岩盐结构氧化锌物态方程的分子动力学模拟

利用分子动力学方法和有效经验对势模型对ZnO岩盐结构高温高压下的物态方程进行了研究， 发现分子动力学方法得到的ZnO岩盐结构的摩尔体积(300?1273 K，3.2?10.4 GPa)和实验结果吻合；另外，基于经验势模型的可靠性预测了1373?2273 K和0? 50 GPa的ZnO岩盐结构的P-V -T关系，并利用相应的热力学公式拟合得到了ZnO岩盐结构常态下的线性热膨胀系数、等温体模量及其对压力的一阶导数等重要的热力学参量．     

Molecular dynamics simulation of P-V-T relationship of ZnO with rock-salt structure using pair-wise interactions

Molecular dynamics (MD) method is used to investigate the behavior of the pressure-volume-temperature (P-V-T) relationship, lattice constant and thermal expansivity for ZnO with rock-salt structure at high pressures and temperatures. The interionic potential is taken to be the sum of pair-wise additive Coulomb, van der Waals attraction, and repulsive interactions. The isothermal and isobaric properties are discussed from the corresponding P-V-T relationship, and it is shown that the MD simulation is successful in reproducing the measured volumes of ZnO over a wide range of temperature and pressure. Meanwhile, the equations of state parameters including lattice constant, linear thermal expansion coefficient, and isothermal bulk modulus are calculated and compared with the available experimental data and the latest theoretical results. At an extended pressure and temperature range, P-V-T relationship, lattice constant, and linear thermal expansion coefficient have been predicted. The structural and thermodynamic properties of ZnO with rock-salt structure are summarized in the pressure 0-100 GPa ranges and the temperature up to 3100 K.     

Heat capacity of ZnO with cubic structure at high temperatures

The heat capacities at constant pressure and constant volume, and thermal expansivity are calculated for ZnO with rocksalt-type and zinc-blende-type cubic structures over a wide range of temperatures using molecular dynamics simulations with interactions due to effective pair-wise potentials which consist of the Coulomb, dispersion, and repulsion interaction. It is shown that the calculated structural and thermodynamic parameters including lattice constant, thermal-expansion coefficient, isothermal bulk modulus and its pressure derivative at ambient condition are in good agreement with the available experimental data and the latest theoretical results. At extended pressure and temperature ranges, lattice constant and heat capacity have also been predicted. The structural and thermodynamic properties of ZnO with cubic structure are summarized in the 300-1500 K temperature ranges and up to 100 kbar pressure.     

Mechanical stability and thermodynamic properties of OsC from first-principles calculations

The elastic and thermodynamic characteristics of OsC crystal have been predicted through a method of density functional theory within the generalized gradient approximation (GGA). Compared with WC-type OsC, NaCl-type OsC is not only energy unfavorable but also mechanics unstable. The five independent elastic constants (C_ij), bulk modulus (B₀), the dependence of bulk modulus on temperature and pressure as well as the thermal expansion coefficient (α_V) at various temperatures for WC-type OsC are discussed. According to our calculations, WC-type OsC should be an ultra-incompressible material with high bulk modulus about 381 GPa. In addition, the bulk modulus will increase with increasing pressure while decrease with increasing temperature. The researches on the thermal expansion coefficient indicate that there will be a knee point during the process of thermal expansion coefficient variation versus increasing temperature. Our results may provide useful information for theoretical and experimental investigation of OsC.     

The structural, elastic and thermodynamical properties of zinc-blend structure InN from first principles

A theoretical study of the structural, elastic and thermodynamic properties of the cubic zinc-blende (ZB) structure InN are presented in this paper by performing first principles calculations within local density approximation. The values of lattice constant, bulk modulus and its pressure derivatives and elastic constants are in excellent agreement with the available experimental data and other theoretical results. It is found that the ZB structure InN should be unstable above 20 GPa mechanically. The pressure and temperature dependencies of the bulk modulus, the heat capacity and the thermal expansion coefficient and the entropy S, as well as the Grüneisen parameter are obtained by the quasi-harmonic Debye model in the ranges of 0-1500 K and 0-25 GPa.     

