法制备了TiO₂纳米样品,并对该样品在300℃到800℃温度区域进行了退火处理.应用同步辐射X射线粉末衍射(XRD)方法研究了经不同热处理温度的TiO₂纳米颗粒的结构相变.应用同步辐射小角X射线散射(SAXS)方法研究了TiO₂纳米颗粒的表面分形与界面特性.得到纳米颗粒粒度与退火温度的变化规律,讨论了表面界面特征与相变的关系. 关键词： X射线小角散射 X射线衍射 2纳米颗粒')" href="#">TiO₂纳米颗粒     

含双引发剂的光致聚合物全息特性研究

制备了一种三乙醇胺与N-苯基苷氨酸为共同引发剂的丙烯酰胺基光致聚合物全息存储材料,并用He-Ne 激光器633 nm波长的光对样品进行曝光测试.实验表明,与单引发剂的光致聚合物相比,薄膜的质量有一定的提高,在曝光灵敏度变化不大的情况下,衍射效率有很大提高.优化两种引发剂浓度后,此种共同引发的光致聚合物材料呈现的衍射效率达到54%,曝光灵敏度为1.85×10－2cm2/mJ.还研究了此种光致聚合物的透过率随曝光时间和曝光强度的变化,说明此种光致聚合物材料内部均匀性好,对光的散射小.     

番红花红T光敏感光致聚合物全息存储材料

制备了一种以番红花红T为光敏剂的新型全息存储材料,主要用Ar⁺激光器的514.5nm波长的绿光研究材料的全息特性.研究表明,该材料具有较高的衍射效率、曝光灵敏度和较大的折射率调制度,衍射效率近40%,灵敏度为7.22×10^-4cm²/mJ,折射率调制度为3.65×10^-4,同时,在读出时必须考虑布拉格偏移对全息存储的影响.在介质膜中存储了全息图像,再现图像较为清晰,说明该材料适合用作高密度全息存储介质. 关键词： 全息存储 光致聚合物 衍射效率 布拉格偏移     

吖啶橙敏化的光致聚合物及其数字全息存储研究

制备了一种吖啶橙敏化的光致聚合物材料,并研究了材料的全息特性.用Ar+激光器三种波长的光对材料进行记录.结果表明,该材料具有较高的衍射效率、较高的曝光灵敏度和较大的折射率调制度,最大衍射效率均大于40%.将计算机二进制文件经过编码生成的二值图像存入样品,其再现图像较为清晰,译码后能够准确地还原出原文,表明该光致聚合物适合数字全息存储.     

超亲水性SiO2-TiO2纳米颗粒阵列结构的制备与性能研究

用分子自组装的方法在玻璃衬底上分别制备了TiO₂纳米颗粒层和SiO₂-TiO₂复合纳米颗粒阵列结构. 其中,SiO₂ 纳米颗粒层用旋涂法制备,得到密排阵列结构,而TiO₂纳米颗粒层则用浸渍提拉法制备. 文章分析了TiO₂纳米颗粒层和SiO₂-TiO₂复合纳米颗粒阵列结构的理论粗糙度,并通过扫描电子显微镜研究了它们的微观结构,用接触角 关键词： 自清洁 表面粗糙度 光催化 分子自组装     

新型绿光敏感光致聚合物高密度全息存储特性

用实验方法研究了一种新合成的绿光敏感光致聚合物的高密度全息存储性质.结果表明该种光致聚合物具有较高的衍射效率、大的动态范围和折射率调制度,适合做高密度数字全息存储的记录材料,但材料的灵敏度需要提高,同时读出过程必须考虑曝光过程所导致的布拉格偏移;利用角度复用技术在样品的同一位置记录了20个数字化数据信息页,存储密度达到0.125GBcm3,平均误码率达到5.15×10 关键词： 光致聚合物 高密度数字全息存储 布拉格偏移     

