Single AWG based clock extraction from WDM signals with mixed formats and mixed bit-rates

A simple and flexible simultaneous clock extraction for WDM signals with mixed modulation formats and bit-rates is proposed and demonstrated using a single commercial arrayed waveguide grating (AWG), which acts both detuned multi-channel filter and demultiplexer for the input signals. By using an AWG with 100 GHz spacing, clock extraction from transmitted multi-channel nonreturn to zero (NRZ) and NRZ differential phase shift keying (NRZ-DPSK) signals at mixed bit-rates from 10 to 40 Gb/s with 200 GHz spacing is achieved simultaneously. By cascading a clock recovery module, clock signal can be easily recovered from the preprocessed signals with enhanced clock tones.     

Investigation of data-format-transparent multiwavelength all-optical clock recovery using a single FP-SOA

Multiwavelength clock recovery (CR) is desired to perform all-optical parallel processing, which has potential application in optical communication systems that use WDM technology. Fabry-Pérot semiconductor optical amplifier (FP-SOA) can perform the similar filter function as passive FP filter, and can simultaneously provide gain for oscillation pulses in the cavity; it is essentially an active filter. We experimentally demonstrated simultaneous multiwavelength all-optical CR from input 36.47-Gb/s pseudo-return-zero (PRZ) data and non-return-zero (NRZ) data using a single multi-quantum-well (MQW) FP-SOA with facets reflectivity of 30%. The presented multiwavelength CR scheme is also suitable for PSK signals. Dual-channel CR from input two channels 36.47-Gb/s 2²³−1 NRZ-DPSK data located at different wavelength is experimentally demonstrated. This scheme is transparent for data formats, which is very important for next generation optical networks.     

Pattern dependency comparison of four different 40-Gb/s optical duobinary transmitters using low-bandwidth modulators

We investigate the pattern dependency of the 40-Gb/s optical duobinary signals generated by a 10-Gb/s-rated Mach-Zehnder modulator with four different configurations. These configurations correspond to all possible combinations of a 15-GHz-bandwidth low-pass filter and a 0.24-nm bandwidth optical filter used to shape up the duobinary signals. We compare through experiment the back-to-back sensitivities and transmission performances of the duobinary signals for pseudorandom bit sequence lengths of 2⁷-1 and 2³¹-1. The results show that the combination of the 10-Gb/s-rated modulator and the 0.24-nm optical filter exhibits the best performance in terms of both the receiver sensitivity and pattern dependency owing to the good frequency response of the optical filter.     

All-optical clock recovery of 20 Gbit/s NRZ-DPSK signals using polarization-maintaining fiber loop mirror filter and semiconductor optical amplifier fiber ring laser

All-optical clock recovery (CR) from 20 Gbit/s nonreturn-to-zero differential phase-shift-keying (NRZ-DPSK) signals are demonstrated experimentally by using a polarization-maintaining fiber loop mirror filter (PMF-LMF) and a semiconductor optical amplifier (SOA) fiber ring laser. Only by adjusting polarization controller (PC), NRZ-DPSK signals were conveniently and fast converted to pseudo return-to-zero (PRZ) signal via PMF-LMF. Then the PRZ signals are injected into the SOA fiber laser for CR. The recovered clock signals is with the extinction ratio (ER) of 10 dB and the root-mean-square (RMS) timing jitter of 750 fs in 2³¹ − 1 long pseudorandom binary sequence (PRBS) NRZ-DPSK signals measurement. Moreover, the broad wavelength tunability of recovered clock stemmed from the use of SOAs as modulator and the gain medium are shown too.     

10、20、40Gb/s速率下恶化信号的光时钟提取

报道了一种全部由10GHz带宽的元件构成的、用于时钟提取的双环注入锁模光纤激光器.这种装置集光电振荡器(OEO)与注入锁模光纤激光器的优点于一体,利用它不仅从恶化的数据信号中实现了10Gb/s的位时钟提取,在采用了光电振荡器的分频、锁模光纤激光器的有理谐波锁模以及F-P梳状滤波器的频率倍乘技术以后,还从20Gb/s和40Gb/s的恶化信号中提取出了位时钟.该方案的另一个优点是无码型效应.     

10 Gb/s全光3R再生的研究

报道了对10Gb／s恶化数据信号的全光3R(再放大、再定时、再整形)再生的实验研究。针对利用基于半导体光放大器的注入锁模环形激光器进行时钟恢复时的码型效应问题,提出了利用梳状滤波器对信号进行预处理。利用这个技术极大的减小了由于码型效应造成的时钟信号的幅度和时间抖动,从恶化的数据信号中恢复出无码型效应的高质量光时钟脉冲。信号整形的关键是光判决门,性能良好的判决门可以进一步提高信号的消光比、减小抖动。研究了基于电吸收调制器的信号再整形。利用上述器件构成的3R再生器,实现了10Gb／s恶化信号的全光3R再生。     