First-principles investigation on the structural and elastic properties of cubic-Fe_2 TiAl under high pressures

The structural, elastic, and thermodynamic properties of cubic-Fe 2 TiAl under high temperatures and pressures are investigated by performing ab initio calculation and using the quasi-harmonic Debye model. Some ground state properties such as lattice constant, bulk modulus, pressure derivative of the bulk modulus, and elastic constants are in good agreement with the available experimental results and theoretical data. The thermodynamic properties of Fe 2 TiAl such as thermal expansion coefficient, Debye temperature, and heat capacity in ranges of 0 K-1200 K and 0 GPa-250 GPa are also obtained. The calculation results indicate that the heat capacities at different pressures all increase with temperature increasing and are close to the Dulong-Petit limit at higher temperatures, Debye temperature decreases with temperature increasing, and increases with pressure rising. The cubic-Fe 2 TiAl is stable mechanically under 250 GPa. Moreover, under lower pressure, thermal expansion coefficient rises rapidly with temperature increasing, and the increasing rate becomes slow at higher pressure.     

Simulated equation of state of CaF2 with fluorite-type structure at high temperature and high pressure

The pressure-volume-temperature (P-V-T) equation of state (EOS), isothermal bulk modulus, and thermal expansivity of CaF₂ with cubic fluorite-type structure are investigated using the constant temperature and pressure shell model molecular dynamics (MD) method with effective pair potentials which consist of the Coulomb, dispersion, and repulsion interaction. It was shown that MD simulation is very successful in accurately reproducing the measured volumes of the CaF₂ over a wide range of pressures. The simulated P-V data matched X-ray diffraction experimental results up to 9.5 GPa at 300 K. In addition, volume thermal-expansion coefficient and isothermal bulk modulus were also calculated and compared with available experimental data and the latest theoretical results at ambient condition. At extended temperature and pressure ranges, The P-V EOS under different isotherms at selected temperatures, T-V EOS under different isobars at selected pressures, thermal expansivity, and isothermal bulk modulus were predicted up to 1500 K and 10 GPa. The detailed knowledge of thermodynamic behavior and EOS at extreme conditions are of fundamental importance to the understanding of the physical properties of CaF₂.     

Cu_3N弹性和热力学性质的第一性原理研究

利用基于密度泛函理论的第一性原理全势线性缀加平面波方法,研究了立方反ReO3结构Cu3N在零温(0K)零压下的平衡晶格常数、体弹模量及其对压强的一阶导数,计算结果与其他实验及理论结果基本相符.同时得出Cu3N的弹性常数,Poisson比等,并分析出Cu3N在零温零压下是稳定的.通过准谐Debye模型计算Cu3N的热力学性质,得到了Cu3N的晶格常数、等压比热容、等容比热容、热胀系数与温度和压强之间的关系,同时计算出不同温度不同压强下其体弹模量及Debye温度的值。     

高温高压下闪锌矿相GaN结构和热力学特性的分子动力学研究

利用分子动力学方法和Buckingham经验势模型对重要半导体材料GaN立方闪锌矿相的晶格常数、相变压力(从闪锌矿到岩盐结构)、热膨胀、等温体模量、定压热容等结构和热力学特性在300—3000K的温度范围和0—65GPa的压力范围内进行了研究.研究表明，闪锌矿相GaN常态下的结构和热力学参数的模拟结果与实验数据及其他理论结果相符.同时在所选作用势模型可靠性检验的基础上，对等温体模量、定压热容诸非谐性参量在高温高压下的热力学行为进行了预测.所得结果在材料科学等领域的研究中具有一定的应用背景和参考价值. 关键词： GaN Buckingham势 分子动力学模拟 高温高压     