红敏聚乙烯醇/丙烯酰胺体系光致聚合物全息记录材料的空间分辨力增强研究

针对目前聚乙烯醇/丙烯酰胺体系光致聚合物材料的空间分辨力不高的问题,提出了一种采用低相对分子质量的聚乙烯醇作为成膜剂来改进光致聚合物分辨力的新方法.采用不同相对分子质量(72000,15000,9000)的聚乙烯醇成膜剂制成光致聚合物,对其衍射效率和空间分辨力等指标进行了对比实验.实验表明选用低相对分子质量(9000)的成膜剂可将该体系光致聚合物的分辨力提高到3000 line/mm以上,实验中仅需40 mJ/cm2左右的曝光量即可获得85%的衍射效率.另外,还对该材料的全息存储特性及其在角度复用全息存储方面的初步应用结果进行了报道.     

Holographic properties of Fe3O4 nanoparticle-doped organic–inorganic hybrid photopolymer

An organic–inorganic hybrid photopolymer doped with sodium-citrate-coated Fe₃O₄ nanoparticles was fabricated. The experimental results showed that the maximum diffraction efficiency could be increased from 69 to 90%, and the maximum refractive index modulation improved from 1.386 × 10⁻³ to 2.083 × 10⁻³. It also found that the volume shrinkage during holographic exposure was noticeably suppressed without affecting the optical quality of the photopolymer.     

Studies of shrinkage as a result of holographic recording in acrylamide-based photopolymer film

We studied the shrinkage in acrylamide-based photopolymer by measuring the Bragg detuning of transmission diffraction gratings recorded at different slant angles and at different intensities. Transmission diffraction gratings of spatial frequency 1000 lines/mm were recorded in an acrylamide-based photopolymer film having 60±5 μm thickness. We have obtained the grating thickness and the final slant angles from the Bragg curve and hence calculated the shrinkage caused by holographic recording. The shrinkage of the material was evaluated for three different recording intensities 1, 5 and 10 mW/cm², while the total exposure energy was kept constant at 80 mJ/cm². From the experimental results it can be seen that the shrinkage of the material is higher for recording with lower intensities and the corresponding values are 1.9%, 1.3% and 1%.     

Hologram multiplexing in acrylamide hydrophilic photopolymers

Unslanted diffraction gratings are recorded in a 900 μm thick acrylamide photopolymer by means of peristrophic multiplexing. A solid state Nd:YAG (λ = 532 nm) laser is used as the recording beam, with a total incident intensity of 5 mW/cm², and a He-Ne laser as the reconstruction beam. The dye concentration in the photopolymer is optimized so that it does not limit the dynamic range. Nine holograms are recorded using constant exposure time scheduling and variable exposure time scheduling. From the results obtained it may be deduced that optimization of the dye allows us to work in the linear response region of the photopolymer and at the same time obtain high values of diffraction efficiency for each hologram. An exponential increase in exposure time as the number of holograms increases enables the values of diffraction efficiency to be homogenized with regard to the case of constant exposure scheduling. In this way, better use is made of the dynamic range of acrylamide hydrophilic photopolymer.     

Nonlinear diffraction in gratings based on polymer–dispersed TiO 2 nanoparticles

In this letter we report a simple technique to produce volume holographic gratings based on photopolymerizable composites containing TiO₂ nanoparticles. Diffraction gratings with high refractive index modulation amplitude (up to 1.25 × 10⁻²) have been formed due to the periodic distribution of high refractive index nanoparticles in a low refractive index polymer matrix. The diffraction efficiency increases strongly on increasing the nanoparticle concentration. Taking the mixture with 10 wt.% TiO₂ nanoparticles, gratings with high diffraction efficiency, low level of scattering and high transparency in the visible-wavelength range have been obtained. This will ultimately lead to different applications of diffractive optical elements based on nanocomposites. The dependence of the gratings’ diffraction efficiency on the intensity of probe laser pulses at 1064 nm has been explored. It is shown that the nonlinear response of the gratings is attributed mainly to the nonlinear properties of the TiO₂ nanoparticles embedded in the polymer matrix. The mechanism of the grating formation and the reasons for the nonlinear behavior of the diffraction efficiency are discussed.     