High-Order Ultrawideband Pulse Generation from NRZ-DPSK Signals

A simple method to generate ultrawideband （UWB） doublet and triplet from nonreturn-to-zero （NRZ） differential phase shift keying （DPSK） signals is proposed and experimentally demonstrated. The proposed configuration consists of a Mach-Zehnder modulator （MZM） to generate NRZ-DPSK signals, a section of single-mode fibre to form a microwave bandpass filter, which is used to generate doublet pulses, and a Gaussian optical bandpass filter （OBF）, which serves as a frequency discriminator to generate higher-order UWB pulses. A pair of polarity- reversed triplet pulses is achieved by locating the optical carrier at the positive and negative linear Mopes of the OBF, where the OBF detuning is 0.12nm and -0.2 nm, respectively. The spectra of the pair of UWB triplets have a central frequency of 5 GHz and 5.6 GHz, and have a -10 dB bandwidth of 6.9 GHz and 8.1 GHz, respectively. The UWB pulses remain doublet shape when the light wavelength is located at the peak of the OBF. The spectrum of the doublet has a central frequency of 5.6 GHz and a -10 dB bandwidth of 6.9 GHz.     

Variable single-passband narrowband optical filter based on forward stimulated interpolarization scattering in photonic crystal fiber

A variable transmission spectrum single-passband narrowband optical filter is proposed and experimentally demonstrated. It is based on forward stimulated interpolarization scattering (SIPS) in a photonic crystal fiber by applying a differential quadrature phase-shift keying modulation to the pump wave to broaden and shape the SIPS gain spectrum. By choosing the bit rate of the modulation data pattern, a flat-top steep-cutoff optical bandpass filter with a 3?dB bandwidth of 70?MHz and a 10?dB bandwidth of 90?MHz is realized. In addition, a variable narrowband optical notch filter is also realized by attenuation of the pump wave.     

Tunable Single-Passband Microwave Photonic Filter Based on Sagnac Loop and Fabry-Perot Laser Diode

A tunable single-passband microwave photonic filter is proposed and demonstrated, based on a laser diode(LD)array with multiple optical carriers and a Fabry-Perot(F-P) laser diode. Multiple optical carriers in conjunction with the F-P LD will realize a filter with multiple passbands. By adjusting the wavelengths of the multiple optical carriers, multiple passbands are merged into a single passband with a broadened bandwidth. By varying the number of the optical carrier, the bandwidth can be adjusted. The central frequency can be tuned by adjusting the wavelength of the multiple optical carriers simultaneously. A single-passband filter implemented by two optical carriers is experimentally demonstrated.     

Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

A simple method for clock recovery

All optical bit clock recovery is one of the key technologies for all optical 3R recovery. In this paper, a simple method applying the combination of Fabry–Perot (F–P) filter and semiconductor optical amplifier (SOA) for clock recovery is proposed. The effect of the F–P filter finesse on the clock recovery and the reduction in the amplitude fluctuation of the clock pulse by the SOA are discussed theoretically. With this technology 10 Gbit/s clock recovery with equal amplitude and wavelength transparency was realized experimentally.     

Random bit generation using an optically injected semiconductor laser in chaos with oversampling

Random bit generation is experimentally demonstrated using a semiconductor laser driven into chaos by optical injection. The laser is not subject to any feedback so that the chaotic waveform possesses very little autocorrelation. Random bit generation is achieved at a sampling rate of 10 GHz even when only a fractional bandwidth of 1.5 GHz within a much broader chaotic bandwidth is digitized. By retaining only 3 least significant bits per sample, an output bit rate of 30 Gbps is attained. The approach requires no complicated postprocessing and has no stringent requirement on the electronics bandwidth.     

All-Optical RZ to NRZ Format Conversion Using Single SOA Assisted by Optical Band-Pass Filter

We propose a novel all-optical format conversion from the return-to-zero （RZ） to the non-return-to-zero （NRZ） based on single semiconductor optical amplifier （SOA） and optical band-pass filter （OBE）. We demonstrate the proof of the principle experiment at 10 Gbps by using the test SOA and OBF converter. The format conversion can be achieved with output extinction ratio of 11.51 dB. The BER is 5.5×10^-9 when the power of NRZ is - 10 dBm. The proposed scheme is robust and potential for applications in optical networks.     

Magneto-Optic Fiber Gratings Useful for Dynamic Dispersion Management and Tunable Comb Filtering

Intelligent control of dispersion management and tunable comb filtering in optical network appfications can be performed by using magneto-optic fiber Bragg gratings （MFBGs）. When a nonuniform magnetic field is applied to the MFBG with a constant grating period, the resulting grating response is equivalent to that of a conventional chirped grating. Under a linearly nonuniform magnetic field along the grating, a linear dispersion is achieved in the grating bandgap and the maximal dispersion slope can come to 1260ps/nm2 for a l0-mm-long fiber grating at 1550nm window. Similarly, a Gaussian-apodizing sarnpled MFBG is also useful for magnetically tunable comb filtering, with potential application to clock recovery from return-to-zero optical signals and optical carrier tracking.     