常压下固态KNO2热力学性质的密度泛函理论研究

采用密度泛函理论结合准谐德拜模型研究常压下300~725 K间KNO₂立方结构的热力学性质,重点分析常压下定压热容、定容热容、熵、德拜温度、体膨胀系数、平衡体积和体弹模量随温度的变化.结果显示,常压下计算的定压热容随温度的变化与实验数据符合较好,而计算的熵与实验数据相差较大.计算得到KNO₂的平均体膨胀系数约为1.837 8×10^-5K^-1,常温下(300 K)KNO₂的德拜温度约为667.13K.     

A first-principle study of the structural, elastic, lattice dynamical and thermodynamic properties of PrX (X=P, As)

The structural, phase transition, elastic, lattice dynamic and thermodynamic properties of rare-earth compounds PrP and PrAs with NaCl (B1), CsCl (B2), ZB (B3), WC (B_h) and CuAu (L1₀) structures are investigated using the first principles calculations within the generalized gradient approximation (GGA). For the total-energy calculation, we have used the projected augmented plane-wave (PAW) implementation of the Vienna Ab-initio Simulation Package (VASP). Specifically, some basic physical parameters, e.g. lattice constants, bulk modulus, elastic constants, shear modulus, Young's modulus and Poison's ratio, are predicted. The obtained equilibrium structure parameters are in excellent agreement with the experimental and theoretical data. The temperature and pressure variations of the volume, bulk modulus, thermal expansion coefficient, heat capacity and Debye temperature are calculated in wide pressure and temperature ranges. The phonon dispersion curves and corresponding one-phonon density of states (DOS) for both compounds are also computed in the NaCl (B1) structure.     

Melting and isothermal bulk modulus of the rocksalt phase of ZnO with molecular dynamics simulation

The Buckingham potential has been employed to simulate the melting of the rocksalt phase of ZnO over a wide pressure–temperature range and isothermal bulk modulus with shell model molecular dynamics method. The melting curve from molecular dynamics simulations is in good agreement with the results obtained from Lindemann melting equation in the pressure below 7 GPa. The calculated null compression bulk modulus is compared with the available experimental data and other theoretical results. At extended temperature ranges, the isothermal bulk modulus has also been predicted up to 3000 K.     

Electronic structure,elastic and thermodynamic properties of α-phase Na3N under pressure from first principles

The structural, electronic, elastic and thermodynamic properties of α-phase Na₃N under pressure are investigated by performing first principles calculations within generalized gradient approximation. The elastic constants, bulk modulus, shear modulus, Young's modulus, and Poisson's ratio dependencies on pressure are also calculated. The thermodynamic properties of the α-phase Na₃N are calculated using the quasi-harmonic Debye model. The dependencies of the heat capacity and the thermal expansion coefficient, as well as the Grüneisen parameter on pressure and temperature are investigated systematically in the ranges of 0–1 GPa and 0–100 K.     

Theoretical studies of elastic and thermodynamic properties of cubic B20 CoSi

The full potential linearized augmented plane wave (FP-LAPW) method based on the density functional theory as implemented in the WIEN2k package is applied successfully to the study of the equilibrium lattice parameter and the elastic constants of the cubic B20 structural CoSi. The quasi-harmonic Debye model, in which the phononic effects are considered, is used to investigate the thermodynamic properties of B20 CoSi. Young's modulus and Poisson ratio are obtained from the calculated elastic constants and compared with the available data. The pressure and temperature dependence of the volume, the bulk modulus, the thermal expansion coefficient, the heat capacity and the Debye temperature are successfully obtained in the whole pressure range from 0 to 40 GPa and temperature range from 0 to 1400 K .     