The synthesis and kinetic growth of anisotropic silver particles loaded on TiO2 surface by photoelectrochemical reduction method

Silver nanorods with average diameters of 120-230 nm and aspect ratio of 1.7-5.0 were deposited on the surface of TiO₂ films by photoelectrochemical reduction of Ag⁺ to Ag under UV light. The composite films prepared on soda-lime glass substrates were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the TiO₂ film after UV irradiation in AgNO₃ solution is composed of anatase phase TiO₂ and metallic silver with face centered cubic structure. Other compounds cannot be found in the final films. The maximum deposition content of silver particles on the surface of TiO₂ film was obtained with the AgNO₃ concentration of 0.1 M. The kinetic growth rates of silver particles can be controlled by photocatalytic activity of TiO₂ films. The studies suggest that the growth rates of silver particles increase with the enhancement of photocatalytic activity of TiO₂ films. The maximum growth rate of silver particles loaded on TiO₂ films can be up to 0.353 nm min⁻¹ among samples 1#, 2# and 3#, while the corresponding apparent rate constant of TiO₂ is 1.751 × 10⁻³ min⁻¹.     

Dependence of photovoltaic parameters on the size of cations adsorbed by TiO2 photoanode in dye-sensitized solar cells

The effects of “pre-adsorbed cations” in photoanodes on the performances of dye-sensitized solar cells (DSSCs) were studied using two different size cations (K⁺ and guanidine cation (G⁺)). While the DSSCs with optimized K⁺ ions pre-adsorbed photoanodes showed a maximum efficiency of 7.04%, the DSSCs with G⁺ ions pre-adsorbed photoanodes showed an efficiency of 6.73%. DSSCs fabricated with conventional photanodes (without pre-cation adsorption) showed an efficiency of 6.21%. Differences in efficiencies are very likely due to the cation pre-adsorption effects and could be due to a higher number of K⁺ cation adsorption per unit area of TiO₂ surface of the photoanode compared to a smaller number of G⁺ cation adsorption in TiO₂, due to their difference in sizes. This pre-cation adsorption technique can be used to improve the overall efficiency of a DSSC by about 14% fold over the conventional photoanodes use in DSSCs, specially using smaller cations.

     

碱性品红敏化的光致聚合物在441nm短波长的全息存储特性研究

制备了一种以碱性品红为光敏剂的新型全息存储材料,且使用波长为441nm的He—Cd激光器成功研究了材料的全息特性。研究表明,该材料在短波长处仍具有较高的衍射效率、曝光灵敏度和较大的折射率调制度,衍射效率近60％,灵敏度为2．93×101c群／mJ,折射率调制度为8．85×10．。。在存储介质膜中存储了全息图像,再现图像较为清晰,对比度与保真度较为理想,说明该材料具有较好的全息存储性能,适合作为高密度全息存储介质。     

一种核黄素敏化的宽带全息记录材料

制备了一种核黄素敏化的以聚乙烯醇为基质的新型全息存储材料,并研究了材料的全息特性.用Ar+激光器激发的488 nm的蓝光对材料曝光,结果表明该材料具有较高的衍射效率和曝光灵敏度,衍射效率高达53%,灵敏度为3.3 cm2/J,折射率调制度为4.5×10－4.研究了材料的透过率与随时间和入射角度变化的关系,说明在曝光记录过程中有噪音光栅生成.在存储介质膜中存储了全息图像,再现图像较为清晰,说明该材料适合用作高密度全息存储介质.     

番红花红T敏化的新型光致聚合物全息存储材料

制备了一种以番红花红T为光敏剂的新型全息存储材料,实验结果表明,该材料具有较高的衍射效率、曝光灵敏度和较大的折射率调制度等,最大衍射效率约38.5%,折射率调制度为0.547×10－3,在存储介质膜中存储了模拟全息图像,再现图像有较好的保真度,说明该材料适合用作高密度体全息存储介质。