一种新型多速率归零码全光帧时钟提取系统

提出了一种新型的、低成本的多速率归零(RZ)码全光帧时钟提取方案。采用低精细度的法布里-珀罗滤波器(F-P)直接提取不同速率的帧时钟,保证帧时钟的快速建立和快速消失。利用不同的偏振延时干涉仪(PDI)和低自由光谱区(FSR)的法布里-珀罗滤波器构成组合滤波器以实现多速率帧时钟提取。利用半导体光放大器(SOA)的自增益调制效应(SGM)对组合滤波器提取的帧时钟进行整形,降低帧时钟的幅度噪声和时间抖动。实验中,利用光开关切换不同的偏振延时干涉仪构成不同自由光谱区的组合滤波器实现了10 GHz、20 GHz和40 GHz的帧时钟提取,得到了高质量、低时间抖动的多速率帧时钟信号。     

The bit pattern effect on all-optical clock recovery using tank circuits and birefringent resonators

In this paper we discuss the bit pattern effect on optical clock signals recovered using tank circuits and using birefringent resonators. For the first time we compare the bit pattern dependence of the clock signals recovered from both schemes. We show that a birefringent resonator can recover the clock for the same number of consecutive zeros as the optical tank circuit. We also show quantitatively that the fluctuation of the clock signal amplitude is less for the birefringent resonator than the optical tank circuit. These results are obtained numerically and confirmed experimentally.     

Optical rigidity in signal-recycled configurations of laser gravitational-wave detectors

We analyze laser gravitational-wave interferometers with additional mirror in signal port (signal-recycled configurations) which use the optical rigidity both for the Advanced LIGO (Fabry–Perot/Michelson) and GEO-600 (pure Michelson) topologies. We found a set of parameters to obtain better than Standard Quantum Limit (SQL) sensitivity without increasing laser pumping. The gain in sensitivity is inversely proportional to the bandwidth inside which this gain is achieved. By varying parameters one can change the shape of sensitivity curve from a single minimum curve to a double minimum curve through different regimes. This gives an additional possibility to increase the bandwidth but at the sacrifice of sensitivity. We also show that our “narrow band” regimes provide the gain in signal to noise ratio even for signals with wide spectrum.     

Performance analysis of an all-optical wavelength converter based on XPM in semiconductor optical amplifiers

Performance analysis is carried out for an all-optical wavelength converter based on cross-phase modulation in two semiconductor optical amplifiers (SOAs) arranged in a Mach–Zehnder interferometer configuration to evaluate the efficiency of conversion and the signal-to-crosstalk ratio (SCR) at the output of the converter. The results evaluated analytically for input non-return to zero signal at a bit rate of 10 Gb/s show that conversion is possible over a wavelength separation of 2 nm between the pump and the input wavelengths. It is further noticed that SCR of the order of 50 dB or more can be achieved at a bit rate of 10 Gb/s, optical amplifier bandwidth of 10 times bit rate and driving current of 600 mA when the input pump is 60% of saturation intensity. The range of wavelength conversion can further be increased by increasing the driving current.     

Bandwidth tuning of hybrid liquid-crystal Šolc filters based on an optical cancelling technique

We demonstrate that in addition to their role in tuning the wavelength of an N-stage hybrid liquid-crystal Šolc filter, liquid-crystal cells can also be used to vary the transmission bandwidth of such filter around any of the tuned wavelength. This bandwidth tuning is based on the variation of the number of stages by what we call here an “optical cancelling technique”. This is achieved by varying the birefringence of the liquid-crystal cells whose optical path difference switches between two particular values. We show that for a 10-stage filter and at λ_i = 1.532 μm, the calculated 3-dB bandwidth varies from 2.6 to 11.8 nm when the number of “optically-cancelled” hybrid plates increases from 0 to 8. During the tuning process, the contrast ratio remains equal to that of the equivalent classical Šolc filter.     

All-optical NRZ-to-RZ format conversion with dual channel wavelength multicasting functions exploiting cross-phase modulation in a dispersion-flattened nonlinear photonic crystal fiber

All-optical single-to-dual channel format conversion from NRZ to RZ at 10 Gbit/s using cross phase modulation (XPM) in dispersion flattened highly nonlinear photonic crystal fiber (DF-HNL-PCF) is demonstrated. Format conversion with dual channels signal multicasting function is achieved by filtering simultaneously the blue- and red-chirped components of broadened optical spectrum induced by XPM between NRZ signal and clock light. Moreover, the wavelength tunability and dynamics characteristics of proposed format converter are also exploited experimentally by using NRZ signal light with different central wavelength and varying input power. Our results show that a wide wavelength operation range of 21.2 nm, extinction ratio (ER) and Q factor of over 10.9 dB and 6.1 are obtained. Furthermore, the influence of central wavelength offset of optical bandpass filter on converted RZ signal quality is investigated. The proposed scheme is simple, robust, and transparent to bit rate, which makes it very potential for application in future photonic networks.