First principle study on the elastic and thermodynamic properties of TiB2 crystal under high temperature

This paper predicts the elastic and thermodynamic characteristics of TiB2 crystal through the method of density functional theory within the generalized gradient approximation(GGA).The five independent elastic constants(Cij),the bulk modulus(B0),the dependence of bulk modulus(B0) on temperature T and pressure P and the coefficient of thermal expansion(αL) at various temperatures have been evaluated and discussed.According to calculation,the bulk modulus will increase with increasing pressure while decrease with the increasing temperature.The coefficient of thermal expansion is consistent with the famous Gruneisen’s law when the temperature is not too high.The obtained results agree well with the experimental and other theoretical results.     

Molecular dynamics simulation of thermodynamic properties of NaCl at high pressures and temperatures

The expansivity, constant-pressure heat capacity, and isothermal bulk modulus of sodium chloride (NaCl) have been obtained by using molecular dynamics method. The calculated thermodynamic parameters are found to be in agreement with the available experimental data. At an extended temperature and pressure ranges, these parameters have also been predicted. The thermodynamic properties of NaCl are summarized in the pressure 0-500 kbar ranges and the temperature up to 1000 K.     

The thermodynamics of elastic deformation—I: Equation of state for solids

The isobaric and isothermal volume derivatives of In B, In μ and In μ' are investigated, where B, μ and μ' are the isothermal bulk modulus and the two shear moduli, respectively, of a cubic crystal. In the case of the bulk modulus, the temperature independence of αB (where α is the volume thermal expansion) for a large number of materials, ensures that the derivatives are constant and approximately equal, while for the shear moduli, evidence is advanced that the isothermal derivatives are constant along an isotherm, but not along an isobar except at high temperatures near the melting point. The relationships satisfied by the bulk modulus enable the explicit temperature and pressure dependence of the molar volume, V, thermal expansion, and bulk modulus to be determined. The most adequate representation of the volume dependence of the Grüneisen parameter, γ, appears to be that γ/V is independent of volume between the Debye and melting temperatures.     

Thermal expansion and compressibility of β-As4S3

Temperature and pressure variation of the lattice constants and unit cell volume have been studied with the help of low temperature Guinier-Simon film technique and energy dispersive high pressure X-ray diffraction. Volume thermal expansion coefficient at room temperature and its derivative have been obtained by fitting the experimental data with volume-temperature equation obtained from purely thermodynamic considerations. Similarly bulk modulus at ambient pressure and its derivative with respect to pressure have been obtained by fitting volume-pressure data with the Murnaghan equation of state. The anisotropy of thermal expansion coefficient and the compressibility have been discussed.     

高压下TiC的弹性、电子结构及热力学性质的第一性原理计算

利用基于密度泛函理论的第一性原理平面波赝势方法 并结合准谐徳拜模型研究了NaCl结构的TiC在高压下的弹性性质、电子结构和热力学性质. 计算所得零温零压下的晶格常数、体弹模量及弹性常数与实验值符合得很好. 零温下弹性常数和弹性模量随压强增大而增大. 通过态密度和电荷密度的分析, Ti-C键随压强增大而增强. 运用准谐德拜模型, 成功计算了TiC在高温高压下的体弹模量、熵、热膨胀系数、徳拜温度、 Grüneisen参数和比热容. 结果表明压强对体弹模量、热膨胀系数和徳拜温度的影响大于温度对其的影响. 热容随着压强升高而减小, 在高温高压下, 热容接近Dulong-Petit极限.     

高温高压下Zr2AlC的结构及热学性质的第一性原理

利用密度泛函理论研究了高温高压下Zr₂AlC的结构和热力学性质,计算得到Zr₂AlC的晶格参数与实验值符合较好．研究了Zr₂AlC的弹性常数、体模量、剪切模量和杨氏模量等力学性质随压力变化的趋势．同时研究了维氏硬度随压力的变化趋势．通过计算得到的杨氏模量预测了Zr₂AlC的弹性各向异性．最后,基于准简谐德拜模型,成功预测了Zr₂AlC的德拜温度、热容、热膨胀系数和Grüneisen参数随着压强和温度的变化关系.